NG700-SWITCHING-MIB Table View

Agent Trap Log

agentTrapLogEntry row .1.3.6.1.4.1.4526.11.1.1.2.4.1

Agent trap log entry

Indexes

No indexes recorded

Column	Syntax	OID
agentTrapLogIndex Unique index of trap entry	Integer32	.1.3.6.1.4.1.4526.11.1.1.2.4.1.1
agentTrapLogSystemTime System uptime when trap was sent. This entry shows how long the system has been up when the trap occurred.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4526.11.1.1.2.4.1.2
agentTrapLogTrap Description of the trap sent.	OctetString	.1.3.6.1.4.1.4526.11.1.1.2.4.1.3

Supported MIB table

agentSupportedMibEntry row .1.3.6.1.4.1.4526.11.1.1.3.1

Supported MIB entry

Indexes

No indexes recorded

Column	Syntax	OID
agentSupportedMibIndex Unique index of the Supported MIB entry	Integer32	.1.3.6.1.4.1.4526.11.1.1.3.1.1
agentSupportedMibName The name of the MIB (RFC or IEEE) that is supported.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4526.11.1.1.3.1.2
agentSupportedMibDescription Description of the MIB (RFC or IEEE) that is supported.	OctetString	.1.3.6.1.4.1.4526.11.1.1.3.1.3

A table of Task and cpu utilization.

agentSwitchCpuProcessEntry row .1.3.6.1.4.1.4526.11.1.1.4.8.1

Represents entry for a Task Table.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchCpuProcessIndex Unique index of process table	Integer32	.1.3.6.1.4.1.4526.11.1.1.4.8.1.1
agentSwitchCpuProcessName Name of the process	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4526.11.1.1.4.8.1.2
agentSwitchCpuProcessPercentageUtilization CPU utilization per task in Percentage over a period of 5, 60, 300 seconds, and the Rising threshold period also in seconds, if configured.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4526.11.1.1.4.8.1.3
agentSwitchCpuProcessId Process ID	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4526.11.1.1.4.8.1.4

Table lists the number of packets dropped at each CoS queue for the CPU.

agentSwitchCpuCosQDropEntry row .1.3.6.1.4.1.4526.11.1.1.6.1.1

Packet drop statistics for a CPU CoS queue.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchCpuCosQIndex Unique index of a CPU CoS queue.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.1.6.1.1.1
agentSwitchCpuCosQDrops Number of packets dropped at this CPU CoS queue because the queue was full.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.1.6.1.1.2

Table lists information about message buffer allocation for packets arriving at the CPU.

agentSwitchMbufEntry row .1.3.6.1.4.1.4526.11.1.1.7.2.1

Information on a specific class of message buffers.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchMbufPrio Message buffer priority.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.1.7.2.1.1
agentSwitchMbufClassName Name of this class of message buffer.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4526.11.1.1.7.2.1.2
agentSwitchMbufAllocAttempts Number of times the system tried to allocate a message buffer allocation of this class.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.1.7.2.1.3
agentSwitchMbufAllocFails Number of message buffer allocation failures for this class of message buffer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.1.7.2.1.4

A table of the switch's login session

agentLoginSessionEntry row .1.3.6.1.4.1.4526.11.1.2.1.1.1

Login Session Entry

Indexes

No indexes recorded

Column	Syntax	OID
agentLoginSessionIndex Agent Login Session Index of the switch	Integer32	.1.3.6.1.4.1.4526.11.1.2.1.1.1.1
agentLoginSessionUserName Agent Login Session UserName of the switch	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4526.11.1.2.1.1.1.2
agentLoginSessionIPAddressobsolete Agent Login Session IP Address of the switch	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4526.11.1.2.1.1.1.3
agentLoginSessionConnectionType Agent Login Session Connection Type of the switch	Enumeration	.1.3.6.1.4.1.4526.11.1.2.1.1.1.4
agentLoginSessionIdleTime Agent Login Session Idle Time of the switch	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.2.1.1.1.5
agentLoginSessionSessionTime Agent Login Session Time of the switch	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.2.1.1.1.6
agentLoginSessionStatus Status of the user. active(1) - This connection is active. destroy(6) - Set to this value to disconnect this user.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.11.1.2.1.1.1.7
agentLoginSessionInetAddressType Type of address agentLoginSessionInetAddress is returning. Can be either unknown(0), ipv4(1), or ipv6 (2). Will return unknown(0) in the case of a serial login.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.4526.11.1.2.1.1.1.8
agentLoginSessionInetAddress Inet Address of the connecting the user is logging in with. Will return a zero-length string in the case of a serial login.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.4526.11.1.2.1.1.1.9

User Config Table

agentUserConfigEntry row .1.3.6.1.4.1.4526.11.1.2.1.3.2.1

User Config Entry

Indexes

No indexes recorded

Column	Syntax	OID
agentUserIndex Agent User Config Index	Integer32	.1.3.6.1.4.1.4526.11.1.2.1.3.2.1.1
agentUserName Agent User Name. This string is limited to alpha-numeric strings (including the '-' and '_' characters).	OctetStringr/w	.1.3.6.1.4.1.4526.11.1.2.1.3.2.1.2
agentUserPassword Agent User Password This object will return an empty string even if a password is set.	OctetStringr/w	.1.3.6.1.4.1.4526.11.1.2.1.3.2.1.3
agentUserAccessMode Agent User Access Mode	Enumerationr/w	.1.3.6.1.4.1.4526.11.1.2.1.3.2.1.4
agentUserStatus Agent User Status. active(1) - This user account is active. destroy(6) - Set to this value to remove this user account.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.11.1.2.1.3.2.1.5
agentUserAuthenticationType SNMPv3 User Authentication. The user passsword must be set to a string greater than or equal to 8 characters for this to be set to anything but none(1). none(1) - no authentication used hmacmd5(1) …	Enumerationr/w	.1.3.6.1.4.1.4526.11.1.2.1.3.2.1.6
agentUserEncryptionType SNMPv3 User Encryption Can not be set to des(2) if agentUserAuthenticationType is set to none(1). none(1) - no encryption used des(2) - DES encryption used	Enumerationr/w	.1.3.6.1.4.1.4526.11.1.2.1.3.2.1.7
agentUserEncryptionPassword SNMPv3 User Encryption Password This object will return an empty string even if a password is set. agentUserEncryptionType must be set to des(2) before this object can be configured. This object will return an empty str…	OctetStringr/w	.1.3.6.1.4.1.4526.11.1.2.1.3.2.1.8
agentUserLockoutStatus Displays whether the user account is locked due to excessive failed login attempts.	Enumeration	.1.3.6.1.4.1.4526.11.1.2.1.3.2.1.9
agentUserPasswordExpireTime Date and time when the user's password expires (past or present). Only valid when password aging is enabled.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.4526.11.1.2.1.3.2.1.10

Represents Password strength restricted keywords from the configurable password.

agentPasswordManagementStrengthExcludeKeywordEntry row .1.3.6.1.4.1.4526.11.1.2.1.6.15.1

Represents Password strength restricted keywords from the configurable password.

