This is the MIB Module for Cable Spectrum Group Management
for MCNS compliant Cable Modem Termination Systems (CMTS).
Copyright (C) 2001, 2008 by Motorola, Inc.
All rights reserved.
|
rdnCableSpectrumGroup1.3.6.1.4.1.4981.6.1.2 |
| docsIfUpChannelModulationProfile, docsIfUpChannelWidth, docsIfUpChannelFrequency, TenthdB | DOCS-IF-MIB |
| InterfaceIndex, ifIndex | IF-MIB |
| InetAddressIPv6, InetAddressIPv4 | INET-ADDRESS-MIB |
| rdnCableSpectrumObjects | RDN-CABLE-SPECTRUM-MIB |
| rdnCardIfPortNumber, rdnCardIfSlotNumber, rdnSlotNumber | RDN-CHASSIS-MIB |
| SnmpAdminString | SNMP-FRAMEWORK-MIB |
| IpAddress, Integer32, Counter32, Unsigned32, OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY | SNMPv2-SMI |
| MacAddress, TestAndIncr, TruthValue, TEXTUAL-CONVENTION, DateAndTime, RowStatus, DisplayString | SNMPv2-TC |
| Name | Base Type | Values/Constraints |
|---|---|---|
| sunday(1), monday(2), tuesday(3), wednesday(4), thursday(5), friday(6), saturday(7), everyday(8) | ||
| range: 2..600 | ||
| frequency(1), band(2), powerDefault(3), powerLevel(4), modulationProfile(5), channelWidth(6) | ||
![]() | .1.3.6.1.4.1.4981.6.1.2 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.1.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.1.1.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.1.1.10 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.1.1.11 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.1.1.12 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.1.1.13 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.1.1.14 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.1.1.15 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.1.1.16 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.1.1.17 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.1.1.18 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.1.1.19 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.1.1.2 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.1.1.20 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.1.1.21 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.1.1.22 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.1.1.23 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.1.1.24 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.1.1.25 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.1.1.26 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.1.1.3 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.1.1.4 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.1.1.5 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.1.1.6 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.1.1.7 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.1.1.8 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.1.1.9 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.1.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.1.1.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.1.1.2 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.1.1.3 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.1.1.4 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.2 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.2.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.2.1.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.2.1.2 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.3 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.3.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.3.1.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.3.1.1.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.3.1.1.2 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.3.1.1.3 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.3.1.1.4 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.3.1.1.5 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.3.1.1.6 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.3.1.1.7 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.3.2 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.3.2.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.3.2.1.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.4 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.5 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.5.0 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.6 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.6.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.7 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.7.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.7.1.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.7.1.2 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.7.1.3 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.7.1.4 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.7.1.5 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.7.1.6 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.7.1.7 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.7.1.8 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.8 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.8.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.8.1.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.8.1.10 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.8.1.11 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.8.1.12 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.8.1.2 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.8.1.3 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.8.1.4 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.8.1.5 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.8.1.6 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.8.1.7 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.8.1.8 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.8.1.9 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.9 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.9.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.10.9.1.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.11 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.11.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.11.1.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.11.1.2 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.12 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.13 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.13.0 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.14 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.14.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.14.2 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.14.3 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.14.4 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.14.5 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.14.6 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.14.7 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.15 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.15.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.15.2 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.15.2.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.15.2.1.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.15.2.1.2 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.15.2.1.3 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.15.2.1.4 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.15.2.1.5 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.15.2.1.7 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.15.2.1.8 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.15.2.1.9 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.16 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.16.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.16.1.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.16.1.1.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.16.1.1.2 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.16.1.1.3 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.16.1.1.4 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.16.1.1.5 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.16.1.1.6 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.16.1.1.7 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.16.1.1.8 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.2 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.2.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.2.1.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.2.1.2 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.2.1.3 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.2.1.4 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.2.1.5 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.2.1.6 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.2.1.7 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.2.1.8 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.2.1.9 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.3 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.3.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.3.1.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.3.1.10 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.3.1.2 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.3.1.3 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.3.1.4 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.3.1.5 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.3.1.6 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.3.1.7 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.3.1.8 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.3.1.9 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.4 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.4.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.4.1.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.4.1.2 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.4.1.3 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.5 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.5.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.5.1.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.5.1.2 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.5.1.3 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.5.1.4 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.5.1.5 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.5.1.6 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.5.1.7 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.6 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.6.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.6.1.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.6.1.2 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.6.1.3 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.6.1.4 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.6.1.5 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.7 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.7.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.7.1.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.7.1.2 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.7.1.3 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.7.1.4 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.9 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.9.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.9.1.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.9.1.2 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.9.1.3 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.9.1.4 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.9.1.5 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.9.1.6 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.9.1.7 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.9.1.8 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.9.2 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.9.2.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.9.2.1.1 | |
![]() | .1.3.6.1.4.1.4981.6.1.2.9.2.1.2 |
| Name | OID | Description |
|---|---|---|
| .1.3.6.1.4.1.4981.6.1.2.10.5.0.1 | An event to report SNR measurement failure the slot/port and specify the SNR measurement abort reason. | |
| .1.3.6.1.4.1.4981.6.1.2.10.5.0.2 | An event to report SNR measurement completion on the slot/port and indicate the test result is ready to be viewed. | |
| .1.3.6.1.4.1.4981.6.1.2.13.0.1 | The BSR Spectrum Management feature has initiated
an automatic Frequency change for purposes of
noise avoidance. Severity level = warning(5).
