AIRESPACE-WIRELESS-MIB Table View

Ess(WLAN) Configuration Table indexed by bsnDot11EssIndex.
Maximum of 17 WLANs can be created on Airespace Switch. 
bsnDot11EssIndex of 17 is reserved for WLAN for Third Party 
APs(non-Airespace APs).

bsnDot11EssEntry row .1.3.6.1.4.1.14179.2.1.1.1

An entry in bsnDot11EssTable

Indexes

No indexes recorded

Column	Syntax	OID
bsnDot11EssIndex Index of the Ess(WLAN) within Airespace Switch. Airespace Switch supports 517 ESS(Wlans) so index will be from 1 to 517. 517 is to be used for ESS(WLAN) created for support of Third Party APs(non-Airespace APs)	Unsigned32r/w	.1.3.6.1.4.1.14179.2.1.1.1.1
bsnDot11EssSsid SSID assigned to ESS(WLAN)	OctetStringr/w	.1.3.6.1.4.1.14179.2.1.1.1.2
bsnDot11EssSessionTimeout Maximum time of a Mobile Station session. Value of 0 means infinite time(no timeout set).	Unsigned32r/w	.1.3.6.1.4.1.14179.2.1.1.1.4
bsnDot11EssMacFiltering A type of security policy for Mobile Stations (Clients). Select to filter clients by MAC address. By selecting this Security, you need to create MacFilters in bsnUsersTable or have MacFilters configured on Radius Ser…	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.5
bsnDot11EssAdminStatus Administrative Status of ESS(WLAN). By disabling an ESS the corresponding SSID is no longer broadcasted in AP beacons.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.6
bsnDot11EssSecurityAuthType Type of 802.11 Authentication.	Enumeration	.1.3.6.1.4.1.14179.2.1.1.1.7
bsnDot11EssStaticWEPSecurity Status of Static WEP Security policy. If enabled, WEP Encryption WEP Default Key, Key Index and Key Format should also be specified.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.8
bsnDot11EssStaticWEPEncryptionType Type of Static WEP Encryption. Length of key specified in Default Key depends on this attribute.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.9
bsnDot11EssStaticWEPDefaultKey Static WEP Default Key. For wep104 encryption either 26 bit hex key or 13 bit ascii key should be specified. For wep40 encryption 10 bit hex key or 5 bit ascii key should be specified. For wep128 encryption 32 bit he…	WEPKeytyper/w Type Constraints: range: 4..32	.1.3.6.1.4.1.14179.2.1.1.1.10
bsnDot11EssStaticWEPKeyIndex According to 802.11 standard 4 keys are supported. So 802.11 Mobile Stations(Client) can have upto 4 keys from 1 to 4. The read-only value zero indicates that there is no WEP Authentication key information available.T…	Integer32r/w	.1.3.6.1.4.1.14179.2.1.1.1.11
bsnDot11EssStaticWEPKeyFormat This is not persistant.Reading this attribute will always return default. The format of the key specified in Airespace switch keeps record of the Index.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.12
bsnDot11Ess8021xSecurity Status of 802.1X security policy.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.13
bsnDot11Ess8021xEncryptionType Type of 802.1X Encryption. This applies if bsnDot11Ess8021xSecurity is in enabled state.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.14
bsnDot11EssWPASecuritydeprecated Status of WPA security policy. This has been deprecated for cLWSecDot11EssCckmTable.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.16
bsnDot11EssWPAEncryptionTypedeprecated Type of WPA Encryption. This applies when bsnDot11EssWPASecurity is in enable state. This has been deprecated for cLWSecDot11EssCckmTable.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.17
bsnDot11EssIpsecSecurity Status of IpSec (VPN) security policy. Note that this cannot be applied with Web security policy.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.18
bsnDot11EssVpnEncrTransform The Encryption algorithm employed by this Vpn(IpSec) Encryption. This applies only when bsnDot11EssIpsecSecurity is in enable state.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.19
bsnDot11EssVpnAuthTransform The Hash algorithm employed by the Vpn Encrpytion. This applies only when bsnDot11EssIpsecSecurity is in enable state.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.20
bsnDot11EssVpnIkeAuthMode The authentication type of the SA. It could be a certificate or a pre-shared key or xauthEnablePsk. This applies only when bsnDot11EssIpsecSecurity is in enable state.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.21
bsnDot11EssVpnSharedKey VPN Shared Key. This applies only when bsnDot11EssVpnSharedKey is in enable state and bsnDot11EssVpnIkeAuthMode is xauthEnablePsk or presharedKey.	OctetStringr/w	.1.3.6.1.4.1.14179.2.1.1.1.22
bsnDot11EssVpnSharedKeySize VPN Shared Key size. This applies only when bsnDot11EssVpnSharedKey is in enable state and bsnDot11EssVpnIkeAuthMode is xauthEnablePsk or presharedKey.	Unsigned32	.1.3.6.1.4.1.14179.2.1.1.1.23
bsnDot11EssVpnIkePhase1Mode VPN IKE Phase 1 Mode type as per the IpSec standards. This applies only when bsnDot11EssIpsecSecurity is in enable state.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.24
bsnDot11EssVpnIkeLifetime Vpn IKE's Lifetime. This applies only when bsnDot11EssIpsecSecurity is in enable state.	Integer32r/w	.1.3.6.1.4.1.14179.2.1.1.1.25
bsnDot11EssVpnIkeDHGroup IKE's Diffie-Hellman Group. This applies only when bsnDot11EssIpsecSecurity is in enable state.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.26
bsnDot11EssIpsecPassthruSecurity Status of IpSec Passthru security policy.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.27
bsnDot11EssVpnPassthruGateway Ip address of VpnPassthru Gateway. This applies only when bsnDot11EssIpsecPassthruSecurity is in enable state.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.2.1.1.1.28
bsnDot11EssWebSecurity Status of Web security policy. Note this policy cannot be applied with IpSec security policy.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.29
bsnDot11EssRadioPolicy Radio Policy for a WLAN. It can either be All where it will be applicable to ALL types of protocols or it can be set to apply to combinations of 802.11a, 802.11b, 802.11g.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.30
bsnDot11EssQualityOfService Quality of Service for a WLAN.Services such as VoIP should be set to Gold while non-discriminating services such as messaging can be set to Bronze.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.31
bsnDot11EssDhcpRequired DHCP required for all clients on this WLAN	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.32
bsnDot11EssDhcpServerIpAddress IP Address of the DHCP Server. Make it 0.0.0.0 to disable DHCP Relay. Any value other than 0.0.0.0, it will be assumed that DHCP Relay is turned on.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.2.1.1.1.33
bsnDot11EssVpnContivityMode Specifies if contivity mode for the IpSec is enabled. If enabled, user needs to specify the Quote of the Day Server's IPAddress in bsnDot11EssVpnQotdServerAddress.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.34
bsnDot11EssVpnQotdServerAddress IP Address of the Quote of the Day Server.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.2.1.1.1.35
bsnDot11EssBlacklistTimeout Set the timeout for excluded Mobile Stations after which the mobile station will be automatically de-authenticated. Mobile Station excluded by MAC address and their status can be obtained from bsnMobileStationStatus.…	Integer32r/w	.1.3.6.1.4.1.14179.2.1.1.1.37
bsnDot11EssNumberOfMobileStations No of Mobile Stations currently associated with the WLAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.1.1.1.38
bsnDot11EssWebPassthru For switches with version before 2.0: This is applicable only when the Web Security Type is enabled. When this attribute is enabled, it allows a client's NetBIOS packets to go through the switch before web auth is comp…	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.39
bsnDot11EssCraniteSecurity Status of Cranite Passthrough Security policy. If enabled, no other security can be enabled.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.40
bsnDot11EssBlacklistingCapability This is the flag that can enable or disable the client exclusion feature for a WLAN. If enabled, the clients can be excluded by the Switch in case of repetitive auth failure and other reasons like it. If disabled, the …	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.41
bsnDot11EssInterfaceName Name of the interface used by this WLAN. By default it is set to be the management interface.	OctetStringr/w	.1.3.6.1.4.1.14179.2.1.1.1.42
bsnDot11EssAclName Name of ACL for the WLAN. This is applicable only when Web Authentication is enabled as a security. An empty string value indicates that no ACL has been set (which is a valid option)	OctetStringr/w	.1.3.6.1.4.1.14179.2.1.1.1.43
bsnDot11EssAAAOverride Enable or Disable AAA override for the global WLAN parameters.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.44
bsnDot11EssWPAAuthKeyMgmtModedeprecated Enable or Disable WPA Pre-shared Key Mode. If enabled, a preshared key should be set for WPA authentication. This has been deprecated for cLWSecDot11EssCckmTable.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.45
bsnDot11EssWPAAuthPresharedKeydeprecated WPA Authentication Preshared Key. This applies only when bsnDot11EssWPAAuthKeyMgmtMode is in enable state. This has been deprecated for cLWSecDot11EssCckmTable.	OctetStringr/w	.1.3.6.1.4.1.14179.2.1.1.1.46
bsnDot11EssFortressSecurity Status of Fortress Passthrough Security policy. If enabled, no other security can be enabled.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.47
bsnDot11EssWepAllowSharedKeyAuth Enable this flag to allow Shared Key Authentication when Static WEP is enabled.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.48
bsnDot11EssL2tpSecurity Status of L2TP security policy. Note that this cannot be applied with Web security policy, Cranite or Fortress policy.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.49
bsnDot11EssWPAAuthPresharedKeyHexdeprecated WPA Authentication Preshared Key in the hex format. This applies only when bsnDot11EssWPAAuthKeyMgmtMode is in enable state. This has been deprecated for cLWSecDot11EssCckmTable.	OctetStringr/w	.1.3.6.1.4.1.14179.2.1.1.1.50
bsnDot11EssBroadcastSsid This attribute when enabled allows the switch to broadcast this SSID.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.51
bsnDot11EssExternalPolicyValidation This attribute specifies if external policy servers will be used for validation. If no servers are configured in bsnExternalPolicyServerTable then it cannot be enabled.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.52
bsnDot11EssRSNSecuritydeprecated This attribute specifies status of RSN Security Policy. This has been deprecated for cLWSecDot11EssCckmTable.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.53
bsnDot11EssRSNWPACompatibilityModedeprecated This attribute specifies RSN security's compatibility mode with WPA. This has been deprecated for cLWSecDot11EssCckmTable.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.54
bsnDot11EssRSNAllowTKIPClientsdeprecated This attribute specifies whether TKIP clients are allowed by RSN Policy. This has been deprecated for cLWSecDot11EssCckmTable.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.55
bsnDot11EssRSNAuthKeyMgmtModedeprecated This attribute specifies whether Preshared key is used or not. If used user should specify a key between 8 and 63 characters in bsnDot11EssRSNAuthPresharedKey attribute. This has been deprecated for cLWSecDot11EssCckmT…	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.56
bsnDot11EssRSNAuthPresharedKeydeprecated RSN Authentication Preshared Key. This applies only when bsnDot11EssRSNAuthKeyMgmtMode is in enable state. This has been deprecated for cLWSecDot11EssCckmTable.	OctetStringr/w	.1.3.6.1.4.1.14179.2.1.1.1.57
bsnDot11EssRSNAuthPresharedKeyHexdeprecated RSN Authentication Preshared Key in the hex format. This applies only when bsnDot11EssWPAAuthKeyMgmtMode is in enable state. This has been deprecated for cLWSecDot11EssCckmTable.	OctetStringr/w	.1.3.6.1.4.1.14179.2.1.1.1.58
bsnDot11EssIPv6Bridgingdeprecated When enabled, IPv6 bridging is applied on the packets.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.59
bsnDot11EssRowStatus A row status type for the bsnDot11EssEntry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.14179.2.1.1.1.60
bsnDot11EssWmePolicySetting When enabled, WME Policy is applied on the packets.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.61
bsnDot11Ess80211ePolicySetting When enabled, 802.11e Policy is applied on the packets.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.62
bsnDot11EssWebPassthroughEmail When enabled, along with the bsnDot11EssWebPassthru attribute, the client is allowed to connect by entering his/her email address on the web connection page. There is no further authentication required.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.63
bsnDot11Ess7920PhoneSupport When client cac limit is enabled, the 7920 Phones with old software where the Call Admission Control (CAC) Limit is Specified on the client will be supported on the WLAN. The support for clientCacLimit (by setting to …	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.1.1.64
bsnDot11EssNumApsUp It indicates the number of AP's that are broadcasting specific WLAN.Access point shall be considered up if it broadcasts specific WLAN on atleast one slot.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.1.1.1.66
bsnDot11EssNumApsDown It indicates the number of AP's that are not broadcasting WLAN per AP on either of the slots.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.1.1.1.67
bsnDot11EssRadiusAuthPrimaryServer Primary Radius Authentication Server for this wlan.	OctetStringr/w	.1.3.6.1.4.1.14179.2.1.1.1.95
bsnDot11EssRadiusAuthSecondaryServer Secondary Radius Authentication Server for this wlan.	OctetStringr/w	.1.3.6.1.4.1.14179.2.1.1.1.96
bsnDot11EssRadiusAuthTertiaryServer Tertiary Radius Authentication Server for this wlan.	OctetStringr/w	.1.3.6.1.4.1.14179.2.1.1.1.97
bsnDot11EssRadiusAcctPrimaryServer Primary Radius Accounting Server for this wlan.	OctetStringr/w	.1.3.6.1.4.1.14179.2.1.1.1.98
bsnDot11EssRadiusAcctSecondaryServer Secondary Radius Accounting Server for this wlan.	OctetStringr/w	.1.3.6.1.4.1.14179.2.1.1.1.99
bsnDot11EssRadiusAcctTertiaryServer Tertiary Radius Accounting Server for this wlan.	OctetStringr/w	.1.3.6.1.4.1.14179.2.1.1.1.100

