fEAlarmThreshold
CISCO-MGX82XX-DSX1-MIB ·
.1.3.6.1.4.1.351.110.4.3.1.2.1.1.9
Object
column
r/w
Integer32
The value set in this object determines the value to declare Far-End alarm. A count of 1500 gives 2.5 secs to declare LOS with an up count value of 6.
Context
- MIB
- CISCO-MGX82XX-DSX1-MIB
- OID
.1.3.6.1.4.1.351.110.4.3.1.2.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- dsx1AlmCnfGrpEntry
- Table
- dsx1AlmCnfGrpTable
- Siblings
- 27
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| almCnfLineNum This object identifies the DS1/E1 interface.
The value for this object must be same as the
value of lineNum from dsx1CnfGrpTable. | column | Integer32 | .1.3.6.1.4.1.351.110.4.3.1.2.1.1.1 |
| statisticalAlarmSeverity This variable is used to setup the severity of Statistical
alarm. So when any statistical alarm is detected by the card,
an alarm with appropriate severity status will be sent. | column | Enumeration | .1.3.6.1.4.1.351.110.4.3.1.2.1.1.10 |
| lCV15MinThreshold Code Violation - is the occurrence of a received CRC-6
code that is not identical to the corresponding locally.
calculated code. The value set in this object determines
the value… | column | Integer32 | .1.3.6.1.4.1.351.110.4.3.1.2.1.1.11 |
| lCV24HrThreshold Code Violation - is the occurence of a received CRC-6
code that is not identical to the corresponding locally.
The value set in this object determines the value
which when exceede… | column | Integer32 | .1.3.6.1.4.1.351.110.4.3.1.2.1.1.12 |
| lES15MinThreshold Errored Second - is any second with at least one
code violation. The value set in this object determines
the value which when exceeded in a 15 minute window causes
a statistical… | column | Integer32 | .1.3.6.1.4.1.351.110.4.3.1.2.1.1.13 |
| lES24HrThreshold Errored Second - is any second with at least one
code violation. The value set in this object determines
the value which when exceeded in a sliding 24 hour window
causes a stat… | column | Integer32 | .1.3.6.1.4.1.351.110.4.3.1.2.1.1.14 |
| lSES15MinThreshold Severely Errored Second - is any second with 15 or more
code violations. The value set in this object determines
the value which when exceeded in a 15 minute window causes
a stat… | column | Integer32 | .1.3.6.1.4.1.351.110.4.3.1.2.1.1.15 |
| lSES24HrThreshold Severely Errored Second - is any second with 15 or more
code violations. The value set in this object determines
the value which when exceeded in a sliding 24 hour window causes
… | column | Integer32 | .1.3.6.1.4.1.351.110.4.3.1.2.1.1.16 |
| cRC15MinThreshold The value set in this object determines the value
which when exceeded in a 15 minute window causes
a statistical alarm to be declared. | column | Integer32 | .1.3.6.1.4.1.351.110.4.3.1.2.1.1.17 |
| cRC24HrThreshold The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes
a statistical alarm to be declared. The threshold is
checked every 15 minu… | column | Integer32 | .1.3.6.1.4.1.351.110.4.3.1.2.1.1.18 |
| cRCES15MinThreshold The value set in this object determines the value
which when exceeded in a 15 minute window causes
a statistical alarm to be declared. | column | Integer32 | .1.3.6.1.4.1.351.110.4.3.1.2.1.1.19 |
| redSeverity This variable is used to setup the severity of RED
alarm. So when RED alarm is detected by the card, an
alarm with appropriate severity status will be sent. | column | Enumeration | .1.3.6.1.4.1.351.110.4.3.1.2.1.1.2 |
| cRCES24HrThreshold The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes
a statistical alarm to be declared. The threshold is
checked every 15 minu… | column | Integer32 | .1.3.6.1.4.1.351.110.4.3.1.2.1.1.20 |
| cRCSES15MinThreshold The value set in this object determines the value
which when exceeded in a 15 minute window causes
a statistical alarm to be declared. | column | Integer32 | .1.3.6.1.4.1.351.110.4.3.1.2.1.1.21 |
| cRCSES24HrThreshold The value set in this object determines the value
when exceeded in a sliding 24 hour window causes
a statistical alarm to be declared. The threshold is
checked every 15 minutes fo… | column | Integer32 | .1.3.6.1.4.1.351.110.4.3.1.2.1.1.22 |
| sEFS15MinThreshold Severely Errored Framing Second - is a count of one-second
intervals containing one or more SEF events.
