fsMIStdOspfv3RouterId
SUPERMICRO-MISTDOSPFV3-MIB ·
.1.3.6.1.4.1.10876.101.2.23.1.1.1.2
Object
A 32-bit integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to the value of one of the router's IPv4 interface addresses if IPv4 is configured on the router.
Context
- MIB
- SUPERMICRO-MISTDOSPFV3-MIB
- OID
.1.3.6.1.4.1.10876.101.2.23.1.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsMIStdOspfv3Entry
- Table
- fsMIStdOspfv3Table
- Siblings
- 22
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIStdOspfv3ContextId A 32-bit unique context id for each entry.
Minimum value is 0 and Maximum depends upon
system configuration. Default value is 0 which
will be initialized during bootup | column | Integer32 | .1.3.6.1.4.1.10876.101.2.23.1.1.1.1 |
| fsMIStdOspfv3RxNewLsas The number of link-state advertisements re-
ceived determined to be new instantiations.
This number does not include newer instantia-
tions of self-originated link-st… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.2.23.1.1.1.10 |
| fsMIStdOspfv3ExtLsaCount The number of External(LS type 0x4005) in the link-
state database | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.10876.101.2.23.1.1.1.11 |
| fsMIStdOspfv3ExtAreaLsdbLimit The maximum number of non-default AS-
external-LSAs entries that can be stored in the
link-state database. If the value is -1, then
there is no limit.
… | column | Integer32 | .1.3.6.1.4.1.10876.101.2.23.1.1.1.12 |
| fsMIStdOspfv3MulticastExtensions A Bit Mask indicating whether the router is
forwarding IPv6 multicast datagrams
based on the algorithms defined in the Multi-
cast Extensions to OSPF.
If intra… | column | Bits | .1.3.6.1.4.1.10876.101.2.23.1.1.1.13 |
| fsMIStdOspfv3ExitOverflowInterval The number of seconds that, after entering
OverflowState, a router will attempt to leave
OverflowState. This allows the router to again
originate non-default AS-Extern… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.23.1.1.1.14 |
| fsMIStdOspfv3DemandExtensions The router's support for demand routing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.23.1.1.1.15 |
| fsMIStdOspfv3TrafficEngineeringSupport The router's support for traffic engineering
extensions. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.23.1.1.1.16 |
| fsMIStdOspfv3ReferenceBandwidth Reference bandwidth in kilobits/second for
calculating default interface metrics. The
default value is 100,000 KBPS (100 MBPS) | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.23.1.1.1.17 |
| fsMIStdOspfv3RestartSupport The router's support for OSPF hitless restart.
Options include: no restart support, only planned
restarts or both planned and unplanned restarts. | column | Enumeration | .1.3.6.1.4.1.10876.101.2.23.1.1.1.18 |
| fsMIStdOspfv3RestartInterval Configured OSPF hitless restart timeout interval. | column | seconds UpToRefreshInterval | .1.3.6.1.4.1.10876.101.2.23.1.1.1.19 |
| fsMIStdOspfv3RestartStatus Current status of OSPF hitless restart. | column | Enumeration | .1.3.6.1.4.1.10876.101.2.23.1.1.1.20 |
| fsMIStdOspfv3RestartAge Remaining time in current OSPF hitless restart
interval. | column | seconds UpToRefreshInterval | .1.3.6.1.4.1.10876.101.2.23.1.1.1.21 |
| fsMIStdOspfv3RestartExitReason Describes the outcome of the last attempt at a
hitless restart. If the value is 'none', no restart
has yet been attempted. If the value is 'inProgress',
a restart attempt is… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.23.1.1.1.22 |
| fsMIStdOspfv3Status This variable displays the status of the en-
try. The internal effect (row removal) is
implementation dependent. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.10876.101.2.23.1.1.1.23 |
| fsMIStdOspfv3AdminStat The administrative status of OSPFv3 in the
router. The value 'enabled' denotes that the
OSPFv3 Process is active on at least one inter-
face; 'disabled' disables … | column | OSPF-MIBStatus | .1.3.6.1.4.1.10876.101.2.23.1.1.1.3 |
| fsMIStdOspfv3VersionNumber The version number of OSPF for IPv6 is 3. | column | Enumeration | .1.3.6.1.4.1.10876.101.2.23.1.1.1.4 |
| fsMIStdOspfv3AreaBdrRtrStatus A flag to note whether this router is an area
border router. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.23.1.1.1.5 |
| fsMIStdOspfv3ASBdrRtrStatus A flag to note whether this router is config-
ured as an Autonomous System border router. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.23.1.1.1.6 |
| fsMIStdOspfv3AsScopeLsaCount The number of AS-Scope (e.g. AS-External) link-state
advertisements in the link-state database. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.10876.101.2.23.1.1.1.7 |
| fsMIStdOspfv3AsScopeLsaCksumSum The 32-bit unsigned sum of the LS checksums of
the AS-scoped link-state advertisements con-
tained in the link-state database. This sum
can be used to determine if there h… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.2.23.1.1.1.8 |
| fsMIStdOspfv3OriginateNewLsas The number of new link-state advertisements
that have been originated. This number is in-
cremented each time the router originates a new
LSA. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.2.23.1.1.1.9 |