hwSepBlockPortSysname

HUAWEI-SEP-MIB · .1.3.6.1.4.1.2011.5.25.223.1.2.1.7
MIB view Table view

Object

column r/w OctetString 
The system name of the preffered blocking port.
if not set the value of hwSepBlockPortIfname, this configuration is not take effect.
if the mode of block port is not name(4), this configuration is not task effect.

Context

MIB
HUAWEI-SEP-MIB
OID
.1.3.6.1.4.1.2011.5.25.223.1.2.1.7
Type
column
Access
readwrite
Status
current
Parent
hwSepSegmentEntry
Table
hwSepSegmentTable
Siblings
18

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-20

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwSepSegmentId
SEP segment Identifier.
columnInteger32.1.3.6.1.4.1.2011.5.25.223.1.2.1.1
hwSepTcNotifyRrpp
If set 1, the topology change event of the SEP segment will be notified to RRPP
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.223.1.2.1.10
hwSepTcNotifyStp
If set 1, the topology change event of the SEP segment will be notified to STP
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.223.1.2.1.11
hwSepTcNotifyVpls
If set 1, the topology change event of the SEP segment will be notified to VPLS
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.223.1.2.1.12
hwSepSegmentRowStatus
Operation of CreateAndGo can be used to create a new SEP segment, and operation of Destroy be used to destroy an existent SEP segment.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2011.5.25.223.1.2.1.128
hwSepTcNotifyVll
If set 1, the topology change event of the SEP segment will be notified to VLL
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.223.1.2.1.13
hwSepTcNotifySmartLinkCtrlVlan
If set control vlan, the topology change event of the SEP segment will be notified to Smart-Link. If the value of the object is set 0, the operation is delete configuration.
columnInteger32.1.3.6.1.4.1.2011.5.25.223.1.2.1.14
hwSepDealSmartLinkFlush
If set 1, the SEP segment will deal the smart link flush-FDB packet
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.223.1.2.1.15
hwSepProtectedInstanceList
The protected instance list of the SEP segment
columnOctetString.1.3.6.1.4.1.2011.5.25.223.1.2.1.16
hwSepTcProtectionInterval
The interval of tc-protection, the default value is 2.
columnInteger32.1.3.6.1.4.1.2011.5.25.223.1.2.1.17
hwSepSegmentDescription
A textual description of the SEP segment. It is mandatory that this only contain no more than 255 printable ASCII characters.
columnOctetString.1.3.6.1.4.1.2011.5.25.223.1.2.1.18
hwSepControlVlanId
The control VLAN identifier of the SEP segment. If the value of the object is set 0, the operation is delete configuration.
columnInteger32.1.3.6.1.4.1.2011.5.25.223.1.2.1.2
hwSepPreemptManual
Trigger the manual preemption by setting the object to be 1. When getting the object it will always be 0.
columnInteger32.1.3.6.1.4.1.2011.5.25.223.1.2.1.3
hwSepPreemptDelay
The preemption delay timer of the SEP segment. If the value of the object is set 0, the operation is delete configuration.
columnInteger32.1.3.6.1.4.1.2011.5.25.223.1.2.1.4
hwSepBlockPortMode
The way to choose the port to be blocked. if the value of the object is set 1, the optimal port. if the value of the object is set 2, the middle port. if the value of the object i…
columnEnumeration.1.3.6.1.4.1.2011.5.25.223.1.2.1.5
hwSepBlockPortHop
The hop count of the preffered blocking port. If the value of the object is set 0, the operation is delete configuration. If the mode of block port is not hop(3), the value is not…
columnInteger32.1.3.6.1.4.1.2011.5.25.223.1.2.1.6
hwSepBlockPortIfname
The interface name of the preffered blocking port. if not set the value of hwSepBlockPortSysname, this configuration is not take effect. if the mode of block port is not name(4), …
columnOctetString.1.3.6.1.4.1.2011.5.25.223.1.2.1.8
hwSepTcNotifySep
The bitmap of the SEP segments to which the topology change event will be notified
columnOctetString.1.3.6.1.4.1.2011.5.25.223.1.2.1.9