HUAWEI-SEP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
62

hwSepSegmentTable

table
.1.3.6.1.4.1.2011.5.25.223.1.2 · 1 row entry · 19 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSepSegmentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-SEP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-SEP-MIB::hwSepSegmentTable' 
The table includes the information of SEP segments.
hwSepSegmentEntry row .1.3.6.1.4.1.2011.5.25.223.1.2.1
The table includes the information of SEP segments.
The index of the table is SEP segment id.
Indexes
Column Syntax OID
hwSepSegmentId
SEP segment Identifier.
Integer32
Constraints:
range: 1-1024
 .1.3.6.1.4.1.2011.5.25.223.1.2.1.1
hwSepControlVlanId
The control VLAN identifier of the SEP segment.
If the value of the object is set 0, the operation is delete configuration.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.2011.5.25.223.1.2.1.2
hwSepPreemptManual
Trigger the manual preemption by setting the object to be 1.
When getting the object it will always be 0.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.2011.5.25.223.1.2.1.3
hwSepPreemptDelay
The preemption delay timer of the SEP segment.
If the value of the object is set 0, the operation is delete configuration.
Integer32r/w
Constraints:
range: 15-600
range: 0-0
 .1.3.6.1.4.1.2011.5.25.223.1.2.1.4
hwSepBlockPortMode
The way to choose the port to be blocked.
if the value of the object is set 1, the optimal port.
if the value of the object is set 2, the middle port.
if the value of the object is set 3, the port with the designated ho…
Enumerationr/w
Enumerated Values:
1optimal
2middle
3hop
4name
5null
 .1.3.6.1.4.1.2011.5.25.223.1.2.1.5
hwSepBlockPortHop
The hop count of the preffered blocking port.
If the value of the object is set 0, the operation is delete configuration.
If the mode of block port is not hop(3), the value is not have effect.
Integer32r/w
Constraints:
range: 0-512
 .1.3.6.1.4.1.2011.5.25.223.1.2.1.6
hwSepBlockPortSysname
The system name of the preffered blocking port.
if not set the value of hwSepBlockPortIfname, this configuration is not take effect.
if the mode of block port is not name(4), this configuration is not task effect.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.2011.5.25.223.1.2.1.7
hwSepBlockPortIfname
The interface name of the preffered blocking port.
if not set the value of hwSepBlockPortSysname, this configuration is not take effect.
if the mode of block port is not name(4), this configuration is not take effect.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.5.25.223.1.2.1.8
hwSepTcNotifySep
The bitmap of the SEP segments to which the topology change event will be notified
OctetStringr/w
Constraints:
range: 0-129
 .1.3.6.1.4.1.2011.5.25.223.1.2.1.9
hwSepTcNotifyRrpp
If set 1, the topology change event of the SEP segment will be notified to RRPP
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.223.1.2.1.10
hwSepTcNotifyStp
If set 1, the topology change event of the SEP segment will be notified to STP
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.223.1.2.1.11
hwSepTcNotifyVpls
If set 1, the topology change event of the SEP segment will be notified to VPLS
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.223.1.2.1.12
hwSepTcNotifyVll
If set 1, the topology change event of the SEP segment will be notified to VLL
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.223.1.2.1.13
hwSepTcNotifySmartLinkCtrlVlan
If set control vlan, the topology change event of the SEP segment will be notified to Smart-Link.
If the value of the object is set 0, the operation is delete configuration.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.2011.5.25.223.1.2.1.14
hwSepDealSmartLinkFlush
If set 1, the SEP segment will deal the smart link flush-FDB packet
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.223.1.2.1.15
hwSepProtectedInstanceList
The protected instance list of the SEP segment
OctetStringr/w
Constraints:
range: 0-512
 .1.3.6.1.4.1.2011.5.25.223.1.2.1.16
hwSepTcProtectionInterval
The interval of tc-protection, the default value is 2.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.2011.5.25.223.1.2.1.17
hwSepSegmentDescription
A textual description of the SEP segment.
It is mandatory that this only contain no more than 255 printable ASCII characters.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.5.25.223.1.2.1.18
hwSepSegmentRowStatus
Operation of CreateAndGo can be used to create a new SEP segment,
and operation of Destroy be used to destroy an existent SEP segment.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.223.1.2.1.128

