CISCO-CABLE-SPECTRUM-MIB Table View

This table keeps the records of modem state changes,
so it can be used to identify the problematic cable 
modems.
An entry per modem is added to the table automatically 
by the system when it detects any state changes to
the modem.  Therefore, it can be deleted but 
can not be added by the management system.

ccsCmFlapEntry row .1.3.6.1.4.1.9.9.114.1.1.11.1

List of attributes for an entry in the ccsCmFlapTable.
An entry in this table exists for each cable modem that
triggered one of our flap detectors.

Indexes

ccsCmFlapDownstreamIfIndex ccsCmFlapUpstreamIfIndex ccsCmFlapMacAddr

Column	Syntax	OID
ccsCmFlapDownstreamIfIndex The ifIndex of the Cable downstream interface whose ifType is docsCableDownstream(128).	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.9.9.114.1.1.11.1.1
ccsCmFlapUpstreamIfIndex The ifIndex of the Cable upstream interface whose ifType is docsCableUpstream(129). The CMTS detects a flapping Cable Modem from its Cable upstream interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.9.9.114.1.1.11.1.2
ccsCmFlapMacAddr MAC address of the Cable Modem's Cable interface which identifies a flapping Cable Modem.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.114.1.1.11.1.3
ccsCmFlapLastFlapTime The flap time is set whenever the Cable Modem triggers a flap detector.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.9.9.114.1.1.11.1.4
ccsCmFlapCreateTime The time that this entry was added to the table. If an entry is removed and then later re-added, there may be a discontinuity in the counters associated with this entry. This timestamp can be used to detect those disco…	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.9.9.114.1.1.11.1.5
ccsCmFlapInsertionFailNum The number of times a Cable Modem registered more frequently than expected. Excessive registration is defined as the presence of a time span between two successive registration cycles which is less than a threshold spa…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.114.1.1.11.1.6
ccsCmFlapHitNum The number of times the CMTS receives the Ranging request from the Cable Modem. The CMTS issues a Station Maintenance transmit opportunity at a typical rate of once every 10 seconds and waits for a Rangin…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.114.1.1.11.1.7
ccsCmFlapMissNum The number of times the CMTS misses the Ranging request from the Cable Modem. The CMTS issues a Station Maintenance packet every 10 seconds and waits for a Ranging request from the Cable Modem. If the CMT…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.114.1.1.11.1.8
ccsCmFlapCrcErrorNum The number of times the CMTS upstream receiver flagged a packet with a CRC error. If ccsCmFlapCrcErrorNum is high, it indicates the cable upstream may have high noise level. The modem may not be flapping …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.114.1.1.11.1.9
ccsCmFlapPowerAdjustmentNum The number of times the Cable Modem upstream transmit power is adjusted during station maintenance. When the adjustment is greater than the power adjustment threshold the number will be incremented. The power adjustment…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.114.1.1.11.1.10
ccsCmFlapTotalNum Whenever the Cable Modem passes flap detection, then the flap number is increased. There are 3 flap detectors defined: (1) When ccsCmFlapInsertionFailNum is increased the Flap number will be increased…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.114.1.1.11.1.11
ccsCmFlapResetNow Setting this object to true(1) will set the value of certain objects in this table to 0 and does not destroy the entry, so the ccsCmFlapCreateTime will be unchanged. Reading this object always returns false(2).	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.114.1.1.11.1.12
ccsCmFlapLastResetTime The last time that all the statistical objects of this entry are started from zero. There are several ways to restart the the statistical objects from zero. Setting the object ccsCmFlapResetNow or ccsCmFlapResetAll to t…	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.9.9.114.1.1.11.1.13
ccsCmFlapRowStatus Controls and reflects the status of rows in this table. When a cable modem triggers a flap detector, if an entry does not already exist for this cable modem, an entry will be created in this table. The …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.114.1.1.11.1.14

This table contains the spectrum data requests.
          
