ASAM-SFP-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
16
Rows
16
Columns
208
.1.3.6.1.4.1.637.61.1.56.1
·
1 row entry
·
2 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk hostSfpConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-SFP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-SFP-MIB::hostSfpConfigTable'
This table contains the host shelf SFP direction configuration information. ALCATEL NOTE: TABLESIZE: 8
Each entry consists of a list of host shelf SFP configuration parameters.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
hostConfigSfpFaceplateNumbermandatory
This is host shelf SFP number on the faceplate.
ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 1..17 DEFVALUE: NA UNITS: NA SPARSE: NO DESCR: NA |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.1.1.1 |
||||
|
hostSfpDirectionmandatory
The host shelf SFP can be configured as downlink or uplink. The default
is uplink. ALCATEL NOTE: ACCESS: NA USAGE: OPT PERSIST: YES INSRVMOD: YES RANGE: NA DEFVALUE: uplink UNITS: NA SPARSE: N… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.1.1.2 |
.1.3.6.1.4.1.637.61.1.56.2
·
1 row entry
·
4 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk hostSfpConfigExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-SFP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-SFP-MIB::hostSfpConfigExtTable'
This table contains the host shelf SFP configuration information additional to the host SFP direction configuration. WARNING This table is now deprecated. ltHostSfpConfigExtTable should be used instead. ALCATEL NOTE: TABLESIZE: 24
Each entry consists of a list of host shelf SFP configuration
parameters which supplements the parameters in hostSfpConfigTable.
WARNING This table is now deprecated. ltHostSfpConfigExtTable should be used instead.
parameters which supplements the parameters in hostSfpConfigTable.
WARNING This table is now deprecated. ltHostSfpConfigExtTable should be used instead.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
hostConfigExtSfpFaceplateNumbermandatory
This is the host shelf SFP number on the faceplate.
WARNING This table is now deprecated. ltHostSfpConfigExtTable should be used instead. ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: YES INSRVMOD: NA … |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.2.1.1 |
|
hostSfpCableToRackmandatory
This is the Rack ID of the expansion shelf LSM which the host shelf SFP
is planned to cable to. Value 0 means that no rack is specified. WARNING This table is now deprecated. ltHostSfpConfigExtTable should be used inste… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.2.1.2 |
|
hostSfpCableToShelfmandatory
This is the Shelf ID of the expansion shelf LSM which
the host shelf SFP is planned to cable to. Value 0 means that no shelf is specified. WARNING This table is now deprecated. ltHostSfpConfigExtTable should be used ins… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.2.1.3 |
|
hostSfpCableToSlotmandatory
This is the Slot ID of the expansion shelf LSM which
the host shelf SFP is planned to cable to. Value 0 means that no slot is specified. WARNING This table is now deprecated. ltHostSfpConfigExtTable should be used inste… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.2.1.4 |
.1.3.6.1.4.1.637.61.1.56.3
·
1 row entry
·
9 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk hostSfpStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-SFP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-SFP-MIB::hostSfpStatusTable'
This table contains the host shelf SFP or XFP status information.
WARNING This table is now deprecated. ltHostSfpStatusTable should be used instead.
ALCATEL NOTE:
TABLESIZE: 26
Each entry consists of a list of SFP or XFP status parameters.
WARNING This table is now deprecated. ltHostSfpStatusTable should be used instead.
WARNING This table is now deprecated. ltHostSfpStatusTable should be used instead.
Indexes
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hostStatusSfpFaceplateNumbermandatory
This is the host shelf SFP or XFP cage number.
For an SFP cage, it is the faceplate number of the SFP cage (e.g. 1). For an XFP cage, it is 256 + (the faceplate number of the XFP cage). For example, if the XFP cage has… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.3.1.1 |
||||||||||||||||||||
|
lanxPortNumbermandatory
This is the Physical LANX or IHUB port to which the SFP or XFP is
connected to. For an SHUB system, the lanxPortNumber here corresponds to lanxInterfaceIndex in the LANX MIB. For an IHUB system, the lanxPortNumber to… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.3.1.2 |
||||||||||||||||||||
|
hostSfpDownlinkStatusmandatory
This is the host shelf SFP or XFP status.
ok (1): The SFP or XFP is operational. sfpNotPresent (2): The SFP or XFP cage is empty. los (3): The SFP or XFP has detected Loss… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.3.1.3 |
||||||||||||||||||||
|
hostSfpCabledToRackmandatory
This is the Rack ID of the expansion shelf LSM to which the host shelf SFP
is cabled to. Value 0 means that SFP is not cabled to any expansion shelf LSM. WARNING This table is now deprecated. ltHostSfpStatusTable should… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.3.1.4 |
||||||||||||||||||||
|
hostSfpCabledToShelfmandatory
This is the Shelf ID of the expansion shelf LSM which the host shelf
SFP is cabled to. Value 0 means that SFP is not cabled to any expansion shelf LSM. WARNING This table is now deprecated. ltHostSfpStatusTable should … |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.3.1.5 |
||||||||||||||||||||
|
hostSfpCabledToSlotmandatory
This is the Slot ID of the expansion shelf LSM which the host shelf SFP
is cabled to. Value 0 means that SFP is not cabled to any expansion shelf LSM. WARNING This table is now deprecated. ltHostSfpStatusTable should b… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.3.1.6 |
||||||||||||||||||||
|
hostSfpTypemandatory
This variable indicates the type of the SFP or XFP, as read from the
device. It is a bitmap represented as a sum, therefore, it can represent multiple types (combination of types) simultaneously. The SFP type bits (0..… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.3.1.7 |
||||||||||||||||||||
|
hostSfpCablingMismatchmandatory
This is the host shelf SFP cabling mismatch status:
noMismatch(1): no cabling mismatch is detected. unexpectedRemoteLt(2): a remote LT is detected at an unassigned downlink SFP po… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.3.1.8 |
||||||||||||||||||||
|
hostSfpCabledToPhysAddressmandatory
The physical (MAC) address of the remote interface that is
cabled to this host shelf SFP. If the remote interface does not have such an address or the address is not yet discovered, this object would contain an octet st… |
RFC1213-MIBPhysAddress | .1.3.6.1.4.1.637.61.1.56.3.1.9 |
.1.3.6.1.4.1.637.61.1.56.4
·
1 row entry
·
7 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk expSfpStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-SFP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-SFP-MIB::expSfpStatusTable'
This table contains the expansion shelf SFP status information.
ALCATEL NOTE:
TABLESIZE: 312 (24 + 288)
Each entry consists of the expansion shelf SFP status.
Indexes
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
expSfpRackmandatory
This is the Rack ID of the expansion shelf SFP (actually its
corresponding LSM). ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 1..7 DEFVALUE: NA UNITS: NA SPARSE: NO DE… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.4.1.1 |
||||||||||||||||
|
expSfpShelfmandatory
This is the Shelf ID of the expansion shelf SFP (actually
its corresponding LSM). ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 1..4 DEFVALUE: NA UNITS: NA SPARSE: NO D… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.4.1.2 |
||||||||||||||||
|
expSfpSlotmandatory
This is the Slot ID of the expansion shelf SFP (actually its
corresponding LSM). ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: DEP / depends on the shelf type. DEFVALUE: NA U… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.4.1.3 |
||||||||||||||||
|
expSfpStatusmandatory
This is the status of the expansion shelf SFP:
ok (1): the expansion shelf SFP is operational. sfpNotPresent (2): no SFP present. los (3): LOS is detected by the expansion shelf SFP. … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.4.1.4 |
||||||||||||||||
|
hostSfpFaceplateNumbermandatory
This is the faceplate number of the host shelf SFP which the expansion
shelf SFP is cabled to. If an expansion shelf SFP is not cabled to any host shelf SFP, the value of the corresponding hostSfpFaceplateNumber is set … |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.4.1.5 |
||||||||||||||||
|
expSfpTypemandatory
This variable indicates the type of the SFP. It is a bitmap represented
as a sum, therefore, it can represent multiple types (combination of types) simultaneously. The various bit positions are: bit 0 (1): 1000BASE… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.4.1.6 |
||||||||||||||||
|
hostSfpLogSlotIdmandatory
This is the LogSlotId of the host LT which the expansion
shelf SFP is cabled to. If an expansion shelf SFP is not cabled to any host shelf SFP, the value of the corresponding hostSfpLogSlotId is set to 0. ALCATEL NOTE: … |
ASAM-EQUIP-MIBEqptSlotIndex Type Constraints: range: 1..65535 |
.1.3.6.1.4.1.637.61.1.56.4.1.7 |
.1.3.6.1.4.1.637.61.1.56.5
·
1 row entry
·
53 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk sfpDiagTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-SFP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-SFP-MIB::sfpDiagTable'
The primary purpose of this read-only table: allow the SNMP
manager to read real-time diagnostic measurements (e.g. the
SFP's received optical power level) from the A2 bank of a
manager-specified SFP. The A2 bank and content are defined in
the SFF-8472 standard (available at ftp.seagate.com).