Indexes

No indexes recorded

Column	Syntax	OID
agentPasswordMgmtStrengthExcludeKeyword Specifies the given keyword string restricted from the configurable password.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4526.11.1.2.1.6.15.1.1
agentPasswordMgmtStrengthExcludeKeywordStatus Create the Exclude Keyword Index and configure (Create or Destroy) the keyword to it.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.11.1.2.1.6.15.1.2

A table for dot1x Client details and associated functionality.

agentIASUserConfigEntry row .1.3.6.1.4.1.4526.11.1.2.1.7.2.1

Represents entry for port config table.

Indexes

No indexes recorded

Column	Syntax	OID
agentIASUserIndex IAS user config index.	Integer32	.1.3.6.1.4.1.4526.11.1.2.1.7.2.1.1
agentIASUserName IAS user name. This string is limited to alpha-numeric strings (including '-' and '_' characters).	OctetStringr/w	.1.3.6.1.4.1.4526.11.1.2.1.7.2.1.2
agentIASUserPassword IAS user password.	OctetStringr/w	.1.3.6.1.4.1.4526.11.1.2.1.7.2.1.3
agentIASUserStatus IAS User Status. active(1) - This user account is active. destroy(6) - Set to this value to remove this user account.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.11.1.2.1.7.2.1.4

A summary table of the switch's LAG config entries

agentLagSummaryConfigEntry row .1.3.6.1.4.1.4526.11.1.2.2.2.1

Switch's LAG config entry

Indexes

No indexes recorded

Column	Syntax	OID
agentLagSummaryLagIndex Agent LAG IfIndex. This value corresponds with the LAG interface in the ifTable.	Integer32	.1.3.6.1.4.1.4526.11.1.2.2.2.1.1
agentLagSummaryName Agent LAG Name. The associated name of the LAG used during creation. Duplicate names are not allowed.	OctetStringr/w	.1.3.6.1.4.1.4526.11.1.2.2.2.1.2
agentLagSummaryFlushTimerobsolete Agent LAG FlushTimer.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.11.1.2.2.2.1.3
agentLagSummaryLinkTrap Agent LAG LinkTrap. Configures sending Link Up/Down traps when the LAG interface goes Up or Down.	Enumerationr/w	.1.3.6.1.4.1.4526.11.1.2.2.2.1.4
agentLagSummaryAdminMode Agent LAG AdminMode. Administratively enables or disables this LAG interface.	Enumerationr/w	.1.3.6.1.4.1.4526.11.1.2.2.2.1.5
agentLagSummaryStpMode Agent LAG StpMode Administratively enables or disables STP on this interface.	Enumerationr/w	.1.3.6.1.4.1.4526.11.1.2.2.2.1.6
agentLagSummaryAddPort Agent LAG AddPort. Set to a non 0 value to add a port to the LAG. Values correspond to ifIndex values in the ifTable. Note: agentPortType for the port to be added must be full duplex and t…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.11.1.2.2.2.1.7
agentLagSummaryDeletePort Agent LAG DeletePort. Set to a non 0 value to remove a port from the LAG. Values correspond to ifIndex values in the ifTable.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.11.1.2.2.2.1.8
agentLagSummaryStatus Agent LAG Status. active(1) - This LAG is enabled. destroy(6) - Set to this value to remove the LAG.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.11.1.2.2.2.1.9
agentLagSummaryType Agent LAG Type. static(1) - This LAG is staticly maintained. dynamic(2) - This LAG is dynamicly maintained.	Enumeration	.1.3.6.1.4.1.4526.11.1.2.2.2.1.10
agentLagSummaryStaticCapability Agent LAG Static Capability enable(1) - Static capability is enabled for this LAG interface disable(2) - Static capability is disabled for this LAG interface	Enumerationr/w	.1.3.6.1.4.1.4526.11.1.2.2.2.1.11
agentLagSummaryHashOption LAG Hashing Option. Valid values correspond to 1 (=Source MAC, VLAN, EtherType, and incoming port associated with the packet) 2 (=Destination MAC, VLAN, EtherType, and incoming port …	Integer32r/w	.1.3.6.1.4.1.4526.11.1.2.2.2.1.12
agentLagSummaryMinimumActiveLinks Agent LAG Threshold. This configures the threshold(i.e minimum number of active ports) value for trunk port .	Integer32r/w	.1.3.6.1.4.1.4526.11.1.2.2.2.1.13
agentLagSummaryMtuValue Configures the MTU value for this LAG interface. The maximum value is dependent on the platform.	Unsigned32r/w	.1.3.6.1.4.1.4526.11.1.2.2.2.1.15
agentLagSummaryPortCounter LAG port flap counter.	Integer32	.1.3.6.1.4.1.4526.11.1.2.2.2.1.17

A detailed table of the switch's LAG config entries

agentLagDetailedConfigEntry row .1.3.6.1.4.1.4526.11.1.2.2.3.1

Switch's LAG config entry

Indexes

No indexes recorded

Column	Syntax	OID
agentLagDetailedLagIndex LAG index	Integer32	.1.3.6.1.4.1.4526.11.1.2.2.3.1.1
agentLagDetailedIfIndex LAG port index	Integer32	.1.3.6.1.4.1.4526.11.1.2.2.3.1.2
agentLagDetailedPortSpeed LAG port speed. See agentPortType for a description and list of valid values.	ObjectIdentifier	.1.3.6.1.4.1.4526.11.1.2.2.3.1.3
agentLagDetailedPortStatus LAG port status. active(1) - Actively participating in the LAG. inactive(2) - Not participating in the LAG.	Enumeration	.1.3.6.1.4.1.4526.11.1.2.2.3.1.4
agentLagDetailedPortCounter LAG port flap counter.	Integer32	.1.3.6.1.4.1.4526.11.1.2.2.3.1.5

The list of IPv6 address prefixes
for the network port.

agentNetworkIpv6AddrEntry row .1.3.6.1.4.1.4526.11.1.2.3.14.1

An interface entry containing objects of
a particular IPv6 address prefix

Indexes

No indexes recorded

Column	Syntax	OID
agentNetworkIpv6AddrPrefix The service port IPv6 Address Prefix	Ipv6AddressPrefix Type Constraints: range: 0..16	.1.3.6.1.4.1.4526.11.1.2.3.14.1.1
agentNetworkIpv6AddrPrefixLength The service port IPv6 Address Prefix Length	Integer32r/w	.1.3.6.1.4.1.4526.11.1.2.3.14.1.2
agentNetworkIpv6AddrEuiFlag The service port IPv6 Eui Flag	Enumerationr/w	.1.3.6.1.4.1.4526.11.1.2.3.14.1.3
agentNetworkIpv6AddrStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.11.1.2.3.14.1.4

The list of IPv6 address prefixes for the
service port.

agentServicePortIpv6AddrEntry row .1.3.6.1.4.1.4526.11.1.2.4.9.1

An interface entry containing objects of
a particular IPv6 address prefix

Indexes

No indexes recorded

Column	Syntax	OID
agentServicePortIpv6AddrPrefix The service port IPv6 Address Prefix	Ipv6AddressPrefix Type Constraints: range: 0..16	.1.3.6.1.4.1.4526.11.1.2.4.9.1.1
agentServicePortIpv6AddrPrefixLength The service port IPv6 Address Prefix Length	Integer32r/w	.1.3.6.1.4.1.4526.11.1.2.4.9.1.2
agentServicePortIpv6AddrEuiFlag The service port IPv6 Eui Flag	Enumerationr/w	.1.3.6.1.4.1.4526.11.1.2.4.9.1.3
agentServicePortIpv6AddrStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.11.1.2.4.9.1.4