There are two types of request: background noise and SNR.
Refer to ccsSpectrumRequestIfIndex and ccsSpectrumRequestMacAddr
DESCRIPTIONS on how the type of request is determined.

ccsSpectrumRequestEntry row .1.3.6.1.4.1.9.9.114.1.2.1.1

Information about a spectrum data request. The management
system uses ccsSpectrumRequestStatus to control entry
modification, creation, and deletion.

Setting ccsSpectrumRequestEntry to 'destroy' causes ent…

Indexes

ccsSpectrumRequestIndex

Column	Syntax	OID
ccsSpectrumRequestIndex An arbitrary integer to uniquely identify the entry.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.9.9.114.1.2.1.1.1
ccsSpectrumRequestIfIndex The ifIndex of a docsCableUpstream(129) interface. The background noise measurement is requested when ccsSpectrumRequestIfIndex is specified. The receiving power measurement is requested wh…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.9.114.1.2.1.1.2
ccsSpectrumRequestMacAddr A MAC address that identifies a remote CM. The default value of 0000.0000.0000 indicates that the background noise will be measured for the upstream. In this case, ccsSpectrumRequestIfIndex must be speci…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.114.1.2.1.1.3
ccsSpectrumRequestLowFreq Start of frequency range. The ccsSpectrumRequestLowFreq is adjusted slightly to accurately represent the actual starting point of the frequency range. The adjustment is done as follows: …	KHzCCSFrequencyr/w Type Constraints: range: 5000..85000	.1.3.6.1.4.1.9.9.114.1.2.1.1.4
ccsSpectrumRequestUpperFreq End of frequency range. With the adjustment done to the ccsSpectrumRequestLowFreq, ccsSpectrumRequestUpperFreq will also be adjusted to the last frequency within the specified range divisible by the bin s…	KHzCCSFrequencyr/w Type Constraints: range: 5000..85000	.1.3.6.1.4.1.9.9.114.1.2.1.1.5
ccsSpectrumRequestResolution A span between two frequencies. ccsSpectrumRequestResolution dictates the amount of receiving power data to be returned in ccsSpectrumDataTable. The finer the resolution, the more data returned. …	KHzInteger32r/w Constraints: range: 12-37000	.1.3.6.1.4.1.9.9.114.1.2.1.1.6
ccsSpectrumRequestOperation The control that allows 'start' or 'abort' of the test. Since there is only 1 FFT engine running on the CMTS, 'start' changes ccsSpectrumRequestOperState to 'pending' state if the FFT is busy; Otherwise, …	CCSRequestOperationr/w Type Values: 0 none 1 start 2 abort	.1.3.6.1.4.1.9.9.114.1.2.1.1.7
ccsSpectrumRequestOperState The operational state of the test. ccsSpectrumRequestIfIndex, ccsSpectrumRequestMacAddr, ccsSpectrumRequestUpperFreq, ccsSpectrumRequestLowFreq and ccsSpectrumRequestResolution cannot be changed when CCSR…	CCSRequestOperState Type Values: 0 idle 1 pending 2 running 3 noError 4 aborted 5 notOnLine 6 invalidMac 7 timeOut 8 fftBusy 9 fftFailed 10 others	.1.3.6.1.4.1.9.9.114.1.2.1.1.8
ccsSpectrumRequestStartTime The value of sysUpTime when the spectrum measurement operation starts.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.114.1.2.1.1.9
ccsSpectrumRequestStoppedTime The value of sysUpTime when the spectrum measurement operation stops.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.114.1.2.1.1.10
ccsSpectrumRequestStatus The control that allows modification, creation, and deletion of entries. For detailed rules, see the ccsSpectrumRequestEntry DESCRIPTION.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.114.1.2.1.1.11

This table contains the receiving power or background
noise measurement based on the criteria that is set in
the ccsSpectrumRequestEntry.

ccsSpectrumDataEntry row .1.3.6.1.4.1.9.9.114.1.2.2.1

Information about the receiving power or background noise
measured at a particular frequency for the
ccsSpectrumRequestEntry.

