BIANCA-BRICK-ADSL-MIB Table View

This table includes common attributes describing
far end (ATU-R) of the line.  It is required for all ADSL
physical interfaces.  ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).

adslLineEntry row .0.1.1.1.1

An entry in adslLineTable.

Indexes

adslLineIfIndex

Column	Syntax	OID
adslLineIfIndex Specifies the ADSL interface index used on this line.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.1.1.1
adslLineCoding Specifies the ADSL coding type used on this line.	Enumeration Enumerated Values: 1 other 2 dmt 3 cap 4 qam	.0.1.1.1.1.2
adslLineOpenMode Specifies the ADSL opening mode used on this line. Possible values: open (3): do not use adsl line, ansiT1dot413 (5): ANSI T1.413, gdmt (6): ADSL classic, G.DMT, ITU-T G.992.1 gliteg992dot2 (7): Splitterless ADSL, G.L…	Enumerationr/w Enumerated Values: 3 open 5 ansiT1dot413 6 gdmt 7 gliteg992dot2 8 multimode 9 adsl2 10 adsl2delt 11 adsl2plus 12 adsl2plusdelt 13 readsl2 14 readsl2delt 15 multimodeM 16 adsl2plusAnnexM 17 vdsl2 18 multimodeVdsl	.0.1.1.1.1.3
adslLineOperationalMode Current operational mode : unknown (1), ansiT1dot413 (2): ANSI T1.413, itug992dot1 (3): ADSL classic, G.DMT, ITU-T G.992.1, itug992dot2 (4): Splitterless ADSL, ITU-T G.992.2, adsl2 (5): G.DMT.Bis ITU-T G.992.3, adsl2del…	Enumeration Enumerated Values: 1 unknown 2 ansiT1dot413 3 itug992dot1 4 itug992dot2 5 adsl2 6 adsl2delt 7 adsl2plus 8 adsl2plusdelt 9 readsl2 10 readsl2delt 11 adsl2AnnexM 12 adsl2plusAnnexM 13 vdsl2 14 adsl2AnnexJ 15 adsl2plusAnnexJ 16 adsl2AnnexI 17 adsl2plusAnnexI	.0.1.1.1.1.4
adslLineTxGainOffset This parameter allows the user to add an offset to the Tx gain of the CPE of the modem. The offset range is limited between -10dB and +3dB. It is expressed in tenth dB with a granularity of 0.5dB. The default value is…	Integer32r/w Constraints: range: -100-30	.0.1.1.1.1.5
adslLineRxGainOffset This parameter allows the user to add an offset to the Rx gain of the CPE of the modem. The offset range is limited between -5dB and +3dB. It is expressed in tenth dB with a granularity of 0.5dB. The default value is …	Integer32r/w Constraints: range: -50-30	.0.1.1.1.1.6
adslLineType This parameter indicates the adsl line type.	Integer32r/w Constraints: range: 0-255	.0.1.1.1.1.7
adslLineMarginThreshold This parameter allows the user to specify a threshold for triggering a retrain, if the downstream margin drops below the threshold. The offset range is between -32dB and +31.5dB. It is expressed in tenth dB with a gran…	Integer32r/w Constraints: range: -320-315	.0.1.1.1.1.8
adslLineAnnexType This parameter allows the user to specify the used ADSL Annex type. annexA (1): use annex A for related adsl interface, annexB (2): use annex B for related adsl interface.	Enumerationr/w Enumerated Values: 1 annexA 2 annexB	.0.1.1.1.1.9
adslLineDyingGasp This parameter controls the behavior when the dying gasp condition is detected. The dying gasp condition is detected when the power input falls below a certain voltage level, eg. this happens when the ATUR is switched o…	Enumerationr/w Enumerated Values: 1 disable 2 enable	.0.1.1.1.1.10
adslLineBitSwapping This parameter controls the behavior of up- and downstream bit swapping. Setting the bit enables the bit swapping in the corresponding direction.	Bitsr/w Enumerated Values: 0 upstream 1 downstream	.0.1.1.1.1.11
adslLineProfile This parameter adapts the training behaviour, to comply with some special configurations used on some ADSL lines or during approval tests of their respective ADSL providers. The following values are common on all devic…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.0.1.1.1.1.13
adslLineCodingGainOffset This parameter allows the user to control the Coding Gain of the CPE of the modem. The coding gain range is limited between 0dB and 7dB, a value of -1 lets the CPE choose the coding gain itself. The coding gain is exp…	Integer32r/w Constraints: range: -1-7	.0.1.1.1.1.19
adslLineModemCapabilities This bitfield describes which open modes ADSL modem supports: annexA : The modem supports ADSL Annex A modes annexB : The modem supports ADSL Annex B modes multimodeM : To allow additional open mo…	Bits Enumerated Values: 0 annexA 1 annexB 2 multimodeM 3 vdsl2 4 multimodeVdsl	.0.1.1.1.1.20