Mobile Station Table indexed by bsnMobileStationMacAddress.
(Mobile Station is better referred to as Client in the current
 releases.)

bsnMobileStationEntry row .1.3.6.1.4.1.14179.2.1.4.1

An entry in bsnMobileStationTable.

Indexes

No indexes recorded

Column	Syntax	OID
bsnMobileStationMacAddress 802.11 MAC Address of the Mobile Station.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.14179.2.1.4.1.1
bsnMobileStationIpAddress IP Address of the Mobile Station	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.14179.2.1.4.1.2
bsnMobileStationUserName User Name,if any, of the Mobile Station. This would be non empty in case of Web Authentication and IPSec.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.14179.2.1.4.1.3
bsnMobileStationAPMacAddr 802.11 Mac Address of the AP to which the Mobile Station is associated.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.14179.2.1.4.1.4
bsnMobileStationAPIfSlotId Slot ID of AP Interface to which the mobile station is associated. The value 15 is used to indicate that the slot Id is invalid.	Integer32	.1.3.6.1.4.1.14179.2.1.4.1.5
bsnMobileStationEssIndex Ess Index of the Wlan(SSID) that is being used by Mobile Station to connect to AP	Integer32	.1.3.6.1.4.1.14179.2.1.4.1.6
bsnMobileStationSsid The SSID Advertised by Mobile Station	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.14179.2.1.4.1.7
bsnMobileStationAID AID for the mobile station	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.1.4.1.8
bsnMobileStationStatus Status of the mobile station	Enumeration	.1.3.6.1.4.1.14179.2.1.4.1.9
bsnMobileStationReasonCode Reason Code as defined by 802.11 standards	Enumeration	.1.3.6.1.4.1.14179.2.1.4.1.10
bsnMobileStationMobilityStatus Mobility Role of the Mobile Station.	Enumeration	.1.3.6.1.4.1.14179.2.1.4.1.11
bsnMobileStationAnchorAddress If the Mobility Status of the Mobile Station is Anchor then it will have Peer Ip Address and will have Anchor IP if the Role is Foreign	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.14179.2.1.4.1.12
bsnMobileStationCFPollable When this attribute is true, it shall indicate that the Mobile Station is able to respond to a CF-Poll with a data frame within a SIFS time. This attribute shall be false if the Mobile Station is not able to respond t…	Enumeration	.1.3.6.1.4.1.14179.2.1.4.1.13
bsnMobileStationCFPollRequest Specifies whether CFP is requested by Mobile Station or not	Enumeration	.1.3.6.1.4.1.14179.2.1.4.1.14
bsnMobileStationChannelAgilityEnabled This attribute indicates that the PHY channel agility functionality is enabled.	Enumeration	.1.3.6.1.4.1.14179.2.1.4.1.15
bsnMobileStationPBCCOptionImplemented This attribute, when true, shall indicate that the PBCC modulation option as defined in subclause 18.4.6.6 is implemented. The default value of this attribute shall be false.	Enumeration	.1.3.6.1.4.1.14179.2.1.4.1.16
bsnMobileStationShortPreambleOptionImplemented This attribute, when true, shall indicate that the short preamble option as defined in subclause 18.2.2.2 is implemented. The default value of this attribute shall be false.	Enumeration	.1.3.6.1.4.1.14179.2.1.4.1.17
bsnMobileStationSessionTimeout Session Timeout of Mobile station	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.1.4.1.18
bsnMobileStationAuthenticationAlgorithm Authentication Algorithm of Mobile Station	Enumeration	.1.3.6.1.4.1.14179.2.1.4.1.19
bsnMobileStationWepState WEP State of Mobile Station	Enumeration	.1.3.6.1.4.1.14179.2.1.4.1.20
bsnMobileStationPortNumber The Port Number of this Airespace Switch on which the traffic of the Mobile Station is coming through.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.1.4.1.21
bsnMobileStationDeleteAction Action to Deauthenticate the Mobile Station. Set the State to delete.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.4.1.22
bsnMobileStationPolicyManagerState Policy Manager State of the mobile station.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.14179.2.1.4.1.23
bsnMobileStationSecurityPolicyStatus When this attribute has value completed, it shall indicate that the Mobile Station has completed the security policy checks. Otherwise the checks are yet to be completed.	Enumeration	.1.3.6.1.4.1.14179.2.1.4.1.24
bsnMobileStationProtocol The 802.11 protocol type of the client. The protocol is mobile when this client detail is seen on the anchor i.e it's mobility status is anchor.	Enumeration	.1.3.6.1.4.1.14179.2.1.4.1.25
bsnMobileStationMirrorMode If enabled, then mirroring for this client will be statically configured irrespective of the AP and the port this client is on.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.4.1.26
bsnMobileStationInterface Name of the Interface of the mobile client to the switch.	OctetString	.1.3.6.1.4.1.14179.2.1.4.1.27
bsnMobileStationApMode Mode of the AP to which the Mobile Station is associated.	Enumeration	.1.3.6.1.4.1.14179.2.1.4.1.28
bsnMobileStationVlanId Vlan ID of the Interface to which the client is associated.	Integer32	.1.3.6.1.4.1.14179.2.1.4.1.29
bsnMobileStationPolicyType Mode of the AP to which the Mobile Station is associated.	Enumeration	.1.3.6.1.4.1.14179.2.1.4.1.30
bsnMobileStationEncryptionCypher Mode of the AP to which the Mobile Station is associated.	Enumeration	.1.3.6.1.4.1.14179.2.1.4.1.31
bsnMobileStationEapType Mode of the AP to which the Mobile Station is associated.	Enumeration	.1.3.6.1.4.1.14179.2.1.4.1.32
bsnMobileStationCcxVersion Represents the Cisco Compatible Extensions (CCX) Version the client is using for communication with the AP.	Enumeration	.1.3.6.1.4.1.14179.2.1.4.1.33
bsnMobileStationE2eVersion Represents the End-2-End Version the client is using for communication with the AP.	Enumeration	.1.3.6.1.4.1.14179.2.1.4.1.34
bsnMobileStationStatusCode Status Code of the Mobile Station	Integer32	.1.3.6.1.4.1.14179.2.1.4.1.42
bsnMobileStationAAAOverridePassphrase Flag to check wheather AAA override passphrase is enabled for a MAB+PSK client or not.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.14179.2.1.4.1.43