Indexes

ccsSpectrumRequestIndex ccsSpectrumDataFreq

Column	Syntax	OID
ccsSpectrumDataFreq ccsSpectrumDataPower measurement frequency. Due to the adjustment calculation the starting frequency range for the actual measured frequency if off comparing to the configured frequency. Re…	KHzCCSMeasuredFrequency Type Constraints: range: 4000..85000	.1.3.6.1.4.1.9.9.114.1.2.2.1.1
ccsSpectrumDataPower The receiving power measured at the ccsSpectrumDataFreq.	dBmVInteger32 Constraints: range: -50-50	.1.3.6.1.4.1.9.9.114.1.2.2.1.2

A table of CNR requests.

ccsSNRRequestEntry row .1.3.6.1.4.1.9.9.114.1.2.3.1

Information about an CNR request. The management
system uses ccsSNRRequestStatus to control entry
modification, creation, and deletion.

Indexes

ccsSNRRequestIndex

Column	Syntax	OID
ccsSNRRequestIndex An arbitrary integer to uniquely identify this entry.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.9.9.114.1.2.3.1.1
ccsSNRRequestMacAddr A MAC address that identifies the remote online CM that the CNR measurement operation is being performed on.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.114.1.2.3.1.2
ccsSNRRequestSNR A snap shot of the CNR value that is measured over the in-use band frequency. The ccsSNRRequestSNR is set to 0 when ccsSNRRequestOperState is in the 'running' state.	dBInteger32 Constraints: range: -100-100	.1.3.6.1.4.1.9.9.114.1.2.3.1.3
ccsSNRRequestOperation The control that allows start or abort of the test. Since there is only 1 FFT engine running on the CMTS, 'start' changes ccsSNRRequestOperState to 'pending' state if the FFT is busy; Otherwise, it change…	CCSRequestOperationr/w Type Values: 0 none 1 start 2 abort	.1.3.6.1.4.1.9.9.114.1.2.3.1.4
ccsSNRRequestOperState The operational state of the test. ccsSNRRequestMacAddr, cannot be changed when the ccsSNRRequestOperState is in the 'running' state.	CCSRequestOperState Type Values: 0 idle 1 pending 2 running 3 noError 4 aborted 5 notOnLine 6 invalidMac 7 timeOut 8 fftBusy 9 fftFailed 10 others	.1.3.6.1.4.1.9.9.114.1.2.3.1.5
ccsSNRRequestStartTime The value of sysUpTime when the CNR measurement operation starts.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.114.1.2.3.1.6
ccsSNRRequestStoppedTime The value of sysUpTime when the CNR measurement operation stops.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.114.1.2.3.1.7
ccsSNRRequestStatus The control that allows modification, creation, and deletion of entries. For detailed rules see the ccsSpectrumRequestEntry DESCRIPTION.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.114.1.2.3.1.8

This table contains the cable upstream interfaces assigned to
a spectrum group. A spectrum group contains one or more fixed
frequencies or frequency bands which can be assigned to cable
upstream interfaces in the spectrum group.

ccsUpInSpecGroupEntry row .1.3.6.1.4.1.9.9.114.1.2.4.1

An entry in ccsUpInSpecGroupTable table. Each entry represents
a cable upstream interface assigned to a spectrum group.

Indexes

ccsSpecGroupNumber ccsSpecGroupUpstreamIfIndex

Column	Syntax	OID
ccsSpecGroupNumber The spectrum group number. The value of the object is same as the value of ccsUpSpecMgmtSpecGroup object except value 0.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.114.1.2.4.1.1
ccsSpecGroupUpstreamIfIndex The ifIndex of the Cable upstream interface belonging to this Spectrum Group. The value of the corresponding instance of ifType is 'docsCableUpstream(129)'.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.9.9.114.1.2.4.1.2
ccsSpecGroupUpstreamStorage The storage type for this conceptual row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.114.1.2.4.1.3
ccsSpecGroupUpstreamRowStatus The status for this conceptual row. This object is used for creating/deleting entries in ccsUpInSpecGroupTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.114.1.2.4.1.4

This table contains the cable upstream interfaces in a
fiber-node.Each fiber-node uniquely represents an RF
domain.Cable upstream interfaces in the same fiber-node
are physically combined together into the same RF domain.

ccsUpInFiberNodeEntry row .1.3.6.1.4.1.9.9.114.1.2.5.1

An entry in ccsUpInFiberNodeTable. Each entry represents a
cable upstream interface assigned to a fiber-node.

