RDN-CABLE-SPECTRUM-GROUP-MIB Table View

This table keeps the records of spectrum groups. These groups
can be configured and activated by the spectrum manager and used
by the CMTS upstream port for frequency hopping. 
          
In this table, certain objects will apply DRX and CMTS 2x8 cards,
and others will apply to CMTS 1x8 and 1x4 cards, as indicated in
the individual DESCRIPTION statements.
          
For DRX and CMTS 2x8 cards, all member channels of the same spectrum group 
must reside on the same, physical 2x8 card in the chassis.
          
As the normal practice, it is recommended that all receivers on the 
same CMTS card should be physically cabled together.  At a minimum, 
all receivers in spectrum group should be cabled together.
          
If receivers are in different spectrum groups, it is expected that
they can independently reuse the same spectrum, so must *not* be 
physically cabled together.
          
For CMTS 1x8 and 1x4 cards, it is not forbidden to add receivers
from different cards to the same spectrum group, but this is not
recommended.

rdnSpectrumGroupEntry row .1.3.6.1.4.1.4981.6.1.2.1.1

List of attributes for an entry in the rdnSpectrumGroupEntry.
An entry in this table exists for each spectrum group that
has been configured by the spectrum manager.

Indexes

rdnSpectrumGroupName

Column	Syntax	OID
rdnSpectrumGroupName The text name (index) of the spectrum group.	OctetString Constraints: range: 1-20	.1.3.6.1.4.1.4981.6.1.2.1.1.1
rdnSpectrumGroupId The number index for the spectrum group.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4981.6.1.2.1.1.2
rdnSpectrumGroupHopPeriod The rate at which the frequency hop takes place. This would be useful in preventing excessive hops. Unit is in second. This parameter applies only to CMTS 1x8 and 1x4 cards.	Unsigned32r/w Constraints: range: 30-3600	.1.3.6.1.4.1.4981.6.1.2.1.1.3
rdnSpectrumGroupHopThresholdFlap The CM flap rate percentage threshold that controls the hopping frequency. The hopping only happens when the percentage of flap CMs is higher than this threshold. Value 0 means the flap threshold hop disabled. …	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.4981.6.1.2.1.1.4
rdnSpectrumGroupHopThresholdError The FEC error rate percentage threshold that controls the hopping frequency. The hopping only happens when the error rate percentage is higher than this threshold. The unit is 1/1000. This parameter appl…	Unsigned32r/w Constraints: range: 1-1000	.1.3.6.1.4.1.4981.6.1.2.1.1.5
rdnSpectrumGroupHopRollbackEnable This field controls the spectrum rollback option when the original channel quality recovers. The rollback is allowed when this field is enabled. The rollback is not allowed when this field is set to disable. …	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4981.6.1.2.1.1.6
rdnSpectrumDataCollectResolution The spectrum data collection resolution, in Hz. This parameter applies to all CMTS card types.	Unsigned32r/w Constraints: range: 200000-400000	.1.3.6.1.4.1.4981.6.1.2.1.1.7
rdnSpectrumDataCollectInterval The spectrum data collection interval, in second. Minimum value 60 seconds. Value 0 means the collection is disabled. This parameter applies to all CMTS card types.	Unsigned32r/w Constraints: range: 0-0 range: 60-65535	.1.3.6.1.4.1.4981.6.1.2.1.1.8
rdnSpectrumGroupGuardBand The minimum spectrum separation between upstream channels in the same spectrum group, in Hz. This parameter applies to CMTS 1x8 and 1x4 cards.	Unsigned32r/w Constraints: range: 0-60000000	.1.3.6.1.4.1.4981.6.1.2.1.1.9
rdnSpectrumGroupRowStatus Controls and reflects the status of rows in this table. This field is used to control the addition and deletion of a spectrum group.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4981.6.1.2.1.1.10
rdnSpectrumOfflineModemCount Number of offline modems for this spectrum group	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4981.6.1.2.1.1.11
rdnSpectrumOnlineModemCount Number of online modems for this spectrum group	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4981.6.1.2.1.1.12
rdnSpectrumActiveModemCount Number of active modems for this spectrum group	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4981.6.1.2.1.1.13
rdnSpectrumRegisteredModemCount Number of registered modems for this spectrum group	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4981.6.1.2.1.1.14
rdnSpectrumProvisionedModemCount Number of provisioned modems for this spectrum group	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4981.6.1.2.1.1.15
rdnSpectrumUnregisteredModemCount Number of Unregistered modems for this spectrum group	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4981.6.1.2.1.1.16
rdnSpectrumGroupUnerroreds Codewords received on this spectrum group without error. This includes all codewords, whether or not they were part of frames destined for this device.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4981.6.1.2.1.1.17
rdnSpectrumGroupCorrecteds Codewords received on this spectrum group with correctable errors. This includes all codewords, whether or not they were part of frames destined for this device.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4981.6.1.2.1.1.18
rdnSpectrumGroupUncorrectables Codewords received on this spectrum group with uncorrectable errors. This includes all codewords, whether or not they were part of frames destined for this device.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4981.6.1.2.1.1.19
rdnSpectrumGroupStaticLoadBalEnable This field controls the Static Load Balancing feature. This parameter applies to all CMTS card types.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4981.6.1.2.1.1.20
rdnSpectrumGroupLoadBalance Setting this object to TRUE performs a Static Load Balancing for the spectrum group. Reading this object always returns FALSE.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4981.6.1.2.1.1.21
rdnSpectrumGroupActiveChannelSamplingPeriod The signal quality of the active channel is periodically measured for SNR. This object is the time between two consecutive signal quality measurements of the active channel. A value of zero means that …	Unsigned32r/w Constraints: range: 0-15	.1.3.6.1.4.1.4981.6.1.2.1.1.22
rdnSpectrumGroupHopRollbackChannelSamplingPeriod When a primary channel is swapped with the spare channel, if the rollback is configured, the primary channel is periodically measured for signal quality in the background using the 9th receiver. This object is the tim…	Unsigned32r/w Constraints: range: 10-300	.1.3.6.1.4.1.4981.6.1.2.1.1.23
rdnSpectrumGroupHopSpareChannelSamplingPeriod If a primary channel could not be swapped for noise avoidance with a spare channel, due to poor signal quality of the spare channels, the spare channels are periodically assessed on the 9th receiver. This object is t…	Unsigned32r/w Constraints: range: 10-600	.1.3.6.1.4.1.4981.6.1.2.1.1.24
rdnSpectrumGroupSnrHysteresisValue SNR hysteresis (a default hysteresis of 2dB) is used to determine the SNR threshold for the downward transition from upper modulation type to a lower modulation type. The hysteresis can be configured to a resolution …	Unsigned32r/w Constraints: range: 2-3	.1.3.6.1.4.1.4981.6.1.2.1.1.25
rdnSpectrumGroupReferenceCMExclusion This parameter defines the number of low SNR modem(s), on each upstream in the spectrum-group, not allowed to be used for channel assessment. This parameter has no effect when the number of registered modems on a spec…	Unsigned32r/w Constraints: range: 0-45	.1.3.6.1.4.1.4981.6.1.2.1.1.26