Mobile Station Per Radio Per VAP(WLAN) Table. This table
lists all Mobile Stations on a particular Airespace AP 
Interface for a particular ESS(Wlan). It only lists MAC 
Addresses. Further details for a Mobile Station can be found 
from bsnMobileStationTable once the MAC Address is knonwn.
(Mobile Station is better referred to as Client in the 
 current releases.)

bsnMobileStationPerRadioPerVapEntry row .1.3.6.1.4.1.14179.2.1.5.1

An entry in MobileStationPerRadioPerVapTable.

Indexes

No indexes recorded

Column	Syntax	OID
bsnMobileStationPerRadioPerVapIndex The index of Mobile Station. The index starts from 1 and goes upto the total number of Mobile Stations on Airespace Radio Interface for a specific ESS (Wlan).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.1.5.1.1
bsnMobileStationMacAddr The MAC Address of Mobile Station.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.14179.2.1.5.1.20

Mobile Station Statistics Table.
(Mobile Station is better referred to as Client in the current 
 releases.)

bsnMobileStationStatsEntry row .1.3.6.1.4.1.14179.2.1.6.1

An entry in bsnMobileStationStatsTable.

Indexes

No indexes recorded

Column	Syntax	OID
bsnMobileStationRSSI Average packet RSSI for the Mobile Station.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.1.6.1.1
bsnMobileStationBytesReceived Bytes received from Mobile Station	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.14179.2.1.6.1.2
bsnMobileStationBytesSent Bytes sent to Mobile Station	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.14179.2.1.6.1.3
bsnMobileStationPolicyErrors Number of Policy Errors for Mobile Station	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.14179.2.1.6.1.4
bsnMobileStationPacketsReceived Packets received from Mobile Station	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.14179.2.1.6.1.5
bsnMobileStationPacketsSent Packets sent to Mobile Station	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.14179.2.1.6.1.6
bsnMobileStationSnr Signal to noise Ratio of the Mobile Station.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.1.6.1.26

Rogue Table. This table lists all the Rogue APs detected by
Airespace APs.

bsnRogueAPEntry row .1.3.6.1.4.1.14179.2.1.7.1

An Entry in bsnRogueAPTable.

Indexes

No indexes recorded

Column	Syntax	OID
bsnRogueAPDot11MacAddress MAC Address of Rogue Station.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.14179.2.1.7.1.1
bsnRogueAPTotalDetectingAPs Total number of Airespace APs that detected this rogue.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.1.7.1.2
bsnRogueAPFirstReported Time Stamp when this Rogue was First Detected.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.14179.2.1.7.1.3
bsnRogueAPLastReported Time Stamp when this Rogue was Last Detected.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.14179.2.1.7.1.4
bsnRogueAPContainmentLevel If the state of the rogue is contained, this specifies the level of containment. Higher the level, more the number of detecting APs that are used to contain it. The value must be between 1 to 4 for 'contained' state.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.7.1.5
bsnRogueAPType This attribute specifies if the Rogue is of ad-hoc type or is an AP.	Enumeration	.1.3.6.1.4.1.14179.2.1.7.1.6
bsnRogueAPOnNetwork This attribute specifies if the Rogue is on Wired Network or not.	Enumeration	.1.3.6.1.4.1.14179.2.1.7.1.7
bsnRogueAPTotalClients Total number of Clients detected on this rogue.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.1.7.1.8
bsnRogueAPRowStatus Row Status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.14179.2.1.7.1.9
bsnRogueAPMaxDetectedRSSI This is the max RSSI value of all the detctecting APs, which have detected this rogue.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.1.7.1.10
bsnRogueAPSSID This is the SSID of the rogue detected by Access Point, which has max RSSI value of all the detectecting APs of this rogue.	OctetString	.1.3.6.1.4.1.14179.2.1.7.1.11
bsnRogueAPDetectingAPRadioType Radio type of detecting APs. If the radio type is detected by dot11bg radio or dot11a radio or both.	Bits	.1.3.6.1.4.1.14179.2.1.7.1.12
bsnRogueAPDetectingAPMacAddress MAC Address of of detecting AP which received max RSSI	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.14179.2.1.7.1.13
bsnRogueAPMaxRssiRadioType The radio type of detecting AP which received max RSSI value.	Enumeration	.1.3.6.1.4.1.14179.2.1.7.1.14
bsnRogueAPState This attribute is use to specify the state in which the Rogue AP is user can set the Rogue AP in alert, known or acknowledge state. Alert state means Rogue AP can be a potential threat. Trap will be sent out to trap re…	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.7.1.24
bsnRogueAPClassType The AP class type of the client detected.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.7.1.25
bsnRogueAPChannel This is the channel number of the last detecting APs, which has detected this rogue. Use in conjuction with bsnRogueAPMaxRssiRadioType to resolve ambiguity between channels numbers of 2.4GHz and 5GHz bands versus 6GHz …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.1.7.1.26
bsnRogueAPDetectingAPName AP name of the detecting AP which received max RSSI	OctetStringr/w	.1.3.6.1.4.1.14179.2.1.7.1.27

Rogue Station Table. This table lists all the Airespace AP
Interfaces that detected a particular Rogue.

bsnRogueAPAirespaceAPEntry row .1.3.6.1.4.1.14179.2.1.8.1

An entry in bsnRogueAPAirespaceAPEntry.

