adslLineOperationalMode
BIANCA-BRICK-ADSL-MIB ·
.0.1.1.1.1.4
Object
column
Enumeration
Current operational mode : unknown (1), ansiT1dot413 (2): ANSI T1.413, itug992dot1 (3): ADSL classic, G.DMT, ITU-T G.992.1, itug992dot2 (4): Splitterless ADSL, ITU-T G.992.2, adsl2 (5): G.DMT.Bis ITU-T G.992.3, adsl2delt (6): ADSL2 Double Ended Line Test, adsl2plus (7): ADSL2 Plus, ITU-T G.992.5, adsl2plusdelt (8): ADSL2 Plus Double Ended Line Test, readsl2 (9): Reach Extended ADSL2, readsl2delt (10): Reach Extended ADSL2 Double Ended Line Test, adsl2AnnexM (11): ADSL2 ITU-T G.992.3 Annex M, adsl2plusAnnexM (12): ADSL2+ ITU-T G.992.5 Annex M, vdsl2 (13): VDSL2, ITU-T G.993.2 adsl2AnnexJ(14): ADSL2 ITU-T G.992.3 J, adsl2plusAnnexJ(15): ADSL2+ ITU-T G.992.5 J, adsl2AnnexI(16): ADSL2 ITU-T G.992.3 I, adsl2plusAnnexI(17): ADSL2+ ITU-T G.992.5 I
Context
- MIB
- BIANCA-BRICK-ADSL-MIB
- OID
.0.1.1.1.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- adslLineEntry
- Table
- adslLineTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | unknown |
2 | ansiT1dot413 |
3 | itug992dot1 |
4 | itug992dot2 |
5 | adsl2 |
6 | adsl2delt |
7 | adsl2plus |
8 | adsl2plusdelt |
9 | readsl2 |
10 | readsl2delt |
11 | adsl2AnnexM |
12 | adsl2plusAnnexM |
13 | vdsl2 |
14 | adsl2AnnexJ |
15 | adsl2plusAnnexJ |
16 | adsl2AnnexI |
17 | adsl2plusAnnexI |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adslLineIfIndex Specifies the ADSL interface index used on this line. | column | Integer32 | .0.1.1.1.1.1 |
| adslLineDyingGasp This parameter controls the behavior when the dying gasp condition
is detected. The dying gasp condition is detected when the power
input falls below a certain voltage level, eg. … | column | Enumeration | .0.1.1.1.1.10 |
| adslLineBitSwapping This parameter controls the behavior of up- and downstream bit swapping.
Setting the bit enables the bit swapping in the corresponding direction. | column | Bits | .0.1.1.1.1.11 |
| adslLineProfile This parameter adapts the training behaviour, to comply with some
special configurations used on some ADSL lines or during approval
tests of their respective ADSL providers.
The … | column | Integer32 | .0.1.1.1.1.13 |
| adslLineCodingGainOffset This parameter allows the user to control the Coding Gain
of the CPE of the modem.
The coding gain range is limited between 0dB and 7dB, a value
of -1 lets the CPE choose the co… | column | Integer32 | .0.1.1.1.1.19 |
| adslLineCoding Specifies the ADSL coding type used on this line. | column | Enumeration | .0.1.1.1.1.2 |
| adslLineModemCapabilities This bitfield describes which open modes ADSL modem supports:
annexA : The modem supports ADSL Annex A modes
annexB : The modem supports ADSL Annex B modes
multi… | column | Bits | .0.1.1.1.1.20 |
| adslLineOpenMode Specifies the ADSL opening mode used on this line. Possible values:
open (3): do not use adsl line,
ansiT1dot413 (5): ANSI T1.413,
gdmt (6): ADSL classic, G.DMT, ITU-T G.992.1
g… | column | Enumeration | .0.1.1.1.1.3 |
| adslLineTxGainOffset This parameter allows the user to add an offset to the Tx gain
of the CPE of the modem.
The offset range is limited between -10dB and +3dB.
It is expressed in tenth dB with a gr… | column | Integer32 | .0.1.1.1.1.5 |
| adslLineRxGainOffset This parameter allows the user to add an offset to the Rx gain
of the CPE of the modem.
The offset range is limited between -5dB and +3dB.
It is expressed in tenth dB with a gra… | column | Integer32 | .0.1.1.1.1.6 |
| adslLineType This parameter indicates the adsl line type. | column | Integer32 | .0.1.1.1.1.7 |
| adslLineMarginThreshold This parameter allows the user to specify a threshold
for triggering a retrain, if the downstream margin drops
below the threshold.
The offset range is between -32dB and +31.5dB. … | column | Integer32 | .0.1.1.1.1.8 |
| adslLineAnnexType This parameter allows the user to specify the used ADSL Annex type.
annexA (1): use annex A for related adsl interface,
annexB (2): use annex B for related adsl interface. | column | Enumeration | .0.1.1.1.1.9 |