Indexes

ccsFiberNodeNumber ccsFiberNodeUpstreamIfIndex

Column	Syntax	OID
ccsFiberNodeNumber The fiber-node number. The value of the object is same as the value of ccsUpSpecMgmtSharedSpectrum except value 0.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.114.1.2.5.1.1
ccsFiberNodeUpstreamIfIndex The ifIndex of the Cable upstream interface belonging to this Spectrum Group. The value of the corresponding instance of ifType is 'docsCableUpstream(129)'.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.9.9.114.1.2.5.1.2
ccsFiberNodeUpstreamStorage The storage type for this conceptual row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.114.1.2.5.1.3
ccsFiberNodeUpstreamRowStatus The status for this conceptual row. This object is used for creating/deleting entries in ccsUpInFiberNodeTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.114.1.2.5.1.4

This table contains the attributes of the cable
upstream interfaces, ifType of docsCableUpstream(129),
to be used for improving performance and proactive
hopping.
          
Proactive hopping is achieved by setting the SNR 
polling period over the in-use band without CM
signals.

ccsUpSpecMgmtEntry row .1.3.6.1.4.1.9.9.114.1.3.1.1

Upstream interface's spectrum management information.

Indexes

IF-MIBifIndex

Column	Syntax	OID
ccsUpSpecMgmtHopPriority A preference priority for changing the frequency, modulation, or channel width supporting the automatic switching of the modulation scheme when the channel becomes noisy. The default priority is frequency…	Enumerationr/w Enumerated Values: 0 frqModChannel 1 frqChannelMod 2 modFrqChannel 3 modChannelFrq 4 channelFrqMod 5 channelModFrq	.1.3.6.1.4.1.9.9.114.1.3.1.1.1
ccsUpSpecMgmtSnrThres1 The Signal to Noise (SNR) threshold. This object is applicable for modulation profile 1. When the CMTS detects that the SNR goes lower than ccsUpSpecMgmtSnrThres1, it switches to profile 2. Therefore, cc…	dBInteger32r/w Constraints: range: 0-0 range: 5-35	.1.3.6.1.4.1.9.9.114.1.3.1.1.2
ccsUpSpecMgmtSnrThres2 The Signal to Noise (SNR) threshold. This object is applicable for modulation profile 2. Refer to ccsUpSpecMgmtCriteria on how ccsUpSpecMgmtSnrThres2 can trigger a change in frequency, modulation or ch…	dBInteger32r/w Constraints: range: 0-0 range: 5-35	.1.3.6.1.4.1.9.9.114.1.3.1.1.3
ccsUpSpecMgmtFecCorrectThres1 The Forward Error Correction (FEC) correctable count threshold. This object is applicable for profile 1. A value 0 indicates to bypass the threshold check. When CMTS detects that FEC corre…	Integer32r/w Constraints: range: 0-30	.1.3.6.1.4.1.9.9.114.1.3.1.1.4
ccsUpSpecMgmtFecCorrectThres2deprecated The FEC correctable count threshold. This object is applicable for profile 2. When CMTS detects that FEC correctable count goes higher than ccsUpSpecMgmtFecCorrectThres2, modulation change can occur, dep…	Integer32r/w Constraints: range: 1-20	.1.3.6.1.4.1.9.9.114.1.3.1.1.5
ccsUpSpecMgmtFecUnCorrectThres1 The FEC uncorrectable count threshold. This object is applicable for modulation profile 1. A value 0 indicates to bypass the threshold check. When CMTS detects that FEC uncorrectable count…	Integer32r/w Constraints: range: 0-30	.1.3.6.1.4.1.9.9.114.1.3.1.1.6
ccsUpSpecMgmtFecUnCorrectThres2 The FEC uncorrectable count threshold. This object is applicable for modulation profile 2. A value 0 indicates to bypass the threshold check. Refer to ccsUpSpecMgmtCriteria on how ccsUpSp…	Integer32r/w Constraints: range: 0-30	.1.3.6.1.4.1.9.9.114.1.3.1.1.7
ccsUpSpecMgmtSnrPollPerioddeprecated A period between SNR pollings. The SNR is collected from the Fast Fourier Transform (FFT) measurement over the in-use band when there is no CM signals. When the CMTS detects that SNR doesn't meet ccsUpSpe…	msecInteger32r/w Constraints: range: 500-25000	.1.3.6.1.4.1.9.9.114.1.3.1.1.8
ccsUpSpecMgmtHopConditiondeprecated A condition that triggers hopping. The SNR condition occurs when SNR does not meet the ccsUpSpecMgmtSnrThres1 or ccsUpSpecMgmtSnrThres2. The stationMaintainenceMiss condition occurs when th…	Enumeration Enumerated Values: 0 snr 1 stationMaintainenceMiss 2 others	.1.3.6.1.4.1.9.9.114.1.3.1.1.9