This table keeps the records of spectrum band scheduled for
a specific spectrum group. 
          
This table applies to CMTS 1x8 and 1x4, only.

rdnSpectrumBandSchedEntry row .1.3.6.1.4.1.4981.6.1.2.2.1

List of attributes for an entry in the rdnSpectrumBandScheEntry.

Indexes

rdnSpectrumGroupId rdnSpectrumBandSchedId rdnSpectrumBandSchedAction

Column	Syntax	OID
rdnSpectrumBandSchedId The identifier for the band schedule, it is the second index for the spectrum band schedule table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4981.6.1.2.2.1.1
rdnSpectrumBandSchedAction The action on the specified frequency band. The third index of this band schedule table. Band add (1), band delete (2).	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4981.6.1.2.2.1.2
rdnSpectrumBandFreqLow The spectrum band low frequency in Hz. The lower limit is 5 MHz for North American standard, is 5 MHz for European standard.	Unsigned32r/w Constraints: range: 5000000-65000000	.1.3.6.1.4.1.4981.6.1.2.2.1.3
rdnSpectrumBandFreqHigh The spectrum band high frequency in Hz. This value must be at least 200000 Hz higher than the band low frequency. The upper limit is 42 MHz for North American standard, is 65 MHz for European standard.	Unsigned32r/w Constraints: range: 5000000-65000000	.1.3.6.1.4.1.4981.6.1.2.2.1.4
rdnSpectrumBandSchedWeekDay The week day of the band schedule.	SchedulingWeekDayr/w Type Values: 1 sunday 2 monday 3 tuesday 4 wednesday 5 thursday 6 friday 7 saturday 8 everyday	.1.3.6.1.4.1.4981.6.1.2.2.1.5
rdnSpectrumBandSchedHour The hour of the band schedule (in 24-hour format).	Unsigned32r/w Constraints: range: 0-23	.1.3.6.1.4.1.4981.6.1.2.2.1.6
rdnSpectrumBandSchedMinute The minute of the band schedule.	Unsigned32r/w Constraints: range: 0-59	.1.3.6.1.4.1.4981.6.1.2.2.1.7
rdnSpectrumBandSchedSecond The second of the band schedule.	Unsigned32r/w Constraints: range: 0-59	.1.3.6.1.4.1.4981.6.1.2.2.1.8
rdnSpectrumBandSchedRowStatus The row status that controls the addition and deletion of the band schedule entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4981.6.1.2.2.1.9