Indexes

No indexes recorded

Column	Syntax	OID
bsnRogueAPAirespaceAPMacAddress MAC Address of Airespace AP Interface that Detected the Rogue.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.14179.2.1.8.1.1
bsnRogueAPAirespaceAPSlotId The slot and band index of the Airespace AP Interface that detected the Rogue. Use bsnRogueAPPhysicalAPSlot for Slot ID of the Detecting AP Interface.	Unsigned32	.1.3.6.1.4.1.14179.2.1.8.1.2
bsnRogueAPRadioType The Airespace AP Interface type that detected the Rogue.	Enumeration	.1.3.6.1.4.1.14179.2.1.8.1.3
bsnRogueAPAirespaceAPName Name of Airespace AP Interface that detected the Rogue.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.14179.2.1.8.1.4
bsnRogueAPChannelNumber The advertised Channel Number of the Airespace AP Interface picked up from the Rogue. Use in conjuction with bsnRogueAPRadioType to resolve ambiguity between channels numbers of 2.4GHz and 5GHz bands versus 6GHz band.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.1.8.1.5
bsnRogueAPSsid The SSID Advertised by Rogue Station.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.14179.2.1.8.1.6
bsnRogueAPAirespaceAPRSSI Rogue RSSI as seen by Airespace AP Interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.1.8.1.7
bsnRogueAPContainmentMode If the rogue is in 'contained' state, this attribute shows the containment mode used by the AP.	Enumeration	.1.3.6.1.4.1.14179.2.1.8.1.8
bsnRogueAPContainmentChannelCount The number of channels used for rogue containment.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.1.8.1.9
bsnRogueAPContainmentChannels This is the comma separated string of channels used for rogue containment.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.14179.2.1.8.1.10
bsnRogueAPAirespaceAPLastHeard No of seconds ago when this Rogue was last heard by this AP.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.1.8.1.11
bsnRogueAPAirespaceAPWepMode The WEP mode on this detecting AP.	Enumeration	.1.3.6.1.4.1.14179.2.1.8.1.12
bsnRogueAPAirespaceAPPreamble The Preamble on this detecting AP.	Enumeration	.1.3.6.1.4.1.14179.2.1.8.1.13
bsnRogueAPAirespaceAPWpaMode The WPA mode on this detecting AP.	Enumeration	.1.3.6.1.4.1.14179.2.1.8.1.14
bsnRogueAPAirespaceAPSNR SNR seen by Airespace AP Interface from Rogue	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.1.8.1.27
bsnRogueAPChannelWidth This object represents the channel width of the rogue.	Enumeration	.1.3.6.1.4.1.14179.2.1.8.1.28
bsnRogueAPPhysicalAPSlot Reporting AP Physical Slot ID	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.1.8.1.29

Third Party Access Point Table. An entry needs to be
configured in this table for a third party access point 
that needs to be supported by the Switch. Note: A third
party ESS (Wlan) with ID 17 should be created in 
bsnDot11EssTable before adding entries here.
Please also note that ACS currently supports only 
Aironet 350, 1200 and Orinoco 2000 Access Points as 
third party APs.

bsnThirdPartyAPEntry row .1.3.6.1.4.1.14179.2.1.9.1

An entry in bsnThirdPartyAPTable.

Indexes

No indexes recorded

Column	Syntax	OID
bsnThirdPartyAPMacAddressobsolete MAC Address of Third Party Access Point which is connected directly to this Airespace Switch.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.14179.2.1.9.1.1
bsnThirdPartyAPInterfaceobsolete Interface(Port Number) to which the Third Party AP is connected.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.1.9.1.2
bsnThirdPartyAPIpAddressobsolete Static IP address of the 3rd Party AP, 0.0.0.0 indicating x its using DHCP	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.2.1.9.1.3
bsnThirdPartyAP802Dot1XRequiredobsolete If 802.1X is required for the 3rd Party AP	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.9.1.4
bsnThirdPartyAPMirrorModeobsolete If enabled, then data from all the foreign AP users and all the foreign APs on this APs port will be mirrored. These clients are dynamically added to the switch's mirrored MAC list.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.9.1.5
bsnThirdPartyAPRowStatusobsolete Row Status in the ThirdPartyAPEntry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.14179.2.1.9.1.24

Mobile Station Table indexed by bsnMobileStationByIpAddress.
NOTE: This is just to facilitate the search of mobile 
stations based on IP Address. Doing a get without the index 
doesn't return anything.  (Mobile Station is better referred 
to as Client in the current releases.)

bsnMobileStationByIpEntry row .1.3.6.1.4.1.14179.2.1.10.1

An entry in bsnMobileStationByIpTable.

Indexes

No indexes recorded

Column	Syntax	OID
bsnMobileStationByIpAddress IP Address of the Mobile Station	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.14179.2.1.10.1.1
bsnMobileStationByIpMacAddress 802.11 Mac Address of the Mobile Station.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.14179.2.1.10.1.2

Mobile Station RSSI data Table indexed by
bsnMobileStationMacAddress, 
bsnMobileStationRssiDataApMacAddress, 
bsnMobileStationRssiDataApIfSlotId.
(Mobile Station is better referred to as Client in the 
 current releases.)

bsnMobileStationRssiDataEntry row .1.3.6.1.4.1.14179.2.1.11.1

An entry in bsnMobileStationRssiDataTable.

Indexes

No indexes recorded

Column	Syntax	OID
bsnMobileStationRssiDataApMacAddress 802.11 Mac Address of the AP on which Mobile Station is associated.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.14179.2.1.11.1.1
bsnMobileStationRssiDataApIfSlotId SlotId of APIf on which mobile station is associated	Unsigned32	.1.3.6.1.4.1.14179.2.1.11.1.2
bsnMobileStationRssiDataApIfType The interface type of the radio that sensed the rssi data.	Enumeration	.1.3.6.1.4.1.14179.2.1.11.1.3
bsnMobileStationRssiDataApName The Name of the AP that sensed the rssi data.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.14179.2.1.11.1.4
bsnMobileStationRssiData RSSI seen by Airespace AP Interface for the Mobile Station	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.1.11.1.5
bsnAPIfPhyAntennaIndex Antenna which recived the probe request from client. The antenna which reported the RSSI value for the client. For now value will be 0 to 1, in future it may change.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.1.11.1.6
bsnMobileStationRssiDataLastHeard No of seconds ago when this RSSI data was recorded.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.1.11.1.25

Table of watch listed clients. When clients are added to this
table by username or MAC address, ACS collects data for them 
to show trend reports. The switch generates Client
Association and Client Authentication traps for the watch 
listed clients.The watch list feature can be enbaled or 
diabled by the bsnWatchListFeatureEnable flag on the switch.

bsnWatchListClientEntry row .1.3.6.1.4.1.14179.2.1.12.1

An entry in bsnWatchListClientTable.

Indexes

No indexes recorded

Column	Syntax	OID
bsnWatchListClientKeyobsolete MAC Address or User Name of Client that is to be added to the watch list.	OctetStringr/w	.1.3.6.1.4.1.14179.2.1.12.1.1
bsnWatchListClientTypeobsolete The type of the watch list client entry. The entry can be created by Client MAC Address or by Username.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.12.1.2
bsnWatchListClientRowStatusobsolete A row status type for the bsnWatchListClientEntry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.14179.2.1.12.1.20

Mobile Station Table indexed by the Mobile Station Username
and MAC Address. NOTE: This is just to facilitate the search 
of mobile stations based on User Name. Doing a get without 
the username doesn't return anything. (Mobile Station is 
better referred to as Client in the current releases.)

bsnMobileStationByUsernameEntry row .1.3.6.1.4.1.14179.2.1.13.1

An entry in bsnMobileStationByUsernameTable.

Indexes

No indexes recorded

Column	Syntax	OID
bsnMobileStationByUserName Username of the Mobile Station	OctetString	.1.3.6.1.4.1.14179.2.1.13.1.1
bsnMobileStationByUserMacAddress 802.11 Mac Address of the Mobile Station.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.14179.2.1.13.1.2

Rogue Client Table. This table lists all the Rogue Clients
detected by Airespace APs.

bsnRogueClientEntry row .1.3.6.1.4.1.14179.2.1.14.1

An Entry in bsnRogueClientTable.

Indexes

No indexes recorded

Column	Syntax	OID
bsnRogueClientDot11MacAddress Mac Address of Rogue Station.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.14179.2.1.14.1.1
bsnRogueClientTotalDetectingAPs Total number of Airespace APs that detected this rogue.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.1.14.1.2
bsnRogueClientFirstReported Time Stamp when this Rogue was First Detected.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.14179.2.1.14.1.3
bsnRogueClientLastReported Time Stamp when this Rogue was Last Detected.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.14179.2.1.14.1.4
bsnRogueClientBSSID This attribute specifies BSSID of the Rogue Client.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.14179.2.1.14.1.5
bsnRogueClientContainmentLevel If the state of the rogue is contained, this specifies the level of containment. Higher the level, more the number of detecting APs that are used to contain it. The value must be between 1 to 4 for 'contained' state.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.14.1.6
bsnRogueClientLastHeard Number of seconds ago this rogue client was detected.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.1.14.1.7
bsnRogueClientState This attribute is use to specify the state in which the Rogue AP is. User can set the Rogue Client in alert,known or acknowledge state. Alert state means Rogue Client can be a potential i threat.Trap will be sent out t…	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.14.1.24

Rogue Station Table. This table lists all the Airespace AP
Interface that detected a particular Rogue.

bsnRogueClientAirespaceAPEntry row .1.3.6.1.4.1.14179.2.1.15.1

An entry in bsnRogueClientAirespaceAPEntry.

