hwSepTcNotifyVpls
HUAWEI-SEP-MIB ·
.1.3.6.1.4.1.2011.5.25.223.1.2.1.12
Object
If set 1, the topology change event of the SEP segment will be notified to VPLS
Context
- MIB
- HUAWEI-SEP-MIB
- OID
.1.3.6.1.4.1.2011.5.25.223.1.2.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwSepSegmentEntry
- Table
- hwSepSegmentTable
- Siblings
- 18
Syntax
P-BRIDGE-MIBEnabledStatus
- Source
- P-BRIDGE-MIBEnabledStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwSepSegmentId SEP segment Identifier. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.223.1.2.1.1 |
| hwSepTcNotifyRrpp If set 1, the topology change event of the SEP segment will be notified to RRPP | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.223.1.2.1.10 |
| hwSepTcNotifyStp If set 1, the topology change event of the SEP segment will be notified to STP | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.223.1.2.1.11 |
| hwSepSegmentRowStatus Operation of CreateAndGo can be used to create a new SEP segment,
and operation of Destroy be used to destroy an existent SEP segment. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.223.1.2.1.128 |
| hwSepTcNotifyVll If set 1, the topology change event of the SEP segment will be notified to VLL | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.223.1.2.1.13 |
| hwSepTcNotifySmartLinkCtrlVlan If set control vlan, the topology change event of the SEP segment will be notified to Smart-Link.
If the value of the object is set 0, the operation is delete configuration. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.223.1.2.1.14 |
| hwSepDealSmartLinkFlush If set 1, the SEP segment will deal the smart link flush-FDB packet | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.223.1.2.1.15 |
| hwSepProtectedInstanceList The protected instance list of the SEP segment | column | OctetString | .1.3.6.1.4.1.2011.5.25.223.1.2.1.16 |
| hwSepTcProtectionInterval The interval of tc-protection, the default value is 2. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.223.1.2.1.17 |
| hwSepSegmentDescription A textual description of the SEP segment.
It is mandatory that this only contain no more than 255 printable ASCII characters. | column | OctetString | .1.3.6.1.4.1.2011.5.25.223.1.2.1.18 |
| hwSepControlVlanId The control VLAN identifier of the SEP segment.
If the value of the object is set 0, the operation is delete configuration. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.223.1.2.1.2 |
| hwSepPreemptManual Trigger the manual preemption by setting the object to be 1.
When getting the object it will always be 0. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.223.1.2.1.3 |
| hwSepPreemptDelay The preemption delay timer of the SEP segment.
If the value of the object is set 0, the operation is delete configuration. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.223.1.2.1.4 |
| hwSepBlockPortMode The way to choose the port to be blocked.
if the value of the object is set 1, the optimal port.
if the value of the object is set 2, the middle port.
if the value of the object i… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.223.1.2.1.5 |
| hwSepBlockPortHop The hop count of the preffered blocking port.
If the value of the object is set 0, the operation is delete configuration.
If the mode of block port is not hop(3), the value is not… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.223.1.2.1.6 |
| hwSepBlockPortSysname The system name of the preffered blocking port.
if not set the value of hwSepBlockPortIfname, this configuration is not take effect.
if the mode of block port is not name(4), this… | column | OctetString | .1.3.6.1.4.1.2011.5.25.223.1.2.1.7 |
| hwSepBlockPortIfname The interface name of the preffered blocking port.
if not set the value of hwSepBlockPortSysname, this configuration is not take effect.
if the mode of block port is not name(4), … | column | OctetString | .1.3.6.1.4.1.2011.5.25.223.1.2.1.8 |
| hwSepTcNotifySep The bitmap of the SEP segments to which the topology change event will be notified | column | OctetString | .1.3.6.1.4.1.2011.5.25.223.1.2.1.9 |