A table of the switch's SNMP Config entries

agentSnmpCommunityConfigEntry row .1.3.6.1.4.1.4526.11.1.2.6.2.1

Switch's SNMP Config entry

Indexes

No indexes recorded

Column	Syntax	OID
agentSnmpCommunityIndex The switch's Snmp Community Index	Integer32	.1.3.6.1.4.1.4526.11.1.2.6.2.1.1
agentSnmpCommunityName The switch's Snmp Community Name This name identifies each SNMP community; the name can be up to 16 characters, and it is case-sensitive. Community names in the SNMP community must be unique. If you make multiple entrie…	OctetStringr/w	.1.3.6.1.4.1.4526.11.1.2.6.2.1.2
agentSnmpCommunityIPAddress The switch's Snmp Community IP Address Client IP Address - This attribute is an IP address (or portion thereof) from which this device will accept SNMP packets with the associated community. The requesting entity's IP a…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4526.11.1.2.6.2.1.3
agentSnmpCommunityIPMask The switch's Snmp Community IP Mask Client IP Mask - This attribute is a mask to be logical-ANDed with the requesting entity's IP address before comparison with the Client IP Address. If the result matches with Client I…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4526.11.1.2.6.2.1.4
agentSnmpCommunityAccessMode The switch's Snmp Community Access Mode Access Mode - This value can be read-only or read/write. A community with a read-only access allows for switch information to be displayed. A community with a read/write access al…	Enumerationr/w	.1.3.6.1.4.1.4526.11.1.2.6.2.1.5
agentSnmpCommunityStatus The switch's Snmp Community Status. active(1) - This community is active, allowing SNMP managers associated with this community to manage the switch according to its …	Enumerationr/w	.1.3.6.1.4.1.4526.11.1.2.6.2.1.6

Trap messages are sent across a network to an SNMP Network Manager.
These messages alert the manager to events occurring within the switch
or on the network. Up to six simultaneous trap receivers are supported.

agentSnmpTrapReceiverConfigEntry row .1.3.6.1.4.1.4526.11.1.2.6.4.1

Switch's Snmp Trace Receiver Config entry

Indexes

No indexes recorded

Column	Syntax	OID
agentSnmpTrapReceiverIndex The switch's Snmp Trap Receiver Index	Integer32	.1.3.6.1.4.1.4526.11.1.2.6.4.1.1
agentSnmpTrapReceiverCommunityName The switch's Snmp Trap Receiver Community Name. This is the SNMP community name of the remote network manager; the name can be up to 16 characters, and is case-sensitive.	OctetStringr/w	.1.3.6.1.4.1.4526.11.1.2.6.4.1.2
agentSnmpTrapReceiverIPAddressobsolete IP Address - Each IP address parameter is four integer numbers. The numbers range from 0 to 255.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4526.11.1.2.6.4.1.3
agentSnmpTrapReceiverStatus The switch's Snmp Trap Reciever Status. active(1) - This trap receiver is active, allowing SNMP Traps to be sent to this receiver. notInService(2) - This trap reciever is not ac…	Enumerationr/w	.1.3.6.1.4.1.4526.11.1.2.6.4.1.4
agentSnmpTrapReceiverVersion The version of trap sent to this Reciever. snmpv1(1) - This will send a SNMPv1 trap. snmpv2c(2) - This will send a SNMPv2c trap.	Enumerationr/w	.1.3.6.1.4.1.4526.11.1.2.6.4.1.5
agentSnmpTrapReceiverIpv6Addressobsolete IPv6 Address for SNMP receiver.	Ipv6AddressPrefixr/w Type Constraints: range: 0..16	.1.3.6.1.4.1.4526.11.1.2.6.4.1.6
agentSnmpTrapReceiverAddressType The type of the snmptrap reciever address. The agentSnmpTrapReceiverAddress object is intepreted within the context of agentSnmpTrapReceiverAddressType	Enumerationr/w	.1.3.6.1.4.1.4526.11.1.2.6.4.1.7
agentSnmpTrapReceiverAddress The snmptrap reciever address. The type of this address is determined by the value of the agentSnmpTrapReceiverAddressType object. The values for agentSnmpTrapReceiverAddressType and agentSnmpTrapReceiver…	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.4526.11.1.2.6.4.1.8

The switch's static Mac filtering table

agentSwitchStaticMacFilteringEntry row .1.3.6.1.4.1.4526.11.1.2.8.5.1

Per-port ingress/egress filter configuration based on VLAN Id and MAC address.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchStaticMacFilteringVlanId The Static MAC Filter Vlan Id	Integer32	.1.3.6.1.4.1.4526.11.1.2.8.5.1.1
agentSwitchStaticMacFilteringAddress The Static MAC Filter MAC address	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4526.11.1.2.8.5.1.2
agentSwitchStaticMacFilteringSourcePortMask The Static MAC Filter source port mask. When setting this value, the system will ignore configuration for ports not between the first and last valid ports. Configuration of any port numbers between this …	NG700-REF-MIBAgentPortMaskr/w	.1.3.6.1.4.1.4526.11.1.2.8.5.1.3
agentSwitchStaticMacFilteringDestPortMask The Static MAC Filter destination port mask. When setting this value, the system will ignore configuration for ports not between the first and last valid ports. Configuration of any port numbers between …	NG700-REF-MIBAgentPortMaskr/w	.1.3.6.1.4.1.4526.11.1.2.8.5.1.4
agentSwitchStaticMacFilteringStatus The Static MAC Filter status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.11.1.2.8.5.1.5

A table of the IGMP/MLD Snooping Global configuration entries.

agentSwitchSnoopingCfgEntry row .1.3.6.1.4.1.4526.11.1.2.8.6.1.1

Represents entry for Snooping switch Configuration.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchSnoopingProtocol The protocol type of network protocol in use.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.4526.11.1.2.8.6.1.1.1
agentSwitchSnoopingAdminMode This enables or disables Snooping on the system.	Enumerationr/w	.1.3.6.1.4.1.4526.11.1.2.8.6.1.1.2
agentSwitchSnoopingPortMask IGMP/MLD Snooping Port Mask. This allows configuration of IGMP/MLD Snooping on selected ports. IGMP/MLD Snooping cannot be enabled on an interface that has routing enabled, or is a member of a LAG. If a …	NG700-REF-MIBAgentPortMaskr/w	.1.3.6.1.4.1.4526.11.1.2.8.6.1.1.3
agentSwitchSnoopingMulticastControlFramesProcessed Multicast Control Frames Processed by CPU. The number of multicast control frames that have been processed by the CPU.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.2.8.6.1.1.4

A table of the IGMP/MLD Snooping Interface configuration entries.

