bsnAPIfPhyTxPowerControl
AIRESPACE-WIRELESS-MIB ·
.1.3.6.1.4.1.14179.2.2.2.1.5
Object
column
r/w
Enumeration
If this value is true, then bsnAPIfPhyTxPowerLevel is assigned by dynamic algorithm and is read-only.
Context
- MIB
- AIRESPACE-WIRELESS-MIB
- OID
.1.3.6.1.4.1.14179.2.2.2.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- bsnAPIfEntry
- Table
- bsnAPIfTable
- Siblings
- 24
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bsnAPIfSlotId The slotId of this interface. | column | Unsigned32 | .1.3.6.1.4.1.14179.2.2.2.1.1 |
| bsnAPIfCellSiteConfigId In a cell site configuration, this would be the cell Id of
this AP Interface | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.14179.2.2.2.1.10 |
| bsnAPIfNumberOfVaps Number of WLANs currently active on this AP Interface. | column | Integer32 | .1.3.6.1.4.1.14179.2.2.2.1.11 |
| bsnAPIfOperStatus Operational status of the interface. | column | Enumeration | .1.3.6.1.4.1.14179.2.2.2.1.12 |
| bsnAPIfPortNumber Port number on Airespace Switch on which the traffic from this AP
interface is received. | column | Integer32 | .1.3.6.1.4.1.14179.2.2.2.1.13 |
| bsnAPIfPhyAntennaOptions This attribute specifies the Antenna types supported by the AP
Radio whether it is internal or external or both.
internalAndExternal(0)- internal and external antenna for both
1… | column | Enumeration | .1.3.6.1.4.1.14179.2.2.2.1.14 |
| bsnApIfNoOfUsers No of Users associated with this radio. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.14179.2.2.2.1.15 |
| bsnAPIfWlanOverride This flag when disabled implies that all WLANs are available
from this radio.
However, if this is enabled, then only those WLANs that appear
in the bsnApIfWlanOverrideTable will b… | column | Enumeration | .1.3.6.1.4.1.14179.2.2.2.1.16 |
| bsnAPIfPacketsSniffingFeature This flag when enabled implies that AP will sniff the 802.11a/bg
packets. However, if it is enabled, then user should enter the
server-ip-address on which Airopeek is running a… | column | Enumeration | .1.3.6.1.4.1.14179.2.2.2.1.17 |
| bsnAPIfSniffChannel This the 802.11a/bg-channel-number on which AP will sniff
the packets. | column | Enumeration | .1.3.6.1.4.1.14179.2.2.2.1.18 |
| bsnAPIfSniffServerIPAddress The machine ip address on which Airopeek application is running. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14179.2.2.2.1.19 |
| bsnAPIfType The type of this interface. dot11b also implies 802.11b/g. | column | Enumeration | .1.3.6.1.4.1.14179.2.2.2.1.2 |
| bsnAPIfAntennaGain Represents antenna gain in multiple of 0.5 dBm. An integer
value 4 means 4 x 0.5 = 2 dBm of gain | column | Integer32 | .1.3.6.1.4.1.14179.2.2.2.1.20 |
| bsnAPIfChannelList List of comma separated channels supported by this radio. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.14179.2.2.2.1.21 |
| bsnAPIfAbsolutePowerList List of comma separated absolute power levels supported by this
radio. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.14179.2.2.2.1.22 |
| bsnAPIfRegulatoryDomainSupport If the regulatory domain on radio is supported or notSupported
on the controller | column | Enumeration | .1.3.6.1.4.1.14179.2.2.2.1.23 |
| bsnAPIfPhyS80EightyChannelNumber deprecated Secondary 80MHz channel number of the AP Interface.
Allowed channel numbers also depends on the current
Country Code set in the Switch. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14179.2.2.2.1.28 |
| bsnAPIfPhyChannelAssignment If this value is true, then bsnAPDot11CurrentChannel in
bsnAPIfDot11PhyDSSSTable is assigned by dynamic
algorithm and is read-only. | column | Enumeration | .1.3.6.1.4.1.14179.2.2.2.1.3 |
| bsnAPIfAdminStatus deprecated Admin status of the interface. | column | Enumeration | .1.3.6.1.4.1.14179.2.2.2.1.34 |
| bsnAPIfPhyChannelNumber Current channel number of the AP Interface.
Channel numbers will be from 1 to 14 for 802.11b interface type.
Channel numbers will be from 34 to 169 for 802.11a interface
type. A… | column | Enumeration | .1.3.6.1.4.1.14179.2.2.2.1.4 |
| bsnAPIfPhyTxPowerLevel The TxPowerLevel currently being used to transmit data.
Some PHYs also use this value to determine the receiver
sensitivity requirements for CCA. Valid values are between
1 to 8,d… | column | Integer32 | .1.3.6.1.4.1.14179.2.2.2.1.6 |
| bsnAPIfPhyAntennaMode Antenna Mode of the AP Interface.
For 802.11a this attribute will always be omni for now.
This attribute doesn't apply to interface of type 802.11b. | column | Enumeration | .1.3.6.1.4.1.14179.2.2.2.1.7 |
| bsnAPIfPhyAntennaType This attribute specified if the Antenna currently used by AP
Radio is internal or external. For 802.11a the antenna is always
internal. For 802.11b you can set antenna type to be… | column | Enumeration | .1.3.6.1.4.1.14179.2.2.2.1.8 |
| bsnAPIfPhyAntennaDiversity Diversity doesn't apply to AP Radio of type 802.11a.
For 802.11b you can set it to connectorA, connectorB or enabled. | column | Enumeration | .1.3.6.1.4.1.14179.2.2.2.1.9 |