agentStpCstPortRootGuard
NG700-SWITCHING-MIB ·
.1.3.6.1.4.1.4526.11.1.2.15.9.1.17
Object
column
r/w
Enumeration
This command sets a port to discard any superior information
received by the port and thus protect against root of the device
from changing.The port gets put into discarding state and does
not forward any packets.
enable(1) - enables the root-guard mode for the port.
disable(2) - disables the root-guard mode for the port.
The default root-guard mode is disabled.
Context
- MIB
- NG700-SWITCHING-MIB
- OID
.1.3.6.1.4.1.4526.11.1.2.15.9.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- agentStpCstPortEntry
- Table
- agentStpCstPortTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agentStpCstPortOperEdge The MSTP operational status of a specific port for the CIST. | column | Enumeration | .1.3.6.1.4.1.4526.11.1.2.15.9.1.1 |
| agentStpCstDesignatedCost The MSTP designated cost of a specific port in CIST. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4526.11.1.2.15.9.1.10 |
| agentStpCstDesignatedPortId The MSTP designated port ID of a specific port in CIST. | column | PortId | .1.3.6.1.4.1.4526.11.1.2.15.9.1.11 |
| agentStpCstExtPortPathCost The MSTP external port path cost in CIST. The default value varies depending upon the link speed. | column | Unsigned32 | .1.3.6.1.4.1.4526.11.1.2.15.9.1.12 |
| agentStpCstPortBpduGuardEffect BPDU Guard Mode effect on the port.
enable(1) - BPDU Guard Mode is enabled on the port.
disable(2) - BPDU Guard Mode is disabled on the port. | column | Enumeration | .1.3.6.1.4.1.4526.11.1.2.15.9.1.13 |
| agentStpCstPortBpduFilter This command sets BPDU Filter mode on the port.
enable(1) - BPDU Filter Mode is enabled on the port.
disable(2) - BPDU Filter Mode is disabled on the port. | column | Enumeration | .1.3.6.1.4.1.4526.11.1.2.15.9.1.14 |
| agentStpCstPortBpduFlood This command sets BPDU Flood mode on the port.
enable(1) - BPDU Flood Mode is enabled on the port.
disable(2) - BPDU Flood Mode is disabled on the port. | column | Enumeration | .1.3.6.1.4.1.4526.11.1.2.15.9.1.15 |
| agentStpCstPortAutoEdge This command sets the auto-edge mode of the port which enables it
to become an edge port if it does not see BPDUs for some duration.
enable(1) - enables the auto-e… | column | Enumeration | .1.3.6.1.4.1.4526.11.1.2.15.9.1.16 |
| agentStpCstPortTCNGuard This command restricts the port from propagating any topology change
information received through that port.
enable(1) - enables the tcn-guard mode for the port.
d… | column | Enumeration | .1.3.6.1.4.1.4526.11.1.2.15.9.1.18 |
| agentStpCstPortLoopGuard This command enables loop guard on this port. This setting applies
to all Spanning Tree instances of which this port is a member.
enable(1) - enables the loop guar… | column | Enumeration | .1.3.6.1.4.1.4526.11.1.2.15.9.1.19 |
| agentStpCstPortOperPointToPoint The MSTP operational point to point mac of a specific port for the CIST. | column | Enumeration | .1.3.6.1.4.1.4526.11.1.2.15.9.1.2 |
| agentStpCstPortTopologyChangeAck The MSTP topology change acknowledge for a specific port in the CIST. | column | Enumeration | .1.3.6.1.4.1.4526.11.1.2.15.9.1.3 |
| agentStpCstPortEdge The administrative state of a specific port in CIST.
enable(1) - enables the port.
disable(2) - disables the port.
The default port state is disable… | column | Enumeration | .1.3.6.1.4.1.4526.11.1.2.15.9.1.4 |
| agentStpCstPortForwardingState The MSTP forwarding state of a specific port in CIST. | column | Enumeration | .1.3.6.1.4.1.4526.11.1.2.15.9.1.5 |
| agentStpCstPortId The MSTP port identifier of a specific port in CIST. | column | PortId | .1.3.6.1.4.1.4526.11.1.2.15.9.1.6 |
| agentStpCstPortPathCost The MSTP port path cost in CIST. The default value will
correspond to the recommendation specified in IEEE 802.1s Table 13-2
which varies depending upon link speed. | column | Unsigned32 | .1.3.6.1.4.1.4526.11.1.2.15.9.1.7 |
| agentStpCstPortPriority The MSTP port priority in CIST. The priority is
in the increments of 16. The default value is 128. | column | Unsigned32 | .1.3.6.1.4.1.4526.11.1.2.15.9.1.8 |
| agentStpCstDesignatedBridgeId The MSTP designated bridge ID of a specific port in CIST. | column | OctetString | .1.3.6.1.4.1.4526.11.1.2.15.9.1.9 |