agentSwitchSnoopingIntfEntry row .1.3.6.1.4.1.4526.11.1.2.8.7.1.1

Represents entry for a IGMP/MLD Snooping Interface.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchSnoopingIntfIndex The port number to be selected. Each port maps to an interface.	Unsigned32	.1.3.6.1.4.1.4526.11.1.2.8.7.1.1.1
agentSwitchSnoopingIntfAdminMode This enables or disables IGMP/MLD Snooping on a selected interface.	Enumerationr/w	.1.3.6.1.4.1.4526.11.1.2.8.7.1.1.2
agentSwitchSnoopingIntfGroupMembershipInterval The amount of time in seconds that a switch will wait for a report from a particular group on the selected interface before deleting the interface from the entry. This value must be greater than agentSwitchSnoopingIntfM…	Integer32r/w	.1.3.6.1.4.1.4526.11.1.2.8.7.1.1.3
agentSwitchSnoopingIntfMaxResponseTime The amount of time in seconds a switch will wait after sending a query on the selected interface because it did not receive a report for a particular group in that interface. This value must be less than agentSwitchSno…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.11.1.2.8.7.1.1.4
agentSwitchSnoopingIntfMRPExpirationTime The amount of time in seconds that a switch will wait for a query to be received on the selected interface before the interface is removed from the list of interfaces with multicast routers attached.	Integer32r/w	.1.3.6.1.4.1.4526.11.1.2.8.7.1.1.5
agentSwitchSnoopingIntfFastLeaveAdminMode This enables or disables IGMP/MLD Snooping on the selected interface.	Enumerationr/w	.1.3.6.1.4.1.4526.11.1.2.8.7.1.1.6
agentSwitchSnoopingIntfMulticastRouterMode This enables or disables Multicast Routing on the selected interface.	Enumerationr/w	.1.3.6.1.4.1.4526.11.1.2.8.7.1.1.7
agentSwitchSnoopingIntfVlanIDs This field lists all the VlanIDs which include the selected interface.	VlanList	.1.3.6.1.4.1.4526.11.1.2.8.7.1.1.8

A table of the IGMP/MLD Snooping Vlan configuration entries.

agentSwitchSnoopingVlanEntry row .1.3.6.1.4.1.4526.11.1.2.8.8.1.1

Represents entry for a IGMP/MLD Snooping Vlan.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchSnoopingVlanAdminMode This enables or disables IGMP/MLD Snooping on a selected Vlan interface.	Enumerationr/w	.1.3.6.1.4.1.4526.11.1.2.8.8.1.1.1
agentSwitchSnoopingVlanGroupMembershipInterval The amount of time in seconds that a switch will wait for a report from a particular group on the selected vlan before deleting the interface participating in the vlan from the entry. This value must be greater than age…	Integer32r/w	.1.3.6.1.4.1.4526.11.1.2.8.8.1.1.2
agentSwitchSnoopingVlanMaxResponseTime The amount of time in seconds a switch will wait after sending a query on the selected vlan because it did not receive a report for a particular group in the interface participating in the vlan. This value must be less …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.11.1.2.8.8.1.1.3
agentSwitchSnoopingVlanFastLeaveAdminMode This enables or disables IGMP/MLD Snooping on the selected vlan.	Enumerationr/w	.1.3.6.1.4.1.4526.11.1.2.8.8.1.1.4
agentSwitchSnoopingVlanMRPExpirationTime The amount of time in seconds that a switch will wait for a query to be received on the selected interface participating in the vlan before the interface is removed from the list of interfaces with multicast routers att…	Integer32r/w	.1.3.6.1.4.1.4526.11.1.2.8.8.1.1.5
agentSwitchSnoopingVlanReportSuppMode This enables or disables IGMP/MLD Snooping Report Suppression feature on the selected vlan.	Enumerationr/w	.1.3.6.1.4.1.4526.11.1.2.8.8.1.1.6

A table of the IGMP/MLD Static Mrouter Configuration parameters.

agentSwitchVlanStaticMrouterEntry row .1.3.6.1.4.1.4526.11.1.2.8.9.1.1

Represents entry for a IGMP/MLD Static Mrouter.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchVlanStaticMrouterAdminMode This enables or disables IGMP/MLD Mrouter on a per-interface per-vlan basis.	Enumerationr/w	.1.3.6.1.4.1.4526.11.1.2.8.9.1.1.1

The Multicast Forwarding Database table

agentSwitchMFDBEntry row .1.3.6.1.4.1.4526.11.1.2.8.10.1.1

Contains Forwarding and Filtering information per Vlan Index, MAC Address, and
Component User.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchMFDBVlanId Vlan Index for which this entry is associated with.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.4526.11.1.2.8.10.1.1.1
agentSwitchMFDBMacAddress A multicast MAC address for which the switch has forwarding and or filtering information.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4526.11.1.2.8.10.1.1.2
agentSwitchMFDBProtocolType The component that is responsible for this entry in the Multicast Forwarding Database.	Enumeration	.1.3.6.1.4.1.4526.11.1.2.8.10.1.1.3
agentSwitchMFDBType This displays the type of the entry. static(1) - Entries configured by the end user dynamic(2) - Entries added as a result of a learning process or protocol	Enumeration	.1.3.6.1.4.1.4526.11.1.2.8.10.1.1.4
agentSwitchMFDBDescription Text description of this multicast table entry.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4526.11.1.2.8.10.1.1.5
agentSwitchMFDBForwardingPortMask BitMask indicating which ports this entry indicates should be forwarded. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTa…	NG700-REF-MIBAgentPortMask	.1.3.6.1.4.1.4526.11.1.2.8.10.1.1.6
agentSwitchMFDBFilteringPortMask BitMask indicating which ports this entry indicates should be filtered. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTab…	NG700-REF-MIBAgentPortMask	.1.3.6.1.4.1.4526.11.1.2.8.10.1.1.7

The Multicast Forwarding Database Summary table

agentSwitchMFDBSummaryEntry row .1.3.6.1.4.1.4526.11.1.2.8.10.2.1

Summarizes the forwarding ports for all components registered for all
MFDB table entries with the same Vlan Index and MAC Address.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchMFDBSummaryVlanId Vlan Index for which this entry is associated with.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.4526.11.1.2.8.10.2.1.1
agentSwitchMFDBSummaryMacAddress A multicast MAC address for which the switch has forwarding and or filtering information.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4526.11.1.2.8.10.2.1.2
agentSwitchMFDBSummaryForwardingPortMask Port Mask indicating which ports this entry indicates should be forwarded. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfig…	NG700-REF-MIBAgentPortMask	.1.3.6.1.4.1.4526.11.1.2.8.10.2.1.3

The switch's MAC To VLAN association table

agentSwitchVlanMacAssociationEntry row .1.3.6.1.4.1.4526.11.1.2.8.17.1.1

VLAN to be assigned to untagged or priority tagged
packets based on MAC address.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchVlanMacAssociationMacAddress The Mac address	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4526.11.1.2.8.17.1.1.1
agentSwitchVlanMacAssociationVlanId The VLAN the Mac address assigned to	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.4526.11.1.2.8.17.1.1.2
agentSwitchVlanMacAssociationRowStatus The Mac to VLAN association row status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.11.1.2.8.17.1.1.3

The switch's protected port mapping table

agentSwitchProtectedPortEntry row .1.3.6.1.4.1.4526.11.1.2.8.18.1.1

Protected ports assigned to groups.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchProtectedPortGroupId The group that this port belongs to	Integer32	.1.3.6.1.4.1.4526.11.1.2.8.18.1.1.1
agentSwitchProtectedPortGroupName The name of the group	OctetStringr/w	.1.3.6.1.4.1.4526.11.1.2.8.18.1.1.2
agentSwitchProtectedPortPortList The set of ports that are protected in this group	PortListr/w	.1.3.6.1.4.1.4526.11.1.2.8.18.1.1.3

A table of the IGMP/MLD Snooping Querier Global configuration entries.

