MPLS-LDP-STD-MIB
Copyright (C) The Internet Society (2004). The
initial version of this MIB module was published
in RFC 3815. For full legal notices see the RFC
itself or see:
http://www.ietf.org/copyrights/ianamib.html
This MIB contains managed object definitions for the
'Multiprotocol Label Switching, Label Distribution
Protocol, LDP' document.
- Source file
MPLS-LDP-STD-MIB- Last revised
- Identity
mplsLdpStdMIB- Base OID
1.3.6.1.2.1.10.166.4
Imported Objects
| DIFFSERV-MIB | IndexInteger IndexIntegerNextFree |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType InetPortNumber |
| MPLS-LSR-STD-MIB | MplsIndexType |
| MPLS-TC-STD-MIB | MplsLabelDistributionMethod MplsLdpIdentifier MplsLdpLabelType MplsLspType MplsLsrIdentifier MplsRetentionMode mplsStdMIB |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TimeInterval TimeStamp TruthValue |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'MPLS-LDP-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'MPLS-LDP-STD-MIB::mplsLdpStdMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPLS-LDP-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPLS-LDP-STD-MIB::mplsLdpStdMIB'
Objects (117)
Showing 117 of 117 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.10.166.4 |
||
.1.3.6.1.2.1.10.166.4.0 |
||
.1.3.6.1.2.1.10.166.4.1 |
||
.1.3.6.1.2.1.10.166.4.1.1 |
||
.1.3.6.1.2.1.10.166.4.1.1.1 |
||
|
Enumeration
|
.1.3.6.1.2.1.10.166.4.1.1.2 |
|
.1.3.6.1.2.1.10.166.4.1.2 |
||
.1.3.6.1.2.1.10.166.4.1.2.1 |
||
.1.3.6.1.2.1.10.166.4.1.2.2 |
||
.1.3.6.1.2.1.10.166.4.1.2.3 |
||
.1.3.6.1.2.1.10.166.4.1.2.3.1 |
||
.1.3.6.1.2.1.10.166.4.1.2.3.1.1 |
||
|
secondsUnsigned32
|
.1.3.6.1.2.1.10.166.4.1.2.3.1.10 |
|
|
Integer32
|
.1.3.6.1.2.1.10.166.4.1.2.3.1.11 |
|
.1.3.6.1.2.1.10.166.4.1.2.3.1.12 |
||
.1.3.6.1.2.1.10.166.4.1.2.3.1.13 |
||
|
Integer32
|
.1.3.6.1.2.1.10.166.4.1.2.3.1.14 |
|
|
Integer32
|
.1.3.6.1.2.1.10.166.4.1.2.3.1.15 |
|
|
Enumeration
|
.1.3.6.1.2.1.10.166.4.1.2.3.1.16 |
|
.1.3.6.1.2.1.10.166.4.1.2.3.1.17 |
||
.1.3.6.1.2.1.10.166.4.1.2.3.1.18 |
||
.1.3.6.1.2.1.10.166.4.1.2.3.1.19 |
||
.1.3.6.1.2.1.10.166.4.1.2.3.1.2 |
||
.1.3.6.1.2.1.10.166.4.1.2.3.1.20 |
||
.1.3.6.1.2.1.10.166.4.1.2.3.1.21 |
||
.1.3.6.1.2.1.10.166.4.1.2.3.1.22 |
||
.1.3.6.1.2.1.10.166.4.1.2.3.1.23 |
||
|
Unsigned32
|
.1.3.6.1.2.1.10.166.4.1.2.3.1.3 |
|
|
Enumeration
|
.1.3.6.1.2.1.10.166.4.1.2.3.1.4 |
|
|
Enumeration
|
.1.3.6.1.2.1.10.166.4.1.2.3.1.5 |
|
.1.3.6.1.2.1.10.166.4.1.2.3.1.6 |
||
.1.3.6.1.2.1.10.166.4.1.2.3.1.7 |
||
|
octetsUnsigned32
|
.1.3.6.1.2.1.10.166.4.1.2.3.1.8 |
|
|
secondsUnsigned32
|
.1.3.6.1.2.1.10.166.4.1.2.3.1.9 |
|
.1.3.6.1.2.1.10.166.4.1.2.4 |
||
.1.3.6.1.2.1.10.166.4.1.2.4.1 |
||