This table provides one row for each ATUC.
Each row contains the Physical Layer Parameters
table for that ATUC. ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).

adslAtucPhysEntry row .0.1.1.2.1

An entry in the adslAtucPhysTable.

Indexes

adslAtucIfIndex

Column	Syntax	OID
adslAtucIfIndex Specifies the ADSL interface index.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.2.1.1
adslAtucInvVendorID The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters.	OctetString Constraints: range: 0-16	.0.1.1.2.1.2
adslAtucInvVersionNumber The vendor specific version number sent by this ATU as part of the initialization messages. It is a copy of the binary version number field defined by the PHY[10] and expressed as readable characters.	OctetString Constraints: range: 0-16	.0.1.1.2.1.3
adslAtucCurrStatus Indicates mandatory state of the ATUC line, i.e. the state of the line as seen by ATUC. This is a bit-map of possible conditions. The various bit positions are: 1 noDefect There no defec…	Enumeration Enumerated Values: 1 noDefect 2 lossOfFraming 3 lossOfSignal 4 lossOfPower 5 lossOfSignalQuality 6 lossOfLink 7 dataInitFailure 8 configInitFailure 9 protocolInitFailure 10 noPeerAtuPresent 11 lossOfCellDelineation	.0.1.1.2.1.4
adslAtucCurrOutputPwr Measured total output power transmitted by this ATU. This is the measurement that was reported during the last activation sequence in tenth dB.	Integer32 Constraints: range: -310-310	.0.1.1.2.1.5
adslAtucCurrAttainableRate Indicates the maximum mandatoryly attainable data rate by the ATU. This value will be equal or greater than the mandatory line rate.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.2.1.6
adslAtucCurrSnrMgn Noise Margin as seen by this ATU with respect to its received signal in tenth dB.	Integer32 Constraints: range: -640-640	.0.1.1.2.1.7
adslAtucCurrAtn Measured difference between the total power transmitted by the peer ATU and the total power received by this ATU in tenth dB.	Integer32 Constraints: range: 0-630	.0.1.1.2.1.8
adslAtucCurrPowercutback Indicates the powercutback by the ATU in tenth dB.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.2.1.9

This table provides one row for each ATUR
Each row contains the Physical Layer Parameters
table for that ATUR. ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).

adslAturPhysEntry row .0.1.1.3.1

An entry in the adslAturPhysTable.

Indexes

adslAturIfIndex

Column	Syntax	OID
adslAturIfIndex Specifies the ADSL interface index.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.3.1.1
adslAturInvSerialNumber The vendor specific string that identifies the vendor equipment.	OctetString Constraints: range: 0-32	.0.1.1.3.1.2
adslAturInvVendorID The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters.	OctetString Constraints: range: 0-16	.0.1.1.3.1.3
adslAturInvVersionNumber The vendor specific version number sent by this ATU as part of the initialization messages. It is a copy of the binary version number field defined by the PHY[10] and expressed as readable characters.	OctetString Constraints: range: 0-16	.0.1.1.3.1.4
adslAturCurrSnrMgn Noise Margin as seen by this ATU with respect to its received signal in tenth dB.	Integer32 Constraints: range: -640-640	.0.1.1.3.1.5
adslAturCurrAtn Measured difference between the total power transmitted by the peer ATU and the total power received by this ATU in tenth dB.	Integer32 Constraints: range: 0-630	.0.1.1.3.1.6
adslAturCurrStatus Indicates mandatory state of the ATUR line, i.e. the state of the line as seen by ATUR. This is a bit-map of possible conditions. Due to the isolation of the ATUR when line problems occur, many state conditions like l…	Enumeration Enumerated Values: 1 noDefect 2 lossOfFraming 3 lossOfSignal 4 lossOfPower 5 lossOfSignalQuality 6 lossOfCellDelineation	.0.1.1.3.1.7
adslAturCurrOutputPwr Measured total output power transmitted by this ATU. This is the measurement that was reported during the last activation sequence in tenth dB.	Integer32 Constraints: range: -310-310	.0.1.1.3.1.8
adslAturCurrAttainableRate Indicates the maximum mandatoryly attainable data rate by the ATU. This value will be equal or greater than the mandatory line rate.	Integer32r/w Constraints: range: 32000-2560000	.0.1.1.3.1.9
adslAturCurrPowercutback Indicates the powercutback by the ATU in tenth dB.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.3.1.10