This table keeps the records of spectrum hopping rules for
a specific spectrum group. 
          
Certain objects in this table apply to all CMTS card types,
while others might apply to DRX and CMTS 2x8, or only to
CMTS 1x8 and 1x4, as indicated by the individual 
DESCRIPTION statements.

rdnSpectrumHopEntry row .1.3.6.1.4.1.4981.6.1.2.3.1

List of attributes for an entry in the rdnSpectrumHopTable.
This table is index by a rdnSpectrumGroupId and a
rdnSpectrumHopId. Each row within this table reflects one Hop
action for a spectrum group. The rdnSelection…

Indexes

rdnSpectrumGroupId rdnSpectrumHopId

Column	Syntax	OID
rdnSpectrumHopId The index for the spectrum hop rule table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4981.6.1.2.3.1.1
rdnSpectrumHopSelection Identifies the selection of the action for this spectrum hop rule. If the value is 'frequency(1)' then the only applicable objects are rdnSpectrumHopPriority and rdnSpectrumHopFrequency. If the value is 'band(2)' then …	SpectrumHopSelectionsr/w Type Values: 1 frequency 2 band 3 powerDefault 4 powerLevel 5 modulationProfile 6 channelWidth	.1.3.6.1.4.1.4981.6.1.2.3.1.2
rdnSpectrumHopPriority Identifies the priority for this spectrum hop policy. The default value is 128. The range is 1 to 255. This parameter applies to all CMTS card types.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.4981.6.1.2.3.1.3
rdnSpectrumHopFrequency Identifies the center frequency for the spectrum hop schedule entry. The hop can be specified with a discrete center frequency or with a band but not both in the same group. This object is not applicabl…	Unsigned32r/w Constraints: range: 0-0 range: 5000000-85000000	.1.3.6.1.4.1.4981.6.1.2.3.1.4
rdnSpectrumHopBandLow The start frequency for the individual spectrum hop. This object is not applicable to a hop action when a value of 0 is reported by this object. This parameter applies to all CMTS card typ…	Unsigned32r/w Constraints: range: 0-0 range: 5000000-85000000	.1.3.6.1.4.1.4981.6.1.2.3.1.5
rdnSpectrumHopBandHigh The stop frequency for the individual spectrum hop. This value must be at least 200000 Hz higher than the start frequency. This object is not applicable to a hop action when a value of 0 is reported by t…	Unsigned32r/w Constraints: range: 0-0 range: 5000000-85000000	.1.3.6.1.4.1.4981.6.1.2.3.1.6
rdnSpectrumHopChannelWidth Identifies the channel width change for this individual spectrum hop. The valid band width is 200000 Hz, 400000 Hz, 800000 Hz, 1600000 Hz, 3200000 Hz. This object is not applicable to a hop action when a…	Enumerationr/w Enumerated Values: 0 notApplicable 200000 channelWidth1 400000 channelWidth2 800000 channelWidth3 1600000 channelWidth4 3200000 channelWidth5	.1.3.6.1.4.1.4981.6.1.2.3.1.7
rdnSpectrumHopPowerLevel Identifies a power level change for this individual spectrum hop. Different channel width has different power level range, < -160, 140 > for 200 KHz, < -130, 170 > for 400 KHz, < -100, 200 > for 800 KHz, < -70, 230 > …	Integer32r/w Constraints: range: -160-260	.1.3.6.1.4.1.4981.6.1.2.3.1.8
rdnSpectrumHopModulationProfile Identifies the modulation profile change for this individual spectrum hop. This object is not applicable to a hop action when a value of 0 is reported by this object. This parameter appli…	Integer32r/w Constraints: range: 0-16	.1.3.6.1.4.1.4981.6.1.2.3.1.9
rdnSpectrumHopRowStatus The row status that controls the add and deletion of the spectrum hop rule entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4981.6.1.2.3.1.10

This table keeps the records of the associations between 
upstream ports and spectrum groups.
          