Indexes

No indexes recorded

Column	Syntax	OID
bsnRogueClientAirespaceAPMacAddress Mac Address of Airespace AP Interface that Detected the Rogue.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.14179.2.1.15.1.1
bsnRogueClientAirespaceAPSlotId The slot and band index of the Airespace AP Interface that detected the Rogue. Use bsnRogueClientPhysicalAPSlot for Slot ID of the Detecting AP Interface.	Unsigned32	.1.3.6.1.4.1.14179.2.1.15.1.2
bsnRogueClientRadioType The advertised SSID that the Airespace AP Interface picked up from the Rogue.	Enumeration	.1.3.6.1.4.1.14179.2.1.15.1.3
bsnRogueClientAirespaceAPName Name of Airespace AP Interface that detected the Rogue.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.14179.2.1.15.1.4
bsnRogueClientChannelNumber The advertised Channel Number of that the Airespace AP Interface picked up from the Rogue. Use in conjuction with bsnRogueClientRadioType to resolve ambiguity between channels numbers of 2.4GHz and 5GHz bands versus 6G…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.1.15.1.5
bsnRogueClientAirespaceAPRSSI RSSI seen by Airespace AP Interface from the Rogue	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.1.15.1.7
bsnRogueClientAirespaceAPLastHeard No of seconds ago when this Rogue was last heard by this AP.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.14179.2.1.15.1.11
bsnRogueClientAirespaceAPSNR SNR seen by Airespace AP Interface from Rogue	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.1.15.1.27
bsnRogueClientPhysicalAPSlot Reporting AP Physical Slot ID	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.1.15.1.28

Rogue Clients for each rogue. This table lists all Rogue
Clients on a particular Rogue.

bsnRogueClientPerRogueAPEntry row .1.3.6.1.4.1.14179.2.1.16.1

An entry in RogueClientPerRogueAPTable.

Indexes

No indexes recorded

Column	Syntax	OID
bsnRogueAPDot11MacAddr The MAC Address of the Rogue AP.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.14179.2.1.16.1.1
bsnRogueClientDot11MacAddr MAC Address of the Rogue Client.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.14179.2.1.16.1.20

QOS Profiles specified in bsnDot11EssTable can be customized
in this table. This is a lookup table for auto created 
profiles

bsnDot11QosProfileEntry row .1.3.6.1.4.1.14179.2.1.17.1

An entry in bsnDot11QosProfileTable.

Indexes

No indexes recorded

Column	Syntax	OID
bsnDot11QosProfileName QOS Profile Name. This will be one of bronze,gold, platinum,silver,uranium.	OctetString	.1.3.6.1.4.1.14179.2.1.17.1.1
bsnDot11QosProfileDesc QOS Profile Description.	OctetStringr/w	.1.3.6.1.4.1.14179.2.1.17.1.2
bsnDot11QosAverageDataRate This is one of the per user bandwidth contracts(k). Specifies Average Data Rate per user. Value of 0 indicates the feature is disabled.	Integer32r/w	.1.3.6.1.4.1.14179.2.1.17.1.3
bsnDot11QosBurstDataRate This is one of the per user bandwidth contracts(k). Specifies Average Burst Data Rate per user. Value of 0 indicates the feature is disabled.	Integer32r/w	.1.3.6.1.4.1.14179.2.1.17.1.4
bsnDot11QosAvgRealTimeDataRate This is one of the per user bandwidth contracts(k). Specifies Average Real Time Data Rate per user. Value of 0 indicates the feature is disabled.	Integer32r/w	.1.3.6.1.4.1.14179.2.1.17.1.5
bsnDot11QosBurstRealTimeDataRate This is one of the per user bandwidth contracts(k). Specifies Burst Real Time Data Rate per user. Value of 0 indicates the feature is disabled.	Integer32r/w	.1.3.6.1.4.1.14179.2.1.17.1.6
bsnDot11QosMaxRFUsagePerAP This is one of the over the Air QOS parameter. Specifies maximum RF Usage per AP in percentage.	Integer32r/w	.1.3.6.1.4.1.14179.2.1.17.1.7
bsnDot11QosProfileQueueDepth This is one of the over the Air QOS parameter. Specifies Queue depth for the current profile.	Integer32r/w	.1.3.6.1.4.1.14179.2.1.17.1.8
bsnDot11WiredQosProtocol This is one of the over the Air QOS parameter. Specifies Queue depth for the current profile.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.17.1.9
bsnDot11802Dot1PTag Specifies the type of wired QOS protocol for the current profile. Value of 0 indicates the feature is disabled.	Integer32r/w	.1.3.6.1.4.1.14179.2.1.17.1.10
bsnDot11ResetProfileToDefault Set this attribute to reset to restore the factory default value for the profile.	Enumerationr/w	.1.3.6.1.4.1.14179.2.1.17.1.40

RF ID Tag Table indexed by bsnTagDot11MacAddress.

bsnTagEntry row .1.3.6.1.4.1.14179.2.1.18.1

An entry in bsnTagTable.

Indexes

No indexes recorded

Column	Syntax	OID
bsnTagDot11MacAddress 802.11 MAC Address of the RF ID Tag.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.14179.2.1.18.1.1
bsnTagType Type of the RF ID Tag.	Enumeration	.1.3.6.1.4.1.14179.2.1.18.1.2
bsnTagTimeInterval Time Interval after which the tag transmits data.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.1.18.1.3
bsnTagBatteryStatus Battery Status of the RF ID Tag.	Enumeration	.1.3.6.1.4.1.14179.2.1.18.1.4
bsnTagLastReported No of seconds ago when this tag was heard by any AP.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.1.18.1.23

RF ID Tag Detecting AP Table indexed by bsnTagDot11MacAddress,
bsnTagRssiDataApMacAddress and bsnTagRssiDataApIfSlotId.

bsnTagRssiDataEntry row .1.3.6.1.4.1.14179.2.1.19.1

An entry in bsnTagRssiDataTable.

Indexes

No indexes recorded

Column	Syntax	OID
bsnTagRssiDataApMacAddress 802.11 MAC Address of the AP detecting the RF ID Tag.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.14179.2.1.19.1.1
bsnTagRssiDataApIfSlotId Slot Id of the radio on AP detecting the RF ID Tag.	Unsigned32	.1.3.6.1.4.1.14179.2.1.19.1.2
bsnTagRssiDataApIfType Interface Type of the radio on AP detecting the RF ID Tag.	Enumeration	.1.3.6.1.4.1.14179.2.1.19.1.3
bsnTagRssiDataApName Name of the AP detecting the RF ID Tag.	OctetString	.1.3.6.1.4.1.14179.2.1.19.1.4
bsnTagRssiDataLastHeard No of seconds ago when this tag was heard by this detecting AP.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.1.19.1.5
bsnTagRssiData RSSI of the RF ID Tag as seen by the radio on this detecting AP.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.1.19.1.6
bsnTagRssiDataSnr SNR of the RF ID tag as seen by the radio on this detecting AP.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.1.19.1.26

RF ID Tag Statistics Table.

bsnTagStatsEntry row .1.3.6.1.4.1.14179.2.1.20.1

An entry in bsnTagStatsTable.

Indexes

No indexes recorded

Column	Syntax	OID
bsnTagBytesReceived Bytes received from an RF ID Tag	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.1.20.1.1
bsnTagPacketsReceived Packets received from an RF ID Tag	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.1.20.1.20

This table was supported only by indoor mesh
AP -cisco 1000. As this AP is not supported
after 4.2.x.x. This table has been marked obsolete.
Mobile Station Extended Statistics Table.
(Mobile Station is better referred to as Client in the 
 current releases.)

bsnMobileStationExtStatsEntry row .1.3.6.1.4.1.14179.2.1.21.1

An entry in bsnMobileStationExtStatsTable.

Indexes

No indexes recorded

Column	Syntax	OID
bsnMobileStationSampleTimeobsolete Time stats were sampled as seconds since the epoch.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.1.21.1.1
bsnMobileStationTxExcessiveRetriesobsolete Tx packets dropped due to excessive retries.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.14179.2.1.21.1.2
bsnMobileStationTxRetriesobsolete Tx packets retransmitted.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.14179.2.1.21.1.3
bsnMobileStationTxFilteredobsolete Tx packets dropped by the built-in Tx filter	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.14179.2.1.21.1.20

Table of Airespace APs managed by this Airespace Switch.

bsnAPEntry row .1.3.6.1.4.1.14179.2.2.1.1

An entry in the bsnAPTable.