This table provides one row for each ATUC channel.
ADSL channel interfaces are those ifEntries
where ifType is equal to adslInterleave(124)
or adslFast(125).

adslAtucChanEntry row .0.1.1.4.1

An entry in the adslAtucChanTable.

Indexes

adslAtucChanIfIndex

Column	Syntax	OID
adslAtucChanIfIndex Specifies the ADSL interface index.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.4.1.1
adslAtucChanInterleaveDelay Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their plac…	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.4.1.2
adslAtucChanCurrTxRate Actual transmit rate on this channel.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.4.1.3
adslAtucChanPrevTxRate The rate at the time of the last adslAtucRateChangeTrap event. It is also set at initialization to prevent a trap being sent. Rate changes less than adslAtucThresh(*)RateDown or less than adslAtucThresh(*…	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.4.1.4
adslAtucChanInterleaveDepth The interleaver depth.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.4.1.5

This table provides one row for each ATUR channel.
ADSL channel interfaces are those ifEntries
where ifType is equal to adslInterleave(124)
or adslFast(125).

adslAturChanEntry row .0.1.1.5.1

An entry in the adslAturChanTable.

Indexes

adslAturChanIfIndex

Column	Syntax	OID
adslAturChanIfIndex Specifies the ADSL interface index.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.5.1.1
adslAturChanInterleaveDelay Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their plac…	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.5.1.2
adslAturChanCurrTxRate Actual transmit rate on this channel.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.5.1.3
adslAturChanPrevTxRate The rate at the time of the last adslAturRateChangeTrap event. It is also set at initialization to prevent a trap being sent. Rate changes less than adslAturThresh(*)RateDown or less than adslAturThresh(*)RateUp will no…	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.5.1.4
adslAturChanCrcBlockLength Indicates the length of the channel data-block on which the CRC operates. Refer to Line Code Specific MIBs, [11] and [12] for more information.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.5.1.5
adslAturChanInterleaveDepth The interleaver depth.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.5.1.6

This table provides one row for each ATUR.
ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).

adslAturPerfDataEntry row .0.1.1.7.1

An entry in adslAturPerfDataTable.