.1.3.6.1.2.1.10.166.4.1.2.4.1.1 |
||
.1.3.6.1.2.1.10.166.4.1.2.4.1.10 |
||
.1.3.6.1.2.1.10.166.4.1.2.4.1.11 |
||
.1.3.6.1.2.1.10.166.4.1.2.4.1.12 |
||
.1.3.6.1.2.1.10.166.4.1.2.4.1.13 |
||
.1.3.6.1.2.1.10.166.4.1.2.4.1.2 |
||
.1.3.6.1.2.1.10.166.4.1.2.4.1.3 |
||
.1.3.6.1.2.1.10.166.4.1.2.4.1.4 |
||
.1.3.6.1.2.1.10.166.4.1.2.4.1.5 |
||
.1.3.6.1.2.1.10.166.4.1.2.4.1.6 |
||
.1.3.6.1.2.1.10.166.4.1.2.4.1.7 |
||
.1.3.6.1.2.1.10.166.4.1.2.4.1.8 |
||
.1.3.6.1.2.1.10.166.4.1.2.4.1.9 |
||
.1.3.6.1.2.1.10.166.4.1.3 |
||
.1.3.6.1.2.1.10.166.4.1.3.1 |
||
.1.3.6.1.2.1.10.166.4.1.3.10 |
||
.1.3.6.1.2.1.10.166.4.1.3.10.1 |
||
|
Enumeration
|
.1.3.6.1.2.1.10.166.4.1.3.10.1.1 |
|
.1.3.6.1.2.1.10.166.4.1.3.10.1.2 |
||
.1.3.6.1.2.1.10.166.4.1.3.10.1.3 |
||
.1.3.6.1.2.1.10.166.4.1.3.10.1.4 |
||
.1.3.6.1.2.1.10.166.4.1.3.10.1.5 |
||
.1.3.6.1.2.1.10.166.4.1.3.11 |
||
.1.3.6.1.2.1.10.166.4.1.3.11.1 |
||
|
Unsigned32
|
.1.3.6.1.2.1.10.166.4.1.3.11.1.1 |
|
.1.3.6.1.2.1.10.166.4.1.3.11.1.2 |
||
.1.3.6.1.2.1.10.166.4.1.3.11.1.3 |
||
.1.3.6.1.2.1.10.166.4.1.3.2 |
||
.1.3.6.1.2.1.10.166.4.1.3.2.1 |
||
.1.3.6.1.2.1.10.166.4.1.3.2.1.1 |
||
.1.3.6.1.2.1.10.166.4.1.3.2.1.2 |
||
|
Integer32
|
.1.3.6.1.2.1.10.166.4.1.3.2.1.3 |
|
.1.3.6.1.2.1.10.166.4.1.3.2.1.4 |
||
.1.3.6.1.2.1.10.166.4.1.3.2.1.5 |
||
.1.3.6.1.2.1.10.166.4.1.3.3 |
||
.1.3.6.1.2.1.10.166.4.1.3.3.1 |
||
.1.3.6.1.2.1.10.166.4.1.3.3.1.1 |
||
|
Enumeration
|
.1.3.6.1.2.1.10.166.4.1.3.3.1.2 |
|
|
Enumeration
|
.1.3.6.1.2.1.10.166.4.1.3.3.1.3 |
|
|
Unsigned32
|
.1.3.6.1.2.1.10.166.4.1.3.3.1.4 |
|
.1.3.6.1.2.1.10.166.4.1.3.3.1.5 |
||
|
secondsUnsigned32
|
.1.3.6.1.2.1.10.166.4.1.3.3.1.6 |
|
|
octetsUnsigned32
|
.1.3.6.1.2.1.10.166.4.1.3.3.1.7 |
|
.1.3.6.1.2.1.10.166.4.1.3.3.1.8 |
||
.1.3.6.1.2.1.10.166.4.1.3.4 |
||
.1.3.6.1.2.1.10.166.4.1.3.4.1 |
||
.1.3.6.1.2.1.10.166.4.1.3.4.1.1 |
||
.1.3.6.1.2.1.10.166.4.1.3.4.1.2 |
||
.1.3.6.1.2.1.10.166.4.1.3.5 |
||
.1.3.6.1.2.1.10.166.4.1.3.5.1 |
||
.1.3.6.1.2.1.10.166.4.1.3.5.1.1 |
||
|
Unsigned32
|
.1.3.6.1.2.1.10.166.4.1.3.5.1.1.1 |
|
|
secondsSNMPv2-TCTimeInterval
|
.1.3.6.1.2.1.10.166.4.1.3.5.1.1.2 |
|
|
Unsigned32
|
.1.3.6.1.2.1.10.166.4.1.3.5.1.1.3 |
|
|
Enumeration
|
.1.3.6.1.2.1.10.166.4.1.3.5.1.1.4 |
|
.1.3.6.1.2.1.10.166.4.1.3.6 |
||
.1.3.6.1.2.1.10.166.4.1.3.6.1 |
||
.1.3.6.1.2.1.10.166.4.1.3.6.1.1 |
||
.1.3.6.1.2.1.10.166.4.1.3.6.1.2 |
||
.1.3.6.1.2.1.10.166.4.1.3.6.1.3 |
||
.1.3.6.1.2.1.10.166.4.1.3.7 |
||
.1.3.6.1.2.1.10.166.4.1.3.7.1 |
||
.1.3.6.1.2.1.10.166.4.1.3.7.1.1 |
||
.1.3.6.1.2.1.10.166.4.1.3.7.1.2 |
||
.1.3.6.1.2.1.10.166.4.1.3.7.1.3 |
||
.1.3.6.1.2.1.10.166.4.1.3.8 |
||
.1.3.6.1.2.1.10.166.4.1.3.8.1 |
||
.1.3.6.1.2.1.10.166.4.1.3.8.2 |
||
.1.3.6.1.2.1.10.166.4.1.3.8.3 |