For CMTS 2x8 cards, all members of the same spectrum group 
must reside on the same physical card.
          
Channels on CMTS 1x8 and 1x4 cards can be mixed in the same
spectrum group, but they may NOT be mixed in the same spectrum
group with CMTS 2x8 channels.
          
As the normal practice, it is recommended that all receivers on the 
same CMTS card should be physically cabled together.  At a minimum, 
all receivers in spectrum group should be cabled together.
          
If channels are in different spectrum groups, it is expected that
they can independently reuse the same spectrum, so must *not* be 
physically cabled together.
          
For CMTS 1x8 and 1x4 cards, it is not forbidden to add receivers
from different cards to the same spectrum group, but this is not
recommended.

rdnSpectrumMemberChannelEntry row .1.3.6.1.4.1.4981.6.1.2.4.1

List of attributes for an entry in the
RdnSpectrumMemberChannelEntry. It is indexed by ifIndex values
that are associated with upstream ports (ifType = 129)

Indexes

IF-MIBifIndex

Column	Syntax	OID
rdnUsChannelId The upstream channel ID.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.4981.6.1.2.4.1.1
rdnMemChSpectrumGroupId The ID for the spectrum group that is associated with this upstream port. Value 0 means no association.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.4981.6.1.2.4.1.2
rdnMemChSpectrumGroupName The text name of the associated spectrum group.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4981.6.1.2.4.1.3

This table stores the noise and error rate for the different 
frequency bands.  This table applies to all CMTS card types.

rdnSpectrumDataEntry row .1.3.6.1.4.1.4981.6.1.2.5.1

List of attributes for an entry in the rdnSpectrumDataEntry.
The index for this table is an ifIndex that is associated
with an upstream port (ifType = 129)

Indexes

IF-MIBifIndex

Column	Syntax	OID
rdnSpectrumDataIndex The internal index of the spectrum data	Integer32 Constraints: range: 1-200	.1.3.6.1.4.1.4981.6.1.2.5.1.1
rdnSpecDataUsChannelId The upstream channel ID.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.4981.6.1.2.5.1.2
rdnSpectrumDataStartFrequency Start Frequency of the spectrum data collection	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4981.6.1.2.5.1.3
rdnSpectrumDataResolution Resolution of the spectrum data collection in Hz	Integer32 Constraints: range: 200000-32000000	.1.3.6.1.4.1.4981.6.1.2.5.1.4
rdnSpectrumDataSamples Number of data samples used in this spectrum data collection period	Integer32 Constraints: range: 1-300	.1.3.6.1.4.1.4981.6.1.2.5.1.5
rdnSpectrumDataLastUpdate Date and time when this collection data was last updated	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.4981.6.1.2.5.1.6
rdnSpectrumDataArray The data array that holds the spectrum data.	SpecDataArray Type Constraints: range: 2..600	.1.3.6.1.4.1.4981.6.1.2.5.1.7

This table stores the spectrum quality information.
          
This table applies to all CMTS card types.

rdnSpectrumQualityEntry row .1.3.6.1.4.1.4981.6.1.2.6.1

List of attributes for an entry in the rdnSpectrumDataEntry.

Indexes

IF-MIBifIndex

Column	Syntax	OID
rdnSpecQualityUsChId Identifies the upstream channel id for which the spectrum signal quality is gathered.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.4981.6.1.2.6.1.1
rdnSpectrumQualityDataLastUpdate Date and time when this data was last updated	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.4981.6.1.2.6.1.2
rdnSpectrumDataInBandPower The in-band power for this frequency band. The unit is the tenths of dBmV.	Integer32 Constraints: range: -600-363	.1.3.6.1.4.1.4981.6.1.2.6.1.3
rdnSpectrumTotCodeWord The total number of code words transfer through this interface	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4981.6.1.2.6.1.4
rdnSpectrumErrorCodeWord The uncorrectable error code words received through this interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4981.6.1.2.6.1.5

This table keeps the records of spectrum usage.
          
This table applies to all CMTS card types.

rdnSpectrumMapEntry row .1.3.6.1.4.1.4981.6.1.2.7.1

List of attributes for an entry in the rdnSpectrumMapEntry.