The table is indexed to allow support for any SFP cage in
the system.
In a particular release, SFP diagnostics support for a
particular assembly may or may not be provided, and support for
all the cages on a supported assembly may or may not be
provided. If an assembly has any supported SFP cages, a row will be
present in this table for each of its SFP cages.
A row is present whether or not the SFP cage contains an SFP,
and whether or not the SFP supports diagnostics. If the SFP
cage contains an SFP, some status information (e.g. LOS and
TxFault status) is available in the row. An enumerated object
(sfpDiagAvailable) is used to indicate the condition/error
(or no error) encountered when attempting to read the
diagnostics information for the specified cage (e.g. cage
empty, or A2 checksum failed).
Details are documented with the individual objects.
The following table size field is set to 'not applicable',
since it does not make sense for the SNMP manager to cache the
values in this table. The values will be different each time
they are read from agent.
ALCATEL NOTE:
TABLESIZE: NA
DESCR: NA
The index for the sfpDiagTable identifies an SFP cage
using two fields: the logicalSlotId of the card associated
with the SFP cage (normally the card with the cages on its
faceplate), and the SFP cage number.
using two fields: the logicalSlotId of the card associated
with the SFP cage (normally the card with the cages on its
faceplate), and the SFP cage number.
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
sfpDiagLogicalSlotmandatory
This is the first index of the sfpDiagTable.
Normally, this object contains the Logical Slot ID (as defined in the Equipment MIB) of the card which has the SFP cage of interest on its faceplate. If that… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.5.1.1 |
||||||||||||||||||
|
sfpDiagSfpFaceplateNumbermandatory
This is the second index of the sfpDiagTable.
It is the number of the SFP cage, as shown on the card faceplate. If the faceplate cage number is zero, sfpDiagSfpFaceplateNumber=0 is used (i.e. zero is not a special c… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.5.1.2 |
||||||||||||||||||
|
sfpDiagAvailablemandatory
A column in the sfpDiagTable, with the following code points.
noError - valid values for all objects in this row (e.g. sfpDiagRxPower) were obtained from the SFP in the specified cage. cageDoesNotSu… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.5.1.3 |
||||||||||||||||||
|
sfpDiagLOSmandatory
A column in the sfpDiagTable, with the following code
points. los - the SFP in the specified SFP cage has detected Loss of Signal (on its receiver). noLos - the SFP in the specified SFP cage has detec… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.5.1.4 |
||||||||||||||||||
|
sfpDiagTxFaultmandatory
A column in the sfpDiagTable, with the following code
points. txFault - the SFP in the specified SFP cage has detected a TxFault error (as defined in SFF-8472). noTxFault - the SFP in the specified SF… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.5.1.5 |
||||||||||||||||||
|
sfpDiagTxPowermandatory
A column in the sfpDiagTable, containing the freshly-measured
transmit power of the specified SFP, encoded into a string. Five types of values are supported. In the following text, strings are enclosed… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.6 |
||||||||||||||||||
|
sfpDiagRxPowermandatory
A column in the sfpDiagTable, containing the freshly-measured
received power of the specified SFP, encoded into a string. Five types of values are supported. In the following text, strings are enclosed… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.7 |
||||||||||||||||||
|
sfpDiagTxBiasCurrentmandatory
A column in the sfpDiagTable, containing the freshly-measured
transmit bias current of the specified SFP, encoded into a string. Four types of values are supported. In the following text, strings are … |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.8 |
||||||||||||||||||
|
sfpDiagSupplyVoltagemandatory
A column in the sfpDiagTable, containing the freshly-measured
supply voltage of the specified SFP, encoded into a string. Three types of values are supported. In the following text, strings are enclose… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.9 |
||||||||||||||||||
|
sfpDiagTemperaturemandatory
A column in the sfpDiagTable, containing the freshly-measured
temperature of the specified SFP, encoded into a string. Two types of values are supported. In the following text, strings are enclosed in … |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.10 |
||||||||||||||||||
|
sfpDiagTCAStatusTemperaturemandatory
A column in the sfpDiagTable, containing the freshly-measured temperature
alarm/warning threshold crossing status of the specified SFP/SFP+/XFP/CFP4. ALCATEL NOTE: ACCESS: RO USAGE: NA PE… |
SfpDiagTCAStatus Type Values:
|
.1.3.6.1.4.1.637.61.1.56.5.1.11 |
||||||||||||||||||
|
sfpDiagTCAStatusVoltagemandatory
A column in the sfpDiagTable, containing the freshly-measured voltage
alarm/warning threshold crossing status of the specified SFP/SFP+/XFP/CFP4. For XFP, this parameter will display as NotAvailable in case it is not … |
SfpDiagTCAStatus Type Values:
|
.1.3.6.1.4.1.637.61.1.56.5.1.12 |
||||||||||||||||||
|
sfpDiagTCAStatusBiasCurrentmandatory
A column in the sfpDiagTable, containing the freshly-measured bias current
alarm/warning threshold crossing status of the specified SFP/SFP+/XFP/CFP4. ALCATEL NOTE: ACCESS: RO USAGE: NA P… |
SfpDiagTCAStatus Type Values:
|
.1.3.6.1.4.1.637.61.1.56.5.1.13 |
||||||||||||||||||
|
sfpDiagTCAStatusTxPowermandatory
A column in the sfpDiagTable, containing the freshly-measured received
power alarm/warning threshold crossing status of the specified SFP/SFP+/XFP/CFP4. ALCATEL NOTE: ACCESS: RO USAGE: NA … |
SfpDiagTCAStatus Type Values:
|
.1.3.6.1.4.1.637.61.1.56.5.1.14 |
||||||||||||||||||
|
sfpDiagTCAStatusRxPowermandatory
A column in the sfpDiagTable, containing the freshly-measured transmit
power alarm/warning threshold crossing status of the specified SFP/SFP+/XFP/CFP4. ALCATEL NOTE: ACCESS: RO USAGE: NA … |
SfpDiagTCAStatus Type Values:
|
.1.3.6.1.4.1.637.61.1.56.5.1.15 |
||||||||||||||||||
|
sfpDiagRSSIProfileIdmandatory
Indicates the RSSI TCA profile, refer to SfpRSSIProfileTable.
65535 means auto mode. When configured 65535, when sfp is plugged in, system will detect sfp type and associate related sfp rssi profile. User cannot modify … |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.5.1.16 |
||||||||||||||||||
|
sfpDiagRSSIStatemandatory
Enable(1) and Disable(2) to RSSI function on port level.
ALCATEL NOTE: ACCESS: NA usage: OPT persistent: YES INSRVMOD:YES RANGE:1,2 DEFVALUE: 2 UNITS: NA … |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.5.1.17 |
||||||||||||||||||
|
sfpDiagRSSIRxPowerAlmLowmandatory
this object indicates the threshold for alarm OLTRXPWLO. if RX power is less than this value,then alarm OLTRXPWLO will be reported.
For CFP4, there is no module level 'RxPower' monitor,this is the threshold for network … |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.18 |
||||||||||||||||||
|
sfpDiagRSSIRxPowerAlmHighmandatory
this object indicates the threshold for OLTRXPWHI. When RX power is larger than this value,then alarm OLTRXPWHI will be reported.
For CFP4, there is no module level 'RxPower' monitor,this is the threshold for network la… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.19 |
||||||||||||||||||
|
sfpDiagRSSIRxPowerWarnLowmandatory
this object indicates the threshold for OLTRXPWLOWARN. When Rx power is less than this value,alarm OLTRXPWLOWARN will be reported.
For CFP4, there is no module level 'RxPower' monitor,this is the threshold for network … |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.20 |
||||||||||||||||||
|
sfpDiagRSSIRxPowerWarnHighmandatory
this object indicates the threshold for OLTRXPWHIWARN. When Rx power is larger than this value,alarm OLTRXPWHIWARN will be reported.
For CFP4, there is no module level 'RxPower' monitor,this is the threshold for network… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.21 |
||||||||||||||||||
|
sfpDiagRSSITxPowerAlmLowmandatory
this object indicates the threshold for OLTTXPWLO. When Tx power is less than this value,alarm OLTTXPWLO will be reported.
For CFP4, there is no module level 'TxPower' monitor,this is the threshold for network lane. For… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.22 |
||||||||||||||||||
|
sfpDiagRSSITxPowerAlmHighmandatory
this object indicates the threshold for OLTTXPWHI. When Tx power is larger than this value,alarm OLTTXPWHI will be reported.
For CFP4, there is no module level 'TxPower' monitor,this is the threshold for network lane. … |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.23 |
||||||||||||||||||
|
sfpDiagRSSITxPowerWarnLowmandatory
this object indicates the threshold for OLTTXPWLOWARN. When Tx power is less than this value,alarm OLTTXPWLOWARN will be reported.
