hwSepResetPortPktCnt
HUAWEI-SEP-MIB ·
.1.3.6.1.4.1.2011.5.25.223.1.4.1.29
Object
column
r/w
Enumeration
Reset the packet counter of the port in the SEP segment.
The value of hwSepResetPktCnt is unused(65535) when it is read.
The value of hwSepResetPktCnt must be clear(1) when it is set.
Context
- MIB
- HUAWEI-SEP-MIB
- OID
.1.3.6.1.4.1.2011.5.25.223.1.4.1.29- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwSepPortEntry
- Table
- hwSepPortTable
- Siblings
- 29
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | clear |
65535 | unused |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwSepPortType The port type.Currently SEP just support ethernet port and the value is 1. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.1 |
| hwSepConfigPortRole The configued port role:
role value
common 0x10
edge secondary 0x21
edge primary 0x22
no neighbor edge secon… | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.10 |
| hwSepActivePortRole The active port role:
role value
common 0x10
edge secondary 0x21
edge primary 0x22
no neighbor edge secondar… | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.11 |
| hwSepPortNbrState The state of the neighbor state machine:
state value
down 1
init 2
preup 3
up 4
conflict 5 | column | Enumeration | .1.3.6.1.4.1.2011.5.25.223.1.4.1.12 |
| hwSepPortRowStatus Operation of CreateAndGo can be used to have a port join the SEP segment.
and operation of Destroy be used to have a port leave the SEP segment. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.223.1.4.1.128 |
| hwSepNbrPortId The identifier of the neighbor port. For example: 00.E0.6E.70.23.00.00.00 (hex) | column | OctetString | .1.3.6.1.4.1.2011.5.25.223.1.4.1.13 |
| hwSepPortFwdState The forwarding state of the port:
state value
discarding 1
forwarding 2 | column | Enumeration | .1.3.6.1.4.1.2011.5.25.223.1.4.1.14 |
| hwSepRxNbrPktCnt The number of received neighbor packets. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.15 |
| hwSepTxNbrPktCnt The number of transmited neighbor packets. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.16 |
| hwSepRxLsaInfoPktCnt The number of received LSA information packets. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.17 |
| hwSepTxLsaInfoPktCnt The number of transmitted LSA information packets. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.18 |
| hwSepRxLsaAckPktCnt The number of received LSA acknowledgement packets. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.19 |
| hwSepPortId1 The port identifier1, when the hwSepPortType is 1, the value of the object is the IfIndex of the port. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.2 |
| hwSepTxLsaAckPktCnt The number of transmitted LSA acknowledgement packets. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.20 |
| hwSepRxPreemptReqPktCnt The number of received preemption request packets. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.21 |
| hwSepTxPreemptReqPktCnt The number of transmitted preemption request packets. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.22 |
| hwSepRxPreemptAckPktCnt The number of received preemption acknowledgement packets. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.23 |
| hwSepTxPreemptAckPktCnt The number of transmitted preemption acknowledgement packets. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.24 |
| hwSepRxTcPktCnt The number of received topology change packets. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.25 |
| hwSepTxTcPktCnt The number of transmitted topology change packets. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.26 |
| hwSepRxEpaPktCnt The number of received topology change packets. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.27 |
| hwSepTxEpaPktCnt The number of transmitted topology change packets. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.28 |
| hwSepPortId2 The port identifier2, Currently it is not used and only for extension, should be set 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.3 |
| hwSepPortId3 The port identifier3, Currently it is not used and only for extension, should be set 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.4 |
| hwSepPortId4 The port identifier4, Currently it is not used and only for extension, should be set 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.5 |
| hwSepSysname The system name. | column | OctetString | .1.3.6.1.4.1.2011.5.25.223.1.4.1.6 |
| hwSepPortname The port name | column | OctetString | .1.3.6.1.4.1.2011.5.25.223.1.4.1.7 |
| hwSepPortConfigPriority The configured port priority.The default value is 64. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.8 |
| hwSepPortActivePriority The active port priority. | column | IF-MIBInteger32 | .1.3.6.1.4.1.2011.5.25.223.1.4.1.9 |