Indexes

rdnSpectrumGroupId rdnSpectrumMapIndex

Column	Syntax	OID
rdnSpectrumMapIndex Identifies an entry in the spectrum map table	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4981.6.1.2.7.1.1
rdnSpectrumMapStartFrequency The start frequency of the current spectrum band.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4981.6.1.2.7.1.2
rdnSpectrumMapStopFrequency The stop frequency of the current spectrum band.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4981.6.1.2.7.1.3
rdnSpectrumMapStatus The spectrum band status: invalid(0) - is not used, and would indicate a software error. available(1) - spectrum that is available for use in an RSSI-based spectrum group. …	Enumeration Enumerated Values: 0 invalid 1 available 2 occupied 3 adminDown 4 scheduled 5 reserved 6 agile 7 hopAvailable	.1.3.6.1.4.1.4981.6.1.2.7.1.4

This table provides the statistical data collected
as a result of a FFT measurement, initiated by
setting rdnCableFftConfigSpinLock.
          
This table applies to CMTS 2x8 cards, and to BSR2000.

rdnCableFftResultEntry row .1.3.6.1.4.1.4981.6.1.2.9.2.1

List of results from a FFT measurement.

Indexes

rdnCableFftResultSampleFreq

Column	Syntax	OID
rdnCableFftResultSampleFreq Sample frequency used for the indicated power value.	hertzSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4981.6.1.2.9.2.1.1
rdnCableFftResultPowerValue FFT power value for this sample frequency.	dBThousandthdB	.1.3.6.1.4.1.4981.6.1.2.9.2.1.2

This table allows configuration for SNR tests. These tests
are performed on the ninth receiver for diagnostic
purposes.
          
This table applies to CMTS 2x8 cards, and to BSR2000.

rdnCableSnrConfigEntry row .1.3.6.1.4.1.4981.6.1.2.10.1.1

List of attributes for an entry in the
rdnCableSnrConfigEntry. An entry in this table exists
for each slot/port of 2x8 CMTS.

Indexes

IF-MIBifIndex

Column	Syntax	OID
rdnCableSnrConfigIdleSpectrumStart The start frequency of the idle spectrum from 5 MHZ to 42 MHZ for North American standard, 65 MHz for European standard and 10 MHz to 55 MHz for Japanese standard. If value 0 is retrieved for GET operation, it indicates…	Integer32r/w Constraints: range: 0-0 range: 5000000-65000000	.1.3.6.1.4.1.4981.6.1.2.10.1.1.1
rdnCableSnrConfigIdleSpectrumStop The end frequency in idle spectrum. The upper limit is 42 MHz for North American standard, 65 MHz for European standard and 10 MHz to 55 MHz for Japanese standard. If value 0 is retrieved for GET operation, it indicates…	Integer32r/w Constraints: range: 0-0 range: 5000000-65000000	.1.3.6.1.4.1.4981.6.1.2.10.1.1.2
rdnCableSnrConfigChannelWidth The spectrum channel width that the SNR tests will be evaluated. If value 0 is retrieved for GET operation, it indicates this parameter has never been set. Value 0 is not allowed for SET operation.	Enumerationr/w Enumerated Values: 0 channelWidthNotConfiged 400000 channelWidth2 800000 channelWidth3 1600000 channelWidth4 3200000 channelWidth5 6400000 channelWidth6	.1.3.6.1.4.1.4981.6.1.2.10.1.1.3
rdnCableSnrConfigEqualization Indicates whether equalization will be used for this SNR test. If this object has not be set, default value on will be displayed.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.4981.6.1.2.10.1.1.4

This table allows activation of SNR test. These tests are
performed on the ninth receiver of 2x8 CMTS for diagnostic
purposes.
          
This table applies to CMTS 2x8 cards, and to BSR2000.

rdnCableSnrStartEntry row .1.3.6.1.4.1.4981.6.1.2.10.2.1

List of attributes for an entry in the rdnCableSnrStartEntry.
An entry in this table exists for each sport of each 2x8 CMTS blade.

Indexes

IF-MIBifIndex

Column	Syntax	OID
rdnCableSnrStart Setting this object to true(1) causes SNR measurements. Reading the object with value true(1) indicates test in progress, and false(2) indicates no test in progress.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4981.6.1.2.10.2.1.1
rdnCableSnrStartCmMac MAC address of the reference modem to be used for this SNR test. If left default, then a CM will be selected from a pool of registered CMs on this ifIndex.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4981.6.1.2.10.2.1.2

This table provides the SNR data directly from the CMTS
card. CMTS card only keeps the latest results from an SNR
measurement.
          