For CFP4, there is no module level 'TxPower' monitor,this is the threshold for network l… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.24 |
||||||||||||||||||
|
sfpDiagRSSITxPowerWarnHighmandatory
this object indicates the threshold for OLTTXPWHIWARN. When Tx power is larger than this value,alarm OLTTXPWHIWARN will be reported.
For CFP4, there is no module level 'TxPower' monitor,this is the threshold for network… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.25 |
||||||||||||||||||
|
sfpDiagRSSITemperatureAlmLowmandatory
this object indicates the threshold for OLTTEMPLO. when temperature is less than this value, then alarm OLTTEMPLO will be reported.
For CFP4,this is the module level threshold.The network lane level threshold is indicat… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.26 |
||||||||||||||||||
|
sfpDiagRSSITemperatureAlmHighmandatory
this object indicates the threshold for OLTTEMPHI. When temperature is larger than this value,alarm OLTTEMPHI will be reported.
For CFP4,this is the module level threshold.The network lane level threshold is indicated b… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.27 |
||||||||||||||||||
|
sfpDiagRSSITemperatureWarnLowmandatory
this object indicates the threshold for OLTTEMPLOWARN. when temperature is less than this value, then alarm OLTTEMPLOWARN will be reported.
For CFP4,this is the module level threshold.The network lane level threshold is… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.28 |
||||||||||||||||||
|
sfpDiagRSSITemperatureWarnHighmandatory
this object indicates the threshold for OLTTEMPHIWARN. When temperature is larger than this value,alarm OLTTEMPHIWARN will be reported.
For CFP4,this is the module level threshold.The network lane level threshold is ind… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.29 |
||||||||||||||||||
|
sfpDiagRSSIBiasAlmLowmandatory
this object indicates the threshold for OLTBIASLO. when bias is less than this value, then alarm OLTBIASLO will be reported.
For CFP4,this is the module level threshold.The network lane threshold is indicated by sfpDiag… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.30 |
||||||||||||||||||
|
sfpDiagRSSIBiasAlmHighmandatory
this object indicates the threshold for OLTBIASHI. when bias is larger than this value, then alarm OLTBIASHI will be reported.
For CFP4,this is the module level threshold.The network lane level threshold is indicated by… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.31 |
||||||||||||||||||
|
sfpDiagRSSIBiasWarnLowmandatory
this object indicates the threshold for OLTBIASLOWARN. when bias is less than this value, then alarm OLTBIASLOWARN will be reported.
For CFP4,this is the module level threshold.The network lane level threshold is indica… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.32 |
||||||||||||||||||
|
sfpDiagRSSIBiasWarnHighmandatory
this object indicates the threshold for OLTBIASHIWARN. when bias is larger than this value, then alarm OLTBIASHIWARN will be reported.
For CFP4,this is the module level threshold.The network lane level threshold is indi… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.33 |
||||||||||||||||||
|
sfpDiagRSSIVoltageAlmLowmandatory
this object indicates the threshold for OLTVOLLO. when voltage is less than this value, then alarm OLTVOLLO will be reported.
'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.34 |
||||||||||||||||||
|
sfpDiagRSSIVoltageAlmHighmandatory
this object indicates the threshold for OLTVOLHI. when voltage is larger than this value, then alarm OLTVOLHI will be reported.
'Not Available' is shown when the measurement could not be obtained,If the specified SFP ca… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.35 |
||||||||||||||||||
|
sfpDiagRSSIVoltageWarnLowmandatory
this object indicates the threshold for OLTVOLLOWARN. when voltage is less than this value, then alarm OLTVOLLOWARN will be reported.
'Not Available' is shown when the measurement could not be obtained,If the specified … |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.36 |
||||||||||||||||||
|
sfpDiagRSSIVoltageWarnHighmandatory
this object indicates the threshold for OLTVOLHIWARN. when voltage is larger than this value, then alarm OLTVOLHIWARN will be reported.
'Not Available' is shown when the measurement could not be obtained,If the specifie… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.37 |
||||||||||||||||||
|
sfpDiagRSSIExtRxPowerAlmLowmandatory
this object indicates the threshold for alarm OLTRXPWLO. if RX power is less than this value, then alarm OLTRXPWLO will be reported.
Applicable only for 10G EPON SFPs,Shown as 'Not Applicable' for others. For EPON SFPs… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.38 |
||||||||||||||||||
|
sfpDiagRSSIExtRxPowerAlmHighmandatory
this object indicates the threshold for OLTRXPWHI. When RX power is larger than this value,then alarm OLTRXPWHI will be reported.
Applicable only for 10G EPON SFPs,Shown as 'Not Applicable' for others. For EPON SFPs 'No… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.39 |
||||||||||||||||||
|
sfpDiagRSSIExtRxPowerWarnLowmandatory
this object indicates the threshold for OLTRXPWLOWARN. When Rx power is less than this value,alarm OLTRXPWLOWARN will be reported.
Applicable only for 10G EPON SFPs,Shown as 'Not Applicable' for others. For EPON SFPs '… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.40 |
||||||||||||||||||
|
sfpDiagRSSIExtRxPowerWarnHighmandatory
this object indicates the threshold for OLTRXPWHIWARN. When Rx power is larger than this value,alarm OLTRXPWHIWARN will be reported.
Applicable only for 10G EPON SFPs,Shown as 'Not Applicable' for others. For EPON SFPs … |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.41 |
||||||||||||||||||
|
sfpDiagRSSIExtTxPowerAlmLowmandatory
this object indicates the threshold for EXTOLTTXPWLO. When Tx power is less than this value,alarm EXTOLTTXPWLO will be reported.
Applicable only for 10G EPON SFPs,Shown as 'Not Applicable' for others. For EPON SFPs 'Not… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.42 |
||||||||||||||||||
|
sfpDiagRSSIExtTxPowerAlmHighmandatory
this object indicates the threshold for EXTOLTTXPWHI. When Tx power is larger than this value,alarm EXTOLTTXPWHI will be reported.
Applicable only for 10G EPON SFPs,Shown as 'Not Applicable' for others. For EPON SFPs 'N… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.43 |
||||||||||||||||||
|
sfpDiagRSSIExtTxPowerWarnLowmandatory
this object indicates the threshold for EXTOLTTXPWLOWARN. When Tx power is less than this value,alarm EXTOLTTXPWLOWARN will be reported.
Applicable only for 10G EPON SFPs,Shown as 'Not Applicable' for others. For EPON S… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.44 |
||||||||||||||||||
|
sfpDiagRSSIExtTxPowerWarnHighmandatory
this object indicates the threshold for EXTOLTTXPWHIWARN. When Tx power is larger than this value,alarm EXTOLTTXPWHIWARN will be reported.
Applicable only for 10G EPON SFPs,Shown as 'Not Applicable' for others. For EPON… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.45 |
||||||||||||||||||
|
sfpDiagRSSIExtBiasAlmLowmandatory
For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASLO. when bias is less than this value, then alarm EXTOLTBIASLO will be reported.
For CFP4, this object indicates the threshold for OLTBIASLO.When any n… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.46 |
||||||||||||||||||
|
sfpDiagRSSIExtBiasAlmHighmandatory
For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASHI. when bias is larger than this value, then alarm EXTOLTBIASHI will be reported.
For CFP4, this object indicates the threshold for OLTBIASHI.When any… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.47 |
||||||||||||||||||
|
sfpDiagRSSIExtBiasWarnLowmandatory
For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASLOWARN. when bias is less than this value,then alarm EXTOLTBIASLOWARN will be reported.
For CFP4, this object indicates the threshold for OLTBIASLOWARN… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.48 |
||||||||||||||||||
|
sfpDiagRSSIExtBiasWarnHighmandatory
For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASHIWARN. when bias is larger than this value,then alarm EXTOLTBIASHIWARN will be reported.
For CFP4, this object indicates the threshold for OLTBIASHIWA… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.49 |
||||||||||||||||||
|
sfpDiagRSSIExtTemperatureAlmLowmandatory
This object indicates the laser temperature low alarm threshold of network lane for CFP4.
When any network lane's laser temperature of CFP4 is less than this value,then alarm OLTTEMPLO will be reported. The module leve… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.50 |
||||||||||||||||||
|
sfpDiagRSSIExtTemperatureAlmHighmandatory
This object indicates the laser temperature high alarm threshold of network lanefor CFP4.
When any network lane's laser temperature of CFP4 is larger than this value,then alarm OLTTEMPHI will be reported. The module le… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.51 |
||||||||||||||||||
|
sfpDiagRSSIExtTemperatureWarnLowmandatory
This object indicates the laser temperature low warning threshold of network lane for CFP4.
When any network lane's laser temperature of CFP4 is less than this value,then alarm OLTTEMPLOWARN will be reported. The modul… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.52 |
||||||||||||||||||
|
sfpDiagRSSIExtTemperatureWarnHighmandatory
This object indicates the laser temperature high warning threshold of network lane for CFP4.
