CISCO-MGX82XX-DSX1-MIB Table View

The DS1/E1 Configuration table. The table size is
given by the value of lineNumofValidEntries

dsx1CnfGrpEntry row .1.3.6.1.4.1.351.110.4.3.1.1.1.1

An entry in the DS1 Configuration table.

Indexes

lineNum

Column	Syntax	OID
lineNum This object is the identifier of a DS1/E1 Interface on a managed device. If there is an ifEntry that is directly associated with this and only this DS1/E1 interface, it should have the same value as ifIndex. Otherwise,…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.351.110.4.3.1.1.1.1.1
lineConnectorType This variable indicates the connector as well as the backcard type. 1 = T1; 2 = E1. This field is set to unused(4) for FRSM-VHS cards.	Enumerationr/w Enumerated Values: 1 db15 2 bnc 3 rj48 4 unused 5 smb	.1.3.6.1.4.1.351.110.4.3.1.1.1.1.2
lineEnable This variable disables, enables or modifies a line 1 - disable 2 - enable 3 - modify In FRSM-2CT3, if the DS3 line is enabled, then the DS1 channels for that line will all be automatically enabled. No independent enabl…	Enumerationr/w Enumerated Values: 1 disable 2 enable 3 modify	.1.3.6.1.4.1.351.110.4.3.1.1.1.1.3
lineType This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably carry, as well as the interpretation of the…	Enumerationr/w Enumerated Values: 1 dsx1ESF 2 dsx1D4 3 dsx1E1 4 dsx1E1CRC 5 dsx1E1MF 6 dsx1E1CRC-MF 7 dsx1E1clearchannel 8 dsx1E1Q50 9 dsx1E1Q50CRC	.1.3.6.1.4.1.351.110.4.3.1.1.1.1.4
lineCoding This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. dsx1JBZS(1): refers the Jammed Bit Zero suppression …	Enumerationr/w Enumerated Values: 1 dsx1JBZS 2 dsx1B8ZS 3 dsx1HDB3 4 dsx1AMI 5 unused	.1.3.6.1.4.1.351.110.4.3.1.1.1.1.5
lineLength This is not a standard RFC 1407 DS1 variable, it is specific to BASIS implementation. It specifies the line length: 1 - 0 to 110 ft (T1 line only) 2 - 110 to 220 ft (T1 line only) 3 - 220 to 330 ft (T1 line only) 4 -…	Enumerationr/w Enumerated Values: 1 lineLength0To110Feet 2 lineLength110To220Feet 3 lineLength220To330Feet 4 lineLength330To440Feet 5 lineLength440To550Feet 6 lineLength550To660Feet 7 lineLength660FeetPlus 8 lineLength-75-Ohm 9 lineLength-120-Ohm 10 lineLength0To131Feet 11 lineLength131To262Feet 12 lineLength262To393Feet 13 lineLength393To524Feet 14 lineLength524To655Feet 15 lineLength655FeetPlus 16 notRequired	.1.3.6.1.4.1.351.110.4.3.1.1.1.1.6