This table applies to CMTS 2x8 cards, and to BSR2000.

rdnCableSnrResultEntry row .1.3.6.1.4.1.4981.6.1.2.10.3.1.1

List of results from a SNR measurement.

Indexes

IF-MIBifIndex rdnCableSnrResultIndex

Column	Syntax	OID
rdnCableSnrResultIndex A sequential index of 1 - n, and corresponding essentially to a display line number, as it would appear in the CLI.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4981.6.1.2.10.3.1.1.1
rdnCableSnrResultLastTime The date and time of the last SNR measurement.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.4981.6.1.2.10.3.1.1.2
rdnCableSnrResultCenterFreq Center frequency used for the indicated SNR value.	hertzInteger32 Constraints: range: 5000000-65000000	.1.3.6.1.4.1.4981.6.1.2.10.3.1.1.3
rdnCableSnrResultModulationProfile Modulation profile used for this SNR test result.	Integer32 Constraints: range: 1-600	.1.3.6.1.4.1.4981.6.1.2.10.3.1.1.4
rdnCableSnrResultModulationType Modulation type used for this SNR test result.	Enumeration Enumerated Values: 1 qpsk 2 qam16 3 qam8 4 qam32 5 qam64 6 qam128 7 qam256	.1.3.6.1.4.1.4981.6.1.2.10.3.1.1.5
rdnCableSnrResultEqualization Indicates whether equalization used for this SNR test.	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.4981.6.1.2.10.3.1.1.6
rdnCableSnrResultSnrValue SNR value for the indicated rdnCableSnrResultIndex.	dBDOCS-IF-MIBTenthdB	.1.3.6.1.4.1.4981.6.1.2.10.3.1.1.7

This table provides the list of cable modem mac addresses
that were selected / specified for the SNR test.

rdnCableSnrResultModemEntry row .1.3.6.1.4.1.4981.6.1.2.10.3.2.1

List of modem mac addresses used for SNR test.

Indexes

IF-MIBifIndex

Column	Syntax	OID
rdnCableSnrResultSelectedCmMac MAC address of the reference modem that was selected for this SNR test.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4981.6.1.2.10.3.2.1.1

This table allows configuration of automatically
repeated SNR tests, using a specified loop count
and a specified center frequency. 
These tests are performed on the ninth receiver for 
diagnostic purposes.
          
This table applies to CMTS 2x8 cards, and to BSR2000.

rdnCableSnrLoopTestEntry row .1.3.6.1.4.1.4981.6.1.2.10.7.1

List of attributes for an entry in the
rdnCableSnrLoopTestEntry. An entry in this table exists
for each slot/port of 2x8 CMTS.

Indexes

IF-MIBifIndex

Column	Syntax	OID
rdnCableSnrLoopTestLoopCount Number of times to repeat SNR measurements, using a configuration as specified by the rdnCableSnrLoopTestTable. A value of 0 is read-only, and means that the loop test is not configured	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.4981.6.1.2.10.7.1.1
rdnCableSnrLoopTestCenterFrequency The center frequency from 5 MHZ to 42 MHZ for North American standard, or 65 MHz for European standard. If value 0 is retrieved for GET operation, it indicates this parameter has never been set. Value 0 i…	hertzInteger32r/w Constraints: range: 0-0 range: 5000000-65000000	.1.3.6.1.4.1.4981.6.1.2.10.7.1.2
rdnCableSnrLoopTestChannelWidth The spectrum channel width that the SNR tests will be evaluated. If value 0 is retrieved for GET operation, it indicates this parameter has never been set. Value 0 is not allowed for SET operation.	Enumerationr/w Enumerated Values: 0 channelWidthNotConfiged 400000 channelWidth2 800000 channelWidth3 1600000 channelWidth4 3200000 channelWidth5 6400000 channelWidth6	.1.3.6.1.4.1.4981.6.1.2.10.7.1.3
rdnCableSnrLoopTestCmMac MAC address of the reference modem to be used for this SNR loop test. If left to default, then a CM will be selected from a pool of registered CMs on this ifIndex.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4981.6.1.2.10.7.1.4
rdnCableSnrLoopTestIngressCancellation Indicates whether ingress cancellation will be used for this SNR test.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.4981.6.1.2.10.7.1.5
rdnCableSnrLoopTestEqualization Indicates whether equalization will be used for this SNR test.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.4981.6.1.2.10.7.1.6
rdnCableSnrLoopTestDataPattern Data pattern to use for the SNR loop measurements.	Enumerationr/w Enumerated Values: 1 ranging	.1.3.6.1.4.1.4981.6.1.2.10.7.1.7
rdnCableSnrLoopStart Setting this object to true(1) causes repeated SNR measurements, with a loop count as indicated by rdnCableSnrLoopTestLoopCount, and using a configuration as specified by the other row members of rdnCableSnrLoopTestTabl…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4981.6.1.2.10.7.1.8

This table provides the SNR loop test results,
for a test previously initiated through the 
rdnCableSnrLoopTestTable.   Results are reported 
directly from the CMTS card(s).
          