When any network lane's laser temperature of CFP4 is larger than this value,then alarm OLTTEMPHIWARN will be reported. The mo… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.5.1.53 |
.1.3.6.1.4.1.637.61.1.56.6
·
1 row entry
·
13 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk sfpInventoryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-SFP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-SFP-MIB::sfpInventoryTable'
The primary purpose of this read-only table: allow the SNMP
manager to read read-only EEPROM contents from EEPROM of SFP
Details are documented with the individual objects.
The following table size field is set to 'not applicable',
since it does not make sense for the SNMP manager to cache the
values in this table. The values will be different each time
they are read from agent.
ALCATEL NOTE:
TABLESIZE: NA
DESCR: NA
The index for the sfpInventoryTable identifies an SFP cage
using two fields: the logicalSlotId of the card associated
with the SFP cage (normally the card with the cages on its
faceplate), and the SFP cage number.
using two fields: the logicalSlotId of the card associated
with the SFP cage (normally the card with the cages on its
faceplate), and the SFP cage number.
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
sfpInvLogicalSlotmandatory
This is the first index of the sfpInventoryTable.
Normally, this object contains the Logical Slot ID (as defined in the Equipment MIB) of the card which has the SFP cage of interest on its faceplate. If… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.6.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sfpInvFaceplateNumbermandatory
This is the second index of the sfpInventoryTable.
It is the number of the SFP cage, as shown on the card faceplate. If the faceplate cage number is zero, sfpInvFaceplateNumber=0 is used (i.e. zero is not a special … |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.6.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sfpInvAvailablemandatory
A column in the sfpInventoryTable, with the following code points.
noError - valid values for all objects in this row (e.g. sfpDiagRxPower) were obtained from the SFP in the specified cage. cageEmpt… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.6.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sfpInvFiberTypemandatory
A column in the sfpInventoryTable, containing the fiber type of
the specified SFP/SFP+. For XFP, it is always singleMode ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: NO INSRVMOD: NO … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.6.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sfpInvAluPartNumbermandatory
A column in the sfpInventoryTable, containing the Alcatel-Lucent part number
of the specified SFP/SFP+/XFP, encoded into a string. ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: NO INSRVMOD:… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.6.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sfpInvCLEIcodemandatory
A column in the sfpInventoryTable, containing the CLEI code
of the specified SFP/SFP+/XFP, encoded into a string. ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: NO INSRVMOD: NO RANGE: NA… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.6.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sfpInvTxWavelengthmandatory
A column in the sfpInventoryTable, containing the transmit wavelength
of the specified SFP/SFP+/XFP, encoded into a string. ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: NO INSRVMOD: NO … |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.6.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sfpInvAdditionalInfomandatory
A column in the sfpInventoryTable, containing the customer specific
additional information of the specified SFP/SFP+/XFP, encoded into a string. ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST:… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.6.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sfpInvMfgNamemandatory
A column in the sfpInventoryTable, containing the manufacturer or
vendor name of the specified SFP/SFP+/XFP, encoded into a string. ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: NO INS… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.6.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sfpInvMfgOUICodemandatory
A column in the sfpInventoryTable, containing the manufacturer or
vendor OUI code of the specified SFP/SFP+/XFP, encoded into a string. ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: NO … |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.6.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sfpInvMfgSerialNumbermandatory
A column in the sfpInventoryTable, containing the manufacturer or
vendor serial number of the specified SFP/SFP+/XFP, encoded into a string. ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: NO … |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.6.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sfpInvMfgDatemandatory
A column in the sfpInventoryTable, containing the manufactured date
of the specified SFP/SFP+/XFP, encoded into a string. ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: NO INSRVMOD: NO… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.6.1.12 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
sfpInvSpecificalTypemandatory
indicate basic type of the specified SFP(+)/XFP/QSFP(+).
ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: NA DEFVALUE: NA UNITS: NA SPARSE: NA DESCR… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.6.1.13 |
.1.3.6.1.4.1.637.61.1.56.7
·
1 row entry
·
41 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk sfpRSSIProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-SFP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-SFP-MIB::sfpRSSIProfileTable'
This object contains a table for defining RSSI for SFP/XFP/CFP4 by operator, which could be used for all NT/NTIO cards and DSL/GPON/EPON line cards. ALCATEL NOTE: SUPPORT: YES TABLESIZE: DEP
An entry in the sfpRSSIProfileTable.
Row creation : an entry is created when operator creates SfpRSSI profile.
Row deletion : an entry is created when operator deletes SfpRSSI profile.
ALCATEL NOTE:
SUPPORT: YES
Row creation : an entry is created when operator creates SfpRSSI profile.
Row deletion : an entry is created when operator deletes SfpRSSI profile.
ALCATEL NOTE:
SUPPORT: YES
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
sfpRSSIProfileIndexmandatory
This object is the index to the sfpSfpRSSIProfileTable.
ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: YES INSRVMOD: NO RANGE: NA DEFVALUE: NA UNITS: NA SPAR… |
ASAM-TC-MIBAsamProfileIndex Type Constraints: range: 1..65535 |
.1.3.6.1.4.1.637.61.1.56.7.1.1 |
||||||||||||
|
sfpRSSIProfileNamemandatory
The corresponding name for a given profile id.
The name corresponding to the ProfileId must also be unique. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: YES INSRVMOD: NO RANGE: NA DEFV… |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.7.1.2 |
||||||||||||
|
sfpRSSIProfileRefCountmandatory
Indicates the number of entities using this profile. If the
reference count is greater than 0, then this profile is 'in use', and may NOT be deleted. If the value is 0, then this profile is 'not in use', and can be dele… |
ASAM-TC-MIBAsamProfileRefCount Type Constraints: range: 0..65535 |
.1.3.6.1.4.1.637.61.1.56.7.1.3 |
||||||||||||
|
sfpRSSIRowStatusmandatory
This object is used to create a new row or delete an row.
ALCATEL NOTE: ACCESS: NA usage: MAND persistent: YES INSRVMOD:YES RANGE:1,4,6 DEFVALUE: NA UNITS: NA SPARSE: NA |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.637.61.1.56.7.1.4 |
||||||||||||
|
sfpRSSIRxPowerAlmLowmandatory
this object indicates the threshold for alarm OLTRXPWLO. if RX power is less than this value, then
alarm OLTRXPWLO will be reported. For CFP4, there is no module level 'RxPower' monitor,this is the threshold for network… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.5 |
||||||||||||
|
sfpRSSIRxPowerAlmHighmandatory
this object indicates the threshold for OLTRXPWHI. When RX power is larger than this value,
then alarm OLTRXPWHI will be reported. For CFP4, there is no module level 'RxPower' monitor,this is the threshold for network l… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.6 |
||||||||||||
|
sfpRSSIRxPowerWarnLowmandatory
this object indicates the threshold for OLTRXPWLOWARN. When Rx power is less than this value,
alarm OLTRXPWLOWARN will be reported. For CFP4, there is no module level 'RxPower' monitor,this is the threshold for network… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.7 |
||||||||||||
|
sfpRSSIRxPowerWarnHighmandatory
this object indicates the threshold for OLTRXPWHIWARN. When Rx power is larger than this value,
alarm OLTRXPWHIWARN will be reported. For CFP4, there is no module level 'RxPower' monitor,this is the threshold for networ… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.8 |
||||||||||||
|
sfpRSSITxPowerAlmLowmandatory
this object indicates the threshold for OLTTXPWLO. When Tx power is less than this value,
alarm OLTTXPWLO will be reported. For CFP4, there is no module level 'TxPower' monitor,this is the threshold for network lane. F… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.9 |
||||||||||||
|
sfpRSSITxPowerAlmHighmandatory
this object indicates the threshold for OLTTXPWHI. When Tx power is larger than this value,
alarm OLTTXPWHI will be reported. For CFP4, there is no module level 'TxPower' monitor,this is the threshold for network lane. … |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.10 |
||||||||||||
|
sfpRSSITxPowerWarnLowmandatory
this object indicates the threshold for OLTTXPWLOWARN. When Tx power is less than this value,
alarm OLTTXPWLOWARN will be reported. For CFP4, there is no module level 'TxPower' monitor,this is the threshold for network … |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.11 |
||||||||||||
|
sfpRSSITxPowerWarnHighmandatory
this object indicates the threshold for OLTTXPWHIWARN. When Tx power is larger than this value,
alarm OLTTXPWHIWARN will be reported. For CFP4, there is no module level 'TxPower' monitor,this is the threshold for networ… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.12 |
||||||||||||
|
sfpRSSITemperatureAlmLowmandatory
this object indicates the threshold for OLTTEMPLO. when temperature is less than this value, then