Indexes

No indexes recorded

Column	Syntax	OID
bsnAPDot3MacAddress The MAC address of an AP.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.14179.2.2.1.1.1
bsnAPNumOfSlots Number of Radio Interfaces on the Airespace AP. Currently maximum two interfaces are supported. One would be of type 802.11a and other of type 802.11b/g.	Integer32	.1.3.6.1.4.1.14179.2.2.1.1.2
bsnAPName Name assigned to this AP. If an AP is not configured its factory default name will be ap:<last three byte of MACAddress> eg. ap:af:12:be	OctetStringr/w	.1.3.6.1.4.1.14179.2.2.1.1.3
bsnAPLocation User specified location of this AP. While configuring AP, user should specify a location for the AP so that its easy to figure out for some one where the AP is located.	OctetStringr/w	.1.3.6.1.4.1.14179.2.2.1.1.4
bsnAPMonitorOnlyMode Monitor Only Mode Setting.	Enumerationr/w	.1.3.6.1.4.1.14179.2.2.1.1.5
bsnAPOperationStatus Operation State of the AP. When AP associates with the Airespace Switch its state will be associated. When Airespace AP is disassociated from the Switch, its state will be disassociating. The state is downloading when …	Enumeration	.1.3.6.1.4.1.14179.2.2.1.1.6
bsnAPSoftwareVersion Major Minor Software Version of AP	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.14179.2.2.1.1.8
bsnAPBootVersion Major Minor Boot Version of AP	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.14179.2.2.1.1.9
bsnAPPrimaryMwarName sysName of the Airespace Switch which is suppose to be the Primary MWAR(switch) of the AP with which AP should associate. This work when AP is not directly connected to Airespace Switch, it tries to find Primary Switch …	OctetStringr/w	.1.3.6.1.4.1.14179.2.2.1.1.10
bsnAPReset Set this attribute to reset the AP. When it comes up it will try to associate with the Primary Switch if that is set, else it will associate with the Master Switch. Reading this attribute will always return 0	Enumerationr/w	.1.3.6.1.4.1.14179.2.2.1.1.11
bsnAPStatsTimer Configures the time interval in secs after which bsnAPDot11Counters Stats is sent from AP to Switch. If not configured this value is 0 which means never send the stats.	Integer32r/w	.1.3.6.1.4.1.14179.2.2.1.1.12
bsnAPPortNumberdeprecated Port on the Switch on which this APs traffic is coming through.	Integer32	.1.3.6.1.4.1.14179.2.2.1.1.13
bsnAPModel AP Model	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.14179.2.2.1.1.16
bsnAPSerialNumber AP Serial Number.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.14179.2.2.1.1.17
bsnAPClearConfig Set this attribute to clear AP configuration and reset it to factory defaults. Reading this attribute will always return 0	Enumerationr/w	.1.3.6.1.4.1.14179.2.2.1.1.18
bsnApIpAddress IP address of the AP. This will not be available when the switch is operating in the Layer2 mode. In this case, the attribute will return 0 as value.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.2.2.1.1.19
bsnAPMirrorMode If enabled, then this AP's Client's Data is mirrored and this AP's clients are dynamically added to the switch's mirrored MAC list.	Enumerationr/w	.1.3.6.1.4.1.14179.2.2.1.1.20
bsnAPRemoteModeSupport This specifies if the the Remote Mode is supported on this AP or not. If supported user can set bsnAPMonitorOnlyMode to remote. Otherwise not.	Enumeration	.1.3.6.1.4.1.14179.2.2.1.1.21
bsnAPType This is the model of the AP in enumeration. Ap models start with wap are called panda ap models.Ap models ended with different suffix have different functionalities. i : Ap with internal antenna e …	Enumeration	.1.3.6.1.4.1.14179.2.2.1.1.22
bsnAPSecondaryMwarName sysName of the Airespace Switch which is suppose to be the Secondary MWAR(switch) of the AP with which AP should associate if Primary Switch(configured through bsnAPPrimaryMwarName) is not available. If primary and se…	OctetStringr/w	.1.3.6.1.4.1.14179.2.2.1.1.23
bsnAPTertiaryMwarName sysName of the Airespace Switch which is suppose to be the Tertiary MWAR(switch) of the AP with which AP should associate. If primary,secondary and tertiary switch are not available then it will associate with Master S…	OctetStringr/w	.1.3.6.1.4.1.14179.2.2.1.1.24
bsnAPIsStaticIP This flag when disabled implies that AP will use DHCP to get the IP address. However, if it is enabled, then user should enter the IPAddress, Netmask and Gateway.	Enumerationr/w	.1.3.6.1.4.1.14179.2.2.1.1.25
bsnAPNetmask The Netmask of the IP address of the AP.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.2.2.1.1.26
bsnAPGateway The Gateway for the AP.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.2.2.1.1.27
bsnAPStaticIPAddress The Static IP-Address configuration for the AP. This can only be changed when the LWAPP mode is in Layer-3.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.2.2.1.1.28
bsnAPBridgingSupport This specifies if this AP is a Bridging AP. Bridging APs can be used in Bridging or Mesh network configurations.	Enumerationr/w	.1.3.6.1.4.1.14179.2.2.1.1.29
bsnAPGroupVlanName The AP Group to which this AP has been associated with. If it is empty, then no AP Group overriding has been set.	OctetStringr/w	.1.3.6.1.4.1.14179.2.2.1.1.30
bsnAPIOSVersion IOS Version of IOS Cisco AP. Zero length string will be returned for other APs	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.14179.2.2.1.1.31
bsnAPCertificateType Enum values denoting AP Certificate Type. 1 : manufactureinstalled : Manufacture Installed Certificate type (MIC). 2 : selfsigned : Self Signed Certificate type (SSC). 3 : localsignificance : Local Significance.	Enumeration	.1.3.6.1.4.1.14179.2.2.1.1.32
bsnAPEthernetMacAddress The Ethernet MAC address of the AP.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.14179.2.2.1.1.33
bsnAPAdminStatusdeprecated Admin State of the AP	Enumerationr/w	.1.3.6.1.4.1.14179.2.2.1.1.37

Each entry represents an 802.11 interface in an Airespace
AP.

bsnAPIfEntry row .1.3.6.1.4.1.14179.2.2.2.1

An entry in bsnAPIfTable.