This table applies to CMTS 2x8 cards, and to BSR2000.

rdnCableSnrLoopResultEntry row .1.3.6.1.4.1.4981.6.1.2.10.8.1

List of results from SNR loop test measurements.

Indexes

IF-MIBifIndex

Column	Syntax	OID
rdnCableSnrLoopResultLoopCount Number of times that SNR looping test repeated measurements.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.4981.6.1.2.10.8.1.1
rdnCableSnrLoopResultCenterFreq Center frequency associated with the max/min/average SNR values.	hertzInteger32 Constraints: range: 5000000-65000000	.1.3.6.1.4.1.4981.6.1.2.10.8.1.2
rdnCableSnrLoopResultChannelWidth The spectrum channel width associated with the SNR max/min/average values.	Enumeration Enumerated Values: 0 channelWidthNotConfiged 400000 channelWidth2 800000 channelWidth3 1600000 channelWidth4 3200000 channelWidth5 6400000 channelWidth6	.1.3.6.1.4.1.4981.6.1.2.10.8.1.3
rdnCableSnrLoopResultModulationProfile Modulation profile associated with the SNR max/min/average values.	Integer32 Constraints: range: 1-600	.1.3.6.1.4.1.4981.6.1.2.10.8.1.4
rdnCableSnrLoopResultCmMac MAC address of the reference modem that was selected for this SNR loop test.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4981.6.1.2.10.8.1.5
rdnCableSnrLoopResultIngressCancellation Indicates whether ingress cancellation used for this SNR loop test.	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.4981.6.1.2.10.8.1.6
rdnCableSnrLoopResultEqualization Indicates whether equalization was used for this SNR loop test.	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.4981.6.1.2.10.8.1.7
rdnCableSnrLoopResultDataPattern Data pattern that was used for the SNR loop measurements.	Enumeration Enumerated Values: 1 ranging	.1.3.6.1.4.1.4981.6.1.2.10.8.1.8
rdnCableSnrLoopResultMaxSnrValue Maximum SNR value for this loop test	dBDOCS-IF-MIBTenthdB	.1.3.6.1.4.1.4981.6.1.2.10.8.1.9
rdnCableSnrLoopResultMinSnrValue Minimum SNR value for this loop test	dBDOCS-IF-MIBTenthdB	.1.3.6.1.4.1.4981.6.1.2.10.8.1.10
rdnCableSnrLoopResultAvSnrValue Average SNR value for this loop test	dBDOCS-IF-MIBTenthdB	.1.3.6.1.4.1.4981.6.1.2.10.8.1.11
rdnCableSnrLoopResultLastTime The date and time when last SNR loop test began.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.4981.6.1.2.10.8.1.12

This table allows configuration of the modulation profile 
for SNR and LOOP tests.
          
This table applies to CMTS 2x8 cards, and to BSR2000.

rdnCableSnrModulationProfileEntry row .1.3.6.1.4.1.4981.6.1.2.10.9.1

List of modulation profiles for the CMTS cards.
The table is indexed by slotNo (0 to 15).

Indexes

RDN-CHASSIS-MIBrdnSlotNumber

Column	Syntax	OID
rdnCableSnrModulationProfile The modulation profile used for any SNR / LOOP test on this card. If this object has not be set, default value 1 will be displayed.	Integer32r/w Constraints: range: 1-600	.1.3.6.1.4.1.4981.6.1.2.10.9.1.1

This table is an expansion table for the rdnSpectrumGroupTable,
and defines the SNR thresholds for each possible modulation type.
          