PARAMETERS:
ifIndex is the interface index of the upstream physical channel
that underwent an automatic frequency change.
rdnCardIfSlotNumber is the chassis slot number of the CMTS card
that is associated with the ifIndex parameter.
rdnCardIfPortNumber is the port number of the receiver
that is associated with the ifIndex parameter.
rdnSpectrumGroupName is the Spectrum Group name associated
with the upstream channel that underwent the frequency change.
rdnSpectrumAgilityOldFrequency is the old frequency to which
the upstream channel had been tuned, prior to the frequency change.
Presumably, this frequency had an inadequate signal quality,
which resulted in the automatic frequency change.
docsIfUpChannelFrequency is the new frequency to which
the upstream channel is tuned, following the frequency change.
docsIfUpChannelWidth is the channel width for the upstream
channel that underwent the frequency change.
docsIfUpChannelModulationProfile is the modulation profile
associated with the upstream channel that underwent the
frequency change. | |
| .1.3.6.1.4.1.4981.6.1.2.13.0.10 | The BSR Spectrum Management feature attempted to initiate
an automatic frequency hop action, for purposes of noise avoidance,
but the hop attempt failed. The frequency of the upstream channel
is unchanged. Severity level = error(4).
PARAMETERS:
ifIndex is the interface index of the upstream physical channel
that attempted an automatic frequency change.
rdnCardIfSlotNumber is the chassis slot number of the CMTS card
that is associated with the ifIndex parameter.
rdnCardIfPortNumber is the port number of the receiver
that is associated with the ifIndex parameter.
rdnSpectrumGroupName is the Spectrum Group name associated
with the upstream channel that attempted the frequency change.
rdnSpectrumAgilityOldFrequency is the frequency to which
the upstream channel was tuned, before the attempted
frequency change. Presumably, this frequency had an inadequate
signal quality, which resulted in the attempted frequency
change. The receiver will still be tuned to this frequency,
because of the hop failure.
docsIfUpChannelFrequency is the new frequency which
the failed hop action had attempted to set for the
upstream channel
docsIfUpChannelWidth is the channel width for the upstream
channel that attempted the frequency change.
docsIfUpChannelModulationProfile is the modulation profile
associated with the upstream channel that attempted the
frequency change.
rdnCableAgilityHopAbortReason describes the reason that
the frequency hop failed | |
| .1.3.6.1.4.1.4981.6.1.2.13.0.11 | The BSR Spectrum Management feature attempted
an automatic modulation profile hop, for purposes of
noise avoidance, but the hop failed. Severity level = error(4).
PARAMETERS:
ifIndex is the interface index of the upstream logical channel
that attempted an automatic modulation profile hop.
rdnCardIfSlotNumber is the chassis slot number of the CMTS card
that is associated with the ifIndex parameter.
rdnCardIfPortNumber is the port number of the receiver
that is associated with the ifIndex parameter.
rdnSpectrumGroupName is the Spectrum Group name associated
with the upstream channel that attempted the modulation profile hop.
rdnSpectrumAgilityOldModulationProfile is the modulation profile
the upstream channel (unchanged).
docsIfUpChannelModulationProfile is the new modulation profile
for the upstream channel, that the failed hop action had attempted
to set.
docsIfUpChannelFrequency is the frequency to which
the upstream channel is currently tuned.
docsIfUpChannelWidth is the channel width for the upstream
channel that attempted the modulation profile hop.
rdnCableAgilityHopAbortReason describes the reason that
the frequency hop failed | |
| .1.3.6.1.4.1.4981.6.1.2.13.0.12 | This trap reports an attempt by the operator to make a
configuration change that would have created a conflict
for a related spectrum group. Severity level = error(4).
