agentPortMulticastControlMode

NG700-SWITCHING-MIB · .1.3.6.1.4.1.4526.11.1.2.13.1.22
MIB view Table view

Object

column r/w Enumeration 
If enabled, multicast storm recovery will function on this port.
When you specify Enable for Multicast Storm Recovery and the multicast
traffic on this Ethernet port exceeds the configured threshold, the
switch blocks (discards) the multicast traffic.

Context

MIB
NG700-SWITCHING-MIB
OID
.1.3.6.1.4.1.4526.11.1.2.13.1.22
Type
column
Access
readwrite
Status
current
Parent
agentPortConfigEntry
Table
agentPortConfigTable
Siblings
35

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
agentPortDot1dBasePort
The port number of this port.
columnInteger32.1.3.6.1.4.1.4526.11.1.2.13.1.1
agentPortClearStats
clear stats for this port only
columnEnumeration.1.3.6.1.4.1.4526.11.1.2.13.1.10
agentPortDefaultType
This object identifies the default administrative port type, to be used in conjunction with the operational port type denoted by agentPortType. This object represen…
columnObjectIdentifier.1.3.6.1.4.1.4526.11.1.2.13.1.11
agentPortType
This object identifies the port type. An initial set of MAU types are defined in RFC 2668. The assignment of OBJECT IDENTIFIERs to new types of MAUs is managed by the IANA. If …
columnObjectIdentifier.1.3.6.1.4.1.4526.11.1.2.13.1.12
agentPortAutoNegAdminStatus
This object identifies the administration status of auto negotiation for this port.
columnEnumeration.1.3.6.1.4.1.4526.11.1.2.13.1.13
agentPortDot3FlowControlMode
Config flowcontrol allows you to enable or disable 802.3x flow control for this port. This value applies to only full-duplex mode ports. Enabling symmetric flow control allows the…
columnEnumeration.1.3.6.1.4.1.4526.11.1.2.13.1.14
agentPortMaxFrameSizeLimit
This object identifies the largest value that can be configured for agentPortMaxFrameSize
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4526.11.1.2.13.1.18
agentPortMaxFrameSize
This object identifies the currently configured maximum frame size value for this port. The maximmum value that this object can be set to is the value of agentPortMaxFrameSizeLimi…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4526.11.1.2.13.1.19
agentPortIfIndex
The switch's Port IfIndex
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4526.11.1.2.13.1.2
agentPortBroadcastControlMode
If enabled, broadcast storm recovery will function on this port. When you specify Enable for Broadcast Storm Recovery and the broadcast traffic on this Ethernet port exceeds the c…
columnEnumeration.1.3.6.1.4.1.4526.11.1.2.13.1.20
agentPortBroadcastControlThreshold
Configures the broadcast storm recovery threshold for this port as a percentage of port speed or as an absolute pps rate.
columnInteger32.1.3.6.1.4.1.4526.11.1.2.13.1.21
agentPortMulticastControlThreshold
Configures the multicast storm recovery threshold for this port as a percentage of port speed or as an absolute pps rate.
columnInteger32.1.3.6.1.4.1.4526.11.1.2.13.1.23
agentPortUnicastControlMode
If enabled, unicast storm recovery will function on this port. When you specify Enable for Unicast Storm Recovery and the unknown unicast traffic on this Ethernet port exceeds the…
columnEnumeration.1.3.6.1.4.1.4526.11.1.2.13.1.24
agentPortUnicastControlThreshold
Configures the unicast storm recovery threshold for this port as a percentage of port speed or as an absolute pps rate.