ccsUpSpecMgmtFromCenterFreq Center frequency before hopping occurs. A value 0 indicates that the interface has no frequency assigned.	KHzUnsigned32 Constraints: range: 0-0 range: 5000-65000	.1.3.6.1.4.1.9.9.114.1.3.1.1.10
ccsUpSpecMgmtToCenterFreq Current center frequency. A value 0 indicates that the interface has no frequency assigned.	KHzUnsigned32 Constraints: range: 5000-65000 range: 0-0	.1.3.6.1.4.1.9.9.114.1.3.1.1.11
ccsUpSpecMgmtFromBandWidth Bandwidth before hopping occurs.	KHzUnsigned32 Constraints: range: 200-200 range: 400-400 range: 800-800 range: 1600-1600 range: 3200-3200 range: 6400-6400	.1.3.6.1.4.1.9.9.114.1.3.1.1.12
ccsUpSpecMgmtToBandWidth Current bandwidth.	KHzUnsigned32 Constraints: range: 200-200 range: 400-400 range: 800-800 range: 1600-1600 range: 3200-3200 range: 6400-6400	.1.3.6.1.4.1.9.9.114.1.3.1.1.13
ccsUpSpecMgmtFromModProfile Modulation profile index before hopping occurs. It is the index identical to the docsIfModIndex in the docsIfCmtsModulationTable. For the detailed descriptions, see the docsIfCmtsModulationTable and docsI…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.9.114.1.3.1.1.14
ccsUpSpecMgmtToModProfile The current modulation profile index. It is the index identical to the docsIfModIndex in the docsIfCmtsModulationTable. For the detailed descriptions, see the docsIfCmtsModulationTable and docsIfCmtsModIn…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.9.114.1.3.1.1.15
ccsUpSpecMgmtSNR Current SNR. A value -99 indicates the system detected no modem on line, and a value of -100 indicates the system was unable to retrieve the SNR value.	dBInteger32 Constraints: range: -100-100	.1.3.6.1.4.1.9.9.114.1.3.1.1.16
ccsUpSpecMgmtUpperBoundFreq Upper bound frequency that the upstream supports.	KHzCCSFrequency Type Constraints: range: 5000..85000	.1.3.6.1.4.1.9.9.114.1.3.1.1.17
ccsUpSpecMgmtCnrThres1 The Carrier to Noise (CNR) threshold. This object is applicable for modulation profile 1. When the CMTS detects that the CNR goes lower than ccsUpSpecMgmtCnrThres1, it switches to profile …	dBInteger32r/w Constraints: range: 0-0 range: 5-35	.1.3.6.1.4.1.9.9.114.1.3.1.1.18
ccsUpSpecMgmtCnrThres2 The Carrier to Noise (CNR) threshold. This object is applicable for modulation profile 2. Refer to ccsUpSpecMgmtCriteria on how ccsUpSpecMgmtCnrThres2 can trigger a change in frequency, modulation or c…	dBInteger32r/w Constraints: range: 0-0 range: 5-35	.1.3.6.1.4.1.9.9.114.1.3.1.1.19
ccsUpSpecMgmtCNR Current CNR. A value -99 indicates the system detected no modem on line, and a value of -100 indicates the system was unable to retrieve the CNR value.	dBInteger32 Constraints: range: -100-100	.1.3.6.1.4.1.9.9.114.1.3.1.1.20
ccsUpSpecMgmtMissedMaintMsgThres The missed maintenance message threshold in percentage. A value 0 indicates that the interface has no spectrum group assigned. i.e. ccsUpSpecMgmtSpecGroup equals 0.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.9.9.114.1.3.1.1.21
ccsUpSpecMgmtHopPeriod The minimum time between frequency hops in seconds. A value 0 indicates that the interface has no spectrum group assigned. i.e. ccsUpSpecMgmtSpecGroup equals to 0.	secondsInteger32 Constraints: range: 0-3600	.1.3.6.1.4.1.9.9.114.1.3.1.1.22
ccsUpSpecMgmtCriteria Defines the criteria that trigger a change in frequency hopping, modulation or channel width. Depending on the type of linecards, the criteria are slightly different: For the linecards t…	Bits Enumerated Values: 0 snrBelowThres 1 cnrBelowThres 2 corrFecAboveThres 3 uncorrFecAboveThres 4 snrAboveThres 5 cnrAboveThres 6 corrFecBelowThres 7 uncorrFecBelowThres 8 noActiveModem 9 uncorrFecAboveSecondThres 10 others	.1.3.6.1.4.1.9.9.114.1.3.1.1.23
ccsUpSpecMgmtSpecGroup The spectrum group assigned to the upstream. The value of 0 for the object indicates that the upstream has no spectrum group assigned.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.114.1.3.1.1.24
ccsUpSpecMgmtSharedSpectrum The fiber-node assigned to the upstreams. Upstreams having same fiber-node number indicates that they physically combine together into same RF domain and must have unique frequency assigned. The value of 0 for the objec…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.114.1.3.1.1.25