agentSwitchSnoopingQuerierCfgEntry row .1.3.6.1.4.1.4526.11.1.2.8.20.1.1

Represents entry for Snooping Querier Configuration.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchSnoopingQuerierAdminMode This enables or disables Snooping Querier on the system.	Enumerationr/w	.1.3.6.1.4.1.4526.11.1.2.8.20.1.1.1
agentSwitchSnoopingQuerierVersion This specifies the multicast protocol versions that are supported by the system.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.11.1.2.8.20.1.1.2
agentSwitchSnoopingQuerierAddress This specifies the default source ip address to be used while generating general queries.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.4526.11.1.2.8.20.1.1.3
agentSwitchSnoopingQuerierQueryInterval This specified the timer interval after which the system generates general queries.	Integer32r/w	.1.3.6.1.4.1.4526.11.1.2.8.20.1.1.4
agentSwitchSnoopingQuerierExpiryInterval This specified the timer interval after which the detected other querier information is no longer valid.	Integer32r/w	.1.3.6.1.4.1.4526.11.1.2.8.20.1.1.5

A table of the Snooping Querier Vlan configuration entries.

agentSwitchSnoopingQuerierVlanEntry row .1.3.6.1.4.1.4526.11.1.2.8.20.2.1

Represents entry for a Snooping Querier configurable Vlan.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchSnoopingQuerierVlanAdminMode This enables or disables Snooping Querier on a selected Vlan interface.	Enumerationr/w	.1.3.6.1.4.1.4526.11.1.2.8.20.2.1.1
agentSwitchSnoopingQuerierVlanOperMode This specifies the current state of the Snooping Querier on a selected vlan interface	Enumeration	.1.3.6.1.4.1.4526.11.1.2.8.20.2.1.2
agentSwitchSnoopingQuerierElectionParticipateMode This enables or disables the Snooping Querier Election Participation mode. When enabled snooping querier switch will participate in querier election up on discovering another querier in the specified vlan. When disabled…	Enumerationr/w	.1.3.6.1.4.1.4526.11.1.2.8.20.2.1.3
agentSwitchSnoopingQuerierVlanAddress This specifies the default source ip address to be used while generating general queries on the specified vlan.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.4526.11.1.2.8.20.2.1.4
agentSwitchSnoopingQuerierOperVersion This specifies the multicast protocol version that is currently being used by the snooping switch for the specified vlan while generating query messages.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.11.1.2.8.20.2.1.5
agentSwitchSnoopingQuerierOperMaxResponseTime The amount of time in seconds a switch will wait after sending a query on the selected vlan because it did not receive a report for a particular group in the interface participating in the vlan. This object is valid onl…	Integer32	.1.3.6.1.4.1.4526.11.1.2.8.20.2.1.6
agentSwitchSnoopingQuerierLastQuerierAddress This specifies the last querier's ip address for the specified vlan. It represents the detected other multicast querier in the vlan.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.4526.11.1.2.8.20.2.1.7
agentSwitchSnoopingQuerierLastQuerierVersion This specifies the multicast protocol version that is currently being used by the detected other multicast querier for the specified vlan. (-1) - indicates that parameter is not available.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.11.1.2.8.20.2.1.8

A table provides the mechanism to control Dynamic ARP
Inspection per VLAN. When a VLAN is created in a device
supporting this table, a corresponding entry of this table
will be added.

agentDaiVlanConfigEntry row .1.3.6.1.4.1.4526.11.1.2.8.21.4.1

A row instance contains the configuration for Dynamic
ARP Inspection at each existing VLAN.

Indexes

No indexes recorded

Column	Syntax	OID
agentDaiVlanIndex This object indicates the VLAN number on which Dynamic ARP Inspection feature is configured.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.4526.11.1.2.8.21.4.1.1
agentDaiVlanDynArpInspEnable This object indicates whether Dynamic ARP Inspection is enabled in this VLAN. If this object is set to 'true', Dynamic ARP Inspection is enabled. If this object is set to 'false', Dynamic A…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4526.11.1.2.8.21.4.1.2
agentDaiVlanLoggingEnable This object indicates whether the Dynamic ARP Inspection logging is enabled on this VlAN. If this object is set to 'true', Dynamic ARP Inspection logging is enabled. If this object is set to 'false', Dynamic ARP Inspect…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4526.11.1.2.8.21.4.1.3
agentDaiVlanArpAclName This object indicates the ARP ACL name set for this VLAN.	OctetStringr/w	.1.3.6.1.4.1.4526.11.1.2.8.21.4.1.4
agentDaiVlanArpAclStaticFlag This object indicates whether the ARP ACL set for this VLAN has static flag set. If this object is set to 'true', static flag is enabled. If this object is set to 'false', static flag is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4526.11.1.2.8.21.4.1.5

A table provides the mechanism to control Dynamic ARP
Inspection per VLAN. When a VLAN is created in a device
supporting this table, a corresponding entry of this table
will be added.

agentDaiVlanStatsEntry row .1.3.6.1.4.1.4526.11.1.2.8.21.6.1

A row instance contains the Dynamic ARP Inspection
statistics per VLAN.

Indexes

No indexes recorded

Column	Syntax	OID
agentDaiVlanStatsIndex This object indicates the VLAN number on which Dynamic ARP Inspection statistics are retrieved.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.4526.11.1.2.8.21.6.1.1
agentDaiVlanPktsForwarded Number of valid ARP packets forwarded by DAI.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.2.8.21.6.1.2
agentDaiVlanPktsDropped Number of invalid ARP packets dropped by DAI.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.2.8.21.6.1.3
agentDaiVlanDhcpDrops Number of ARP packets that were dropped by DAI as there is no matching DHCP Snooping binding entry found.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.2.8.21.6.1.4
agentDaiVlanDhcpPermits Number of ARP packets that were forwarded by DAI as there is a matching DHCP Snooping binding entry found.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.2.8.21.6.1.5
agentDaiVlanAclDrops Number of ARP packets that were dropped by DAI as there is no matching ARP ACL rule found for this Vlan and the static flag is set on this vlan.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.2.8.21.6.1.6
agentDaiVlanAclPermits Number of ARP packets that were permitted by DAI as there is a matching ARP ACL rule found for this Vlan.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.2.8.21.6.1.7
agentDaiVlanSrcMacFailures Number of ARP packets that were dropped by DAI as the sender mac address in ARP packet didn't match the source mac in ethernet header.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.2.8.21.6.1.8
agentDaiVlanDstMacFailures Number of ARP packets that were dropped by DAI as the target mac address in ARP reply packet didn't match the destination mac in ethernet header.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.2.8.21.6.1.9
agentDaiVlanIpValidFailures Number of ARP packets that were dropped by DAI as the sender IP address in ARP packet or target IP address in ARP reply packet is invalid. Invalid addresses include 0.0.0.0, 255.255.255.255, IP multicast addresses, clas…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.2.8.21.6.1.10

A table provides the mechanism to configure the trust
state for Dynamic ARP Inspection purpose at each physical
interface capable of this feature.

agentDaiIfConfigEntry row .1.3.6.1.4.1.4526.11.1.2.8.21.7.1

A row instance contains the configuration for
Dynamic ARP Inspection at each physical
interface capable of this feature.