In all such cases, the attempted configuration attempt
has been rejected, and the configuration is unchanged.
PARAMETERS:
rdnSpectrumGroupConflictType indicates the type of
conflict that occurred.
rdnSpectrumGroupConflictDescription is a string description to give
detailed information about the conflict.
rdnSpectrumGroupName is the Spectrum Group name involved
in the failed configuration attempt. | |
| .1.3.6.1.4.1.4981.6.1.2.13.0.2 | The BSR Spectrum Management feature has initiated
an automatic Frequency rollback, switching from the
spare spectrum, back to the original frequency, after
determining that signal-quality has been sufficiently
restored on the original frequency. Severity level = notice(6).
PARAMETERS:
ifIndex is the interface index of the upstream physical channel
that underwent an automatic frequency rollback.
rdnCardIfSlotNumber is the chassis slot number of the CMTS card
that is associated with the ifIndex parameter.
rdnCardIfPortNumber is the port number of the receiver
that is associated with the ifIndex parameter.
rdnSpectrumGroupName is the Spectrum Group name associated
with the upstream channel that underwent the frequency rollback.
rdnSpectrumAgilityOldFrequency is the spare frequency to which
the upstream channel had been tuned, prior to the frequency rollback.
docsIfUpChannelFrequency is the original frequency to which
the upstream channel is once again tuned, following a sufficient
improvement in the signal quality.
docsIfUpChannelWidth is the channel width for the upstream
channel that underwent the frequency rollback.
docsIfUpChannelModulationProfile is the modulation profile
associated with the upstream channel that underwent the
frequency rollback. | |
| .1.3.6.1.4.1.4981.6.1.2.13.0.3 | The BSR Spectrum Management feature has initiated
an automatic modulation profile hop, for purposes of
noise avoidance. Severity level = warning(5).
PARAMETERS:
ifIndex is the interface index of the upstream logical channel
that underwent an automatic modulation profile hop.
rdnCardIfSlotNumber is the chassis slot number of the CMTS card
that is associated with the ifIndex parameter.
rdnCardIfPortNumber is the port number of the receiver
that is associated with the ifIndex parameter.
rdnSpectrumGroupName is the Spectrum Group name associated
with the upstream channel that underwent the modulation profile hop.
rdnSpectrumAgilityOldModulationProfile is the modulation profile which
the upstream channel had been using, prior to the modulation profile hop.
docsIfUpChannelModulationProfile is the new modulation profile
now in use the upstream channel, following the automatic
modulation profile hop action.
docsIfUpChannelFrequency is the frequency to which
the upstream channel is currently tuned.
docsIfUpChannelWidth is the channel width for the upstream
channel that underwent the modulation profile hop. | |
| .1.3.6.1.4.1.4981.6.1.2.13.0.4 | The BSR Spectrum Management feature has initiated
an automatic modulation profile rollback, for purposes of
noise avoidance. Severity level = notice(6).
PARAMETERS:
ifIndex is the interface index of the upstream logical channel
that underwent an automatic modulation profile rollback.
rdnCardIfSlotNumber is the chassis slot number of the CMTS card
that is associated with the ifIndex parameter.
rdnCardIfPortNumber is the port number of the receiver
that is associated with the ifIndex parameter.
rdnSpectrumGroupName is the Spectrum Group name associated
with the upstream channel that underwent the modulation profile rollback.
rdnSpectrumAgilityOldModulationProfile is the modulation profile which
the upstream channel had been using, prior to the modulation profile rollback.
docsIfUpChannelModulationProfile is the new modulation profile
now in use the upstream channel, following the automatic
modulation profile rollback.
docsIfUpChannelFrequency is the frequency to which
the upstream channel is currently tuned.
docsIfUpChannelWidth is the channel width for the upstream
channel that underwent the modulation profile rollback. | |
| .1.3.6.1.4.1.4981.6.1.2.13.0.5 | The BSR Spectrum Management feature has detected
an upstream port is shutdown or removed from a
spectrum group. If the receiver is in any of the agile
states, then the receiver is configured to the configured
frequency. Severity level = warning(5).