This table contains the frequency and band configuration
of the spectrum group.

ccsSpecGroupFreqEntry row .1.3.6.1.4.1.9.9.114.1.3.2.1

An entry in ccsSpecGroupFreqTable. Each entry represents a
center frequency or a frequency band configured for the
spectrum group.

Indexes

ccsSpecGroupNumber ccsSpecGroupFreqIndex

Column	Syntax	OID
ccsSpecGroupFreqIndex An arbitrary index to uniquely identify frequencies or bands configured in spectrum group.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.114.1.3.2.1.1
ccsSpecGroupFreqType The type of the frequency configured in spectrum group. This is a mandatory object and can be modified when the row is active. If the value of centerFreq(1) is specified, the values of the corresponding instance of ccsS…	Enumerationr/w Enumerated Values: 1 centerFreq 2 bandFreq	.1.3.6.1.4.1.9.9.114.1.3.2.1.2
ccsSpecGroupFreqLower The lower frequency configured in spectrum group. This is a mandatory object and can be modified when the row is active. To configure a band frequency in the spectrum group, the value of this object must be lower than t…	HzInteger32r/w Constraints: range: 0-1000000000	.1.3.6.1.4.1.9.9.114.1.3.2.1.3
ccsSpecGroupFreqUpper The upper frequency configured in spectrum group. This is a mandatory object and can be modified when the row is active. To configure a band frequency in the spectrum group, the value of this object must be greater than…	HzInteger32r/w Constraints: range: 0-1000000000	.1.3.6.1.4.1.9.9.114.1.3.2.1.4
ccsSpecGroupStorage The storage type for this conceptual row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.114.1.3.2.1.5
ccsSpecGroupRowStatus The status of this conceptual row. This object is used for creating/deleting entries in ccsSpecGroupFreqTable. A conceptual row may not be created via SNMP without explicitly setting the value of ccsSpecG…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.114.1.3.2.1.6