hwSepRxPreemptAckPktCnt
HUAWEI-SEP-MIB ·
.1.3.6.1.4.1.2011.5.25.223.1.4.1.23
Object
column
IF-MIBInteger32
The number of received preemption acknowledgement packets.
Context
- MIB
- HUAWEI-SEP-MIB
- OID
.1.3.6.1.4.1.2011.5.25.223.1.4.1.23- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwSepPortEntry
- Table
- hwSepPortTable
- Siblings
- 29
Syntax
IF-MIBInteger32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwSepPortType The port type.Currently SEP just support ethernet port and the value is 1. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.1 |
| hwSepConfigPortRole The configued port role:
role value
common 0x10
edge secondary 0x21
edge primary 0x22
no neighbor edge secon… | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.10 |
| hwSepActivePortRole The active port role:
role value
common 0x10
edge secondary 0x21
edge primary 0x22
no neighbor edge secondar… | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.11 |
| hwSepPortNbrState The state of the neighbor state machine:
state value
down 1
init 2
preup 3
up 4
conflict 5 | column | Enumeration | .1.3.6.1.4.1.2011.5.25.223.1.4.1.12 |
| hwSepPortRowStatus Operation of CreateAndGo can be used to have a port join the SEP segment.
and operation of Destroy be used to have a port leave the SEP segment. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.223.1.4.1.128 |
| hwSepNbrPortId The identifier of the neighbor port. For example: 00.E0.6E.70.23.00.00.00 (hex) | column | OctetString | .1.3.6.1.4.1.2011.5.25.223.1.4.1.13 |
| hwSepPortFwdState The forwarding state of the port:
state value
discarding 1
forwarding 2 | column | Enumeration | .1.3.6.1.4.1.2011.5.25.223.1.4.1.14 |
| hwSepRxNbrPktCnt The number of received neighbor packets. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.15 |
| hwSepTxNbrPktCnt The number of transmited neighbor packets. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.16 |
| hwSepRxLsaInfoPktCnt The number of received LSA information packets. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.17 |
| hwSepTxLsaInfoPktCnt The number of transmitted LSA information packets. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.18 |
| hwSepRxLsaAckPktCnt The number of received LSA acknowledgement packets. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.19 |
| hwSepPortId1 The port identifier1, when the hwSepPortType is 1, the value of the object is the IfIndex of the port. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.2 |
| hwSepTxLsaAckPktCnt The number of transmitted LSA acknowledgement packets. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.20 |
| hwSepRxPreemptReqPktCnt The number of received preemption request packets. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.21 |
| hwSepTxPreemptReqPktCnt The number of transmitted preemption request packets. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.22 |
| hwSepTxPreemptAckPktCnt The number of transmitted preemption acknowledgement packets. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.24 |
| hwSepRxTcPktCnt The number of received topology change packets. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.25 |
| hwSepTxTcPktCnt The number of transmitted topology change packets. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.26 |
| hwSepRxEpaPktCnt The number of received topology change packets. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.27 |
| hwSepTxEpaPktCnt The number of transmitted topology change packets. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.28 |
| hwSepResetPortPktCnt Reset the packet counter of the port in the SEP segment.
The value of hwSepResetPktCnt is unused(65535) when it is read.
The value of hwSepResetPktCnt must be clear(1)… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.223.1.4.1.29 |
| hwSepPortId2 The port identifier2, Currently it is not used and only for extension, should be set 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.3 |
| hwSepPortId3 The port identifier3, Currently it is not used and only for extension, should be set 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.4 |
| hwSepPortId4 The port identifier4, Currently it is not used and only for extension, should be set 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.5 |
| hwSepSysname The system name. | column | OctetString | .1.3.6.1.4.1.2011.5.25.223.1.4.1.6 |
| hwSepPortname The port name | column | OctetString | .1.3.6.1.4.1.2011.5.25.223.1.4.1.7 |
| hwSepPortConfigPriority The configured port priority.The default value is 64. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.8 |
| hwSepPortActivePriority The active port priority. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.9 |