lineXmtClockSource The source of Transmit Clock. loopTiming(1): indicates that the recovered receive clock is used as the transmit clock. localTiming(2): indicates that a local clock …	Enumerationr/w Enumerated Values: 1 loopTiming 2 localTiming	.1.3.6.1.4.1.351.110.4.3.1.1.1.1.7
lineLoopbackCommand This variable represents the loopback confi- guration of the DS1 interface. Agents support- ing read/write access should return badValue in response to a requested loopback state that the interface does not support. …	Enumerationr/w Enumerated Values: 1 dsx1NoLoop 2 dsx1RemoteLoop 3 dsx1LocalLoop 4 dsx1PayloadLoop	.1.3.6.1.4.1.351.110.4.3.1.1.1.1.8
lineSendCode This variable indicates what type of code is being sent across the DS1 interface by the dev- ice. The values mean: dsx1SendNoCode sending looped or normal data dsx1SendLineCode …	Enumerationr/w Enumerated Values: 1 dsx1SendNoCode 2 dsx1SendLineCode 3 dsx1SendPayloadCode 4 dsx1SendResetCode	.1.3.6.1.4.1.351.110.4.3.1.1.1.1.9
lineUsedTimeslotsBitMap Bit map of used DS0 for this line.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.1.1.1.1.10
lineLoopbackCodeDetection Enable detection of line Loopback Codes	Enumerationr/w Enumerated Values: 1 codeDetectDisabled 2 codeDetectEnabled	.1.3.6.1.4.1.351.110.4.3.1.1.1.1.11
lineBERTEnable This variable enables Bit Error Rate Testing(BERT).	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.351.110.4.3.1.1.1.1.12
lineBERTPattern This variable determines BERT pattern to transmit	Enumerationr/w Enumerated Values: 1 allZeros 2 allOnes 3 alternateONeZero 4 doubleOneZero 5 userOneWords 6 userTwoWords 7 userThreeWords 8 userFourWords 9 fifteenBit 10 twentyBit 11 twentyBitQRSS 12 twentythreeBit	.1.3.6.1.4.1.351.110.4.3.1.1.1.1.13
lineBERTResult This shows the result of the BERT.	Enumerationr/w Enumerated Values: 1 failed 2 passed	.1.3.6.1.4.1.351.110.4.3.1.1.1.1.14
bERTResultClrButton This clears the result of the BERT.	Enumerationr/w Enumerated Values: 1 noaction 2 clear	.1.3.6.1.4.1.351.110.4.3.1.1.1.1.15