This table applies to CMTS 2x8 cards.

rdnSnrThresholdEntry row .1.3.6.1.4.1.4981.6.1.2.11.1

A row in the rdnSnrThresholdTable.
This is an expansion table for the rdnSpectrumGroupTable

Indexes

rdnSpectrumGroupName rdnSnrThresholdModulationType

Column	Syntax	OID
rdnSnrThresholdModulationType Modulation type for which this entry in the rdnSnrThresholdTable is setting a threshold value	Enumeration Enumerated Values: 1 qpsk 2 qam16 3 qam8 4 qam32 5 qam64 6 qam128 7 qam256	.1.3.6.1.4.1.4981.6.1.2.11.1.1
rdnSnrThresholdValue The SNR threshold is used to determine if a channel is capable of operating error free in the modulation mode that is specified for data IUC in the configured modulation profile for the upstream receiver. …	dBUnsigned32r/w Constraints: range: 12-37	.1.3.6.1.4.1.4981.6.1.2.11.1.2

Show list of low SNR modems(s) not allowed to be used for 
channel assessment

rdnModemExclusionEntry row .1.3.6.1.4.1.4981.6.1.2.15.2.1

List of attributes for an entry in the rdnModemExclusionEntry.
This table has 3 index values:

1) Spectrum group id.

2) ifIndex is the interface index of the upstream physical channel
…

Indexes

rdnSpectrumGroupId IF-MIBifIndex rdnModemExclusionEntryIndex

Column	Syntax	OID
rdnModemExclusionEntryIndex A sequential index of 1 - n, and corresponding essentially to a display line number, as it would appear in the CLI.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4981.6.1.2.15.2.1.1
rdnModemExclusionSpectrumGroupName The text name of the spectrum group, associated with this excluded modem	OctetString Constraints: range: 1-20	.1.3.6.1.4.1.4981.6.1.2.15.2.1.2
rdnModemExclusionSpectrumGroupIface The text name of the cable interface, associated with this excluded modem	OctetString Constraints: range: 1-20	.1.3.6.1.4.1.4981.6.1.2.15.2.1.3
rdnModemExclusionSpectrumGroupId The number index for the spectrum group, that is associated with the excluded modem.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4981.6.1.2.15.2.1.4
rdnModemExclusionMacAddress MAC address of Cable Modem on Exclusion List.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4981.6.1.2.15.2.1.5
rdnModemExclusionSnrValue SNR value for Cable Modem on the Exclusion List	dBDOCS-IF-MIBTenthdB	.1.3.6.1.4.1.4981.6.1.2.15.2.1.7
rdnModemExclusionIPv4Addr IPv4 address of this Cable Modem on the Exclusion List.	INET-ADDRESS-MIBInetAddressIPv4 Type Constraints: range: 4	.1.3.6.1.4.1.4981.6.1.2.15.2.1.8
rdnModemExclusionIPv6Addr IPv6 address of this Cable Modem on the Exclusion List.	INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16	.1.3.6.1.4.1.4981.6.1.2.15.2.1.9

Show reference modems(s) being used for channel assessment

rdnReferenceModemEntry row .1.3.6.1.4.1.4981.6.1.2.16.1.1

List of attributes for an entry in the rdnReferenceModemEntry.
This table has 2 index values:

1) Spectrum group id.

2) ifIndex is the interface index of the upstream physical channel
…

Indexes

rdnSpectrumGroupId IF-MIBifIndex rdnReferenceModemEntryIndex

Column	Syntax	OID
rdnReferenceModemEntryIndex The modem index into the reference modem array.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4981.6.1.2.16.1.1.1
rdnReferenceModemSpectrumGroupName The text name of the spectrum group, associated with this reference modem	OctetString Constraints: range: 1-20	.1.3.6.1.4.1.4981.6.1.2.16.1.1.2
rdnReferenceModemSpectrumGroupId The number index for the spectrum group, that is associated with the reference modem.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4981.6.1.2.16.1.1.3
rdnReferenceModemSpectrumGroupIface The text name of the cable interface, associated with this excluded modem	OctetString Constraints: range: 1-20	.1.3.6.1.4.1.4981.6.1.2.16.1.1.4
rdnReferenceModemMacAddress MAC address of Reference Modem.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4981.6.1.2.16.1.1.5
rdnReferenceModemSnrValue SNR value for Reference Modem	dBDOCS-IF-MIBTenthdB	.1.3.6.1.4.1.4981.6.1.2.16.1.1.6
rdnReferenceModemIPv4Addr IPv4 address of this Reference Modem.	INET-ADDRESS-MIBInetAddressIPv4 Type Constraints: range: 4	.1.3.6.1.4.1.4981.6.1.2.16.1.1.7
rdnReferenceModemIPv6Addr IPv6 address of this Reference Modem.	INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16	.1.3.6.1.4.1.4981.6.1.2.16.1.1.8