mplsLdpEntityIndex

MPLS-LDP-STD-MIB · .1.3.6.1.2.1.10.166.4.1.2.3.1.2

Object

column DIFFSERV-MIBIndexInteger

This index is used as a secondary index to uniquely
identify this row.  Before creating a row in this table,
the 'mplsLdpEntityIndexNext' object should be retrieved.
That value should be used for the value of this index
when creating a row in this table.  NOTE:  if a value
of zero (0) is retrieved, that indicates that no rows
can be created in this table at this time.
              
A secondary index (this object) is meaningful to some
but not all, LDP implementations.  For example
an LDP implementation which uses PPP would
use this index to differentiate PPP sub-links.
              
Another way to use this index is to give this the
value of ifIndex.  However, this is dependant
              
on the implementation.

Context

MIB: MPLS-LDP-STD-MIB
OID: .1.3.6.1.2.1.10.166.4.1.2.3.1.2
Type: column
Access: noaccess
Status: current
Parent: mplsLdpEntityEntry
Table: mplsLdpEntityTable
Siblings: 22

Syntax

DIFFSERV-MIBIndexInteger

Source: DIFFSERV-MIBIndexInteger
Base type: Unsigned32

Values & Constraints

Type Constraints

range: 1..4294967295

Related Objects

Sibling Objects

Object	Type	Syntax	OID
mplsLdpEntityLdpId The LDP identifier.	column	MPLS-TC-STD-MIBMplsLdpIdentifier	`.1.3.6.1.2.1.10.166.4.1.2.3.1.1`
mplsLdpEntityHelloHoldTimer The 16-bit integer value which is the proposed Hello hold timer for this LDP Entity. The Hello Hold time in seconds. An LSR maintains a record of Hellos received fr…	column	seconds Unsigned32	`.1.3.6.1.2.1.10.166.4.1.2.3.1.10`
mplsLdpEntityInitSessionThreshold When attempting to establish a session with a given Peer, the given LDP Entity should send out the SNMP notification, 'mplsLdpInitSessionThresholdExceeded', when the number of Ses…	column	Integer32	`.1.3.6.1.2.1.10.166.4.1.2.3.1.11`
mplsLdpEntityLabelDistMethod For any given LDP session, the method of label distribution must be specified.	column	MPLS-TC-STD-MIBMplsLabelDistributionMethod	`.1.3.6.1.2.1.10.166.4.1.2.3.1.12`
mplsLdpEntityLabelRetentionMode The LDP Entity can be configured to use either conservative or liberal label retention mode. If the value of this object is conservative(1) then advertized label ma…	column	MPLS-TC-STD-MIBMplsRetentionMode	`.1.3.6.1.2.1.10.166.4.1.2.3.1.13`
mplsLdpEntityPathVectorLimit If the value of this object is 0 (zero) then Loop Detection for Path Vectors is disabled. Otherwise, if this object has a value greater than zero, then Loop Dection…	column	Integer32	`.1.3.6.1.2.1.10.166.4.1.2.3.1.14`
mplsLdpEntityHopCountLimit If the value of this object is 0 (zero), then Loop Detection using Hop Counters is disabled. If the value of this object is greater than 0 (zero) then Loop Detectio…	column	Integer32	`.1.3.6.1.2.1.10.166.4.1.2.3.1.15`
mplsLdpEntityTransportAddrKind This specifies whether the loopback or interface address is to be used as the transport address in the transport address TLV of the hello message. If the value is i…	column	Enumeration	`.1.3.6.1.2.1.10.166.4.1.2.3.1.16`
mplsLdpEntityTargetPeer If this LDP entity uses targeted peer then set this to true.	column	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.10.166.4.1.2.3.1.17`
mplsLdpEntityTargetPeerAddrType The type of the internetwork layer address used for the Extended Discovery. This object indicates how the value of mplsLdpEntityTargetPeerAddr is to be interpreted.	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.2.1.10.166.4.1.2.3.1.18`
mplsLdpEntityTargetPeerAddr The value of the internetwork layer address used for the Extended Discovery. The value of mplsLdpEntityTargetPeerAddrType specifies how this address is to be interpreted.	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.2.1.10.166.4.1.2.3.1.19`
mplsLdpEntityLabelType Specifies the optional parameters for the LDP Initialization Message. If the value is generic(1) then no optional parameters will be sent in the LDP Initialization …	column	MPLS-TC-STD-MIBMplsLdpLabelType	`.1.3.6.1.2.1.10.166.4.1.2.3.1.20`
mplsLdpEntityDiscontinuityTime The value of sysUpTime on the most recent occasion at which any one or more of this entity's counters suffered a discontinuity. The relevant counters are the specific instances a…	column	SNMPv2-TCTimeStamp	`.1.3.6.1.2.1.10.166.4.1.2.3.1.21`
mplsLdpEntityStorageType The storage type for this conceptual row. Conceptual rows having the value 'permanent(4)' need not allow write-access to any columnar objects in the row.	column	SNMPv2-TCStorageType	`.1.3.6.1.2.1.10.166.4.1.2.3.1.22`
mplsLdpEntityRowStatus The status of this conceptual row. All writable objects in this row may be modified at any time, however, as described in detail in the section entitled, 'Changing Values After S…	column	SNMPv2-TCRowStatus	`.1.3.6.1.2.1.10.166.4.1.2.3.1.23`
mplsLdpEntityProtocolVersion The version number of the LDP protocol which will be used in the session initialization message. Section 3.5.3 in the LDP Specification specifies that the version o…	column	Unsigned32	`.1.3.6.1.2.1.10.166.4.1.2.3.1.3`
mplsLdpEntityAdminStatus The administrative status of this LDP Entity. If this object is changed from 'enable' to 'disable' and this entity has already attempted to establish contact with a Peer, then all…	column	Enumeration	`.1.3.6.1.2.1.10.166.4.1.2.3.1.4`
mplsLdpEntityOperStatus The operational status of this LDP Entity. The value of unknown(1) indicates that the operational status cannot be determined at this time. The value of unknown sh…	column	Enumeration	`.1.3.6.1.2.1.10.166.4.1.2.3.1.5`
mplsLdpEntityTcpPort The TCP Port for LDP. The default value is the well-known value of this port.	column	INET-ADDRESS-MIBInetPortNumber	`.1.3.6.1.2.1.10.166.4.1.2.3.1.6`
mplsLdpEntityUdpDscPort The UDP Discovery Port for LDP. The default value is the well-known value for this port.	column	INET-ADDRESS-MIBInetPortNumber	`.1.3.6.1.2.1.10.166.4.1.2.3.1.7`
mplsLdpEntityMaxPduLength The maximum PDU Length that is sent in the Common Session Parameters of an Initialization Message. According to the LDP Specification [RFC3036] a value of 255 or less specifies th…	column	octets Unsigned32	`.1.3.6.1.2.1.10.166.4.1.2.3.1.8`
mplsLdpEntityKeepAliveHoldTimer The 16-bit integer value which is the proposed keep alive hold timer for this LDP Entity.	column	seconds Unsigned32	`.1.3.6.1.2.1.10.166.4.1.2.3.1.9`