ethLanPortPriority
ALFOPLUS-SIAE-MIB ·
.1.3.6.1.4.1.3373.25.25.2.1.12
Object
column
r/w
Enumeration
Obsolete (ethEnhVlanPrioPolicy must be used)
Context
- MIB
- ALFOPLUS-SIAE-MIB
- OID
.1.3.6.1.4.1.3373.25.25.2.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ethLanPortRecord
- Table
- ethLanPortTable
- Siblings
- 32
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | disable |
2 | ieee802-1p |
3 | ipTos |
4 | ieee802-1p-ipTos |
5 | ipTos-ieee802-1p |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ethLanPortUnitId This object is used as Index of the Ethernet Lan Port Table.
It identifies one of the Equipment's unit | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.25.2.1.1 |
| ethLanPortUseCoreTag If double tagging is enable, insert the value of the leaf
ethLanSwitchCoreTag (istead of the standard value 0x8100) in the
Tag Protocol Identifier (TPID) of the leaf ethLanSwitchC… | column | Enumeration | .1.3.6.1.4.1.3373.25.25.2.1.10 |
| ethLanPortForceVlanDefaultTag This feature ensures that all frames that came from a specific
ingress port (tagged or untagged) exit the switch with the ingress
port default VID (leaf ethLanPortVlanDefaultTag) | column | Enumeration | .1.3.6.1.4.1.3373.25.25.2.1.11 |
| ethLanPortDefaultPriority Obsolete (ethEnhVlanPrioDefaultPrio must be used) | column | Integer32 | .1.3.6.1.4.1.3373.25.25.2.1.13 |
| ethLanPortEgressMode Obsolete (ethLanPortVlanInCheckEnh must be used) | column | Enumeration | .1.3.6.1.4.1.3373.25.25.2.1.14 |
| ethLanPortEgressRate The Egress Rate modify the port effective transmission rate
according the following formula:
bitrate = 8/(32x10e-9 * DIV)
where DIV is the value of t… | column | Integer32 | .1.3.6.1.4.1.3373.25.25.2.1.15 |
| ethLanPortIngressLimitMode Ingress Limit Mode. This leaf determine what kinds of frames are
limited and counted against Ingress rate limiting as follows:
limit-all: limit and coun… | column | Enumeration | .1.3.6.1.4.1.3373.25.25.2.1.16 |
| ethLanPortPrio0IngressRate Ingress data rate limit for priority 0 frames. Priority 0 frames
are discarded after the ingress rate selected is reached or
exceeded. The data rate is calculated according the fo… | column | Integer32 | .1.3.6.1.4.1.3373.25.25.2.1.17 |
| ethLanPortPrio1IngressRate Ingress data rate limit for priority 1 frames. Priority 1 frames
are discarded after the ingress rate selected is reached or
exceeded.
The rate can be selected betw… | column | Enumeration | .1.3.6.1.4.1.3373.25.25.2.1.18 |
| ethLanPortPrio2IngressRate Ingress data rate limit for priority 2 frames. Priority 2 frames
are discarded after the ingress rate selected is reached or
exceeded.
The rate can be selected betw… | column | Enumeration | .1.3.6.1.4.1.3373.25.25.2.1.19 |
| ethLanPortId This object is used as Index of the Ethernet Lan Port Table | column | Enumeration | .1.3.6.1.4.1.3373.25.25.2.1.2 |
| ethLanPortPrio3IngressRate Ingress data rate limit for priority 2 frames. Priority 3 frames
are discarded after the ingress rate selected is reached or
exceeded.
The rate can be selected betw… | column | Enumeration | .1.3.6.1.4.1.3373.25.25.2.1.20 |
| ethLanPortStpEnable This object enables/disables the 802.1w Spanning Tree Protocol
(bridge1 / bridge2), the proprietary port protection algorithm
on a single board (pro1 / pro2) or on a node configur… | column | Enumeration | .1.3.6.1.4.1.3373.25.25.2.1.21 |
| ethLanPortStpPortPriority The priority part of the Port Identifier parameter.
