MPLS-LDP-FRAME-RELAY-STD-MIB Table View

This table contains Frame Relay specific
information which could be used in the
'Optional Parameters' and other Frame Relay
specific information.
          
This table 'sparse augments' the mplsLdpEntityTable
when Frame Relay is the Layer 2 medium.

mplsLdpEntityFrameRelayEntry row .1.3.6.1.2.1.10.166.6.1.1.1.1

An entry in this table represents the Frame Relay
optional parameters associated with the LDP entity.

Indexes

MPLS-LDP-STD-MIBmplsLdpEntityLdpId MPLS-LDP-STD-MIBmplsLdpEntityIndex

Column	Syntax	OID
mplsLdpEntityFrameRelayIfIndexOrZero This value represents either the InterfaceIndex of the 'ifLayer' where the Frame Relay Labels 'owned' by this entry were created, or 0 (zero). The value of zero means that the InterfaceIndex is not known. For example,…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.2.1.10.166.6.1.1.1.1.1
mplsLdpEntityFrameRelayMergeCap This represents whether or not the Frame Relay merge capability is supported. This is the EXACT value for the Frame Relay Session Parameter, field M (for Frame Relay Merge Capabilities). The Frame Relay Session Parame…	Enumerationr/w Enumerated Values: 0 notSupported 1 supported	.1.3.6.1.2.1.10.166.6.1.1.1.1.2
mplsLdpEntityFrameRelayLRComponents Number of Label Range Components in the Initialization message. This also represents the number of entries in the mplsLdpEntityFrameRelayLRTable which correspond to this entry. This is the EXACT value fo…	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.2.1.10.166.6.1.1.1.1.3
mplsLdpEntityFrameRelayVcDirectionality If the value of this object is 'bidirectional(0)', then the LSR supports the use of a given DLCI as a label for both directions independently. If the value of this object is 'unidirectional(1)', then the LSR uses the g…	Enumerationr/w Enumerated Values: 0 bidirectional 1 unidirection	.1.3.6.1.2.1.10.166.6.1.1.1.1.4
mplsLdpEntityFrameRelayStorageType The storage type for this conceptual row. Conceptual rows having the value 'permanent(4)' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.10.166.6.1.1.1.1.5
mplsLdpEntityFrameRelayRowStatus The status of this conceptual row. All writable objects in this row may be modified at any time, however, as described in detail in the section entitled, 'Changing Values After Session Establishment', and again describ…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.166.6.1.1.1.1.6

This table contains information about the
          
Optional Parameters for the Frame Relay Session
in the LDP Initialization Message, specifically
it contains information about the Frame Relay
Label Range Components.
          
If the value of the object
'mplsLdpEntityOptionalParameters' contains the
value of 'frameRelaySessionParameters(3)' then
there must be at least one corresponding entry
in this table.

mplsLdpEntityFrameRelayLREntry row .1.3.6.1.2.1.10.166.6.1.1.2.1

An entry in this table represents the Frame Relay
Label Range Component associated with the LDP entity.

Indexes

MPLS-LDP-STD-MIBmplsLdpEntityLdpId MPLS-LDP-STD-MIBmplsLdpEntityIndex mplsLdpEntityFrameRelayLRMinDlci

Column	Syntax	OID
mplsLdpEntityFrameRelayLRMinDlci The lower bound which is supported. This value should be the same as that in the Frame Relay Label Range Component's Minimum DLCI field. The value of zero is valid for the minimum DLCI field of the label.	FRAME-RELAY-DTE-MIBDLCI Type Constraints: range: 0..8388607	.1.3.6.1.2.1.10.166.6.1.1.2.1.1
mplsLdpEntityFrameRelayLRMaxDlci The upper bound which is supported. This value should be the same as that in the Frame Relay Label Range Component's Maximum DLCI field.	FRAME-RELAY-DTE-MIBDLCIr/w Type Constraints: range: 0..8388607	.1.3.6.1.2.1.10.166.6.1.1.2.1.2
mplsLdpEntityFrameRelayLRLen This object specifies the length of the DLCI bits. This is the EXACT value for the Len field of the Frame Relay Label Range Component. The description from rfc3036.txt is: 'L…	Enumerationr/w Enumerated Values: 0 tenDlciBits 2 twentyThreeDlciBits	.1.3.6.1.2.1.10.166.6.1.1.2.1.3
mplsLdpEntityFrameRelayLRStorageType The storage type for this conceptual row. Conceptual rows having the value 'permanent(4)' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.10.166.6.1.1.2.1.4
mplsLdpEntityFrameRelayLRRowStatus The status of this conceptual row. All writable objects in this row may be modified at any time, however, as described in detail in the section entitled, 'Changing Values After Session Establishment', and again describ…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.166.6.1.1.2.1.5

A table of Frame Relay label range intersections
between the LDP Entities and LDP Peers.
Each row represents a single label range intersection.
          
NOTE:  this table cannot use the 'AUGMENTS'
          
clause because there is not necessarily a one-to-one
mapping between this table and the
mplsLdpSessionTable.

mplsLdpFrameRelaySessionEntry row .1.3.6.1.2.1.10.166.6.1.2.1.1

An entry in this table represents information on a
single label range intersection between an
LDP Entity and LDP Peer.

The information contained in a row is read-only.

Indexes

MPLS-LDP-STD-MIBmplsLdpEntityLdpId MPLS-LDP-STD-MIBmplsLdpEntityIndex MPLS-LDP-STD-MIBmplsLdpPeerLdpId mplsLdpFrameRelaySessionMinDlci

Column	Syntax	OID
mplsLdpFrameRelaySessionMinDlci The lower bound of DLCIs which are supported. The value of zero is a valid value for the minimum DLCI field of the label.	FRAME-RELAY-DTE-MIBDLCI Type Constraints: range: 0..8388607	.1.3.6.1.2.1.10.166.6.1.2.1.1.1
mplsLdpFrameRelaySessionMaxDlci The upper bound of DLCIs which are supported.	FRAME-RELAY-DTE-MIBDLCI Type Constraints: range: 0..8388607	.1.3.6.1.2.1.10.166.6.1.2.1.1.2
mplsLdpFrameRelaySessionLen This object specifies the DLCI bits.	Enumeration Enumerated Values: 0 tenDlciBits 2 twentyThreeDlciBits	.1.3.6.1.2.1.10.166.6.1.2.1.1.3