bsnAPPortNumber
AIRESPACE-WIRELESS-MIB ·
.1.3.6.1.4.1.14179.2.2.1.1.13
Object
column
deprecated
Integer32
Port on the Switch on which this APs traffic is coming through.
Context
- MIB
- AIRESPACE-WIRELESS-MIB
- OID
.1.3.6.1.4.1.14179.2.2.1.1.13- Type
- column
- Access
- readonly
- Status
- deprecated
- Parent
- bsnAPEntry
- Table
- bsnAPTable
- Siblings
- 30
Syntax
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bsnAPDot3MacAddress The MAC address of an AP. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.14179.2.2.1.1.1 |
| bsnAPPrimaryMwarName sysName of the Airespace Switch which is suppose to be the
Primary MWAR(switch) of the AP with which AP should associate.
This work when AP is not directly connected to Airespace … | column | OctetString | .1.3.6.1.4.1.14179.2.2.1.1.10 |
| bsnAPReset Set this attribute to reset the AP.
When it comes up it will try to associate with the
Primary Switch if that is set, else it will associate with the
Master Switch. Reading this a… | column | Enumeration | .1.3.6.1.4.1.14179.2.2.1.1.11 |
| bsnAPStatsTimer Configures the time interval in secs after which
bsnAPDot11Counters Stats is sent from AP to Switch. If not
configured this value is 0 which means never send the stats. | column | Integer32 | .1.3.6.1.4.1.14179.2.2.1.1.12 |
| bsnAPModel AP Model | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.14179.2.2.1.1.16 |
| bsnAPSerialNumber AP Serial Number. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.14179.2.2.1.1.17 |
| bsnAPClearConfig Set this attribute to clear AP configuration
and reset it to factory defaults.
Reading this attribute will always return 0 | column | Enumeration | .1.3.6.1.4.1.14179.2.2.1.1.18 |
| bsnApIpAddress IP address of the AP. This will not be available when
the switch is operating in the Layer2 mode. In this case,
the attribute will return 0 as value. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14179.2.2.1.1.19 |
| bsnAPNumOfSlots Number of Radio Interfaces on the Airespace AP.
Currently maximum two interfaces are supported.
One would be of type 802.11a and other of type
802.11b/g. | column | Integer32 | .1.3.6.1.4.1.14179.2.2.1.1.2 |
| bsnAPMirrorMode If enabled, then this AP's Client's Data is mirrored and this
AP's clients are dynamically added to the switch's mirrored
MAC list. | column | Enumeration | .1.3.6.1.4.1.14179.2.2.1.1.20 |
| bsnAPRemoteModeSupport This specifies if the the Remote Mode is supported on this
AP or not. If supported user can set bsnAPMonitorOnlyMode to
remote. Otherwise not. | column | Enumeration | .1.3.6.1.4.1.14179.2.2.1.1.21 |
| bsnAPType This is the model of the AP in enumeration.
Ap models start with wap are called panda
ap models.Ap models ended with different suffix
have different functionalities.
… | column | Enumeration | .1.3.6.1.4.1.14179.2.2.1.1.22 |
| bsnAPSecondaryMwarName sysName of the Airespace Switch which is suppose to be the
Secondary MWAR(switch) of the AP with which AP should associate
if Primary Switch(configured through bsnAPPrimaryMwarNam… | column | OctetString | .1.3.6.1.4.1.14179.2.2.1.1.23 |
| bsnAPTertiaryMwarName sysName of the Airespace Switch which is suppose to be the
Tertiary MWAR(switch) of the AP with which AP should associate.
If primary,secondary and tertiary switch are not availab… | column | OctetString | .1.3.6.1.4.1.14179.2.2.1.1.24 |
| bsnAPIsStaticIP This flag when disabled implies that AP will use DHCP to get
the IP address. However, if it is enabled, then user should
enter the IPAddress, Netmask and Gateway. | column | Enumeration | .1.3.6.1.4.1.14179.2.2.1.1.25 |
| bsnAPNetmask The Netmask of the IP address of the AP. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14179.2.2.1.1.26 |
| bsnAPGateway The Gateway for the AP. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14179.2.2.1.1.27 |
| bsnAPStaticIPAddress The Static IP-Address configuration for the AP.
This can only be changed when the LWAPP mode is in Layer-3. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14179.2.2.1.1.28 |
| bsnAPBridgingSupport This specifies if this AP is a Bridging AP. Bridging APs
can be used in Bridging or Mesh network configurations. | column | Enumeration | .1.3.6.1.4.1.14179.2.2.1.1.29 |
| bsnAPName Name assigned to this AP. If an AP is not configured its
factory default name will be ap:<last three byte of
MACAddress> eg. ap:af:12:be | column | OctetString | .1.3.6.1.4.1.14179.2.2.1.1.3 |
| bsnAPGroupVlanName The AP Group to which this AP has been associated with.
If it is empty, then no AP Group overriding has been set. | column | OctetString | .1.3.6.1.4.1.14179.2.2.1.1.30 |
| bsnAPIOSVersion IOS Version of IOS Cisco AP. Zero length string will be
returned for other APs | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.14179.2.2.1.1.31 |
| bsnAPCertificateType Enum values denoting AP Certificate Type.
1 : manufactureinstalled : Manufacture Installed Certificate
type (MIC).
2 : selfsigned : Self Signed Certificate type (SSC).
3 : lo… | column | Enumeration | .1.3.6.1.4.1.14179.2.2.1.1.32 |
| bsnAPEthernetMacAddress The Ethernet MAC address of the AP. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.14179.2.2.1.1.33 |
| bsnAPAdminStatus deprecated Admin State of the AP | column | Enumeration | .1.3.6.1.4.1.14179.2.2.1.1.37 |
| bsnAPLocation User specified location of this AP.
While configuring AP, user should specify a location for
the AP so that its easy to figure out for some one where
the AP is located. | column | OctetString | .1.3.6.1.4.1.14179.2.2.1.1.4 |
| bsnAPMonitorOnlyMode Monitor Only Mode Setting. | column | Enumeration | .1.3.6.1.4.1.14179.2.2.1.1.5 |
| bsnAPOperationStatus Operation State of the AP. When AP associates with the
Airespace Switch its state will be associated. When Airespace
AP is disassociated from the Switch, its state will be
disass… | column | Enumeration | .1.3.6.1.4.1.14179.2.2.1.1.6 |
| bsnAPSoftwareVersion Major Minor Software Version of AP | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.14179.2.2.1.1.8 |
| bsnAPBootVersion Major Minor Boot Version of AP | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.14179.2.2.1.1.9 |