Indexes

adslAturPerfIfIndex

Column	Syntax	OID
adslAturPerfIfIndex Specifies the ADSL interface index.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.7.1.1
adslAturPerfLofs Count of the number of Loss of Framing failures since agent reset.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.7.1.2
adslAturPerfLoss Count of the number of Loss of Signal failures since agent reset.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.7.1.3
adslAturPerfLprs Count of the number of Loss of Power failures since agent reset.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.7.1.4
adslAturPerfESs Count of the number of Errored Seconds since agent reset. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.7.1.5
adslAturPerfValidIntervals The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The value will be <n> unless the measurement was (re-)started withi…	Integer32 Constraints: range: 0-96	.0.1.1.7.1.6
adslAturPerfInvalidIntervals The number of intervals in the range from 0 to the value of adslAturPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not availab…	Integer32 Constraints: range: 0-96	.0.1.1.7.1.7
adslAturPerfCurr15MinTimeElapsed Total elapsed seconds in this interval.	Integer32 Constraints: range: 0-899	.0.1.1.7.1.8
adslAturPerfCurr15MinLofs Count of seconds in the mandatory 15 minute interval when there was Loss of Framing.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.7.1.9
adslAturPerfCurr15MinLoss Count of seconds in the mandatory 15 minute interval when there was Loss of Signal.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.7.1.10
adslAturPerfCurr15MinLprs Count of seconds in the mandatory 15 minute interval when there was Loss of Power.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.7.1.11
adslAturPerfCurr15MinESs Count of Errored Seconds in the mandatory 15 minute interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.7.1.12
adslAturPerfCurr1DayTimeElapsed Number of seconds that have elapsed since the beginning of the mandatory 1-day interval.	Integer32 Constraints: range: 0-86399	.0.1.1.7.1.13
adslAturPerfCurr1DayLofs Count of the number of seconds when there was Loss of Framing during the mandatory day as measured by adslAturPerfCurr1DayTimeElapsed.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.7.1.14
adslAturPerfCurr1DayLoss Count of the number of seconds when there was Loss of Signal during the mandatory day as measured by adslAturPerfCurr1DayTimeElapsed.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.7.1.15
adslAturPerfCurr1DayLprs Count of the number of seconds when there was Loss of Power during the mandatory day as measured by adslAturPerfCurr1DayTimeElapsed.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.7.1.16
adslAturPerfCurr1DayESs Count of Errored Seconds during the mandatory day as measured by adslAturPerfCurr1DayTimeElapsed. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los …	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.7.1.17
adslAturPerfPrev1DayMoniSecs The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monit…	Integer32 Constraints: range: 0-86400	.0.1.1.7.1.18
adslAturPerfPrev1DayLofs Count of seconds in the interval when there was Loss of Framing within the most recent previous 1-day period.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.7.1.19
adslAturPerfPrev1DayLoss Count of seconds in the interval when there was Loss of Signal within the most recent previous 1-day period.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.7.1.20
adslAturPerfPrev1DayLprs Count of seconds in the interval when there was Loss of Power within the most recent previous 1-day period.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.7.1.21
adslAturPerfPrev1DayESs Count of Errored Seconds within the most recent previous 1-day period. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.7.1.22

This table provides one row for each ATUR channel.
ADSL channel interfaces are those ifEntries
where ifType is equal to adslInterleave(124)
or adslFast(125).

adslAturChanPerfDataEntry row .0.1.1.11.1

An entry in adslAturChanPerfDataTable.

Indexes

adslAturChanPerfIfIndex

Column	Syntax	OID
adslAturChanPerfIfIndex Specifies the ADSL interface index.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.11.1.1
adslAturChanReceivedBlks Count of all encoded blocks received on this channel since agent reset.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.11.1.2
adslAturChanTransmittedBlks Count of all encoded blocks transmitted on this channel since agent reset.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.11.1.3
adslAturChanCorrectedBlks Count of all blocks received with errors that were corrected since agent reset. These blocks are passed on as good data.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.11.1.4
adslAturChanUncorrectBlks Count of all blocks received with uncorrectable errors since agent reset.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.11.1.5
adslAturChanPerfValidIntervals The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The value will be <n> unless the measurement was (re-)started withi…	Integer32 Constraints: range: 0-96	.0.1.1.11.1.6
adslAturChanPerfInvalidIntervals The number of intervals in the range from 0 to the value of adslAturChanPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not ava…	Integer32 Constraints: range: 0-96	.0.1.1.11.1.7
adslAturChanPerfCurr15MinTimeElapsed Total elapsed seconds in this interval. A full interval is 900 seconds.	Integer32 Constraints: range: 0-899	.0.1.1.11.1.8
adslAturChanPerfCurr15MinReceivedBlks Count of all encoded blocks received on this channel within the mandatory 15 minute interval.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.11.1.9
adslAturChanPerfCurr15MinTransmittedBlks Count of all encoded blocks transmitted on this channel within the mandatory 15 minute interval.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.11.1.10
adslAturChanPerfCurr15MinCorrectedBlks Count of all blocks received with errors that were corrected on this channel within the mandatory 15 minute interval.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.11.1.11
adslAturChanPerfCurr15MinUncorrectBlks Count of all blocks received with uncorrectable errors on this channel within the mandatory 15 minute interval.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.11.1.12
adslAturChanPerfCurr1DayTimeElapsed Number of seconds that have elapsed since the beginning of the mandatory 1-day interval.	Integer32 Constraints: range: 0-86399	.0.1.1.11.1.13
adslAturChanPerfCurr1DayReceivedBlks Count of all encoded blocks received on this channel during the mandatory day as measured by adslAturChanPerfCurr1DayTimeElapsed.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.11.1.14
adslAturChanPerfCurr1DayTransmittedBlks Count of all encoded blocks transmitted on this channel during the mandatory day as measured by adslAturChanPerfCurr1DayTimeElapsed.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.11.1.15
adslAturChanPerfCurr1DayCorrectedBlks Count of all blocks received with errors that were corrected on this channel during the mandatory day as measured by adslAturChanPerfCurr1DayTimeElapsed.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.11.1.16
adslAturChanPerfCurr1DayUncorrectBlks Count of all blocks received with uncorrectable errors on this channel during the mandatory day as measured by adslAturChanPerfCurr1DayTimeElapsed.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.11.1.17
adslAturChanPerfPrev1DayMoniSecs The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monit…	Integer32 Constraints: range: 0-86400	.0.1.1.11.1.18
adslAturChanPerfPrev1DayReceivedBlks Count of all encoded blocks received on this channel within the most recent previous 1-day period.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.11.1.19
adslAturChanPerfPrev1DayTransmittedBlks Count of all encoded blocks transmitted on this channel within the most recent previous 1-day period.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.11.1.20
adslAturChanPerfPrev1DayCorrectedBlks Count of all blocks received with errors that were corrected on this channel within the most recent previous 1-day period.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.11.1.21
adslAturChanPerfPrev1DayUncorrectBlks Count of all blocks received with uncorrectable errors on this channel within the most recent previous 1-day period.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.11.1.22