Indexes

No indexes recorded

Column	Syntax	OID
agentDaiIfTrustEnable This object indicates whether the interface is trusted for Dynamic ARP Inspection purpose. If this object is set to 'true', the interface is trusted. ARP packets coming to this interface will be forwarded…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4526.11.1.2.8.21.7.1.1
agentDaiIfRateLimit This object indicates rate limit value for Dynamic ARP Inspection purpose. If the incoming rate of ARP packets exceeds the value of this object for consecutively burst interval seconds, ARP packets will be dropped. Valu…	packets per secondInteger32r/w	.1.3.6.1.4.1.4526.11.1.2.8.21.7.1.2
agentDaiIfBurstInterval This object indicates the burst interval value for rate limiting purpose on this interface.	Unsigned32r/w	.1.3.6.1.4.1.4526.11.1.2.8.21.7.1.3

A table of the ARP ACL entries

agentArpAclEntry row .1.3.6.1.4.1.4526.11.1.2.8.22.1.1

Represents entry for an ARP ACL

Indexes

No indexes recorded

Column	Syntax	OID
agentArpAclName Name of the ARP ACL, which must consist of 1 to 31 alphanumeric characters and uniquely identify this ARP ACL. This object must be set to complete a new ARP ACL row instance.	OctetStringr/w	.1.3.6.1.4.1.4526.11.1.2.8.22.1.1.1
agentArpAclRowStatus The status of this conceptual row. Entries can not be deleted until all rows in arpAclRuleTable with corresponding values of arpAclIndex have been deleted. active(1) - this ACL instance is active cr…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.11.1.2.8.22.1.1.2

A table of the ARP ACL Rule entries

agentArpAclRuleEntry row .1.3.6.1.4.1.4526.11.1.2.8.22.2.1

Represents entry for a set of ARP ACL-match rules

Indexes

No indexes recorded

Column	Syntax	OID
agentArpAclRuleMatchSenderIpAddr Sender IP address match value for the ARP ACL.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4526.11.1.2.8.22.2.1.1
agentArpAclRuleMatchSenderMacAddr Sender MAC address match value for the ARP ACL.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4526.11.1.2.8.22.2.1.2
agentArpAclRuleRowStatus The status of this conceptual row. active(1) - this ACL Rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.11.1.2.8.22.2.1.3

A table provides the mechanism to control DHCP SNOOPING
per VLAN. When a VLAN is created in a device
supporting this table, a corresponding entry of this table
will be added.

agentDhcpSnoopingVlanConfigEntry row .1.3.6.1.4.1.4526.11.1.2.8.23.3.1

A row instance contains the configuration for DHCP
SNOOPING at each existing VLAN.

Indexes

No indexes recorded

Column	Syntax	OID
agentDhcpSnoopingVlanIndex This object indicates the VLAN number on which DHCP SNOOPING Inspection feature is configured.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.4526.11.1.2.8.23.3.1.1
agentDhcpSnoopingVlanEnable This object indicates whether DHCP SNOOPING is enabled in this VLAN. If this object is set to 'true', DHCP SNOOPING is enabled. If this object is set to 'false', DHCP SNOOPING is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4526.11.1.2.8.23.3.1.2

A table provides the mechanism to configure the trust
state for DHCP snooping purpose at each physical
interface capable of this feature.

agentDhcpSnoopingIfConfigEntry row .1.3.6.1.4.1.4526.11.1.2.8.23.4.1

A row instance contains the configuration for
DHCP snooping at each physical interface capable of this feature.

Indexes

No indexes recorded

Column	Syntax	OID
agentDhcpSnoopingIfTrustEnable This object indicates whether the interface is trusted for DHCP snooping purpose.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4526.11.1.2.8.23.4.1.1
agentDhcpSnoopingIfLogEnable This object indicates whether the Logging needs on DHCP snooping validations or not	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4526.11.1.2.8.23.4.1.2
agentDhcpSnoopingIfRateLimit This object indicates rate limit value for DHCP Snooping purpose. If the incoming rate of DHCP packets exceeds the value of this object for consecutively burst interval seconds, DHCP packets will be dropped. Value of -1…	packets per secondInteger32r/w	.1.3.6.1.4.1.4526.11.1.2.8.23.4.1.3
agentDhcpSnoopingIfBurstInterval This object indicates the burst interval value for rate limiting purpose on this interface. Value of -1 indicates that there is no burst interval.	Integer32r/w	.1.3.6.1.4.1.4526.11.1.2.8.23.4.1.4

A table provides the mechanism for statics of DHCP snooping.

agentDhcpSnoopingStatsEntry row .1.3.6.1.4.1.4526.11.1.2.8.23.7.1

A row instance contains the DHCP snooping statistics per VLAN.

Indexes

No indexes recorded

Column	Syntax	OID
agentDhcpSnoopingMacVerifyFailures This object indicates the number of failure verifications of client mac address with source mac address	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.2.8.23.7.1.1
agentDhcpSnoopingInvalidClientMessages This object indicates the number of invalid DHCP release, request and decline messages	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.2.8.23.7.1.2
agentDhcpSnoopingInvalidServerMessages This object indicates the number of invalid DHCP server mesaages	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.2.8.23.7.1.3

A table of the DHCP SNOOPING static entries

agentStaticDsBindingEntry row .1.3.6.1.4.1.4526.11.1.2.8.23.10.1

Represents a binding in DHCP SNOOPING table

Indexes

No indexes recorded

Column	Syntax	OID
agentStaticDsBindingIfIndex Interface on which this DHCP SNOOPING binding is going to be added.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4526.11.1.2.8.23.10.1.1
agentStaticDsBindingVlanId VLAN to which this DHCP SNOOPING binding is going to be added.	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.4526.11.1.2.8.23.10.1.2
agentStaticDsBindingMacAddr MAC address match value for the DHCP SNOOPING Binding.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4526.11.1.2.8.23.10.1.3
agentStaticDsBindingIpAddr IP address match value for the DHCP SNOOPING Binding.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4526.11.1.2.8.23.10.1.4
agentStaticDsBindingRowStatus The status of this conceptual row. active(1) - this DHCP SNOOPING Binding is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.11.1.2.8.23.10.1.5

A table of the DHCP SNOOPING Dynamic entries

agentDynamicDsBindingEntry row .1.3.6.1.4.1.4526.11.1.2.8.23.11.1

Represents a binding in DHCP SNOOPING table

Indexes

No indexes recorded

Column	Syntax	OID
agentDynamicDsBindingIfIndex Interface on which this DHCP SNOOPING binding is going to be added.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4526.11.1.2.8.23.11.1.1
agentDynamicDsBindingVlanId VLAN to whcig this DHCP SNOOPING binding is going to be added.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.4526.11.1.2.8.23.11.1.2
agentDynamicDsBindingMacAddr MAC address match value for the DHCP SNOOPING Binding.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4526.11.1.2.8.23.11.1.3
agentDynamicDsBindingIpAddr IP address match value for the DHCP SNOOPING Binding.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4526.11.1.2.8.23.11.1.4
agentDynamicDsBindingLeaseRemainingTime This specifies the period for which the DHCP SNOOPING Binding is valid.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.2.8.23.11.1.5

A table of the Voice Vlan device entries.

agentSwitchVoiceVlanDeviceEntry row .1.3.6.1.4.1.4526.11.1.2.8.25.2.1

Represents entry for a Voice Device on the interface.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchVoiceVlanInterfaceNum The interface number of this interface.	Integer32	.1.3.6.1.4.1.4526.11.1.2.8.25.2.1.1
agentSwitchVoiceVlanDeviceMacAddress The Voice Device Mac address	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4526.11.1.2.8.25.2.1.2

Displays Switch Database Management Template Information.

agentSdmTemplateEntry row .1.3.6.1.4.1.4526.11.1.2.8.28.1.1

Information about a SDM Template table entry.

