fsMIStdOspfv3IfDemandNbrProbeInterval
SUPERMICRO-MISTDOSPFV3-MIB ·
.1.3.6.1.4.1.10876.101.2.23.1.7.1.23
Object
Defines how often the neighbor will be probed.
Context
- MIB
- SUPERMICRO-MISTDOSPFV3-MIB
- OID
.1.3.6.1.4.1.10876.101.2.23.1.7.1.23- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- fsMIStdOspfv3IfEntry
- Table
- fsMIStdOspfv3IfTable
- Siblings
- 24
Syntax
seconds SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIStdOspfv3IfIndex The interface index of this OSPFv3 interface.
It corresponds to the interface index of the
IPv6 interface on which OSPFv3 is configured. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.10876.101.2.23.1.7.1.1 |
| fsMIStdOspfv3IfPollInterval The larger time interval, in seconds, between
the Hello packets sent to an inactive non-
broadcast multi- access neighbor. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.23.1.7.1.10 |
| fsMIStdOspfv3IfState The OSPFv3 Interface State. | column | Enumeration | .1.3.6.1.4.1.10876.101.2.23.1.7.1.11 |
| fsMIStdOspfv3IfDesignatedRouter The Router ID of the Designated Router. | column | OSPF-MIBRouterID | .1.3.6.1.4.1.10876.101.2.23.1.7.1.12 |
| fsMIStdOspfv3IfBackupDesignatedRouter The Router ID of the Backup Designated
Router. | column | OSPF-MIBRouterID | .1.3.6.1.4.1.10876.101.2.23.1.7.1.13 |
| fsMIStdOspfv3IfEvents The number of times this OSPF interface has
changed its state, or an error has occurred. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.2.23.1.7.1.14 |
| fsMIStdOspfv3IfMulticastForwarding The way multicasts should forwarded on this
interface; not forwarded, forwarded as data
link multicasts, or forwarded as data link uni-
casts. Data link multicasting i… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.23.1.7.1.15 |
| fsMIStdOspfv3IfDemand Indicates whether Demand OSPFv3 procedures (hel-
lo suppression to FULL neighbors and setting the
DoNotAge flag on propagated LSAs) should be per-
formed on this interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.23.1.7.1.16 |
| fsMIStdOspfv3IfMetricValue The metric assigned to this interface.
The default value of the Metric is
Reference Bandwidth / ifSpeed. The value of the
reference bandwidth is configured by the
fsMIStdOsp… | column | OSPF-MIBMetric | .1.3.6.1.4.1.10876.101.2.23.1.7.1.17 |
| fsMIStdOspfv3IfLinkScopeLsaCount The total number of Link-Scope link-state
advertisements in this link's link-state database. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.10876.101.2.23.1.7.1.18 |
| fsMIStdOspfv3IfLinkLsaCksumSum The 32-bit unsigned sum of the Link-Scope link-state
advertisements' LS checksums contained in this
link's link-state database. The sum can be used
to determine if there … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.2.23.1.7.1.19 |
| fsMIStdOspfv3IfAreaId A 32-bit integer uniquely identifying the area
to which the interface connects. Area ID
0.0.0.0 is used for the OSPFv3 backbone. | column | OSPF-MIBAreaID | .1.3.6.1.4.1.10876.101.2.23.1.7.1.2 |
| fsMIStdOspfv3IfInstId Enables multiple instances of OSPFv3 to be run over
a single link. Each protocol instance would be assigned
a separate ID. This ID has local link significance
only. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.2.23.1.7.1.20 |
| fsMIStdOspfv3IfDemandNbrProbe Indicates whether or not neighbor probing is
enabled to determine whether or not the neighbor
is inactive. Neighbor probing is disabled by
default. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.23.1.7.1.21 |
| fsMIStdOspfv3IfDemandNbrProbeRetxLimit The number of consecutive LSA retransmissions before
the neighbor is deemed inactive and the neighbor
adjacency is brought down. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.23.1.7.1.22 |
| fsMIStdOspfv3IfContextId A 32-bit unique context id for each entry.
Minimum value is 0 and Maximum depends upon system
configuration. Default value is 0 which will be initialized
during bootup | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.2.23.1.7.1.24 |
| fsMIStdOspfv3IfStatus This variable controls the status of the en-
try. The use of RowStatus is covered in more detail in
[6]. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.10876.101.2.23.1.7.1.25 |
| fsMIStdOspfv3IfType The OSPFv3 interface type. | column | Enumeration | .1.3.6.1.4.1.10876.101.2.23.1.7.1.3 |
| fsMIStdOspfv3IfAdminStat The OSPFv3 interface's administrative status.
The value formed on the interface, and the in-
terface will be advertised as an internal route
to some area. The value 'di… | column | OSPF-MIBStatus | .1.3.6.1.4.1.10876.101.2.23.1.7.1.4 |
| fsMIStdOspfv3IfRtrPriority The priority of this interface. Used in
multi-access networks, this field is used in
the designated router election algorithm. The
value 0 signifies that the router… | column | OSPF-MIBDesignatedRouterPriority | .1.3.6.1.4.1.10876.101.2.23.1.7.1.5 |
| fsMIStdOspfv3IfTransitDelay The estimated number of seconds it takes to
transmit a link state update packet over this
interface. | column | seconds UpToRefreshInterval | .1.3.6.1.4.1.10876.101.2.23.1.7.1.6 |
| fsMIStdOspfv3IfRetransInterval The number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting dat… | column | seconds UpToRefreshInterval | .1.3.6.1.4.1.10876.101.2.23.1.7.1.7 |
| fsMIStdOspfv3IfHelloInterval The length of time, in seconds, between the
Hello packets that the router sends on the in-
terface. This value must be the same for all
routers attached to a common netw… | column | seconds OSPF-MIBHelloRange | .1.3.6.1.4.1.10876.101.2.23.1.7.1.8 |
| fsMIStdOspfv3IfRtrDeadInterval The number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello i… | column | seconds RouterDeadRange | .1.3.6.1.4.1.10876.101.2.23.1.7.1.9 |