This table provides one row for each ATUC.
ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).

adslAtucPerfDataEntry row .0.1.1.12.1

An entry in adslAtucPerfDataTable.

Indexes

adslAtucPerfIfIndex

Column	Syntax	OID
adslAtucPerfIfIndex Specifies the ADSL interface index.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.12.1.1
adslAtucPerfLofs Count of the number of Loss of Framing failures since agent reset.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.12.1.2
adslAtucPerfLoss Count of the number of Loss of Signal failures since agent reset.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.12.1.3
adslAtucPerfLprs Count of the number of Loss of Power failures since agent reset.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.12.1.4
adslAtucPerfESs Count of the number of Errored Seconds since agent reset. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.12.1.5
adslAtucPerfValidIntervals The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The value will be <n> unless the measurement was (re-)started withi…	Integer32 Constraints: range: 0-96	.0.1.1.12.1.6
adslAtucPerfInvalidIntervals The number of intervals in the range from 0 to the value of adslAtucPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not availab…	Integer32 Constraints: range: 0-96	.0.1.1.12.1.7
adslAtucPerfCurr15MinTimeElapsed Total elapsed seconds in this interval.	Integer32 Constraints: range: 0-899	.0.1.1.12.1.8
adslAtucPerfCurr15MinLofs Count of seconds in the mandatory 15 minute interval when there was Loss of Framing.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.12.1.9
adslAtucPerfCurr15MinLoss Count of seconds in the mandatory 15 minute interval when there was Loss of Signal.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.12.1.10
adslAtucPerfCurr15MinLprs Count of seconds in the mandatory 15 minute interval when there was Loss of Power.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.12.1.11
adslAtucPerfCurr15MinESs Count of Errored Seconds in the mandatory 15 minute interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.12.1.12
adslAtucPerfCurr1DayTimeElapsed Number of seconds that have elapsed since the beginning of the mandatory 1-day interval.	Integer32 Constraints: range: 0-86399	.0.1.1.12.1.13
adslAtucPerfCurr1DayLofs Count of the number of seconds when there was Loss of Framing during the mandatory day as measured by adslAtucPerfCurr1DayTimeElapsed.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.12.1.14
adslAtucPerfCurr1DayLoss Count of the number of seconds when there was Loss of Signal during the mandatory day as measured by adslAtucPerfCurr1DayTimeElapsed.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.12.1.15
adslAtucPerfCurr1DayLprs Count of the number of seconds when there was Loss of Power during the mandatory day as measured by adslAtucPerfCurr1DayTimeElapsed.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.12.1.16
adslAtucPerfCurr1DayESs Count of Errored Seconds during the mandatory day as measured by adslAtucPerfCurr1DayTimeElapsed. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los …	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.12.1.17
adslAtucPerfPrev1DayMoniSecs The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monit…	Integer32 Constraints: range: 0-86400	.0.1.1.12.1.18
adslAtucPerfPrev1DayLofs Count of seconds in the interval when there was Loss of Framing within the most recent previous 1-day period.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.12.1.19
adslAtucPerfPrev1DayLoss Count of seconds in the interval when there was Loss of Signal within the most recent previous 1-day period.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.12.1.20
adslAtucPerfPrev1DayLprs Count of seconds in the interval when there was Loss of Power within the most recent previous 1-day period.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.12.1.21
adslAtucPerfPrev1DayESs Count of Errored Seconds within the most recent previous 1-day period. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.12.1.22

This table provides one row for each ATUR channel.
ADSL channel interfaces are those ifEntries
where ifType is equal to adslInterleave(124)
or adslFast(125).

adslAtucChanPerfDataEntry row .0.1.1.13.1

An entry in adslAtucChanPerfDataTable.

