sfpDiagTemperature

OBS ✓
ASAM-SFP-MIB · .1.3.6.1.4.1.637.61.1.56.5.1.10
Commands MIB view Table view

Object

column mandatory SNMPv2-TCDisplayString 
A column in the sfpDiagTable, containing the freshly-measured 
temperature of the specified SFP, encoded into a string.
              
Two types of values are supported.  In the following text, 
strings are enclosed in single quotes (a double quote marks the 
end of the DESCRIPTION field).  
              
1.  '-128.00 degrees Celsius' to '128.00 degrees Celsius', 
    in 0.01 degrees Celsius increments.  
    Note that ' degrees Celsius' is included in the string.
              
2.  'Not Available'.  The measurement could not be obtained  
    (e.g. the specified SFP cage is empty).
              
The temperature can be retrieved from an electrical SFP, so 
there is no need for a 'Not Applicable' string.
              
ALCATEL NOTE:
    ACCESS: RO
    USAGE: NA
    PERSIST: NO 
    INSRVMOD: NO
    RANGE: NA
    DEFVALUE: NA
    UNITS: NA 
    SPARSE: NO
    DESCR: NA
Observium directly uses this object
This object is referenced by an Observium discovery or polling workflow.
Used in: Sensors
Explore Observium network monitoring

Context

MIB
ASAM-SFP-MIB
OID
.1.3.6.1.4.1.637.61.1.56.5.1.10
Type
column
Access
readonly
Status
mandatory
Parent
sfpDiagEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-SFP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-SFP-MIB::sfpDiagTemperature'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'ASAM-SFP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-SFP-MIB::sfpDiagTemperature.<sfpDiagLogicalSlot>.<sfpDiagSfpFaceplateNumber>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'ASAM-SFP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ASAM-SFP-MIB::sfpDiagTemperature'

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString
Display format
255a
Type Description
Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints
range: 0..255