The DS1 interface alarm configuration table.

dsx1AlmCnfGrpEntry row .1.3.6.1.4.1.351.110.4.3.1.2.1.1

An entry in the DS1 Alarm Configuration table.

Indexes

almCnfLineNum

Column	Syntax	OID
almCnfLineNum This object identifies the DS1/E1 interface. The value for this object must be same as the value of lineNum from dsx1CnfGrpTable.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.351.110.4.3.1.2.1.1.1
redSeverity This variable is used to setup the severity of RED alarm. So when RED alarm is detected by the card, an alarm with appropriate severity status will be sent.	Enumerationr/w Enumerated Values: 1 minor 2 major	.1.3.6.1.4.1.351.110.4.3.1.2.1.1.2
rAISeverity This variable is used to setup the severity of RAI alarm. So when LOS alarm is detected the card, an alarm with appropriate severity status will be sent.	Enumerationr/w Enumerated Values: 1 minor 2 major	.1.3.6.1.4.1.351.110.4.3.1.2.1.1.3
nEAlarmUpCount This parameter specifies the integration counter, the local alarms are LOS and LOF. Default value is 6 and update counter every 10 ms to reach the threshold set in threshold object. This is the up counter.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.1.2.1.1.4
nEAlarmDownCount This parameter specifies the integration counter, the Near-End alarms are LOS and LOF. Default value is 1 and update counter every 10 ms to reach 0. This is the down counter.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.1.2.1.1.5
nEAlarmThreshold The value set in this object determines the value to declare Near-End alarm. A count of 1500 gives 2.5 sec to declare LOS with an up count value of 6.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.1.2.1.1.6
fEAlarmUpCount This parameter specifies the integration counter, the Far-End alarms are AIS and YEL. Default value is 6 and update counter 10 ms to reach the threshold set in threshold object. This is the up counter.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.1.2.1.1.7
fEAlarmDownCount This parameter specifies the integration counter, the Far-End alarms are AIS and YEL. Default value is 1 and update counter every 10 ms to reach 0. This is the down counter.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.1.2.1.1.8
fEAlarmThreshold The value set in this object determines the value to declare Far-End alarm. A count of 1500 gives 2.5 secs to declare LOS with an up count value of 6.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.1.2.1.1.9
statisticalAlarmSeverity This variable is used to setup the severity of Statistical alarm. So when any statistical alarm is detected by the card, an alarm with appropriate severity status will be sent.	Enumerationr/w Enumerated Values: 1 minor 2 major 3 inhibit	.1.3.6.1.4.1.351.110.4.3.1.2.1.1.10
lCV15MinThreshold Code Violation - is the occurrence of a received CRC-6 code that is not identical to the corresponding locally. calculated code. The value set in this object determines the value which when exceeded in a 15 minute wind…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.1.2.1.1.11
lCV24HrThreshold Code Violation - is the occurence of a received CRC-6 code that is not identical to the corresponding locally. The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a s…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.1.2.1.1.12
lES15MinThreshold Errored Second - is any second with at least one code violation. The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be declared.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.1.2.1.1.13
lES24HrThreshold Errored Second - is any second with at least one code violation. The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The thresh…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.1.2.1.1.14
lSES15MinThreshold Severely Errored Second - is any second with 15 or more code violations. The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be declared.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.1.2.1.1.15
lSES24HrThreshold Severely Errored Second - is any second with 15 or more code violations. The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The …	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.1.2.1.1.16
cRC15MinThreshold The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be declared.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.1.2.1.1.17
cRC24HrThreshold The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is checked every 15 minutes for the preceding 24 hour interval	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.1.2.1.1.18
cRCES15MinThreshold The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be declared.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.1.2.1.1.19
cRCES24HrThreshold The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is checked every 15 minutes for the preceding 24 hour interval	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.1.2.1.1.20
cRCSES15MinThreshold The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be declared.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.1.2.1.1.21
cRCSES24HrThreshold The value set in this object determines the value when exceeded in a sliding 24 hour window causes a statistical alarm to be declared. The threshold is checked every 15 minutes for the preceding 24 hour interval	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.1.2.1.1.22
sEFS15MinThreshold Severely Errored Framing Second - is a count of one-second intervals containing one or more SEF events. The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical al…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.1.2.1.1.23
sEFS24HrThreshold Severely Errored Framing Second - is a count of one-second intervals containing one or more SEF events. The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statisti…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.1.2.1.1.24
aISS15MinThreshold Alarm Indication Signal Second - is a count of one-second intervals containing one or more incoming AIS. The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical …	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.1.2.1.1.25
aISS24HrThreshold Alarm Indication Signal Second - is a count of one-second intervals containing one or more incoming AIS. The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statis…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.1.2.1.1.26
uAS15MinThreshold Unavailable Second - is a count of seconds during which the DS1 Layer service is unavailable. The value set in this object determines the value which when exceeded in a 15 minute window causes a statistical alarm to be …	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.1.2.1.1.27
uAS24HrThreshold Unavailable Second - is a count of seconds during which the DS1 Layer service is unavailable. The value set in this object determines the value which when exceeded in a sliding 24 hour window causes a statistical alarm …	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.1.2.1.1.28

The DS1 interface alarm configuration table.

dsx1AlmGrpEntry row .1.3.6.1.4.1.351.110.4.3.1.3.1.1

An entry in the DS1 Alarm table. Each entry
represents the current, 15 minute and 24 Hour bucket
intervals for different performance parameters.

