fsMIStdOspfv3IfMulticastForwarding

SUPERMICRO-MISTDOSPFV3-MIB · .1.3.6.1.4.1.10876.101.2.23.1.7.1.15
MIB view Table view

Object

column r/w Enumeration 
The way multicasts should  forwarded  on  this 
interface;  not  forwarded,  forwarded  as data 
link multicasts, or forwarded as data link uni- 
casts.   Data link multicasting is not meaning- 
ful on point to point and NBMA interfaces,  and 
setting fsMIStdOspfv3MulticastForwarding to 0 effective- 
ly disables all multicast forwarding.

Context

MIB
SUPERMICRO-MISTDOSPFV3-MIB
OID
.1.3.6.1.4.1.10876.101.2.23.1.7.1.15
Type
column
Access
readwrite
Status
current
Parent
fsMIStdOspfv3IfEntry
Table
fsMIStdOspfv3IfTable
Siblings
24

Syntax

Enumeration

Values & Constraints

Enumerated Values
1blocked
2multicast
3unicast

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsMIStdOspfv3IfIndex
The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.10876.101.2.23.1.7.1.1
fsMIStdOspfv3IfPollInterval
The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor.
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.2.23.1.7.1.10
fsMIStdOspfv3IfState
The OSPFv3 Interface State.
columnEnumeration.1.3.6.1.4.1.10876.101.2.23.1.7.1.11
fsMIStdOspfv3IfDesignatedRouter
The Router ID of the Designated Router.
columnOSPF-MIBRouterID.1.3.6.1.4.1.10876.101.2.23.1.7.1.12
fsMIStdOspfv3IfBackupDesignatedRouter
The Router ID of the Backup Designated Router.
columnOSPF-MIBRouterID.1.3.6.1.4.1.10876.101.2.23.1.7.1.13
fsMIStdOspfv3IfEvents
The number of times this OSPF interface has changed its state, or an error has occurred.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.10876.101.2.23.1.7.1.14
fsMIStdOspfv3IfDemand
Indicates whether Demand OSPFv3 procedures (hel- lo suppression to FULL neighbors and setting the DoNotAge flag on propagated LSAs) should be per- formed on this interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.2.23.1.7.1.16
fsMIStdOspfv3IfMetricValue
The metric assigned to this interface. The default value of the Metric is Reference Bandwidth / ifSpeed. The value of the reference bandwidth is configured by the fsMIStdOsp…
columnOSPF-MIBMetric.1.3.6.1.4.1.10876.101.2.23.1.7.1.17
fsMIStdOspfv3IfLinkScopeLsaCount
The total number of Link-Scope link-state advertisements in this link's link-state database.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.10876.101.2.23.1.7.1.18
fsMIStdOspfv3IfLinkLsaCksumSum
The 32-bit unsigned sum of the Link-Scope link-state advertisements' LS checksums contained in this link's link-state database. The sum can be used to determine if there …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.2.23.1.7.1.19
fsMIStdOspfv3IfAreaId
A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPFv3 backbone.
columnOSPF-MIBAreaID.1.3.6.1.4.1.10876.101.2.23.1.7.1.2
fsMIStdOspfv3IfInstId
Enables multiple instances of OSPFv3 to be run over a single link. Each protocol instance would be assigned a separate ID. This ID has local link significance only.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.2.23.1.7.1.20
fsMIStdOspfv3IfDemandNbrProbe
Indicates whether or not neighbor probing is enabled to determine whether or not the neighbor is inactive. Neighbor probing is disabled by default.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.2.23.1.7.1.21
fsMIStdOspfv3IfDemandNbrProbeRetxLimit
The number of consecutive LSA retransmissions before the neighbor is deemed inactive and the neighbor adjacency is brought down.
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.2.23.1.7.1.22
fsMIStdOspfv3IfDemandNbrProbeInterval
Defines how often the neighbor will be probed.
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.2.23.1.7.1.23
fsMIStdOspfv3IfContextId
A 32-bit unique context id for each entry. Minimum value is 0 and Maximum depends upon system configuration. Default value is 0 which will be initialized during bootup
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.2.23.1.7.1.24
fsMIStdOspfv3IfStatus
This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6].
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.10876.101.2.23.1.7.1.25
fsMIStdOspfv3IfType
The OSPFv3 interface type.
columnEnumeration.1.3.6.1.4.1.10876.101.2.23.1.7.1.3
fsMIStdOspfv3IfAdminStat
The OSPFv3 interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The value 'di…
columnOSPF-MIBStatus.1.3.6.1.4.1.10876.101.2.23.1.7.1.4
fsMIStdOspfv3IfRtrPriority
The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router…
columnOSPF-MIBDesignatedRouterPriority.1.3.6.1.4.1.10876.101.2.23.1.7.1.5
fsMIStdOspfv3IfTransitDelay
The estimated number of seconds it takes to transmit a link state update packet over this interface.
columnseconds UpToRefreshInterval.1.3.6.1.4.1.10876.101.2.23.1.7.1.6
fsMIStdOspfv3IfRetransInterval
The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting dat…
columnseconds UpToRefreshInterval.1.3.6.1.4.1.10876.101.2.23.1.7.1.7
fsMIStdOspfv3IfHelloInterval
The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common netw…
columnseconds OSPF-MIBHelloRange.1.3.6.1.4.1.10876.101.2.23.1.7.1.8
fsMIStdOspfv3IfRtrDeadInterval
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello i…
columnseconds RouterDeadRange.1.3.6.1.4.1.10876.101.2.23.1.7.1.9