fsMIStdOspfv3RestartStatus
SUPERMICRO-MISTDOSPFV3-MIB ·
.1.3.6.1.4.1.10876.101.2.23.1.1.1.20
Object
column
Enumeration
Current status of OSPF hitless restart.
Context
- MIB
- SUPERMICRO-MISTDOSPFV3-MIB
- OID
.1.3.6.1.4.1.10876.101.2.23.1.1.1.20- Type
- column
- Access
- readonly
- Status
- current
- Parent
- fsMIStdOspfv3Entry
- Table
- fsMIStdOspfv3Table
- Siblings
- 22
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | notRestarting |
2 | plannedRestart |
3 | unplannedRestart |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIStdOspfv3ContextId A 32-bit unique context id for each entry.
Minimum value is 0 and Maximum depends upon
system configuration. Default value is 0 which
will be initialized during bootup | column | Integer32 | .1.3.6.1.4.1.10876.101.2.23.1.1.1.1 |
| fsMIStdOspfv3RxNewLsas The number of link-state advertisements re-
ceived determined to be new instantiations.
This number does not include newer instantia-
tions of self-originated link-st… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.2.23.1.1.1.10 |
| fsMIStdOspfv3ExtLsaCount The number of External(LS type 0x4005) in the link-
state database | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.10876.101.2.23.1.1.1.11 |
| fsMIStdOspfv3ExtAreaLsdbLimit The maximum number of non-default AS-
external-LSAs entries that can be stored in the
link-state database. If the value is -1, then
there is no limit.
… | column | Integer32 | .1.3.6.1.4.1.10876.101.2.23.1.1.1.12 |
| fsMIStdOspfv3MulticastExtensions A Bit Mask indicating whether the router is
forwarding IPv6 multicast datagrams
based on the algorithms defined in the Multi-
cast Extensions to OSPF.
If intra… | column | Bits | .1.3.6.1.4.1.10876.101.2.23.1.1.1.13 |
| fsMIStdOspfv3ExitOverflowInterval The number of seconds that, after entering
OverflowState, a router will attempt to leave
OverflowState. This allows the router to again
originate non-default AS-Extern… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.23.1.1.1.14 |
| fsMIStdOspfv3DemandExtensions The router's support for demand routing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.23.1.1.1.15 |
| fsMIStdOspfv3TrafficEngineeringSupport The router's support for traffic engineering
extensions. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.23.1.1.1.16 |
| fsMIStdOspfv3ReferenceBandwidth Reference bandwidth in kilobits/second for
calculating default interface metrics. The
default value is 100,000 KBPS (100 MBPS) | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.23.1.1.1.17 |
| fsMIStdOspfv3RestartSupport The router's support for OSPF hitless restart.
Options include: no restart support, only planned
restarts or both planned and unplanned restarts. | column | Enumeration | .1.3.6.1.4.1.10876.101.2.23.1.1.1.18 |
| fsMIStdOspfv3RestartInterval Configured OSPF hitless restart timeout interval. | column | seconds UpToRefreshInterval | .1.3.6.1.4.1.10876.101.2.23.1.1.1.19 |
| fsMIStdOspfv3RouterId A 32-bit integer uniquely identifying the
router in the Autonomous System.
To ensure uniqueness, this may
default to the value of one of the
router's IPv4 interfac… | column | OSPF-MIBRouterID | .1.3.6.1.4.1.10876.101.2.23.1.1.1.2 |
| fsMIStdOspfv3RestartAge Remaining time in current OSPF hitless restart
interval. | column | seconds UpToRefreshInterval | .1.3.6.1.4.1.10876.101.2.23.1.1.1.21 |
| fsMIStdOspfv3RestartExitReason Describes the outcome of the last attempt at a
hitless restart. If the value is 'none', no restart
has yet been attempted. If the value is 'inProgress',
a restart attempt is… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.23.1.1.1.22 |
| fsMIStdOspfv3Status This variable displays the status of the en-
try. The internal effect (row removal) is
implementation dependent. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.10876.101.2.23.1.1.1.23 |
| fsMIStdOspfv3AdminStat The administrative status of OSPFv3 in the
router. The value 'enabled' denotes that the
OSPFv3 Process is active on at least one inter-
face; 'disabled' disables … | column | OSPF-MIBStatus | .1.3.6.1.4.1.10876.101.2.23.1.1.1.3 |
| fsMIStdOspfv3VersionNumber The version number of OSPF for IPv6 is 3. | column | Enumeration | .1.3.6.1.4.1.10876.101.2.23.1.1.1.4 |
| fsMIStdOspfv3AreaBdrRtrStatus A flag to note whether this router is an area
border router. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.23.1.1.1.5 |
| fsMIStdOspfv3ASBdrRtrStatus A flag to note whether this router is config-
ured as an Autonomous System border router. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.23.1.1.1.6 |
| fsMIStdOspfv3AsScopeLsaCount The number of AS-Scope (e.g. AS-External) link-state
advertisements in the link-state database. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.10876.101.2.23.1.1.1.7 |
| fsMIStdOspfv3AsScopeLsaCksumSum The 32-bit unsigned sum of the LS checksums of
the AS-scoped link-state advertisements con-
tained in the link-state database. This sum
can be used to determine if there h… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.2.23.1.1.1.8 |
| fsMIStdOspfv3OriginateNewLsas The number of new link-state advertisements
that have been originated. This number is in-
cremented each time the router originates a new
LSA. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.2.23.1.1.1.9 |