rdnCableFrequencyHopFailureTrap

The BSR Spectrum Management feature attempted to initiate
an automatic frequency hop action, for purposes of noise avoidance,
but the hop attempt failed.   The frequency of the upstream channel
is unchanged.  Severity level =  error(4).
          
PARAMETERS:
          
  ifIndex is the interface index of the upstream physical channel
  that attempted an automatic frequency change.
                        
  rdnCardIfSlotNumber is the chassis slot number of the CMTS card
  that is associated with the ifIndex parameter.
          
  rdnCardIfPortNumber is the port number of the receiver
  that is associated with the ifIndex parameter.
          
  rdnSpectrumGroupName is the Spectrum Group name associated
  with the upstream channel that attempted the frequency change.
          
  rdnSpectrumAgilityOldFrequency is the frequency to which
  the upstream channel was tuned, before the attempted
  frequency change.  Presumably, this frequency had an inadequate 
  signal quality, which resulted in the attempted frequency 
  change.  The receiver will still be tuned to this frequency,
  because of the hop failure.
          
  docsIfUpChannelFrequency is the new frequency which
  the failed hop action had attempted to set for the
  upstream channel
          
  docsIfUpChannelWidth is the channel width for the upstream
  channel that attempted the frequency change.
          
  docsIfUpChannelModulationProfile is the modulation profile
  associated with the upstream channel that attempted the
  frequency change. 
          
  rdnCableAgilityHopAbortReason describes the reason that 
  the frequency hop failed

MIB

RDN-CABLE-SPECTRUM-GROUP-MIB

OID

.1.3.6.1.4.1.4981.6.1.2.13.0.10

Type

notification

Status

current

Parent

rdnCableAgilityNotificationPrefix