columnInteger32.1.3.6.1.4.1.4526.11.1.2.13.1.25
agentPortBroadcastControlThresholdUnit
Configures the units of the threshold value to percentage of port speed or absolute packets per second.
columnEnumeration.1.3.6.1.4.1.4526.11.1.2.13.1.26
agentPortMulticastControlThresholdUnit
Configures the units of the threshold value to percentage of port speed or absolute packets per second.
columnEnumeration.1.3.6.1.4.1.4526.11.1.2.13.1.27
agentPortUnicastControlThresholdUnit
Configures the units of the threshold value to percentage of port speed or absolute packets per second.
columnEnumeration.1.3.6.1.4.1.4526.11.1.2.13.1.28
agentPortVoiceVlanMode
Describes and Configures the Port Voice VLAN Mode. This object can only be set to disable(5).
columnEnumeration.1.3.6.1.4.1.4526.11.1.2.13.1.29
agentPortIanaType
The switch's Port Type
columnIANAifType-MIBIANAifType.1.3.6.1.4.1.4526.11.1.2.13.1.3
agentPortVoiceVlanID
Describes and Configures the Port Voice VLAN ID if the Voice Vlan Mode is Vlan ID.
columnInteger32.1.3.6.1.4.1.4526.11.1.2.13.1.30
agentPortVoiceVlanPriority
Describes and Configures the Port Voice VLAN Priority if the Voice Vlan Mode is dot1p. A value of 255 indicates that the priority is not configured.
columnInteger32.1.3.6.1.4.1.4526.11.1.2.13.1.31
agentPortVoiceVlanDataPriorityMode
Describes and Configures the Port Voice VLAN Data Priority Mode.
columnEnumeration.1.3.6.1.4.1.4526.11.1.2.13.1.32
agentPortVoiceVlanOperationalStatus
Describes the Port Voice VLAN Operational Status.
columnEnumeration.1.3.6.1.4.1.4526.11.1.2.13.1.33
agentPortVoiceVlanUntagged
Describes and Configures the Port Voice VLAN tagging mode.
columnEnumeration.1.3.6.1.4.1.4526.11.1.2.13.1.34
agentPortVoiceVlanNoneMode
Describes and Configures the Port Voice VLAN None mode.
columnEnumeration.1.3.6.1.4.1.4526.11.1.2.13.1.35
agentPortVoiceVlanDSCP
Describes and Configures the Port Voice VLAN DSCP value.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4526.11.1.2.13.1.36
agentPortVoiceVlanAuthMode
Describes and Configures the Port Voice VLAN Authentication mode. Disable means authentication not required for voice devices when dot1x is enabled.
columnEnumeration.1.3.6.1.4.1.4526.11.1.2.13.1.37
agentPortDot3FlowControlOperStatus
This object identifies operational status of the flow control per port.
columnEnumeration.1.3.6.1.4.1.4526.11.1.2.13.1.38
agentPortSTPMode obsolete
The switch's Port Spanning Tree Protocol Mode STP mode values are: dot1d (the default) fast, indicates you want to use the fast spanning tree mode off, indicates th…
columnEnumeration.1.3.6.1.4.1.4526.11.1.2.13.1.4
agentPortSwitchportModecolumnEnumeration.1.3.6.1.4.1.4526.11.1.2.13.1.45
agentPortSTPState obsolete
The switch's Port Spanning Tree Protocol State. This object is only supported when the Dot1d Protocol is enabled.
columnEnumeration.1.3.6.1.4.1.4526.11.1.2.13.1.5
agentPortAdminMode
The switch's Port Admin Mode
columnEnumeration.1.3.6.1.4.1.4526.11.1.2.13.1.6
agentPortPhysicalMode obsolete
The switch's Port Speed Mode. This is the configured physical mode. This object is read-only for gigabit ports
columnEnumeration.1.3.6.1.4.1.4526.11.1.2.13.1.7
agentPortPhysicalStatus obsolete
The switch's Port Physical Speed Status. This is the current actual speed.
columnEnumeration.1.3.6.1.4.1.4526.11.1.2.13.1.8
agentPortLinkTrapMode
If enabled, link up and link down traps will be sent for this port.
columnEnumeration.1.3.6.1.4.1.4526.11.1.2.13.1.9