Indexes

No indexes recorded

Column	Syntax	OID
agentSdmTemplateId The SDM Template type this instance is associated with.	Enumeration	.1.3.6.1.4.1.4526.11.1.2.8.28.1.1.1
agentArpEntries The maximum number of entries in the IPv4 Address Resolution Protocol (ARP) cache for routing interfaces.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.11.1.2.8.28.1.1.2
agentIPv4UnicastRoutes The maximum number of IPv4 unicast forwarding table entries.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.11.1.2.8.28.1.1.3
agentIPv6NdpEntries The maximum number of IPv6 Neighbor Discovery Protocol (NDP) cache entries.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.11.1.2.8.28.1.1.4
agentIPv6UnicastRoutes The maximum number of IPv6 unicast forwarding table entries.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.11.1.2.8.28.1.1.5
agentEcmpNextHops The maximum number of Equal cost next hops that can be installed in the IPv4 and IPv6 unicast forwarding tables.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.11.1.2.8.28.1.1.6
agentIPv4MulticastRoutes The maximum number of IPv4 multicast forwarding table entries.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.11.1.2.8.28.1.1.7
agentIPv6MulticastRoutes The maximum number of IPv6 multicast forwarding table entries.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.11.1.2.8.28.1.1.8

A table provides the mechanism to control DHCPv6 SNOOPING
per VLAN. When a VLAN is created in a device
supporting this table, a corresponding entry of this table
will be added.

agentDhcpv6SnoopingVlanConfigEntry row .1.3.6.1.4.1.4526.11.1.2.8.33.3.1

A row instance contains the configuration for dhcpv6
SNOOPING at each existing VLAN.

Indexes

No indexes recorded

Column	Syntax	OID
agentDhcpv6SnoopingVlanIndex This object indicates the VLAN number on which DHCPv6 SNOOPING Inspection feature is configured.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.4526.11.1.2.8.33.3.1.1
agentDhcpv6SnoopingVlanEnable This object indicates whether DHCPv6 SNOOPING is enabled in this VLAN. If this object is set to 'true', DHCPv6 SNOOPING is enabled. If this object is set to 'false', DHCPv6 SNOOPING is disa…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4526.11.1.2.8.33.3.1.2

A table provides the mechanism to configure the trust
state for DHCPv6 SNOOPING purpose at each physical
interface capable of this feature.

agentDhcpv6SnoopingIfConfigEntry row .1.3.6.1.4.1.4526.11.1.2.8.33.4.1

A row instance contains the configuration for
DHCPv6 SNOOPING at each physical interface capable of this feature.

Indexes

No indexes recorded

Column	Syntax	OID
agentDhcpv6SnoopingIfTrustEnable This object indicates whether the interface is trusted for DHCPv6 SNOOPING purpose.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4526.11.1.2.8.33.4.1.1
agentDhcpv6SnoopingIfLogEnable This object indicates whether the Logging needs on DHCPv6 SNOOPING validations or not	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4526.11.1.2.8.33.4.1.2
agentDhcpv6SnoopingIfRateLimit This object indicates rate limit value for dhcpv6 Snooping purpose. If the incoming rate of dhcpv6 packets exceeds the value of this object for consecutively burst interval seconds, dhcpv6 packets will be dropped. Value…	packets per secondInteger32r/w	.1.3.6.1.4.1.4526.11.1.2.8.33.4.1.3
agentDhcpv6SnoopingIfBurstInterval This object indicates the burst interval value for rate limiting purpose on this interface. Value of -1 indicates that there is no burst interval.	Integer32r/w	.1.3.6.1.4.1.4526.11.1.2.8.33.4.1.4

A table provides the mechanism for statics of DHCPv6 SNOOPING.

agentDhcpv6SnoopingStatsEntry row .1.3.6.1.4.1.4526.11.1.2.8.33.7.1

A row instance contains the DHCPv6 SNOOPING statistics per VLAN.

Indexes

No indexes recorded

Column	Syntax	OID
agentDhcpv6SnoopingMacVerifyFailures This object indicates the number of failure verifications of client mac address with source mac address	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.2.8.33.7.1.1
agentDhcpv6SnoopingInvalidClientMessages This object indicates the number of invalid dhcpv6 release, request and decline messages	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.2.8.33.7.1.2
agentDhcpv6SnoopingInvalidServerMessages This object indicates the number of invalid dhcpv6 server mesaages	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.2.8.33.7.1.3

A table of the DHCPv6 SNOOPING static entries

agentStaticDsv6BindingEntry row .1.3.6.1.4.1.4526.11.1.2.8.33.10.1

Represents a static binding in DHCPv6 SNOOPING table

Indexes

No indexes recorded

Column	Syntax	OID
agentStaticDsv6BindingIfIndex Interface on which this static DHCPv6 SNOOPING binding is going to be added.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4526.11.1.2.8.33.10.1.1
agentStaticDsv6BindingVlanId VLAN to which this static DHCPv6 SNOOPING binding is going to be added.	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.4526.11.1.2.8.33.10.1.2
agentStaticDsv6BindingMacAddr MAC address match value for the static DHCPv6 SNOOPING Binding.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4526.11.1.2.8.33.10.1.3
agentStaticDsv6BindingIpAddr IP address match value for the static DHCPv6 SNOOPING Binding.	Ipv6Addressr/w Type Constraints: range: 16	.1.3.6.1.4.1.4526.11.1.2.8.33.10.1.4
agentStaticDsv6BindingRowStatus The status of this conceptual row. active(1) - this static DHCPv6 SNOOPING Binding is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an i…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.11.1.2.8.33.10.1.5

A table of the DHCPv6 SNOOPING Dynamic entries

agentDynamicDsv6BindingEntry row .1.3.6.1.4.1.4526.11.1.2.8.33.11.1

Represents a dynamic binding in DHCPv6 SNOOPING table

Indexes

No indexes recorded

Column	Syntax	OID
agentDynamicDsv6BindingIfIndex Interface on which this dynamic DHCPv6 SNOOPING binding is going to be added.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4526.11.1.2.8.33.11.1.1
agentDynamicDsv6BindingVlanId VLAN to which this dynamic DHCPv6 SNOOPING binding is going to be added.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.4526.11.1.2.8.33.11.1.2
agentDynamicDsv6BindingMacAddr MAC address match value for the dynamic DHCPv6 SNOOPING Binding.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4526.11.1.2.8.33.11.1.3
agentDynamicDsv6BindingIpAddr IP address match value for the dynamic DHCPv6 SNOOPING Binding.	Ipv6Address Type Constraints: range: 16	.1.3.6.1.4.1.4526.11.1.2.8.33.11.1.4
agentDynamicDsv6BindingLeaseRemainingTime This specifies the period for which the dynamic DHCPv6 SNOOPING Binding is valid.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.2.8.33.11.1.5

The (conceptual) table listing the IP multicast Source Specific Multicast
Groups for which there are members on a particular interface and VLAN.