PARAMETERS:
ifIndex is the interface index of the upstream
physical channel that is underwent the frequency
change.
rdnCardIfSlotNumber is the chassis slot number of the
CMTS card that is associated with the ifIndex
parameter.
rdnCardIfPortNumber is the port number of the receiver
that is associated with the ifIndex parameter.
rdnSpectrumGroupName is the Spectrum Group name
associated with the upstream channel that underwent
the frequency change.
rdnSpectrumAgilityFrequency is the old frequency to
which the upstream channel had been tuned to in agile
state.
docsIfUpChannelFrequency is the configured frequency to which
the upstream channel is tuned, following the frequency
change.
docsIfUpChannelWidth is the channel width for the
upstream channel that underwent the frequency change.
docsIfUpChannelModulationProfile is the modulation
profile associated with the upstream channel that
underwent the frequency change. | |
| .1.3.6.1.4.1.4981.6.1.2.13.0.6 | The BSR Spectrum Management feature has detected
an upstream port is shutdown or removed from a
spectrum group. If the receiver is in any of the agile
states, then the receiver is configured to the configured
modulation profile. Severity level = warning(5).
PARAMETERS:
ifIndex is the interface index of the upstream
logical channel that underwent a modulation profile
change.
rdnCardIfSlotNumber is the chassis slot number of the
CMTS card that is associated with the ifIndex
parameter.
rdnCardIfPortNumber is the port number of the receiver
that is associated with the ifIndex parameter.
rdnSpectrumGroupName is the Spectrum Group name
associated with the upstream channel that underwent
the modulation profile hop.
rdnSpectrumAgilityModulationProfile is the
modulation profile which the upstream channel had been
using in agile state.
docsIfUpChannelModulationProfile is the new modulation
profile now in use the upstream channel, following the
modulation profile changed.
docsIfUpChannelFrequency is the frequency to
which the upstream channel is currently tuned.
docsIfUpChannelWidth is the channel width for the
upstream channel that underwent the modulation
profile change. | |
| .1.3.6.1.4.1.4981.6.1.2.13.0.7 | The BSR Spectrum Management feature has detected
an upstream channel quality state transition
to an impaired state, due to noise. Severity level = error(4).
The channel will continue to operate in the impaired state,
though in possibly degraded fashion, until such time as
the BSR might be able to undertake a corrective
frequency/modulation profile agility hop action, if such a
hop action is configured.
PARAMETERS:
ifIndex is the interface index of the upstream physical channel
that is impaired.
rdnCardIfSlotNumber is the chassis slot number of the CMTS card
that is associated with the ifIndex parameter.
rdnCardIfPortNumber is the port number of the receiver
that is associated with the ifIndex parameter.
rdnSpectrumGroupName is the Spectrum Group name associated
with the upstream channel that has become impaired.
docsIfUpChannelFrequency is the frequency to which
the impaired upstream channel is tuned.
docsIfUpChannelWidth is the channel width for the upstream
channel that has become impaired.
docsIfUpChannelModulationProfile is the modulation profile
associated with the upstream channel that has become
impaired. | |
| .1.3.6.1.4.1.4981.6.1.2.13.0.8 | The BSR Spectrum Management feature has detected
an upstream channel quality state transition
from an impaired state, to normal operating state.
Severity level = notice(6).
PARAMETERS:
ifIndex is the interface index of the upstream physical channel
that is no longer impaired.
rdnCardIfSlotNumber is the chassis slot number of the CMTS card
that is associated with the ifIndex parameter.
rdnCardIfPortNumber is the port number of the receiver
that is associated with the ifIndex parameter.
rdnSpectrumGroupName is the Spectrum Group name associated
with the upstream channel.
docsIfUpChannelFrequency is the frequency for the upstream
channel.
docsIfUpChannelWidth is the channel width for the upstream
channel.
docsIfUpChannelModulationProfile is the modulation profile
associated with the upstream channel. | |
| .1.3.6.1.4.1.4981.6.1.2.13.0.9 | The BSR Spectrum Management feature does not know an
upstream channel quality state either Normal or Impaired. Once
the state is known, it will transition out of Pending state.
Severity level = notice(6).
PARAMETERS:
ifIndex is the interface index of the upstream
physical channel that is in pending state.
rdnCardIfSlotNumber is the chassis slot number of the
CMTS card that is associated with the ifIndex
parameter.
rdnCardIfPortNumber is the port number of the receiver
that is associated with the ifIndex parameter.
rdnSpectrumGroupName is the Spectrum Group name
associated with the upstream channel.
docsIfUpChannelFrequency is the frequency for the
upstream channel.
docsIfUpChannelWidth is the channel width for the
upstream channel.
docsIfUpChannelModulationProfile is the modulation
profile associated with the upstream channel. |