agentStpCstPortLoopGuard
NG700-SWITCHING-MIB ·
.1.3.6.1.4.1.4526.11.1.2.15.9.1.19
Object
column
r/w
Enumeration
This command enables loop guard on this port. This setting applies
to all Spanning Tree instances of which this port is a member.
enable(1) - enables the loop guard mode for the port.
disable(2) - disables the loop guard mode for the port.
The default loop-guard mode is disabled.
Context
- MIB
- NG700-SWITCHING-MIB
- OID
.1.3.6.1.4.1.4526.11.1.2.15.9.1.19- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- agentStpCstPortEntry
- Table
- agentStpCstPortTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agentStpCstPortOperEdge The MSTP operational status of a specific port for the CIST. | column | Enumeration | .1.3.6.1.4.1.4526.11.1.2.15.9.1.1 |
| agentStpCstDesignatedCost The MSTP designated cost of a specific port in CIST. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4526.11.1.2.15.9.1.10 |
| agentStpCstDesignatedPortId The MSTP designated port ID of a specific port in CIST. | column | PortId | .1.3.6.1.4.1.4526.11.1.2.15.9.1.11 |
| agentStpCstExtPortPathCost The MSTP external port path cost in CIST. The default value varies depending upon the link speed. | column | Unsigned32 | .1.3.6.1.4.1.4526.11.1.2.15.9.1.12 |
| agentStpCstPortBpduGuardEffect BPDU Guard Mode effect on the port.
enable(1) - BPDU Guard Mode is enabled on the port.
disable(2) - BPDU Guard Mode is disabled on the port. | column | Enumeration | .1.3.6.1.4.1.4526.11.1.2.15.9.1.13 |
| agentStpCstPortBpduFilter This command sets BPDU Filter mode on the port.
enable(1) - BPDU Filter Mode is enabled on the port.
disable(2) - BPDU Filter Mode is disabled on the port. | column | Enumeration | .1.3.6.1.4.1.4526.11.1.2.15.9.1.14 |
| agentStpCstPortBpduFlood This command sets BPDU Flood mode on the port.
enable(1) - BPDU Flood Mode is enabled on the port.
disable(2) - BPDU Flood Mode is disabled on the port. | column | Enumeration | .1.3.6.1.4.1.4526.11.1.2.15.9.1.15 |
| agentStpCstPortAutoEdge This command sets the auto-edge mode of the port which enables it
to become an edge port if it does not see BPDUs for some duration.
enable(1) - enables the auto-e… | column | Enumeration | .1.3.6.1.4.1.4526.11.1.2.15.9.1.16 |
| agentStpCstPortRootGuard This command sets a port to discard any superior information
received by the port and thus protect against root of the device
from changing.The port gets put into discarding state… | column | Enumeration | .1.3.6.1.4.1.4526.11.1.2.15.9.1.17 |
| agentStpCstPortTCNGuard This command restricts the port from propagating any topology change
information received through that port.
enable(1) - enables the tcn-guard mode for the port.
d… | column | Enumeration | .1.3.6.1.4.1.4526.11.1.2.15.9.1.18 |
| agentStpCstPortOperPointToPoint The MSTP operational point to point mac of a specific port for the CIST. | column | Enumeration | .1.3.6.1.4.1.4526.11.1.2.15.9.1.2 |
| agentStpCstPortTopologyChangeAck The MSTP topology change acknowledge for a specific port in the CIST. | column | Enumeration | .1.3.6.1.4.1.4526.11.1.2.15.9.1.3 |
| agentStpCstPortEdge The administrative state of a specific port in CIST.
enable(1) - enables the port.
disable(2) - disables the port.
The default port state is disable… | column | Enumeration | .1.3.6.1.4.1.4526.11.1.2.15.9.1.4 |
| agentStpCstPortForwardingState The MSTP forwarding state of a specific port in CIST. | column | Enumeration | .1.3.6.1.4.1.4526.11.1.2.15.9.1.5 |
| agentStpCstPortId The MSTP port identifier of a specific port in CIST. | column | PortId | .1.3.6.1.4.1.4526.11.1.2.15.9.1.6 |
| agentStpCstPortPathCost The MSTP port path cost in CIST. The default value will
correspond to the recommendation specified in IEEE 802.1s Table 13-2
which varies depending upon link speed. | column | Unsigned32 | .1.3.6.1.4.1.4526.11.1.2.15.9.1.7 |
| agentStpCstPortPriority The MSTP port priority in CIST. The priority is
in the increments of 16. The default value is 128. | column | Unsigned32 | .1.3.6.1.4.1.4526.11.1.2.15.9.1.8 |
| agentStpCstDesignatedBridgeId The MSTP designated bridge ID of a specific port in CIST. | column | OctetString | .1.3.6.1.4.1.4526.11.1.2.15.9.1.9 |