Indexes

adslAtucChanPerfIfIndex

Column	Syntax	OID
adslAtucChanPerfIfIndex Specifies the ADSL interface index.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.13.1.1
adslAtucChanReceivedBlks Count of all encoded blocks received on this channel since agent reset.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.13.1.2
adslAtucChanTransmittedBlks Count of all encoded blocks transmitted on this channel since agent reset.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.13.1.3
adslAtucChanCorrectedBlks Count of all blocks received with errors that were corrected since agent reset. These blocks are passed on as good data.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.13.1.4
adslAtucChanUncorrectBlks Count of all blocks received with uncorrectable errors since agent reset.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.13.1.5
adslAtucChanPerfValidIntervals The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The value will be <n> unless the measurement was (re-)started withi…	Integer32 Constraints: range: 0-96	.0.1.1.13.1.6
adslAtucChanPerfInvalidIntervals The number of intervals in the range from 0 to the value of adslAtucChanPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not ava…	Integer32 Constraints: range: 0-96	.0.1.1.13.1.7
adslAtucChanPerfCurr15MinTimeElapsed Total elapsed seconds in this interval. A full interval is 900 seconds.	Integer32 Constraints: range: 0-899	.0.1.1.13.1.8
adslAtucChanPerfCurr15MinReceivedBlks Count of all encoded blocks received on this channel within the mandatory 15 minute interval.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.13.1.9
adslAtucChanPerfCurr15MinTransmittedBlks Count of all encoded blocks transmitted on this channel within the mandatory 15 minute interval.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.13.1.10
adslAtucChanPerfCurr15MinCorrectedBlks Count of all blocks received with errors that were corrected on this channel within the mandatory 15 minute interval.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.13.1.11
adslAtucChanPerfCurr15MinUncorrectBlks Count of all blocks received with uncorrectable errors on this channel within the mandatory 15 minute interval.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.13.1.12
adslAtucChanPerfCurr1DayTimeElapsed Number of seconds that have elapsed since the beginning of the mandatory 1-day interval.	Integer32 Constraints: range: 0-86399	.0.1.1.13.1.13
adslAtucChanPerfCurr1DayReceivedBlks Count of all encoded blocks received on this channel during the mandatory day as measured by adslAtucChanPerfCurr1DayTimeElapsed.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.13.1.14
adslAtucChanPerfCurr1DayTransmittedBlks Count of all encoded blocks transmitted on this channel during the mandatory day as measured by adslAtucChanPerfCurr1DayTimeElapsed.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.13.1.15
adslAtucChanPerfCurr1DayCorrectedBlks Count of all blocks received with errors that were corrected on this channel during the mandatory day as measured by adslAtucChanPerfCurr1DayTimeElapsed.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.13.1.16
adslAtucChanPerfCurr1DayUncorrectBlks Count of all blocks received with uncorrectable errors on this channel during the mandatory day as measured by adslAtucChanPerfCurr1DayTimeElapsed.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.13.1.17
adslAtucChanPerfPrev1DayMoniSecs The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monit…	Integer32 Constraints: range: 0-86400	.0.1.1.13.1.18
adslAtucChanPerfPrev1DayReceivedBlks Count of all encoded blocks received on this channel within the most recent previous 1-day period.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.13.1.19
adslAtucChanPerfPrev1DayTransmittedBlks Count of all encoded blocks transmitted on this channel within the most recent previous 1-day period.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.13.1.20
adslAtucChanPerfPrev1DayCorrectedBlks Count of all blocks received with errors that were corrected on this channel within the most recent previous 1-day period.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.13.1.21
adslAtucChanPerfPrev1DayUncorrectBlks Count of all blocks received with uncorrectable errors on this channel within the most recent previous 1-day period.	Integer32 Type Constraints: range: -2147483648..2147483647	.0.1.1.13.1.22