The value set in this object determines the value
which when exceeded in a … | column | Integer32 | .1.3.6.1.4.1.351.110.4.3.1.2.1.1.23 |
| sEFS24HrThreshold Severely Errored Framing Second - is a count of one-second
intervals containing one or more SEF events.
The value set in this object determines the value
which when exceeded in a … | column | Integer32 | .1.3.6.1.4.1.351.110.4.3.1.2.1.1.24 |
| aISS15MinThreshold Alarm Indication Signal Second - is a count of one-second
intervals containing one or more incoming AIS.
The value set in this object determines the value
which when exceeded in … | column | Integer32 | .1.3.6.1.4.1.351.110.4.3.1.2.1.1.25 |
| aISS24HrThreshold Alarm Indication Signal Second - is a count of one-second
intervals containing one or more incoming AIS.
The value set in this object determines the value
which when exceeded in … | column | Integer32 | .1.3.6.1.4.1.351.110.4.3.1.2.1.1.26 |
| uAS15MinThreshold Unavailable Second - is a count of seconds during
which the DS1 Layer service is unavailable.
The value set in this object determines the value
which when exceeded in a 15 minute … | column | Integer32 | .1.3.6.1.4.1.351.110.4.3.1.2.1.1.27 |
| uAS24HrThreshold Unavailable Second - is a count of seconds during
which the DS1 Layer service is unavailable.
The value set in this object determines the value
which when exceeded in a sliding 24… | column | Integer32 | .1.3.6.1.4.1.351.110.4.3.1.2.1.1.28 |
| rAISeverity This variable is used to setup the severity of RAI
alarm. So when LOS alarm is detected the card, an
alarm with appropriate severity status will be sent. | column | Enumeration | .1.3.6.1.4.1.351.110.4.3.1.2.1.1.3 |
| nEAlarmUpCount This parameter specifies the integration counter,
the local alarms are LOS and LOF. Default value
is 6 and update counter every 10 ms to reach the
threshold set in threshold objec… | column | Integer32 | .1.3.6.1.4.1.351.110.4.3.1.2.1.1.4 |
| nEAlarmDownCount This parameter specifies the integration counter,
the Near-End alarms are LOS and LOF. Default value
is 1 and update counter every 10 ms to reach 0.
This is the down counter. | column | Integer32 | .1.3.6.1.4.1.351.110.4.3.1.2.1.1.5 |
| nEAlarmThreshold The value set in this object determines the value
to declare Near-End alarm. A count of 1500 gives
2.5 sec to declare LOS with an up count value of
6. | column | Integer32 | .1.3.6.1.4.1.351.110.4.3.1.2.1.1.6 |
| fEAlarmUpCount This parameter specifies the integration counter,
the Far-End alarms are AIS and YEL. Default value
is 6 and update counter 10 ms to reach the
threshold set in threshold object.
T… | column | Integer32 | .1.3.6.1.4.1.351.110.4.3.1.2.1.1.7 |
| fEAlarmDownCount This parameter specifies the integration counter,
the Far-End alarms are AIS and YEL. Default value
is 1 and update counter every 10 ms to reach 0.
This is the down counter. | column | Integer32 | .1.3.6.1.4.1.351.110.4.3.1.2.1.1.8 |