bsnCustomSignatureEnable

AIRESPACE-WIRELESS-MIB · .1.3.6.1.4.1.14179.2.3.1.42.3.1.11
MIB view Table view

Object

column r/w SNMPv2-TCTruthValue 
This object configures the status of a particular
Custom signature on LWAPP APs, for use in performing
signature analysis on the received 802.11 data and/or
management frames.
              
A value of 'true' makes the Controller send the
'Signature Add LWAPP Message' to all the joined APs
with the status field set to 'enable'.  This makes
the joined APs perform signature analysis on the
received 802.11 data and/or management frames and
report the discrepancies observed, if any, to the
Controller.
              
A value of 'false' makes the Controller send the
'Signature Add LWAPP Message' to all the joined APs
with the status field set to 'disable'.  The joined
APs doesn't perform the signature analysis on the
received 802.11 data and/or management frames for
this particular signature, till the signature is
enabled.

Context

MIB
AIRESPACE-WIRELESS-MIB
OID
.1.3.6.1.4.1.14179.2.3.1.42.3.1.11
Type
column
Access
readwrite
Status
current
Parent
bsnCustomSignatureEntry
Table
bsnCustomSignatureTable
Siblings
14

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
bsnCustomSignaturePrecedence
Precedence of the signature. This specifies the order in which the signature is applied to a packet.
columnUnsigned32.1.3.6.1.4.1.14179.2.3.1.42.3.1.1
bsnCustomSignatureConfigType
This attribute specifies the type of Signature configuration. It's protocol when the protocol format is used in the UI to configure this. Pattern is the config type for all signa…
columnEnumeration.1.3.6.1.4.1.14179.2.3.1.42.3.1.10
bsnCustomSignatureMacInfo
This object defines the pattern followed by the LWAPP APs to perform signature analysis with this Custom signature and report the results to the Controller.
columnBsnTxtSignatureMacInfo.1.3.6.1.4.1.14179.2.3.1.42.3.1.12
bsnCustomSignatureMacFreq
This object specifies the frequency of matching packets from a particular source after which the specified action is taken.
columnUnsigned32.1.3.6.1.4.1.14179.2.3.1.42.3.1.13
bsnCustomSignatureName
This attribute is used to configure the name on a signature.
columnOctetString.1.3.6.1.4.1.14179.2.3.1.42.3.1.2
bsnCustomSignatureRowStatus
Row Status for creation/deletion. Signature will allowed to be created, deleted and edited in later releases.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.14179.2.3.1.42.3.1.20
bsnCustomSignatureInterval
Interval of the signature. This specifies the interval when the signature is applied to a packet.
columnUnsigned32.1.3.6.1.4.1.14179.2.3.1.42.3.1.21
bsnCustomSignatureDescription
This attribute is used to configure the description of a signature.
columnOctetString.1.3.6.1.4.1.14179.2.3.1.42.3.1.3
bsnCustomSignatureFrameType
This attribute specifies the type of frame that needs to match a signature.
columnEnumeration.1.3.6.1.4.1.14179.2.3.1.42.3.1.4
bsnCustomSignatureAction
This attribute specifies the action to be taken once a packet is found to match a signature.
columnEnumeration.1.3.6.1.4.1.14179.2.3.1.42.3.1.5
bsnCustomSignatureState
This attribute specifies the state of a signature. It is used to match packets only if the state is enabled.
columnEnumeration.1.3.6.1.4.1.14179.2.3.1.42.3.1.6
bsnCustomSignatureFrequency
This specifies the frequency of the matching packets after which the specified action is taken.
columnUnsigned32.1.3.6.1.4.1.14179.2.3.1.42.3.1.7
bsnCustomSignatureQuietTime
This specifies the quiet time in seconds during which no matching packets are found after which the attack is considered stopped.
columnUnsigned32.1.3.6.1.4.1.14179.2.3.1.42.3.1.8
bsnCustomSignatureVersion
This specifies the signature version.
columnUnsigned32.1.3.6.1.4.1.14179.2.3.1.42.3.1.9