||
.1.3.6.1.2.1.10.166.4.1.3.8.3.1 |
||
.1.3.6.1.2.1.10.166.4.1.3.8.3.1.1 |
||
|
|
Enumeration
|
.1.3.6.1.2.1.10.166.4.1.3.8.3.1.2 |
.1.3.6.1.2.1.10.166.4.1.3.8.3.1.3 |
||
|
|
.1.3.6.1.2.1.10.166.4.1.3.8.3.1.4 |
|
|
|
.1.3.6.1.2.1.10.166.4.1.3.8.3.1.5 |
|
.1.3.6.1.2.1.10.166.4.1.3.8.3.1.6 |
||
|
|
.1.3.6.1.2.1.10.166.4.1.3.8.3.1.7 |
|
.1.3.6.1.2.1.10.166.4.1.3.9 |
||
.1.3.6.1.2.1.10.166.4.2 |
||
.1.3.6.1.2.1.10.166.4.2.1 |
||
.1.3.6.1.2.1.10.166.4.2.2 |
Dependencies (13) 7 direct · 6 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
Conformance Groups (3)
Compliance Statements (2)
OID
.1.3.6.1.2.1.10.166.4.2.2.1The Module is implemented with support
for read-create and read-write. In other
words, both monitoring and configuration
are available when using this MODULE-COMPLIANCE.
for read-create and read-write. In other
words, both monitoring and configuration
are available when using this MODULE-COMPLIANCE.
Required groups
| mandatory | mplsLdpGeneralGroup | |
| mandatory | mplsLdpNotificationsGroup | |
| optional | mplsLdpLspGroup |
This group must be supported if the LSR MIB is implemented, specifically the mplsInSegmentTable, the mplsOutSegmentTable or the mplsXCTable. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| mplsLdpEntityTargetPeerAddrType |
unknown(0), ipv4(1), ipv6(2)
|
An implementation is only required to support 'unknown(0)', IPv4 and globally unique IPv6 addresses. |
|
| mplsLdpEntityTargetPeerAddr | An implementation is only required to support IPv4 and globally unique IPv6 addresses. |
||
| mplsLdpEntityRowStatus |
active(1)
|
Support for createAndWait and notInService is not required. |
|
| mplsFecAddrType |
unknown(0), ipv4(1), ipv6(2)
|
An implementation is only required to support 'unknown(0)', IPv4 and globally unique IPv6 addresses. |
|
| mplsFecAddr | An implementation is only required to support IPv4 and globally unique IPv6 addresses. |
||
| mplsFecRowStatus |
active(1)
|
Support for createAndWait and notInService is not required. |
|
| mplsLdpLspFecRowStatus |
active(1)
|
Support for createAndWait and notInService is not required. |
|
| mplsLdpSessionPeerNextHopAddrType |
unknown(0), ipv4(1), ipv6(2)
|
An implementation is only required to support 'unknown(0)', IPv4 and globally unique IPv6 addresses. |
|
| mplsLdpSessionPeerNextHopAddr | An implementation is only required to support IPv4 and globally unique IPv6 addresses. |
OID
.1.3.6.1.2.1.10.166.4.2.2.2The Module is implemented with support
for read-only. In other words, only monitoring
is available by implementing this MODULE-COMPLIANCE.
for read-only. In other words, only monitoring
is available by implementing this MODULE-COMPLIANCE.