hwSepTopologyTable

table
.1.3.6.1.4.1.2011.5.25.223.1.3 · 1 row entry · 13 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSepTopologyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-SEP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-SEP-MIB::hwSepTopologyTable' 
The table includes the information of the topology of the SEP segment.
hwSepTopologyEntry row .1.3.6.1.4.1.2011.5.25.223.1.3.1
The table includes the information of the topology of the SEP segment.
The index of the table is the segment identifier and the hop count of the port.
Indexes
Column Syntax OID
hwSepHop
The hop count of the port.
Integer32
Constraints:
range: 1-512
 .1.3.6.1.4.1.2011.5.25.223.1.3.1.1
hwSepPortId
The port identifier. For example: 00.E0.6E.70.23.00.00.00 (hex). The first 6 bytes is the mac address of the device
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.2011.5.25.223.1.3.1.2
hwSepTopoSysname
The system name.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2011.5.25.223.1.3.1.3
hwSepTopoPortname
The port name.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.5.25.223.1.3.1.4
hwSepTopoPortConfigPriority
The configured port priority.The default value is 64.
Integer32
Constraints:
range: 1-128
 .1.3.6.1.4.1.2011.5.25.223.1.3.1.5
hwSepTopoPortActivePriority
The active port priority.
IF-MIBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.223.1.3.1.6
hwSepTopoConfigPortRole
The configued port role:
role value
common 0x10
edge secondary 0x21
edge primary 0x22
no neighbor edge secondary 0x31
no neighbor edge primary 0…
IF-MIBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.223.1.3.1.7
hwSepTopoActivePortRole
The active port role:
role value
common 0x10
edge secondary 0x21
edge primary 0x22
no neighbor edge secondary 0x31
no neighbor edge primary 0x32
IF-MIBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.223.1.3.1.8
hwSepTopoPortNbrState
The state of the neighbor state machine:
state value
down 1
init 2
preup 3
up 4
conflict 5
Enumeration
Enumerated Values:
1down
2init
3preup
4up
5conflict
 .1.3.6.1.4.1.2011.5.25.223.1.3.1.9
hwSepTopoBrotherPortId
The brother port identifier. For example: 00.E0.6E.70.23.00.00.00 (hex). The first 6 bytes is the mac address of the device
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.2011.5.25.223.1.3.1.10
hwSepTopoNbrPortId
The neighbor port identifier. For example: 00.E0.6E.70.23.00.00.00 (hex). The first 6 bytes is the mac address of the device
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.2011.5.25.223.1.3.1.11
hwSepTopoPortLinkState
The link state of the port:
state value
link down 1
link up 2
Enumeration
Enumerated Values:
1down
2up
 .1.3.6.1.4.1.2011.5.25.223.1.3.1.12
hwSepTopoPortFwdState
The forwarding state of the port:
state value
discarding 1
forwarding 2
Enumeration
Enumerated Values:
1discarding
2forwarding
 .1.3.6.1.4.1.2011.5.25.223.1.3.1.13

hwSepPortTable

table
.1.3.6.1.4.1.2011.5.25.223.1.4 · 1 row entry · 30 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSepPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-SEP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-SEP-MIB::hwSepPortTable' 
The table includes the information of SEP ports
hwSepPortEntry row .1.3.6.1.4.1.2011.5.25.223.1.4.1
The table includes the information of SEP ports.
The index of the table is SEP segment identifier, port type, port identifier1, port identifier2, port identifier3, port identifier4.
If it is an ethernet port including f…
Indexes
Column Syntax OID
hwSepPortType
The port type.Currently SEP just support ethernet port and the value is 1.
Unsigned32
Constraints:
range: 1-1
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.1
hwSepPortId1
The port identifier1, when the hwSepPortType is 1, the value of the object is the IfIndex of the port.
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.2
hwSepPortId2
The port identifier2, Currently it is not used and only for extension, should be set 0.
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.3
hwSepPortId3
The port identifier3, Currently it is not used and only for extension, should be set 0.
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.4
hwSepPortId4
The port identifier4, Currently it is not used and only for extension, should be set 0.
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.5
hwSepSysname
The system name.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.6
hwSepPortname
The port name
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.7
hwSepPortConfigPriority
The configured port priority.The default value is 64.
Integer32r/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.8
hwSepPortActivePriority
The active port priority.
IF-MIBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.9
hwSepConfigPortRole
The configued port role:
role value
common 0x10
edge secondary 0x21
edge primary 0x22
no neighbor edge secondary 0x31
no neighbor edge primary 0…
IF-MIBInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.10
hwSepActivePortRole
The active port role:
role value
common 0x10
edge secondary 0x21
edge primary 0x22
no neighbor edge secondary 0x31
no neighbor edge primary 0x32
IF-MIBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.11
hwSepPortNbrState
The state of the neighbor state machine:
state value
down 1
init 2
preup 3
up 4
conflict 5
Enumeration
Enumerated Values:
1down
2init
3preup
4up
5conflict
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.12
hwSepNbrPortId
The identifier of the neighbor port. For example: 00.E0.6E.70.23.00.00.00 (hex)
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.13
hwSepPortFwdState
The forwarding state of the port:
state value
discarding 1
forwarding 2
Enumeration
Enumerated Values:
1discarding
2forwarding
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.14
hwSepRxNbrPktCnt
The number of received neighbor packets.
IF-MIBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.15
hwSepTxNbrPktCnt
The number of transmited neighbor packets.
IF-MIBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.16
hwSepRxLsaInfoPktCnt
The number of received LSA information packets.
IF-MIBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.17
hwSepTxLsaInfoPktCnt
The number of transmitted LSA information packets.
IF-MIBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.18
hwSepRxLsaAckPktCnt
The number of received LSA acknowledgement packets.
IF-MIBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.19
hwSepTxLsaAckPktCnt
The number of transmitted LSA acknowledgement packets.
IF-MIBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.20
hwSepRxPreemptReqPktCnt
The number of received preemption request packets.
IF-MIBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.21
hwSepTxPreemptReqPktCnt
The number of transmitted preemption request packets.
IF-MIBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.22
hwSepRxPreemptAckPktCnt
The number of received preemption acknowledgement packets.
IF-MIBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.23
hwSepTxPreemptAckPktCnt
The number of transmitted preemption acknowledgement packets.
IF-MIBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.24
hwSepRxTcPktCnt
The number of received topology change packets.
IF-MIBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.25
hwSepTxTcPktCnt
The number of transmitted topology change packets.
IF-MIBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.26
hwSepRxEpaPktCnt
The number of received topology change packets.
IF-MIBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.27
hwSepTxEpaPktCnt
The number of transmitted topology change packets.
IF-MIBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.28
hwSepResetPortPktCnt
Reset the packet counter of the port in the SEP segment.
The value of hwSepResetPktCnt is unused(65535) when it is read.
The value of hwSepResetPktCnt must be clear(1) when it is set.
Enumerationr/w
Enumerated Values:
1clear
65535unused
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.29
hwSepPortRowStatus
Operation of CreateAndGo can be used to have a port join the SEP segment.
and operation of Destroy be used to have a port leave the SEP segment.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.223.1.4.1.128