The Port indentifier parameter consists of two parts. One part
bears a fixed relationship to the physical or logical support of… | column | Integer32 | .1.3.6.1.4.1.3373.25.25.2.1.22 |
| ethLanPortStpPortType The Bridge Port is or not at the edge of the Bridged LAN. | column | Enumeration | .1.3.6.1.4.1.3373.25.25.2.1.23 |
| ethLanPortStpPortPathCost The contribution of the path through this Port, when the Port is
the Root Port, to the total cost of the path to the Root for this
Bridge. This parameter is used, added to the val… | column | Integer32 | .1.3.6.1.4.1.3373.25.25.2.1.24 |
| ethLanPortStpPortRole Port Roles are assigned according to whether the port is to be part
of the active topology connecting the Bridge to the Root Bridge
(a Root Port) or connecting a LAN through the B… | column | Enumeration | .1.3.6.1.4.1.3373.25.25.2.1.25 |
| ethLanPortStatus Port status. This value are calculate by the 802.1D Spanning
Tree to determine what kind of frames, if any, are allowed to
enter or leave this port. The status can be:
- DISABLE… | column | Enumeration | .1.3.6.1.4.1.3373.25.25.2.1.26 |
| ethLanPortStpWorkingVersion Protocol Version running on this Port. | column | Enumeration | .1.3.6.1.4.1.3373.25.25.2.1.27 |
| ethLanPortRateControlEnable This object indicates whether the rate of control is supported by
the Ethernet switch | column | Enumeration | .1.3.6.1.4.1.3373.25.25.2.1.28 |
| ethLanPortTrunkEnable This object enables/disables port aggregation (trunking).
The port belonging to a trunk are treated as a single entity. | column | Enumeration | .1.3.6.1.4.1.3373.25.25.2.1.29 |
| ethLanPortLabel Label associated to the Ethernet Switch port:
LAN-1
LAN-2
LAN-3
LAN-4
Internal Port 1 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3373.25.25.2.1.3 |
| ethLanPortAddressLearningEnable This object enables/disables MAC address learning on this port. | column | Enumeration | .1.3.6.1.4.1.3373.25.25.2.1.30 |
| ethLanPortIeeePriorityRemap IEEE 802.1p priority remapping. The priority of incoming IEEE
tagged frames are remapped according this table.
This object is encoded as map of 32 bits, using 4 bit… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.25.2.1.31 |
| ethLanPortEtherType If ethLanPortEgressMode is set to add-double-tag, this is the
value written in the Tag Protocol Identifier (TPID) of the Tag
added to outgoing frames. If not, TPID is set with the… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.25.2.1.32 |
| ethLanPortVlanInCheckEnh This leaf substitutes ethLanPortVlanInCheck when ethernet enhanced
module is present.
It's a bitmap with this meaning:
bits 0..3 IEEE 802.1Q Mode,
bit 0 802.1Q Disabled. Use Por… | column | Enumeration | .1.3.6.1.4.1.3373.25.25.2.1.34 |
| ethLanPortEnable Enable/disable the LAN port and select the port input
rate.
The enable-in-full-rate value (2) indicates that the
port shall operate at full rate. The subsequent values
indicate th… | column | Enumeration | .1.3.6.1.4.1.3373.25.25.2.1.4 |
| ethLanPortFlowControl It enables or not the Flow Control Mode when autonegotiation is
disabled. | column | Enumeration | .1.3.6.1.4.1.3373.25.25.2.1.5 |
| ethLanPortVlanTable Port based VLAN Table. The bits in this table are used to
restrict which output this input port can send frames to.
The VLAN Table bits are used if 802.1Q is disabled on this
port… | column | Integer32 | .1.3.6.1.4.1.3373.25.25.2.1.6 |
| ethLanPortVlanInCheck Obsolete (ethLanPortVlanInCheckEnh must be used) | column | Enumeration | .1.3.6.1.4.1.3373.25.25.2.1.7 |
| ethLanPortVlanDefaultTag Default VLAN Identifier. This value is used as the IEEE Tagged VID
added to untagged or priority tagged received frames. | column | Integer32 | .1.3.6.1.4.1.3373.25.25.2.1.8 |
| ethLanPortIngressMode Enable the removal of the extra 802.3ac TAG from the ingress
packets. | column | Enumeration | .1.3.6.1.4.1.3373.25.25.2.1.9 |