alarm OLTTEMPLO will be reported. For CFP4, this is the module level threshold.The network lane level threshold is indica… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.13 |
||||||||||||
|
sfpRSSITemperatureAlmHighmandatory
this object indicates the threshold for OLTTEMPHI. When temperature is larger than this value,
alarm OLTTEMPHI will be reported. For CFP4, this is the module level threshold.The network lane level threshold is indicated… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.14 |
||||||||||||
|
sfpRSSITemperatureWarnLowmandatory
this object indicates the threshold for OLTTEMPLOWARN. when temperature is less than this value, then
alarm OLTTEMPLOWARN will be reported. For CFP4, this is the module level threshold.The network lane level threshold i… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.15 |
||||||||||||
|
sfpRSSITemperatureWarnHighmandatory
this object indicates the threshold for OLTTEMPHIWARN. When temperature is larger than this value,
alarm OLTTEMPHIWARN will be reported. For CFP4, this is the module level threshold.The network lane level threshold is i… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.16 |
||||||||||||
|
sfpRSSIBiasAlmLowmandatory
this object indicates the threshold for OLTBIASLO. when bias is less than this value, then
alarm OLTBIASLO will be reported. For CFP4, this is the module level threshold.The network lane level threshold is indicated by … |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.17 |
||||||||||||
|
sfpRSSIBiasAlmHighmandatory
this object indicates the threshold for OLTBIASHI. when bias is larger than this value, then
alarm OLTBIASHI will be reported. For CFP4, this is the module level threshold.The network lane level threshold is indicated b… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.18 |
||||||||||||
|
sfpRSSIBiasWarnLowmandatory
this object indicates the threshold for OLTBIASLOWARN. when bias is less than this value, then
alarm OLTBIASLOWARN will be reported. For CFP4, this is the module level threshold.The network lane level threshold is indic… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.19 |
||||||||||||
|
sfpRSSIBiasWarnHighmandatory
this object indicates the threshold for OLTBIASHIWARN. when bias is larger than this value, then
alarm OLTBIASHIWARN will be reported. For CFP4, this is the module level threshold.The network lane level threshold is ind… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.20 |
||||||||||||
|
sfpRSSIVoltageAlmLowmandatory
this object indicates the threshold for OLTVOLLO. when voltage is less than this value, then
alarm OLTVOLLO will be reported. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: YES I… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.21 |
||||||||||||
|
sfpRSSIVoltageAlmHighmandatory
this object indicates the threshold for OLTVOLHI. when voltage is larger than this value, then
alarm OLTVOLHI will be reported. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: YES … |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.22 |
||||||||||||
|
sfpRSSIVoltageWarnLowmandatory
this object indicates the threshold for OLTVOLLOWARN. when voltage is less than this value, then
alarm OLTVOLLOWARN will be reported. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: YES … |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.23 |
||||||||||||
|
sfpRSSIVoltageWarnHighmandatory
this object indicates the threshold for OLTVOLHIWARN. when voltage is larger than this value, then
alarm OLTVOLHIWARN will be reported. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: YES … |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.24 |
||||||||||||
|
sfpRSSIExtRxPowerAlmLowmandatory
this object indicates the threshold for alarm OLTRXPWLO. if RX power is less than this value, then
alarm OLTRXPWLO will be reported. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: YES … |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.25 |
||||||||||||
|
sfpRSSIExtRxPowerAlmHighmandatory
this object indicates the threshold for OLTRXPWHI. When RX power is larger than this value,
then alarm OLTRXPWHI will be reported. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: YES INSRVMOD: YES RANG… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.26 |
||||||||||||
|
sfpRSSIExtRxPowerWarnLowmandatory
this object indicates the threshold for OLTRXPWLOWARN. When Rx power is less than this value,
alarm OLTRXPWLOWARN will be reported. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: YES INSRVMOD: YES RA… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.27 |
||||||||||||
|
sfpRSSIExtRxPowerWarnHighmandatory
this object indicates the threshold for OLTRXPWHIWARN. When Rx power is larger than this value,
alarm OLTRXPWHIWARN will be reported. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: YES INSRVMOD: YES R… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.28 |
||||||||||||
|
sfpRSSIExtTxPowerAlmLowmandatory
this object indicates the threshold for EXTOLTTXPWLO. When Tx power is less than this value,
alarm EXTOLTTXPWLO will be reported. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: YES INSRVMOD: YES RA… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.29 |
||||||||||||
|
sfpRSSIExtTxPowerAlmHighmandatory
this object indicates the threshold for EXTOLTTXPWHI. When Tx power is larger than this value,
alarm EXTOLTTXPWHI will be reported. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: YES INSRVMOD: YES RAN… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.30 |
||||||||||||
|
sfpRSSIExtTxPowerWarnLowmandatory
this object indicates the threshold for EXTOLTTXPWLOWARN. When Tx power is less than this value,
alarm EXTOLTTXPWLOWARN will be reported. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: YES INSRVMOD: Y… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.31 |
||||||||||||
|
sfpRSSIExtTxPowerWarnHighmandatory
this object indicates the threshold for EXTOLTTXPWHIWARN. When Tx power is larger than this value,
alarm EXTOLTTXPWHIWARN will be reported. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: YES INSRVMOD:… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.32 |
||||||||||||
|
sfpRSSIExtBiasAlmLowmandatory
For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASLO. when bias is less than this value, then
alarm EXTOLTBIASLO will be reported. For CFP4,this object indicates the threshold of network lane for OLTBI… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.33 |
||||||||||||
|
sfpRSSIExtBiasAlmHighmandatory
For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASHI. when bias is larger than this value, then
alarm EXTOLTBIASHI will be reported. For CFP4,this object indicates the threshold of network lane for OLT… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.34 |
||||||||||||
|
sfpRSSIExtBiasWarnLowmandatory
For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASLOWARN. when bias is less than this value, then
alarm EXTOLTBIASLOWARN will be reported. For CFP4,this object indicates the threshold of network lane f… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.35 |
||||||||||||
|
sfpRSSIExtBiasWarnHighmandatory
For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASHIWARN. when bias is larger than this value, then
alarm EXTOLTBIASHIWARN will be reported. For CFP4,this object indicates the threshold of network lane… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.36 |
||||||||||||
|
sfpRssiProfileTypemandatory
RSSI profile type
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.7.1.37 |
||||||||||||
|
sfpRSSIExtTemperatureAlmLowmandatory
This object indicates the laser temperature low alarm threshold of network lane for CFP4.
When any network lane's laser temperature of CFP4 is less than this value,alarm OLTTEMPLO will be reported. ALCATEL NOTE: ACCESS… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.38 |
||||||||||||
|
sfpRSSIExtTemperatureAlmHighmandatory
This object indicates the laser temperature high alarm threshold of network lane for CFP4.
When any network lane's laser temperature of CFP4 is large than this value,alarm OLTTEMPHI will be reported. ALCATEL NOTE: ACCE… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.39 |
||||||||||||
|
sfpRSSIExtTemperatureWarnLowmandatory
This object indicates the laser temperature low warning threshold of network lane for CFP4.
When any network lane's laser temperature of CFP4 is less than this value,alarm OLTTEMPLOWARN will be reported. ALCATEL NOTE: … |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.40 |
||||||||||||
|
sfpRSSIExtTemperatureWarnHighmandatory
This object indicates the laser temperature high warning threshold of network lane for CFP4.
When any network lane's laser temperature of CFP4 is large than this value,alarm OLTTEMPHIWARN will be reported. ALCATEL NOTE… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.7.1.41 |
.1.3.6.1.4.1.637.61.1.56.10
·
1 row entry
·
10 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk dsx1ClockConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-SFP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-SFP-MIB::dsx1ClockConfigTable'
This table contains the 2E1/DS1 SFP Clock configuration information. ALCATEL NOTE: TABLESIZE: 10
Each entry consists of a list of 2E1/DS1 SFP general configuration parameters.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
dsx1SfpClkConfigLogicalSlotmandatory
This is the first index of the dsx1ClockConfig Table.
Normally, this object contains the Logical Slot ID (as defined in the Equipment MIB) of the card which has the SFP cage of interest on its faceplate… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.10.1.1 |
||||||||||||
|
dsx1SfpClkConfigFaceplateNumbermandatory
This is the second index of the dsx1ClockConfigTable.
It is the number of the SFP cage, as shown on the card faceplate. If the faceplate cage number is zero, sfpDiagSfpFaceplateNumber=0 is used (i.e. zero is not a s… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.10.1.2 |
||||||||||||
|
dsx1SfpClkConfigSyncSourcemandatory
Select as sync source between clock recovered from Serdes or Tributary clock.
ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 1..3 DEFVALUE: 3 UNITS: NA … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.10.1.3 |
||||||||||||
|
dsx1SfpClkConfigDegradeAlarmmandatory
Enable degrade alarm on los pin.
ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 1 DEFVALUE: 1 UNITS: NA SPARSE: NO DESCR: Only Default value ena… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.10.1.4 |
||||||||||||
|
dsx1SfpClkConfigSoftwareResetmandatory
noSoftwareReset (default value), this is the value that is returned when read the attribute.
softwareReset, this is the value that can be set by the manager. This value will trigger a software reset. . … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.10.1.5 |
||||||||||||
|
dsx1SfpClkAlarmStatemandatory
serdesFailAlarm (1):Failure of the SERDES clock alarm (active high)
tributary1FailAlarm (2): Failure alarm: the tributary 1 clock is not present (active high) tributary2FailAlarm (4):Failure alarm: the tr… |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.637.61.1.56.10.1.6 |
||||||||||||
|
dsx1SfpClkConfigClkControlSignalmandatory
SEL_LOC_OR_SRC. Control signal to select the VTCXO control signal
(PWM) between DPLL output and a ~4MHZ square wave signal generated dividing the same system clock. 0 Square wave generated from system clock. 1 Con… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.10.1.7 |
||||||||||||
|
dsx1SfpClkConfigClkSourcemandatory
CLK_SOURCE_SEL. This bit is used to select between local VTCXO and
CLOCK FROM SERDES as synchronization source for the signals: CK_EN-25M and CK-EN-ETSI-ANSI 1 CK-125M-REC 0 CK-125M-LOC ALCATEL NOTE: … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.10.1.8 |
||||||||||||
|
dsx1SfpClkRowStatusmandatory
This object is used to create a new row or delete an
existing row in this table. The possible valid values are: (1) active (4) createdAndGo (6) destroy To create an entry in this table, this object should be set t… |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.637.61.1.56.10.1.9 |
||||||||||||
|
dsx1SfpClkConfStatemandatory
Clock Configuration state bitmap.
bit 0: high value indicates SyncSource Configuration fail bit 1: high value indicates DegradeAlarm Configuration fail bit 2: high value indicates SoftwareReset Configuration fail b… |
Integer32 Constraints: range: 0-31 |
.1.3.6.1.4.1.637.61.1.56.10.1.10 |
.1.3.6.1.4.1.637.61.1.56.11
·
1 row entry
·
11 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk dsx1GeneralConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-SFP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-SFP-MIB::dsx1GeneralConfigTable'
This table contains the 2E1/DS1 SFP General configuration information. ALCATEL NOTE: TABLESIZE: 11
Each entry consists of a list of 2E1/DS1 SFP general configuration parameters.
A row entry is created or deleted in this table when the corresponding
operation on a row is done in dsx1ClockConfigTable
A row entry is created or deleted in this table when the corresponding
operation on a row is done in dsx1ClockConfigTable
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
dsx1SfpReadyStatusmandatory
This is the host SFP status.
ready (0): notready (1): ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: No INSRVMOD: NA RANGE: 0,1 DEFVALUE: NA UNITS: NA SPARSE: NO DESCR: SFP Ready state |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.11.1.1 |
||||
|
dsx1SfpGenConfigMarketmandatory
ETSI (0): used for ETSI Market for E1 Lines.
ANSI (1): used for ANSI Market for T1/DS1 Lines. ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 0 DEFVALUE: 0 UNITS: N… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.11.1.2 |
||||
|
dsx1SfpGenConfigTributary1mandatory
Enable/Disable Tributary1.
disable (0): disable Tributary 1. enable (1): enable Tributary 1. ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: NA DEFVALUE: NA UNITS:… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.11.1.3 |
||||
|
dsx1SfpGenConfigTributary2mandatory
Enable/Disable Tributary2.
disable (0): Disable Tributary 2. enable (1): enable Tributary 0. ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: NA DEFVALUE: NA UNITS:… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.11.1.4 |
||||
|
dsx1SfpGenConfigSERDESmandatory
disable (0): Disable SERDES device.
enable (1): enable SERDES device. ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 1 DEFVALUE: 1 UNITS: NA SPARSE: NO DESCR: O… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.11.1.5 |
||||
|
dsx1SfpGenConfigSERDESLoopBackmandatory
Enable of SERDES device. When held low, the SERDES
device enters in an ultralow-power idle state and the transmitter output pins are set to high impedance state . disable (0): Disable SERDES LoopBack. en… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.11.1.6 |
||||
|
dsx1SfpGenConfigSGMIILocalLoopBackmandatory
disable (0): SGMII local loopback disable towards CESoP.
enable (1): SGMII local loopback enable towards CESoP. ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 0,1… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.11.1.7 |
||||
|
dsx1SfpGenConfigSGMIIRemoteLoopBackmandatory
disable (0): SGMII remote loopback disable towards serdes.
enable (1): SGMII remote loopback enable towards serdes. ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.11.1.8 |
||||
|
dsx1SfpGenConfigLIUResetmandatory
reset (0): A low level value (for more than 100ns) forces the LIU to reset state.
This is the value that can be set by the manager. This value will trigger a LIU reset. noReset (1): This is the value tha… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.11.1.9 |
||||
|
dsx1SfpGenConfigLIUHighImpedencemandatory
low (0):
high (1): A high level value places all transmitter drivers of the LIU in high Impedence state. ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 0.1 DEFVALUE: … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.11.1.10 |
||||
|
dsx1SfpGenConfigStatemandatory
General Configuration state bitmap.
bit 0: high value indicates Market Configuration fail bit 1: high value indicates Tributory1 Configuration fail bit 2: high value indicates Tributory2 Configuration fail bit 3: … |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.637.61.1.56.11.1.11 |
.1.3.6.1.4.1.637.61.1.56.12
·
1 row entry
·
4 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk dsx1PWTDMInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-SFP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-SFP-MIB::dsx1PWTDMInterfaceTable'
This table contains the 2E1/DS1 SFP PW TDM interface configuration information. ALCATEL NOTE: TABLESIZE: 4
Each entry consists of a list of 2E1/DS1 SFP TDM Interface parameters.
A row entry is created or deleted in this table when the corresponding
operation on a row is done in dsx1ClockConfigTable
A row entry is created or deleted in this table when the corresponding
operation on a row is done in dsx1ClockConfigTable
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
dsx1PWTDMInterfaceMarketmandatory
etsi(0): used for ETSI Market for E1 Lines.
ansi (1): used for ANSI Market for T1/DS1 Lines. ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 0,1 DEFVALUE: 0 … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.12.1.1 |
||||
|
dsx1PWTDMInterfaceWindowLengthmandatory
Window length measured in unit of 10 ms.
Eg. wndow_len = 10 means window is 10*10 = 100ms long ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 0..255 DEFVALUE: 10 UNITS: milliseconds… |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.637.61.1.56.12.1.2 |
||||
|
dsx1PWTDMInterfaceWindowNumbermandatory
Consecutively detected window number.
Eg. wndow_num = 20 means if packets lost in consecutive 20 windows, then assert CESalarm (Circuit emulation service alarm); otherwise, deassert CESalarm ALCATEL NOTE:… |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.637.61.1.56.12.1.3 |
||||
|
dsx1PWTDMInterfaceConfStatemandatory
PWTDM Interface Configuration state bitmap.
bit 0: high value indicates Market Configuration fail bit 1: high value indicates Window Length Configuration fail bit 2: high value indicates Window Number Configuration … |
Integer32 Constraints: range: 0-7 |
.1.3.6.1.4.1.637.61.1.56.12.1.4 |
.1.3.6.1.4.1.637.61.1.56.13
·
1 row entry
·
19 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk dsx1PWTDMConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-SFP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-SFP-MIB::dsx1PWTDMConfigTable'
This table contains the 2E1/DS1 SFP TDMoP pseudowire configuration information. ALCATEL NOTE: TABLESIZE: 19
Each entry consists of a list of 2E1/DS1 SFP TDMoP parameters.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
dsx1SfpPWTDMLogicalSlotmandatory
This is the first index of the dsx1PWTDMConfig Table.
Normally, this object contains the Logical Slot ID (as defined in the Equipment MIB) of the card which has the SFP cage of interest on its faceplate… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.13.1.1 |
||||||||||||
|
dsx1SfpPWTDMFaceplateNumbermandatory
This is the second index of the dsx1PWTDMConfig Table.
It is the number of the SFP cage, as shown on the card faceplate. If the faceplate cage number is zero, sfpDiagSfpFaceplateNumber=0 is used (i.e. zero is not a … |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.13.1.2 |
||||||||||||
|
dsx1PWTDMTributaryIndexmandatory
This is the third index of the dsx1PWTDMConfigTable.
Normally, this object used to select the tributary selecton (1 or 2 or 3) of the 2xE1/DS1 FPGA where value 1 selects tributary 1, value 2 selects… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.13.1.3 |
||||||||||||
|
dsx1PWTDMChannelmandatory
Chan_ena
0: close this channel; 1: open this channel ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 0,1 DEFVALUE: NA UNITS: NA SPARSE: NO DESCR: NA |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.13.1.4 |
||||||||||||
|
dsx1PWTDMRtpModemandatory
Rtp_present
0: rtp is not present, configure to ACR mode; 1: rtp is present, configure DCR mode ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 0,1 DEFVALUE: NA UNITS: NA SP… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.13.1.5 |
||||||||||||
|
dsx1PWTDMPacketLengthmandatory
Config packet length bits (13:0)
ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 0...16382 DEFVALUE: NA UNITS: NA SPARSE: NO DESCR: NA |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.13.1.6 |
||||||||||||
|
dsx1PWTDMSourceAddressPointermandatory
SA select 2 bits field (TDM2Eth)
00 - Select Source Address 0 01 - Select Source Address 1 10 - Select Source Address 2 11 - Select Source Address 3 ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRV… |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.637.61.1.56.13.1.7 |
||||||||||||
|
dsx1PWTDMSourceAddressmandatory
MAC SA for each tributary
ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: NA DEFVALUE: NA UNITS: NA SPARSE: NO DESCR: NA |
r/w | .1.3.6.1.4.1.637.61.1.56.13.1.8 |
||||||||||||
|
dsx1PWTDMDestinationMacmandatory
MAC DA for each tributary
ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: NA DEFVALUE: NA UNITS: NA SPARSE: NO DESCR: NA |
r/w | .1.3.6.1.4.1.637.61.1.56.13.1.9 |
||||||||||||
|
dsx1PWTDMPrioritymandatory
802.1p 3 bits field.
ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 0...7 DEFVALUE: NA UNITS: NA SPARSE: NO DESCR: NA |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.637.61.1.56.13.1.10 |
||||||||||||
|
dsx1PWTDMVlanIdmandatory
Vlan ID.
ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 0...4095 DEFVALUE: NA UNITS: NA SPARSE: NO DESCR: NA |
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.637.61.1.56.13.1.11 |
||||||||||||
|
dsx1PWTDMECIDEthToTDMmandatory
ECID (Emulated Circuit Identifer) 20 bit field Eth2Tdm.
ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 0..1048575 DEFVALUE: NA UNITS: NA SPARSE: NO … |
Integer32r/w Constraints: range: 0-1048575 |
.1.3.6.1.4.1.637.61.1.56.13.1.12 |
||||||||||||
|
dsx1PWTDMECIDTDMToEthmandatory
ECID (Emulated Circuit Identifer) 20 bit field Tdm2Eth.
ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 0..1048575 DEFVALUE: NA UNITS: NA SPARSE: NO… |
Integer32r/w Constraints: range: 0-1048575 |
.1.3.6.1.4.1.637.61.1.56.13.1.13 |
||||||||||||
|
dsx1PWTDJitterBufferSizemandatory
Jitter Buffer Queue size. Actual size + configurable size + 1. Example configuring size of 7 mean buffer size of 8 packets
ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA … |
Integer32r/w Constraints: range: 0-1023 |
.1.3.6.1.4.1.637.61.1.56.13.1.14 |
||||||||||||
|
dsx1PWTDMConsequenceNumbermandatory
New Sequence number
ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 0...7 DEFVALUE: NA UNITS: NA SPARSE: NO DESCR: NA |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.637.61.1.56.13.1.15 |
||||||||||||
|
dsx1PWTDMClockmandatory
TDM_clock_strategy.
00: differential mode; 01: loop back mode; 10:reference Node time mode; 11: adaptive mode. ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 2 DEFVALUE: 2 UNITS: NA… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.13.1.16 |
||||||||||||
|
dsx1PWTDMFPGAVersionmandatory
FPGA software version.
ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: NA DEFVALUE: NA UNITS: NA SPARSE: NO DESCR: NA |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.637.61.1.56.13.1.17 |
||||||||||||
|
dsx1PWTDMRowStatusmandatory
This object is used to create a new row or delete an
existing row in this table. The possible valid values are: (1) active (4) createdAndGo (6) destroy To create an entry in this table, this object should be set t… |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.637.61.1.56.13.1.18 |
||||||||||||
|
dsx1PWTDMConfStatemandatory
PWTDM Configuration state bitmap.
bit 0: high value indicates Channel Configuration fail bit 1: high value indicates RTP modeSourceAddress PointerConfiguration fail bit 2: high value indicates Packet length Config… |
Integer32 Constraints: range: 0-8191 |
.1.3.6.1.4.1.637.61.1.56.13.1.19 |
.1.3.6.1.4.1.637.61.1.56.14
·
1 row entry
·
4 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk dsx1LineInterfaceUnitTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-SFP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-SFP-MIB::dsx1LineInterfaceUnitTable'
This table contains the 2E1/DS1 SFP Line Interface Unit configuration information. ALCATEL NOTE: TABLESIZE: 4
Each entry consists of a list of 2E1/DS1 SFP Line Interface Unit parameters.
A row entry is created or deleted in this table when the corresponding
operation on a row is done in dsx1PWTDMConfigTable
A row entry is created or deleted in this table when the corresponding
operation on a row is done in dsx1PWTDMConfigTable
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
dsx1SfpLIUConfLinemandatory
This bit selects the E1 or T1/J1 operation mode globally.
0: E1 mode is selected. 1: T1/J1 mode is selected. Note: After bit T1/E1 is changed: Before accessing any other regisers a delay of 50us is required to allow th… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.14.1.1 |
||||
|
dsx1SfpLIURxSensitivitymandatory
0: Receive equalizer off (short haul receiver)
1: Receive equalizer on (long haul receiver) ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 0,1 DEFVALUE: 0 UNITS: NA SPARSE: NO DESC… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.14.1.2 |
||||
|
dsx1SfpLIUTxConfigmandatory
These bits select the transmit template/LBO for short-haul/long-haul applications.
value T1/E1/J1 TCLK Cable Cable range/ Allowable Cable impedance LBO loss 0001 E1 … |
Integer32r/w Constraints: range: 1-12 |
.1.3.6.1.4.1.637.61.1.56.14.1.3 |
||||
|
dsx1SfpLIUConfStatemandatory
Line Interface Unit Configuration state bitmap.
bit 0: high value indicates ConfLine Configuration fail bit 1: high value indicates Receiver Sensitivity Configuration fail bit 2: high value indicates Transmitter Confi… |
Integer32 Constraints: range: 0-7 |
.1.3.6.1.4.1.637.61.1.56.14.1.4 |
.1.3.6.1.4.1.637.61.1.56.15
·
1 row entry
·
5 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk dsx1FramerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-SFP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-SFP-MIB::dsx1FramerTable'
This table contains the 2E1/DS1 SFP Framer configuration.
ALCATEL NOTE:
TABLESIZE: 5
Each entry consists of a list of 2E1/DS1 SFP Framer parameters.
A row entry is created or deleted in this table when the corresponding
operation on a row is done in dsx1PWTDMConfigTable
A row entry is created or deleted in this table when the corresponding
operation on a row is done in dsx1PWTDMConfigTable
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
dsx1FramerGenConfigmandatory
Generai Configuration bitmap.
bit 0: Framed (1) or unframed (0) TDM traffic selection bit 1: RAI transparent (only for E1) RAI: Remote Alarm Indication defined in E1 where it is derived from the NFAS A bit. bit 2: R… |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.637.61.1.56.15.1.1 |
|
dsx1FramerLIU2IWFConfigmandatory
Line Interface unit to Inter working Function Configuration bitmap.
bit 0: Enable performance monitoring toward IWF bit 1: Enable AIS toward IWF bit 2: Enable RAI (Remote Alarm Indication) toward IWF (only for E1) bi… |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.637.61.1.56.15.1.2 |
|
dsx1FramerIWF2LIUConfigmandatory
Generai Configuration bitmap.
bit 0: Enable performance monitoring toward LIU bit 1: Enable AIS toward LIU bit 2: Enable RAI toward LIU (only for E1) bit 3: Enable REI toward LIU (only for E1) bit 4: Force RAI toward … |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.637.61.1.56.15.1.3 |
|
dsx1FramerAlarmStatusmandatory
Alarm Status bitmap. High value indicates an alarm has occured
Bit 0 : CRC4 (Cylic Redundancy check-4) threshold alarm from LIU (only for E1) Bit 1 : CRC4 (Cylic Redundancy check-4) alarm from LIU (only for E1) Bit 2 … |
Integer32 Constraints: range: 0-262143 |
.1.3.6.1.4.1.637.61.1.56.15.1.4 |
|
dsx1FramerConfStatemandatory
Framer Configuration state bitmap.
bit 0: high value indicates General Configuration fail bit 1: high value indicates LIU2IWF Configuration fail bit 2: high value indicates IWF2LIU Configuration fail A… |
Integer32 Constraints: range: 0-7 |
.1.3.6.1.4.1.637.61.1.56.15.1.5 |
.1.3.6.1.4.1.637.61.1.56.16
·
1 row entry
·
11 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk dsx1PWTDMProtocolEngineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-SFP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-SFP-MIB::dsx1PWTDMProtocolEngineTable'
This table contains the 2E1/DS1 SFP protocol engine configuration information. ALCATEL NOTE: TABLESIZE: 11 DESCR: This Table is not supported, handled internally in the sfp hardware.
Each entry consists of a list of 2E1/DS1 SFP protocol engine parameters.
| Column | Syntax | OID |
|---|---|---|
|
dsx1SfpProtLogicalSlotmandatory
This is the first index of the dsx1sfpLogicalSlot.
Normally, this object contains the Logical Slot ID (as defined in the Equipment MIB) of the card which has the SFP cage of interest on its faceplate. I… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.16.1.1 |
|
dsx1SfpProtFaceplateNumbermandatory
This is the second index of the dsx1PWTDMProtocolEngineTable.