Required groups
| mandatory | mplsLdpGeneralGroup | |
| mandatory | mplsLdpNotificationsGroup | |
| optional | mplsLdpLspGroup |
This group must be supported if the LSR MIB is implemented, specifically the mplsInSegmentTable, the mplsOutSegmentTable or the mplsXCTable. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| mplsLdpEntityProtocolVersion | readonly | Write access is not required. | |
| mplsLdpEntityAdminStatus | readonly | Write access is not required. | |
| mplsLdpEntityTcpPort | readonly | Write access is not required. | |
| mplsLdpEntityUdpDscPort | readonly | Write access is not required. | |
| mplsLdpEntityMaxPduLength | readonly | Write access is not required. | |
| mplsLdpEntityKeepAliveHoldTimer | readonly | Write access is not required. | |
| mplsLdpEntityHelloHoldTimer | readonly | Write access is not required. | |
| mplsLdpEntityInitSessionThreshold | readonly | Write access is not required. | |
| mplsLdpEntityLabelDistMethod | readonly | Write access is not required. | |
| mplsLdpEntityLabelRetentionMode | readonly | Write access is not required. | |
| mplsLdpEntityPathVectorLimit | readonly | Write access is not required. | |
| mplsLdpEntityHopCountLimit | readonly | Write access is not required. | |
| mplsLdpEntityTransportAddrKind | readonly | Write access is not required. | |
| mplsLdpEntityTargetPeer | readonly | Write access is not required. | |
| mplsLdpEntityTargetPeerAddrType | readonly |
unknown(0), ipv4(1), ipv6(2)
|
Write access is not required. An implementation is only required to support 'unknown(0)', IPv4 and globally unique IPv6 addresses. |
| mplsLdpEntityTargetPeerAddr | readonly | Write access is not required. An implementation is only required to support IPv4 and globally unique IPv6 addresses. |
|
| mplsLdpEntityLabelType | readonly | Write access is not required. | |
| mplsLdpEntityStorageType | readonly | Write access is not required. | |
| mplsLdpEntityRowStatus | readonly |
active(1)
|
Write access is not required, and active is the only status that needs to be supported. |
| mplsFecType | readonly | Write access is not required. | |
| mplsFecAddrPrefixLength | readonly | Write access is not required. | |
| mplsFecAddrType | readonly |
unknown(0), ipv4(1), ipv6(2)
|
Write access is not required. An implementation is only required to support 'unknown(0)', IPv4 and globally unique IPv6 addresses. |
| mplsFecAddr | readonly | Write access is not required. An implementation is only required to support IPv4 and globally unique IPv6 addresses. |
|
| mplsFecStorageType | readonly | Write access is not required. | |
| mplsFecRowStatus | readonly |
active(1)
|
Write access is not required, and active is the only status that needs to be supported. |
| mplsLdpLspFecStorageType | readonly | Write access is not required. | |
| mplsLdpLspFecRowStatus | readonly |
active(1)
|
Write access is not required, and active is the only status that needs to be supported. |
| mplsLdpSessionPeerNextHopAddrType |
unknown(0), ipv4(1), ipv6(2)
|
An implementation is only required to support 'unknown(0)', IPv4 and globally unique IPv6 addresses. |
|
| mplsLdpSessionPeerNextHopAddr | An implementation is only required to support IPv4 and globally unique IPv6 addresses. |
Notifications / Traps (4)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.2.1.10.166.4.0.1 |
This notification is generated when the value of
the 'mplsLdpEntityInitSessionThreshold' object is not zero, and the number of Session Initialization messages exceeds the value of the 'mplsLdpEntityInitSessionThreshold' object. |
|
.1.3.6.1.2.1.10.166.4.0.2 |
This notification is sent when the
'mplsLdpEntityPathVectorLimit' does NOT match the value of the 'mplsLdpPeerPathVectorLimit' for a specific Entity. |
|
.1.3.6.1.2.1.10.166.4.0.3 |
If this notification is sent when the
value of 'mplsLdpSessionState' enters the 'operational(5)' state. |
|
.1.3.6.1.2.1.10.166.4.0.4 |
This notification is sent when the
value of 'mplsLdpSessionState' leaves the 'operational(5)' state. |