agentStpCstPortBpduFlood

NG700-SWITCHING-MIB · .1.3.6.1.4.1.4526.11.1.2.15.9.1.15

MIB view Table view

Object

column r/w Enumeration

This command sets BPDU Flood mode on the port.
              
enable(1)  - BPDU Flood Mode is enabled on the port.
disable(2) - BPDU Flood Mode is disabled on the port.

Context

MIB: NG700-SWITCHING-MIB
OID: .1.3.6.1.4.1.4526.11.1.2.15.9.1.15
Type: column
Access: readwrite
Status: current
Parent: agentStpCstPortEntry
Table: agentStpCstPortTable
Siblings: 18

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
agentStpCstPortOperEdge The MSTP operational status of a specific port for the CIST.	column	Enumeration	`.1.3.6.1.4.1.4526.11.1.2.15.9.1.1`
agentStpCstDesignatedCost The MSTP designated cost of a specific port in CIST.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.4526.11.1.2.15.9.1.10`
agentStpCstDesignatedPortId The MSTP designated port ID of a specific port in CIST.	column	PortId	`.1.3.6.1.4.1.4526.11.1.2.15.9.1.11`
agentStpCstExtPortPathCost The MSTP external port path cost in CIST. The default value varies depending upon the link speed.	column	Unsigned32	`.1.3.6.1.4.1.4526.11.1.2.15.9.1.12`
agentStpCstPortBpduGuardEffect BPDU Guard Mode effect on the port. enable(1) - BPDU Guard Mode is enabled on the port. disable(2) - BPDU Guard Mode is disabled on the port.	column	Enumeration	`.1.3.6.1.4.1.4526.11.1.2.15.9.1.13`
agentStpCstPortBpduFilter This command sets BPDU Filter mode on the port. enable(1) - BPDU Filter Mode is enabled on the port. disable(2) - BPDU Filter Mode is disabled on the port.	column	Enumeration	`.1.3.6.1.4.1.4526.11.1.2.15.9.1.14`
agentStpCstPortAutoEdge This command sets the auto-edge mode of the port which enables it to become an edge port if it does not see BPDUs for some duration. enable(1) - enables the auto-e…	column	Enumeration	`.1.3.6.1.4.1.4526.11.1.2.15.9.1.16`
agentStpCstPortRootGuard This command sets a port to discard any superior information received by the port and thus protect against root of the device from changing.The port gets put into discarding state…	column	Enumeration	`.1.3.6.1.4.1.4526.11.1.2.15.9.1.17`
agentStpCstPortTCNGuard This command restricts the port from propagating any topology change information received through that port. enable(1) - enables the tcn-guard mode for the port. d…	column	Enumeration	`.1.3.6.1.4.1.4526.11.1.2.15.9.1.18`
agentStpCstPortLoopGuard This command enables loop guard on this port. This setting applies to all Spanning Tree instances of which this port is a member. enable(1) - enables the loop guar…	column	Enumeration	`.1.3.6.1.4.1.4526.11.1.2.15.9.1.19`
agentStpCstPortOperPointToPoint The MSTP operational point to point mac of a specific port for the CIST.	column	Enumeration	`.1.3.6.1.4.1.4526.11.1.2.15.9.1.2`
agentStpCstPortTopologyChangeAck The MSTP topology change acknowledge for a specific port in the CIST.	column	Enumeration	`.1.3.6.1.4.1.4526.11.1.2.15.9.1.3`
agentStpCstPortEdge The administrative state of a specific port in CIST. enable(1) - enables the port. disable(2) - disables the port. The default port state is disable…	column	Enumeration	`.1.3.6.1.4.1.4526.11.1.2.15.9.1.4`
agentStpCstPortForwardingState The MSTP forwarding state of a specific port in CIST.	column	Enumeration	`.1.3.6.1.4.1.4526.11.1.2.15.9.1.5`
agentStpCstPortId The MSTP port identifier of a specific port in CIST.	column	PortId	`.1.3.6.1.4.1.4526.11.1.2.15.9.1.6`
agentStpCstPortPathCost The MSTP port path cost in CIST. The default value will correspond to the recommendation specified in IEEE 802.1s Table 13-2 which varies depending upon link speed.	column	Unsigned32	`.1.3.6.1.4.1.4526.11.1.2.15.9.1.7`
agentStpCstPortPriority The MSTP port priority in CIST. The priority is in the increments of 16. The default value is 128.	column	Unsigned32	`.1.3.6.1.4.1.4526.11.1.2.15.9.1.8`
agentStpCstDesignatedBridgeId The MSTP designated bridge ID of a specific port in CIST.	column	OctetString	`.1.3.6.1.4.1.4526.11.1.2.15.9.1.9`