It is the number of the SFP cage, as shown on the card faceplate. If the faceplate cage number is zero, sfpDiagSfpFaceplateNumber=0 is used (i.e. zero is… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.16.1.2 |
|
dsx1PWTDMProtocolEngineDA1mandatory
MAC Destination Address 1 in DA pool (for Eth2TDM packet discard, verify whether
received packets DA is equal to this DA pool or not) ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: YES INS… |
.1.3.6.1.4.1.637.61.1.56.16.1.3 |
|
|
dsx1PWTDMProtocolEngineDA2mandatory
MAC Destination Address 2 in DA pool (for Eth2TDM packet discard, verify whether
received packets DA is equal to this DA pool or not) ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: YES INS… |
.1.3.6.1.4.1.637.61.1.56.16.1.4 |
|
|
dsx1PWTDMProtocolEngineDA3mandatory
MAC Destination Address 3 in DA pool (for Eth2TDM packet discard, verify whether
received packets DA is equal to this DA pool or not) ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: YES INS… |
.1.3.6.1.4.1.637.61.1.56.16.1.5 |
|
|
dsx1PWTDMProtocolEngineDA4mandatory
MAC Destination Address 4 in DA pool (for Eth2TDM packet discard, verify whether
received packets DA is equal to this DA pool or not) ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: YES INS… |
.1.3.6.1.4.1.637.61.1.56.16.1.6 |
|
|
dsx1PWTDMProtocolEngineSA1mandatory
MAC Source Address 1 in SA pool (TDM2Eth, config SA on per PW basis)
ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: NA DEFVALUE: 0 UNITS: NA SPARSE… |
.1.3.6.1.4.1.637.61.1.56.16.1.7 |
|
|
dsx1PWTDMProtocolEngineSA2mandatory
MAC Source Address 2 in SA pool (TDM2Eth, config SA on per PW basis)
ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: NA DEFVALUE: 0 UNITS: NA SPARSE… |
.1.3.6.1.4.1.637.61.1.56.16.1.8 |
|
|
dsx1PWTDMProtocolEngineSA3mandatory
MAC Source Address 3 in SA pool (TDM2Eth, config SA on per PW basis)
ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: NA DEFVALUE: 0 UNITS: NA SPARSE… |
.1.3.6.1.4.1.637.61.1.56.16.1.9 |
|
|
dsx1PWTDMProtocolEngineSA4mandatory
MAC Source Address 4 in SA pool (TDM2Eth, config SA on per PW basis)
ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: NA DEFVALUE: 0 UNITS: NA SPARSE… |
.1.3.6.1.4.1.637.61.1.56.16.1.10 |
|
|
dsx1RTPPayloadtypemandatory
RTP payload type mode.
00 - PayloadType=all 0s, SSID=all 1s 01 - PayloadType=all 1s, SSID=all 1s 10 - PayloadType= ecid(18 downto 12), SSID=ecid 11 - PayloadType= vlan_id(6 downto 0), SSID= x0000 & vlan_id … |
Integer32 Constraints: range: 0-3 |
.1.3.6.1.4.1.637.61.1.56.16.1.11 |
.1.3.6.1.4.1.637.61.1.56.17
·
1 row entry
·
5 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk ltHostSfpConfigExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-SFP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-SFP-MIB::ltHostSfpConfigExtTable'
This table contains the host shelf LT SFP configuration information regarding link assignement to LT on FD-REM ALCATEL NOTE: TABLESIZE: 288 (Full FX-8 with FELT-B --> 8 * 36)
Each entry consists of a list of host shelf LT SFP configuration ltHostSfpConfigExtTable.
| Column | Syntax | OID |
|---|---|---|
|
ltHostConfigExtSfpFaceplateNumbermandatory
This is the SFP number on the LT identified by ltHostConfigExtSfpLogSlotId.
ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 1..24 DEFVALUE: NA UNITS: NA SPARSE: NO DESCR: NA |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.17.1.1 |
|
ltHostSfpCableToRackmandatory
This is the Rack ID of the expansion shelf LSM which the SFP
is planned to cable to. Value 0 means that no rack is specified. ALCATEL NOTE: ACCESS: NA USAGE: OPT PERSIST: YES INSRVMOD: YES RANGE: 0..7 … |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.17.1.2 |
|
ltHostSfpCableToShelfmandatory
This is the Shelf ID of the expansion shelf LSM which
the host shelf SFP is planned to cable to. Value 0 means that no shelf is specified. ALCATEL NOTE: ACCESS: NA USAGE: OPT PERSIST: YES INSRVMOD: YES RA… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.17.1.3 |
|
ltHostSfpCableToSlotmandatory
This is the Slot ID of the expansion shelf LSM which
the SFP is planned to cable to. Value 0 means that no slot is specified. ALCATEL NOTE: ACCESS: NA USAGE: OPT PERSIST: YES INSRVMOD: YES RANGE: DEP… |
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.17.1.4 |
|
ltHostConfigSfpLogSlotIdmandatory
The logical slot id of the board where the remote LT is plugged in
ALCATEL NOTE: ACCESS: NA USAGE: OPT PERSIST: YES INSRVMOD: YES RANGE: DEP / depends on the shelf type. DEFVALUE: 0 UNITS: NA… |
ASAM-EQUIP-MIBEqptSlotIndex Type Constraints: range: 1..65535 |
.1.3.6.1.4.1.637.61.1.56.17.1.5 |
.1.3.6.1.4.1.637.61.1.56.18
·
1 row entry
·
10 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk ltHostSfpStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-SFP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-SFP-MIB::ltHostSfpStatusTable'
This table contains the host shelf SFP or XFP status information.
ALCATEL NOTE:
TABLESIZE: 26
Each entry consists of a list of SFP or XFP status parameters.
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ltHostStatusSfpFaceplateNumbermandatory
This is the host shelf SFP or XFP cage number.
For an SFP cage, it is the faceplate number of the SFP cage (e.g. 1). For an XFP cage, it is 256 + (the faceplate number of the XFP cage). For example, if the XFP cage has… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.18.1.1 |
||||||||||||||||||||
|
ltLanxPortNumbermandatory
This is the Physical LANX or IHUB port to which the SFP or XFP is
connected to. For an SHUB system, the lanxPortNumber here corresponds to lanxInterfaceIndex in the LANX MIB. For an IHUB system, the lanxPortNumber to… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.18.1.2 |
||||||||||||||||||||
|
ltHostSfpDownlinkStatusmandatory
This is the host shelf SFP or XFP status.
ok (1): The SFP or XFP is operational. sfpNotPresent (2): The SFP or XFP cage is empty. los (3): The SFP or XFP has detected Loss… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.18.1.3 |
||||||||||||||||||||
|
ltHostSfpCabledToRackmandatory
This is the Rack ID of the expansion shelf LSM to which the host shelf SFP
is cabled to. Value 0 means that SFP is not cabled to any expansion shelf LSM. ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: NO INSRV… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.18.1.4 |
||||||||||||||||||||
|
ltHostSfpCabledToShelfmandatory
This is the Shelf ID of the expansion shelf LSM which the host shelf
SFP is cabled to. Value 0 means that SFP is not cabled to any expansion shelf LSM. ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: NO INSRVM… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.18.1.5 |
||||||||||||||||||||
|
ltHostSfpCabledToSlotmandatory
This is the Slot ID of the expansion shelf LSM which the host shelf SFP
is cabled to. Value 0 means that SFP is not cabled to any expansion shelf LSM. ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: NO INSRVMO… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.18.1.6 |
||||||||||||||||||||
|
ltHostSfpTypemandatory
This variable indicates the type of the SFP or XFP, as read from the
device. It is a bitmap represented as a sum, therefore, it can represent multiple types (combination of types) simultaneously. The SFP type bits (0..… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.637.61.1.56.18.1.7 |
||||||||||||||||||||
|
ltHostSfpCablingMismatchmandatory
This is the host shelf SFP cabling mismatch status:
noMismatch(1): no cabling mismatch is detected. unexpectedRemoteLt(2): a remote LT is detected at an unassigned downlink SFP po… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.637.61.1.56.18.1.8 |
||||||||||||||||||||
|
ltHostSfpCabledToPhysAddressmandatory
The physical (MAC) address of the remote interface that is
cabled to this host shelf SFP. If the remote interface does not have such an address or the address is not yet discovered, this object would contain an octet st… |
RFC1213-MIBPhysAddress | .1.3.6.1.4.1.637.61.1.56.18.1.9 |
||||||||||||||||||||
|
ltHostStatusSfpLogSlotIdmandatory
The logical slot id of the board where the remote LT is plugged in
ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: NA DEFVALUE: NA UNITS: NA SPARSE: NO… |
ASAM-EQUIP-MIBEqptSlotIndex Type Constraints: range: 1..65535 |
.1.3.6.1.4.1.637.61.1.56.18.1.10 |