Indexes

No indexes recorded

Column	Syntax	OID
bsnAPIfSlotId The slotId of this interface.	Unsigned32	.1.3.6.1.4.1.14179.2.2.2.1.1
bsnAPIfType The type of this interface. dot11b also implies 802.11b/g.	Enumeration	.1.3.6.1.4.1.14179.2.2.2.1.2
bsnAPIfPhyChannelAssignment If this value is true, then bsnAPDot11CurrentChannel in bsnAPIfDot11PhyDSSSTable is assigned by dynamic algorithm and is read-only.	Enumerationr/w	.1.3.6.1.4.1.14179.2.2.2.1.3
bsnAPIfPhyChannelNumber Current channel number of the AP Interface. Channel numbers will be from 1 to 14 for 802.11b interface type. Channel numbers will be from 34 to 169 for 802.11a interface type. Allowed channel numbers also depends on t…	Enumerationr/w	.1.3.6.1.4.1.14179.2.2.2.1.4
bsnAPIfPhyTxPowerControl If this value is true, then bsnAPIfPhyTxPowerLevel is assigned by dynamic algorithm and is read-only.	Enumerationr/w	.1.3.6.1.4.1.14179.2.2.2.1.5
bsnAPIfPhyTxPowerLevel The TxPowerLevel currently being used to transmit data. Some PHYs also use this value to determine the receiver sensitivity requirements for CCA. Valid values are between 1 to 8,depnding on what radio, and this attribut…	Integer32r/w	.1.3.6.1.4.1.14179.2.2.2.1.6
bsnAPIfPhyAntennaMode Antenna Mode of the AP Interface. For 802.11a this attribute will always be omni for now. This attribute doesn't apply to interface of type 802.11b.	Enumerationr/w	.1.3.6.1.4.1.14179.2.2.2.1.7
bsnAPIfPhyAntennaType This attribute specified if the Antenna currently used by AP Radio is internal or external. For 802.11a the antenna is always internal. For 802.11b you can set antenna type to be external or internal.	Enumerationr/w	.1.3.6.1.4.1.14179.2.2.2.1.8
bsnAPIfPhyAntennaDiversity Diversity doesn't apply to AP Radio of type 802.11a. For 802.11b you can set it to connectorA, connectorB or enabled.	Enumerationr/w	.1.3.6.1.4.1.14179.2.2.2.1.9
bsnAPIfCellSiteConfigId In a cell site configuration, this would be the cell Id of this AP Interface	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.2.2.1.10
bsnAPIfNumberOfVaps Number of WLANs currently active on this AP Interface.	Integer32	.1.3.6.1.4.1.14179.2.2.2.1.11
bsnAPIfOperStatus Operational status of the interface.	Enumeration	.1.3.6.1.4.1.14179.2.2.2.1.12
bsnAPIfPortNumber Port number on Airespace Switch on which the traffic from this AP interface is received.	Integer32	.1.3.6.1.4.1.14179.2.2.2.1.13
bsnAPIfPhyAntennaOptions This attribute specifies the Antenna types supported by the AP Radio whether it is internal or external or both. internalAndExternal(0)- internal and external antenna for both 11a and 11b internal(1) - only internal a…	Enumeration	.1.3.6.1.4.1.14179.2.2.2.1.14
bsnApIfNoOfUsers No of Users associated with this radio.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.2.2.1.15
bsnAPIfWlanOverride This flag when disabled implies that all WLANs are available from this radio. However, if this is enabled, then only those WLANs that appear in the bsnApIfWlanOverrideTable will be available from this radio.	Enumerationr/w	.1.3.6.1.4.1.14179.2.2.2.1.16
bsnAPIfPacketsSniffingFeature This flag when enabled implies that AP will sniff the 802.11a/bg packets. However, if it is enabled, then user should enter the server-ip-address on which Airopeek is running and the 802.11a/bg-channel-number to be …	Enumerationr/w	.1.3.6.1.4.1.14179.2.2.2.1.17
bsnAPIfSniffChannel This the 802.11a/bg-channel-number on which AP will sniff the packets.	Enumerationr/w	.1.3.6.1.4.1.14179.2.2.2.1.18
bsnAPIfSniffServerIPAddress The machine ip address on which Airopeek application is running.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.2.2.2.1.19
bsnAPIfAntennaGain Represents antenna gain in multiple of 0.5 dBm. An integer value 4 means 4 x 0.5 = 2 dBm of gain	Integer32r/w	.1.3.6.1.4.1.14179.2.2.2.1.20
bsnAPIfChannelList List of comma separated channels supported by this radio.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.14179.2.2.2.1.21
bsnAPIfAbsolutePowerList List of comma separated absolute power levels supported by this radio.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.14179.2.2.2.1.22
bsnAPIfRegulatoryDomainSupport If the regulatory domain on radio is supported or notSupported on the controller	Enumeration	.1.3.6.1.4.1.14179.2.2.2.1.23
bsnAPIfPhyS80EightyChannelNumberdeprecated Secondary 80MHz channel number of the AP Interface. Allowed channel numbers also depends on the current Country Code set in the Switch.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.2.2.1.28
bsnAPIfAdminStatusdeprecated Admin status of the interface.	Enumerationr/w	.1.3.6.1.4.1.14179.2.2.2.1.34

Each entry represents SMT parameters on an 802.11 interface
of an Airespace AP.

bsnAPIfSmtParamEntry row .1.3.6.1.4.1.14179.2.2.3.1

An entry in bsnAPIfSmtParamTable

Indexes

No indexes recorded

Column	Syntax	OID
bsnAPIfDot11BeaconPeriod This attribute shall specify the number of TU that a AP Interface shall use for scheduling Beacon tranmissions. This value is transmitted in Beacon and Probe Response frames.	Integer32	.1.3.6.1.4.1.14179.2.2.3.1.1
bsnAPIfDot11MediumOccupancyLimit This attribute shall indicate the maximum amount of time, in TU, that a point coordinator may control the usage of the wireless medium without relinquishing control for long enough to allow at least one instance of DCF …	Integer32	.1.3.6.1.4.1.14179.2.2.3.1.2
bsnAPIfDot11CFPPeriod The attribute shall describe the number of DTIM intervals between the start of CFPs. It is modified by MLME-START.request primitive.	Integer32	.1.3.6.1.4.1.14179.2.2.3.1.3
bsnAPIfDot11CFPMaxDuration The attribute shall describe the maximum duration of the CFP in TU that may be generated by the PCF. It is modified by MLME-START.request primitive.	Integer32	.1.3.6.1.4.1.14179.2.2.3.1.4
bsnAPIfDot11OperationalRateSet This attribute shall specify the set of data rates at which the AP Interface may transmit data. Each octet contains a value representing a rate. Each rate shall be within the range from 2 to 127, corresponding to data…	OctetString	.1.3.6.1.4.1.14179.2.2.3.1.5
bsnAPIfDot11DTIMPeriod This attribute shall specify the number of beacon intervals that shall elapse between transmission of Beacons frames containing a TIM element whose DTIM Count field is 0. This value is transmitted in the DTIM Period fie…	Integer32	.1.3.6.1.4.1.14179.2.2.3.1.6
bsnAPIfDot11MultiDomainCapabilityImplemented This attribute, when TRUE, indicates that the AP Interface implementation is capable of supporting multiple regulatory domains. The capability is disabled, otherwise. The default value of this attribute is FALSE.	Enumeration	.1.3.6.1.4.1.14179.2.2.3.1.7
bsnAPIfDot11MultiDomainCapabilityEnabled This attribute, when TRUE, indicates that the capability of the AP Interface to operate in multiple regulatory domains is enabled. The capability is disabled, otherwise. The default value of this attribute is FALSE.	Enumeration	.1.3.6.1.4.1.14179.2.2.3.1.8
bsnAPIfDot11CountryString This attribute identifies the country in which the AP Interface is operating. The first two octets of this string is the two character country code as described in document ISO/IEC 3166-1. The third octet shall be on…	OctetString	.1.3.6.1.4.1.14179.2.2.3.1.9
bsnAPIfDot11SmtParamsConfigType This attribute suggests if the Station parameters for this radio are automatically set or have been customized.	Enumeration	.1.3.6.1.4.1.14179.2.2.3.1.10
bsnAPIfDot11BSSID BSSID of this AP config which would be the MAC Address of AP	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.14179.2.2.3.1.30

Each entry represents an 803.2 or an 802.11 interface in an
Airespace AP.

bsnAPIfMultiDomainCapabilityEntry row .1.3.6.1.4.1.14179.2.2.4.1

Each entry represents an 803.2 or an 802.11 interface in an
Airespace AP.

Indexes

No indexes recorded

Column	Syntax	OID
bsnAPIfDot11MaximumTransmitPowerLevel This attribute shall indicate the maximum transmit power, in dBm, allowed in the subband for the associated domain country string. The default value of this attribute shall be zero.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.2.4.1.1
bsnAPIfDot11FirstChannelNumber This attribute shall indicate the value of the lowest channel number in the subband for the associated domain country string. The default value of this attribute shall be zero.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.2.4.1.2
bsnAPIfDot11NumberofChannels This attribute shall indicate the value of the total number of channels allowed in the subband for the associated domain country string. The default value of this attribute shall be zero.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.2.4.1.20

Group contains MAC attributes pertaining to the operation
of the MAC. These would be read only attributes as they 
would be updated by RRM Dynamic Algorithm. If user needs 
to configure them then they can only be configured 
globally

bsnAPIfMacOperationParamEntry row .1.3.6.1.4.1.14179.2.2.5.1

An entry in the bsnAPIfMacOperationParamEntry Table.
Interface tables in this MIB module are indexed
by bsnAPDot3MacAddress, bsnAPIfSlotId.

