fsMIStdOspfv3IfMetricValue

SUPERMICRO-MISTDOSPFV3-MIB · .1.3.6.1.4.1.10876.101.2.23.1.7.1.17
MIB view Table view

Object

column r/w OSPF-MIBMetric 
The metric assigned to this interface. 
The default value of the Metric is 
Reference Bandwidth / ifSpeed. The value of the   
reference bandwidth is configured by the 
fsMIStdOspfv3ReferenceBandwidth object.

Context

MIB
SUPERMICRO-MISTDOSPFV3-MIB
OID
.1.3.6.1.4.1.10876.101.2.23.1.7.1.17
Type
column
Access
readwrite
Status
current
Parent
fsMIStdOspfv3IfEntry
Table
fsMIStdOspfv3IfTable
Siblings
24

Syntax

OSPF-MIBMetric
Source
OSPF-MIBMetric
Base type
Integer32

Values & Constraints

Type Constraints
range: 0..65535

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsMIStdOspfv3IfIndex
The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.10876.101.2.23.1.7.1.1
fsMIStdOspfv3IfPollInterval
The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor.
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.2.23.1.7.1.10
fsMIStdOspfv3IfState
The OSPFv3 Interface State.
columnEnumeration.1.3.6.1.4.1.10876.101.2.23.1.7.1.11
fsMIStdOspfv3IfDesignatedRouter
The Router ID of the Designated Router.
columnOSPF-MIBRouterID.1.3.6.1.4.1.10876.101.2.23.1.7.1.12
fsMIStdOspfv3IfBackupDesignatedRouter
The Router ID of the Backup Designated Router.
columnOSPF-MIBRouterID.1.3.6.1.4.1.10876.101.2.23.1.7.1.13
fsMIStdOspfv3IfEvents
The number of times this OSPF interface has changed its state, or an error has occurred.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.10876.101.2.23.1.7.1.14
fsMIStdOspfv3IfMulticastForwarding
The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multicasting i…
columnEnumeration.1.3.6.1.4.1.10876.101.2.23.1.7.1.15
fsMIStdOspfv3IfDemand
Indicates whether Demand OSPFv3 procedures (hel- lo suppression to FULL neighbors and setting the DoNotAge flag on propagated LSAs) should be per- formed on this interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.2.23.1.7.1.16
fsMIStdOspfv3IfLinkScopeLsaCount
The total number of Link-Scope link-state advertisements in this link's link-state database.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.10876.101.2.23.1.7.1.18
fsMIStdOspfv3IfLinkLsaCksumSum
The 32-bit unsigned sum of the Link-Scope link-state advertisements' LS checksums contained in this link's link-state database. The sum can be used to determine if there …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.2.23.1.7.1.19
fsMIStdOspfv3IfAreaId
A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPFv3 backbone.
columnOSPF-MIBAreaID.1.3.6.1.4.1.10876.101.2.23.1.7.1.2
fsMIStdOspfv3IfInstId
Enables multiple instances of OSPFv3 to be run over a single link. Each protocol instance would be assigned a separate ID. This ID has local link significance only.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.2.23.1.7.1.20
fsMIStdOspfv3IfDemandNbrProbe
Indicates whether or not neighbor probing is enabled to determine whether or not the neighbor is inactive. Neighbor probing is disabled by default.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.2.23.1.7.1.21
fsMIStdOspfv3IfDemandNbrProbeRetxLimit
The number of consecutive LSA retransmissions before the neighbor is deemed inactive and the neighbor adjacency is brought down.
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.2.23.1.7.1.22
fsMIStdOspfv3IfDemandNbrProbeInterval
Defines how often the neighbor will be probed.
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.2.23.1.7.1.23
fsMIStdOspfv3IfContextId
A 32-bit unique context id for each entry. Minimum value is 0 and Maximum depends upon system configuration. Default value is 0 which will be initialized during bootup
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.2.23.1.7.1.24
fsMIStdOspfv3IfStatus
This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6].
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.10876.101.2.23.1.7.1.25
fsMIStdOspfv3IfType
The OSPFv3 interface type.
columnEnumeration.1.3.6.1.4.1.10876.101.2.23.1.7.1.3
fsMIStdOspfv3IfAdminStat
The OSPFv3 interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The value 'di…
columnOSPF-MIBStatus.1.3.6.1.4.1.10876.101.2.23.1.7.1.4
fsMIStdOspfv3IfRtrPriority
The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router…
columnOSPF-MIBDesignatedRouterPriority.1.3.6.1.4.1.10876.101.2.23.1.7.1.5
fsMIStdOspfv3IfTransitDelay
The estimated number of seconds it takes to transmit a link state update packet over this interface.
columnseconds UpToRefreshInterval.1.3.6.1.4.1.10876.101.2.23.1.7.1.6
fsMIStdOspfv3IfRetransInterval
The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting dat…
columnseconds UpToRefreshInterval.1.3.6.1.4.1.10876.101.2.23.1.7.1.7
fsMIStdOspfv3IfHelloInterval
The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common netw…
columnseconds OSPF-MIBHelloRange.1.3.6.1.4.1.10876.101.2.23.1.7.1.8
fsMIStdOspfv3IfRtrDeadInterval
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello i…
columnseconds RouterDeadRange.1.3.6.1.4.1.10876.101.2.23.1.7.1.9