agentSwitchSnoopSSMGroupEntry row .1.3.6.1.4.1.4526.11.1.2.8.34.1

An entry (conceptual row) in the agentSwitchSnoopSSMGroupTable.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchSnoopSSMGroupAddressType The address type of the agentSwitchSnoopSSMGroupTable entry. This value applies to both the agentSwitchSnoopSSMGroupAddress and the agentSwitchSnoopSSMGroupLastReporter entries.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.4526.11.1.2.8.34.1.1
agentSwitchSnoopSSMGroupAddress The IP multicast group address for which this entry contains information. The InetAddressType, e.g. IPv4 or IPv6, is identified by the agentSwitchSnoopSSMGroupAddressType variable in the agentSwitchSnoopSSMGroup table.	OctetString	.1.3.6.1.4.1.4526.11.1.2.8.34.1.2
agentSwitchSnoopSSMGroupIfIndex The interface for which this entry contains information for an IP multicast group address.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4526.11.1.2.8.34.1.3
agentSwitchSnoopSSMGroupVlanId The VLAN for which this entry contains information for an IP multicast group address.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.4526.11.1.2.8.34.1.4
agentSwitchSnoopSSMGroupLastReporter The IP address of the source of the last membership report received for this IP Multicast group address on this interface and VLAN. The InetAddressType, e.g. IPv4 or IPv6, is identified by the agentSwitchSnoopSSMGroupAd…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.4526.11.1.2.8.34.1.5
agentSwitchSnoopSSMGroupSourceFilterMode The state in which the interface is currently set. The value indicates the relevance of the corresponding source list entries in the SrcList Table (agentSwitchSnoopSSMSrcListTable).	Enumeration	.1.3.6.1.4.1.4526.11.1.2.8.34.1.6

The (conceptual) table listing the Source List entries
corresponding to each VLAN, interface and SSM multicast group pair on
a MGMD Snooping switch.

agentSwitchSnoopSSMSrcListEntry row .1.3.6.1.4.1.4526.11.1.2.8.35.1

An entry (conceptual row) in the agentSwitchSnoopSSMSrcListTable.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchSnoopSSMSrcListAddressType The address type of the InetAddress variables in this table. This value applies to the agentSwitchSnoopSSMSrcListHostAddress and agentSwitchSnoopSSMSrcListAddress entries.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.4526.11.1.2.8.35.1.1
agentSwitchSnoopSSMSrcListAddress The IP multicast group address for which this entry contains information.	OctetString	.1.3.6.1.4.1.4526.11.1.2.8.35.1.2
agentSwitchSnoopSSMSrcListIfIndex The interface for which this entry contains information for an IP multicast group address.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4526.11.1.2.8.35.1.3
agentSwitchSnoopSSMSrcListVlanId The VLAN for which this entry contains information for an IP multicast group address.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.4526.11.1.2.8.35.1.4
agentSwitchSnoopSSMSrcListHostAddress The host address to which this entry corresponds. The agentSwitchSnoopSSMGroupSourceFilterMode value for this Group address, interface and VLAN indicates whether this Host address is included or excluded.	OctetString	.1.3.6.1.4.1.4526.11.1.2.8.35.1.5

MGMD Snooping Source Specific Multicast
Forwarding database Table.

agentSwitchSnoopSSMFDBEntry row .1.3.6.1.4.1.4526.11.1.2.8.36.1

An entry is created by IGMP Snooping for each group learned in the VLAN.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchSnoopSSMFDBVlanIndex This object indicates the VLAN in which the group is learned.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.4526.11.1.2.8.36.1.1
agentSwitchSnoopSSMFDBGroupAddressType This object indicates IP multicast address type learned by MGMD Snooping.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.4526.11.1.2.8.36.1.2
agentSwitchSnoopSSMFDBGroupAddress This object indicates IP multicast address learned by MGMD Snooping.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.4526.11.1.2.8.36.1.3
agentSwitchSnoopSSMFDBSourceAddress This object indicates IP Source address learned by MGMD Snooping.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.4526.11.1.2.8.36.1.4
agentSwitchSnoopSSMFDBIncludePortList This object indicates the set of ports on which MGMD Membership Reports are received for the group indicating interest to receive traffic sent to the group.	NG700-REF-MIBAgentPortMask	.1.3.6.1.4.1.4526.11.1.2.8.36.1.5
agentSwitchSnoopSSMFDBExcludePortList This object indicates the set of ports on which MGMD Membership Reports are received for the group indicating interest to not to receive traffic sent to the group.	NG700-REF-MIBAgentPortMask	.1.3.6.1.4.1.4526.11.1.2.8.36.1.6

This table includes entries for each Port Mirroring session.

agentPortMirrorEntry row .1.3.6.1.4.1.4526.11.1.2.10.4.1

Provides configuration of a Port Mirroring session specifying the
destination port, and the source Port Mask, providing a many-to-one
mapping.

Indexes

No indexes recorded

Column	Syntax	OID
agentPortMirrorSessionNum The Session number of this mirroring entry. The number of sessions is fixed, and is platform dependant.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.2.10.4.1.1
agentPortMirrorDestinationPort The port which traffic from the mirrored ports will be sent to.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.2.10.4.1.2
agentPortMirrorSourcePortMask The ports from which traffic will be sent to the destination port. The destination port can not be included in this list of ports.	NG700-REF-MIBAgentPortMaskr/w	.1.3.6.1.4.1.4526.11.1.2.10.4.1.3
agentPortMirrorAdminMode The status of this port mirroring session. enable(1) - This session is active and all traffic from the source ports will be mirrored to the destination port. disable(2) - This session is not…	Enumerationr/w	.1.3.6.1.4.1.4526.11.1.2.10.4.1.4
agentPortMirrorSourceVlan The vlan from which traffic will be sent to the destination port.	Unsigned32r/w	.1.3.6.1.4.1.4526.11.1.2.10.4.1.5
agentPortMirrorRemoteSourceVlan The remote vlan from which traffic will be sent to the destination port.	Unsigned32r/w	.1.3.6.1.4.1.4526.11.1.2.10.4.1.6
agentPortMirrorRemoteDestinationVlan The VLAN that forwards the network traffic to the destination switch.	Unsigned32r/w	.1.3.6.1.4.1.4526.11.1.2.10.4.1.7
agentPortMirrorReflectorPort The port which traffic from the mirrored ports will be sent to in case of destination being remote VLAN.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.2.10.4.1.8
agentPortMirrorIpAccessListNumber The IP access-list number attached to the port mirroring session.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.2.10.4.1.10
agentPortMirrorMacAccessListNumber The MAC access-list number attached to the port mirroring session.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.2.10.4.1.11

This table includes entries for each source port's direction of port mirroring.

agentPortMirrorTypeEntry row .1.3.6.1.4.1.4526.11.1.2.10.5.1

Provides configuration of a Port Mirroring direction specifying the
session of the port mirroring and source port

Indexes

No indexes recorded

Column	Syntax	OID
agentPortMirrorTypeSourcePort The port from which traffic will be sent to the destination port. This port should be a source port in the corresponding session	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.11.1.2.10.5.1.1
agentPortMirrorTypeType The direction of the data to be mirrored on this source port. tx(1) - The data that is transmitted from the source port. rx(2) - The data that is received on the source port. txrx(3) - The data that is …	Enumerationr/w	.1.3.6.1.4.1.4526.11.1.2.10.5.1.2