Indexes

No indexes recorded

Column	Syntax	OID
bsnAPIfDot11MacRTSThreshold If bsnAPIfMacParamsAutomaticOn is true then this is read only parameter updated by RRM dynamic algorithm	Integer32	.1.3.6.1.4.1.14179.2.2.5.1.1
bsnAPIfDot11MacShortRetryLimit If bsnAPIfMacParamsAutomaticOn is true then this is read only parameter updated by RRM dynamic algorithm	Integer32	.1.3.6.1.4.1.14179.2.2.5.1.2
bsnAPIfDot11MacLongRetryLimit If bsnAPIfMacParamsAutomaticOn is true then this is read only parameter updated by RRM dynamic algorithm	Integer32	.1.3.6.1.4.1.14179.2.2.5.1.3
bsnAPIfDot11MacFragmentationThreshold If bsnAPIfMacParamsAutomaticOn is true then this is read only parameter updated by RRM dynamic algorithm	Integer32	.1.3.6.1.4.1.14179.2.2.5.1.4
bsnAPIfDot11MacMaxTransmitMSDULifetime If bsnAPIfMacParamsAutomaticOn is true then this is read only parameter updated by RRM dynamic algorithm	Unsigned32	.1.3.6.1.4.1.14179.2.2.5.1.5
bsnAPIfDot11MacParamsConfigType This attribute suggests if the MAC parameters for this radio are automatically set or have been customized.	Enumeration	.1.3.6.1.4.1.14179.2.2.5.1.6
bsnAPIfDot11MacMaxReceiveLifetime If bsnAPIfMacParamsAutomaticOn is true then this is read only parameter updated by RRM dynamic algorithm	Unsigned32	.1.3.6.1.4.1.14179.2.2.5.1.25

Group containing attributes that are MAC counters.
Each instance represents counters on a AP dot11 interface

bsnAPIfDot11CountersEntry row .1.3.6.1.4.1.14179.2.2.6.1

An entry in the dot11CountersEntry Table.
Interface tables in this MIB module are indexed
by bsnAPDot3MacAddress and bsnAPIfSlotId

Indexes

No indexes recorded

Column	Syntax	OID
bsnAPIfDot11TransmittedFragmentCount This counter shall be incremented for an acknowledged MPDU with an individual address in the address 1 field or an MPDU with a multicast address in the address 1 field of type Data or Management.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.2.6.1.1
bsnAPIfDot11MulticastTransmittedFrameCount This counter shall increment only when the multicast bit is set in the destination MAC address of a successfully transmitted MSDU. When operating as a STA in an ESS, where these frames are directed to the AP, this impl…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.2.6.1.2
bsnAPIfDot11RetryCount This counter shall increment when an MSDU is successfully transmitted after one or more retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.2.6.1.3
bsnAPIfDot11MultipleRetryCount This counter shall increment when an MSDU is successfully transmitted after more than one retransmission.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.2.6.1.4
bsnAPIfDot11FrameDuplicateCount This counter shall increment when a frame is received that the Sequence Control field indicates is a duplicate.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.2.6.1.5
bsnAPIfDot11RTSSuccessCount This counter shall increment when a CTS is received in response to an RTS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.2.6.1.6
bsnAPIfDot11RTSFailureCount This counter shall increment when a CTS is not received in response to an RTS.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.2.6.1.7
bsnAPIfDot11ACKFailureCount This counter shall increment when an ACK is not received when expected.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.2.6.1.8
bsnAPIfDot11ReceivedFragmentCount This counter shall be incremented for each successfully received MPDU of type Data or Management.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.2.6.1.9
bsnAPIfDot11MulticastReceivedFrameCount This counter shall increment when a MSDU is received with the multicast bit set in the destination MAC address.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.2.6.1.10
bsnAPIfDot11FCSErrorCount This counter shall increment when an FCS error is detected in a received MPDU.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.2.6.1.11
bsnAPIfDot11TransmittedFrameCount This counter shall increment for each successfully transmitted MSDU.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.2.6.1.12
bsnAPIfDot11WEPUndecryptableCount This counter shall increment when a frame is received with the WEP subfield of the Frame Control field set to one and the WEPOn value for the key mapped to the TA's MAC address indicates that the frame should not have b…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.2.6.1.13
bsnAPIfDot11FailedCount This counter shall increment when an MSDU is not transmitted successfully due to the number of transmit attempts exceeding either the bsnAPIfDot11ShortRetryLimit or dot11LongRetryLimit.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.2.2.6.1.33

Entry of attributes for bsnAPIfDot11PhyChannelEntry.
Implemented as a table indexed on bsnAPDot3MacAddress,
bsnAPIfSlotId allow for multiple instances on an Agent

bsnAPIfDot11PhyChannelEntry row .1.3.6.1.4.1.14179.2.2.9.1

An entry in the bsnAPIfDot11PhyChannelEntry Table.
Interface tables in this MIB module are indexed
by bsnAPDot3MacAddress, bsnAPIfSlotId.

Indexes

No indexes recorded

Column	Syntax	OID
bsnAPIfDot11CurrentCCAModedeprecated The current CCA method in operation.Valid values are: energy detect only (edonly) = 01, carrier sense only (csonly) = 02, carrier sense and energy detect (edandcs)= 04 carrier sense with timer (cswithtimer)= 08 high rat…	Enumeration	.1.3.6.1.4.1.14179.2.2.9.1.1
bsnAPIfDot11EDThreshold The current Energy Detect Threshold being used by the Channel PHY.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.2.9.1.2
bsnAPIfDot11TIThreshold The Threshold being used to detect a busy medium (frequency). CCA shall report a busy medium upon detecting the RSSI above this threshold.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.2.9.1.23

Table of attributes for various thresholds to be
set on each Airespace AP Interface for Load 
performance profile , interference performance 
profile and Noise performance profile.

bsnAPIfProfileThresholdConfigEntry row .1.3.6.1.4.1.14179.2.2.12.1

An entry (conceptual row) in the Phy Thresholds
Table. Entries in this MIB are indexed by
bsnAPDot3MacAddress and bsnAPIfSlotId

Indexes

No indexes recorded

Column	Syntax	OID
bsnAPIfProfileParamAssignment If this value is automatic then Profile Parameters in bsnRrmDot11aAPProfile at the global level will be used. If this value is customized then Profile Parameters in bsnAPIfProfileThresholdConfig Table will be used and …	Enumerationr/w	.1.3.6.1.4.1.14179.2.2.12.1.1
bsnAPIfForeignInterferenceThreshold foreign interference threshold between 0 and 100 percent.	Integer32r/w	.1.3.6.1.4.1.14179.2.2.12.1.2
bsnAPIfForeignNoiseThreshold foreign noise threshold between -100 and -50 dBm.	Integer32r/w	.1.3.6.1.4.1.14179.2.2.12.1.3
bsnAPIfRFUtilizationThreshold RF utlization threshold between 0 and 100 percent.	Integer32r/w	.1.3.6.1.4.1.14179.2.2.12.1.4
bsnAPIfThroughputThreshold Airespace AP data-rate threshold between 1000 and 100000	Unsigned32r/w	.1.3.6.1.4.1.14179.2.2.12.1.5
bsnAPIfMobilesThreshold Airespace AP mobiles threshold between 1 and 75	Integer32r/w	.1.3.6.1.4.1.14179.2.2.12.1.6
bsnAPIfCoverageThreshold Airespace AP coverage threshold between 3 and 50	Integer32r/w	.1.3.6.1.4.1.14179.2.2.12.1.7
bsnAPIfMobileMinExceptionLevel Airespace AP mobile minimum exception level between 1 and 1000	Integer32r/w	.1.3.6.1.4.1.14179.2.2.12.1.8
bsnAPIfCoverageExceptionLevel Airespace AP coverage exception level between 0 and 100 percent.	Integer32r/w	.1.3.6.1.4.1.14179.2.2.12.1.28

These are RRM performance related read only parameters
per Airespace AP

bsnAPIfLoadParametersEntry row .1.3.6.1.4.1.14179.2.2.13.1

An entry (conceptual row) in the Table.
Entries in this MIB are indexed by
bsnAPDot3MacAddress and bsnAPIfSlotId

Indexes

No indexes recorded

Column	Syntax	OID
bsnAPIfLoadRxUtilization This is the percentage of time the Airespace AP receiver is busy operating on packets. It is a number from 0-100 representing a load from 0 to 1.	Integer32	.1.3.6.1.4.1.14179.2.2.13.1.1
bsnAPIfLoadTxUtilization This is the percentage of time the Airespace AP transmitter is busy operating on packets. It is a number from 0-100 representing a load from 0 to 1.	Integer32	.1.3.6.1.4.1.14179.2.2.13.1.2
bsnAPIfLoadChannelUtilization Channel Utilization	Integer32	.1.3.6.1.4.1.14179.2.2.13.1.3
bsnAPIfLoadNumOfClients This is the number of clients attached to this Airespace AP at the last measurement interval(This comes from APF)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.2.13.1.4
bsnAPIfPoorSNRClients This is the number of clients with poor SNR attached to this Airespace AP at the last measurement interval ( This comes from APF ).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.2.13.1.24

This is a table of channel information like interference
and noise from other 802.11 networks on each channel.

bsnAPIfChannelInterferenceInfoEntry row .1.3.6.1.4.1.14179.2.2.14.1

An entry (conceptual row) in the Table.
Entries in this MIB are indexed by
bsnAPDot3MacAddress, bsnAPIfSlotId

Indexes

No indexes recorded

Column	Syntax	OID
bsnAPIfInterferenceChannelNo Channel Number on AP	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.2.14.1.1
bsnAPIfInterferencePower Power of Interference from other 802.11 networks on this channel	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.2.2.14.1.2
bsnAPIfInterferenceUtilization Interference from other 802.11 networks on this channel	Integer32	.1.3.6.1.4.1.14179.2.2.14.1.22