Indexes

almLineNum

Column	Syntax	OID
almLineNum This object identifies the DS1/E1 interface. The value for this object must be same as the value of lineNum from dsx1CnfGrpTable.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.1
lineAlarmState This variable is a bitmap of the DSX1 Line Alarms. A value of zero indicates no alarms. Itemized below are the individual bits: BitPosition Alarm ----------- ----- 0 Receiving RAI 1 Trans…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.2
lineStatisticalAlarmState This variable is a bitmap of the DSX1 Line Statistical Alarms. A value of zero indicates no alarms. Itemized below are the individual alarm bits: BitPosition Alarm ----------- ----- 0 LCV 15 minute th…	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.3
lCVCurrent This counter counts the number of Line code violations encountered by the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.4
lCV15MinBucket The counter associated with the number of Line code violations in the last 15 minute period encountered by the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.5
lCV24HrBucket The counter associated with the number of Line code violations in the last 24 hour period encountered by the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.6
lESCurrent This counter counts the number of Line code violations Errored Seconds encountered by the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.7
lES15MinBucket This counter counts the number of Line code violations Errored Seconds in the last 15 minutes encountered by the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.8
lES24HrBucket This counter counts the number of Line code violations Errored Seconds in the last 24 hours encountered by the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.9
lSESCurrent This counter counts the number of Line code violations Severely Errored Seconds encountered by the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.10
lSES15MinBucket This counter counts the number of LCV Severely Errored Seconds in the last 15 minutes encountered by the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.11
lSES24HrBucket This counter counts the number of LCV Severely Errored Seconds in the last 24 hours encountered by the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.12
cRCCurrent This counter counts the number of P Bit code violations encountered by the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.13
cRC15MinBucket This counter counts the number of P Bit code violations in the last 15 minutes encountered by the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.14
cRC24HrBucket This counter counts the number of P Bit code violations in the last 24 hours encountered by the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.15
cRCESCurrent This counter counts the number of PCV Errored Seconds encountered by the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.16
cRCES15MinBucket This counter counts the number of PCV Errored Seconds in the last 15 minutes encountered by the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.17
cRCES24HrBucket This counter counts the number of PCV Errored Seconds in the last 24 hours encountered by the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.18
cRCSESCurrent This counter counts the number of P Bit code violations Severely Errored Seconds encountered by the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.19
cRCSES15MinBucket This counter counts the number of PCV Severely Errored Seconds in the last 15 minutes encountered by the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.20
cRCSES24HrBucket This counter counts the number of PCV Severely Errored Seconds in the last 24 hours encountered by the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.21
sEFSCurrent This counter counts the number of Severely Errored Framing Seconds encountered by the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.22
sEFS15MinBucket This counter counts the number of Severely Errored Framing Seconds in the last 15 minutes encountered by the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.23
sEFS24HrBucket This counter counts the number of Severely Errored Framing Seconds in the last 24 hours encountered by the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.24
aISSCurrent This counter counts the number of AIS Severely Errored Seconds encountered by the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.25
aISS15MinBucket This counter counts the number of AIS Severely Errored Seconds in the last 15 minutes encountered by the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.26
aISS24HrBucket This counter counts the number of AIS Severely Errored Seconds in the last 24 hours encountered by the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.27
uASCurrent This counter counts the number of Unavailable Seconds encountered by the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.28
uAS15MinBucket This counter counts the number of Unavailable Seconds in the last 15 minutes encountered by the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.29
uAS24HrBucket This counter counts the number of Unavailable Seconds in the last 24 hours encountered by the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.30
percentEFS This counter counts the %LCV Error Free Seconds.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.31
alarmClrButton This variable is used to clear all the alarms for the line. 1 = No action 2 = Clear alarm	Enumerationr/w Enumerated Values: 1 noaction 2 clear	.1.3.6.1.4.1.351.110.4.3.1.3.1.1.32

The DS1 Counter table. This table contains
statistics since the system was up or last
re-initialization.

dsx1CntGrpEntry row .1.3.6.1.4.1.351.110.4.3.1.4.1.1

An entry in the DS1 counter table.

Indexes

cntLineNum

Column	Syntax	OID
cntLineNum This object identifies the DS1/E1 interface. The value for this object must be same as the value of lineNum from dsx1CnfGrpTable.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.351.110.4.3.1.4.1.1.1
rcvLOSCount The number of times the Loss of Signal was detected with or without integrating to LOS alarm.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.4.1.1.2
rcvOOFCount The number of times the Out of Frame was detected with or without integrating to OOF alarm.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.4.1.1.3
rcvRAICount The number of times Yellow Alarms was detected with or without integrating to RAI alarm.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.4.1.1.4
rcvFECount The number of Framing Pattern Errors encountered by a DS1 interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.110.4.3.1.4.1.1.5
counterClearButton This variable is used to clear all the counters.	Enumerationr/w Enumerated Values: 1 noaction 2 clear	.1.3.6.1.4.1.351.110.4.3.1.4.1.1.6