MPLS-LDP-FRAME-RELAY-STD-MIB

        Copyright (C) The Internet Society (year). The
initial version of this MIB module was published
in RFC 3815. For full legal notices see the RFC
itself or see:
http://www.ietf.org/copyrights/ianamib.html
        
This MIB contains managed object definitions for
configuring and monitoring the Multiprotocol Label
Switching (MPLS), Label Distribution Protocol (LDP),
utilizing Frame Relay as the Layer 2 media.
    
Source file
MPLS-LDP-FRAME-RELAY-STD-MIB
Last revised
Identity
mplsLdpFrameRelayStdMIB
Base OID
1.3.6.1.2.1.10.166.6
Imported Objects
FRAME-RELAY-DTE-MIB DLCI
IF-MIB InterfaceIndexOrZero
MPLS-LDP-STD-MIB mplsLdpEntityIndex mplsLdpEntityLdpId mplsLdpPeerLdpId
MPLS-TC-STD-MIB mplsStdMIB
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC RowStatus StorageType
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'MPLS-LDP-FRAME-RELAY-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'MPLS-LDP-FRAME-RELAY-STD-MIB::mplsLdpFrameRelayStdMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPLS-LDP-FRAME-RELAY-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPLS-LDP-FRAME-RELAY-STD-MIB::mplsLdpFrameRelayStdMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (27)
.1.3.6.1.2.1.10.166.6
.1.3.6.1.2.1.10.166.6.1
.1.3.6.1.2.1.10.166.6.1.1
.1.3.6.1.2.1.10.166.6.1.1.1
.1.3.6.1.2.1.10.166.6.1.1.1.1
.1.3.6.1.2.1.10.166.6.1.1.1.1.1
Enumeration
.1.3.6.1.2.1.10.166.6.1.1.1.1.2
Unsigned32
.1.3.6.1.2.1.10.166.6.1.1.1.1.3
Enumeration
.1.3.6.1.2.1.10.166.6.1.1.1.1.4
.1.3.6.1.2.1.10.166.6.1.1.1.1.5
.1.3.6.1.2.1.10.166.6.1.1.1.1.6
.1.3.6.1.2.1.10.166.6.1.1.2
.1.3.6.1.2.1.10.166.6.1.1.2.1
.1.3.6.1.2.1.10.166.6.1.1.2.1.1
.1.3.6.1.2.1.10.166.6.1.1.2.1.2
Enumeration
.1.3.6.1.2.1.10.166.6.1.1.2.1.3
.1.3.6.1.2.1.10.166.6.1.1.2.1.4
.1.3.6.1.2.1.10.166.6.1.1.2.1.5
.1.3.6.1.2.1.10.166.6.1.2
.1.3.6.1.2.1.10.166.6.1.2.1
.1.3.6.1.2.1.10.166.6.1.2.1.1
.1.3.6.1.2.1.10.166.6.1.2.1.1.1
.1.3.6.1.2.1.10.166.6.1.2.1.1.2
Enumeration
.1.3.6.1.2.1.10.166.6.1.2.1.1.3
.1.3.6.1.2.1.10.166.6.2
.1.3.6.1.2.1.10.166.6.2.1
.1.3.6.1.2.1.10.166.6.2.2
Dependencies (18) 7 direct · 11 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Compliance Statements (2)

OID .1.3.6.1.2.1.10.166.6.2.2.1
The Module is implemented with support for
read-create and read-write. In other words,
both monitoring and configuration
are available when using this MODULE-COMPLIANCE.
Required groups
Object refinements
ObjectAccessSyntaxDescription
mplsLdpEntityFrameRelayRowStatus
active(1)
Support for createAndWait and notInService is not required.
mplsLdpEntityFrameRelayLRRowStatus
active(1)
Support for createAndWait and notInService is not required.

OID .1.3.6.1.2.1.10.166.6.2.2.2
The Module is implemented with support for
read-only. In other words, only monitoring
is available by implementing this MODULE-COMPLIANCE.
Required groups
Object refinements
ObjectAccessSyntaxDescription
mplsLdpEntityFrameRelayIfIndexOrZero readonly
Write access is not required.
mplsLdpEntityFrameRelayMergeCap readonly
Write access is not required.
mplsLdpEntityFrameRelayVcDirectionality readonly
Write access is not required.
mplsLdpEntityFrameRelayStorageType readonly
Write access is not required.
mplsLdpEntityFrameRelayRowStatus readonly
active(1)
Write access is not required, and active is the
only status that needs to be supported.
mplsLdpEntityFrameRelayLRMaxDlci readonly
Write access is not required.
mplsLdpEntityFrameRelayLRLen readonly
Write access is not required.
mplsLdpEntityFrameRelayLRStorageType readonly
Write access is not required.
mplsLdpEntityFrameRelayLRRowStatus readonly
active(1)
Write access is not required, and active is the
only status that needs to be supported.