ethLanPortIeeePriorityRemap

ALFOPLUS-SIAE-MIB · .1.3.6.1.4.1.3373.25.25.2.1.31
MIB view Table view

Object

column r/w SNMPv2-SMIInteger32 
IEEE 802.1p priority remapping. The priority of incoming IEEE
tagged frames are remapped according this table.
              
This object is encoded as map of 32 bits, using 4 bits for each
priority value:
              
bit  0-2   All IEEE tagged frames with a priority of 0 get this
           field value as the frame's new priority inside the switch.
           if a tagged frame egress the switch, this new priority
           is written to the frame's tag
bit  3     not used
bit  4-6   All IEEE tagged frames with a priority of 1 get this
           field value as the frame's new priority inside the switch.
           if a tagged frame egress the switch, this new priority
           is written to the frame's tag
bit  7     not used
bit  8-10  All IEEE tagged frames with a priority of 2 get this
           field value as the frame's new priority inside the switch.
           if a tagged frame egress the switch, this new priority
           is written to the frame's tag
bit  11    not used
bit  12-14 All IEEE tagged frames with a priority of 3 get this
           field value as the frame's new priority inside the switch.
           if a tagged frame egress the switch, this new priority
           is written to the frame's tag
bit  15    not used
bit  16-18 All IEEE tagged frames with a priority of 4 get this
           field value as the frame's new priority inside the switch.
           if a tagged frame egress the switch, this new priority
           is written to the frame's tag
bit  19    not used
bit  20-22 All IEEE tagged frames with a priority of 5 get this
           field value as the frame's new priority inside the switch.
           if a tagged frame egress the switch, this new priority
           is written to the frame's tag
bit  23    not used
bit  24-26 All IEEE tagged frames with a priority of 6 get this
           field value as the frame's new priority inside the switch.
           if a tagged frame egress the switch, this new priority
           is written to the frame's tag
bit  27    not used
bit  28-30 All IEEE tagged frames with a priority of 7 get this
           field value as the frame's new priority inside the switch.
           if a tagged frame egress the switch, this new priority
           is written to the frame's tag
bit  31    not used

Context

MIB
ALFOPLUS-SIAE-MIB
OID
.1.3.6.1.4.1.3373.25.25.2.1.31
Type
column
Access
readwrite
Status
current
Parent
ethLanPortRecord
Table
ethLanPortTable
Siblings
32

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ethLanPortUnitId
This object is used as Index of the Ethernet Lan Port Table. It identifies one of the Equipment's unit
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.25.2.1.1
ethLanPortUseCoreTag
If double tagging is enable, insert the value of the leaf ethLanSwitchCoreTag (istead of the standard value 0x8100) in the Tag Protocol Identifier (TPID) of the leaf ethLanSwitchC…
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.10
ethLanPortForceVlanDefaultTag
This feature ensures that all frames that came from a specific ingress port (tagged or untagged) exit the switch with the ingress port default VID (leaf ethLanPortVlanDefaultTag)
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.11
ethLanPortPriority
Obsolete (ethEnhVlanPrioPolicy must be used)
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.12
ethLanPortDefaultPriority
Obsolete (ethEnhVlanPrioDefaultPrio must be used)
columnInteger32.1.3.6.1.4.1.3373.25.25.2.1.13
ethLanPortEgressMode
Obsolete (ethLanPortVlanInCheckEnh must be used)
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.14
ethLanPortEgressRate
The Egress Rate modify the port effective transmission rate according the following formula: bitrate = 8/(32x10e-9 * DIV) where DIV is the value of t…
columnInteger32.1.3.6.1.4.1.3373.25.25.2.1.15
ethLanPortIngressLimitMode
Ingress Limit Mode. This leaf determine what kinds of frames are limited and counted against Ingress rate limiting as follows: limit-all: limit and coun…
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.16
ethLanPortPrio0IngressRate
Ingress data rate limit for priority 0 frames. Priority 0 frames are discarded after the ingress rate selected is reached or exceeded. The data rate is calculated according the fo…
columnInteger32.1.3.6.1.4.1.3373.25.25.2.1.17
ethLanPortPrio1IngressRate
Ingress data rate limit for priority 1 frames. Priority 1 frames are discarded after the ingress rate selected is reached or exceeded. The rate can be selected betw…
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.18
ethLanPortPrio2IngressRate
Ingress data rate limit for priority 2 frames. Priority 2 frames are discarded after the ingress rate selected is reached or exceeded. The rate can be selected betw…
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.19
ethLanPortId
This object is used as Index of the Ethernet Lan Port Table
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.2
ethLanPortPrio3IngressRate
Ingress data rate limit for priority 2 frames. Priority 3 frames are discarded after the ingress rate selected is reached or exceeded. The rate can be selected betw…
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.20
ethLanPortStpEnable
This object enables/disables the 802.1w Spanning Tree Protocol (bridge1 / bridge2), the proprietary port protection algorithm on a single board (pro1 / pro2) or on a node configur…
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.21
ethLanPortStpPortPriority
The priority part of the Port Identifier parameter. The Port indentifier parameter consists of two parts. One part bears a fixed relationship to the physical or logical support of…
columnInteger32.1.3.6.1.4.1.3373.25.25.2.1.22
ethLanPortStpPortType
The Bridge Port is or not at the edge of the Bridged LAN.
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.23
ethLanPortStpPortPathCost
The contribution of the path through this Port, when the Port is the Root Port, to the total cost of the path to the Root for this Bridge. This parameter is used, added to the val…
columnInteger32.1.3.6.1.4.1.3373.25.25.2.1.24
ethLanPortStpPortRole
Port Roles are assigned according to whether the port is to be part of the active topology connecting the Bridge to the Root Bridge (a Root Port) or connecting a LAN through the B…
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.25
ethLanPortStatus
Port status. This value are calculate by the 802.1D Spanning Tree to determine what kind of frames, if any, are allowed to enter or leave this port. The status can be: - DISABLE…
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.26
ethLanPortStpWorkingVersion
Protocol Version running on this Port.
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.27
ethLanPortRateControlEnable
This object indicates whether the rate of control is supported by the Ethernet switch
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.28
ethLanPortTrunkEnable
This object enables/disables port aggregation (trunking). The port belonging to a trunk are treated as a single entity.
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.29
ethLanPortLabel
Label associated to the Ethernet Switch port: LAN-1 LAN-2 LAN-3 LAN-4 Internal Port 1
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3373.25.25.2.1.3
ethLanPortAddressLearningEnable
This object enables/disables MAC address learning on this port.
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.30
ethLanPortEtherType
If ethLanPortEgressMode is set to add-double-tag, this is the value written in the Tag Protocol Identifier (TPID) of the Tag added to outgoing frames. If not, TPID is set with the…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.25.2.1.32
ethLanPortVlanInCheckEnh
This leaf substitutes ethLanPortVlanInCheck when ethernet enhanced module is present. It's a bitmap with this meaning: bits 0..3 IEEE 802.1Q Mode, bit 0 802.1Q Disabled. Use Por…
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.34
ethLanPortEnable
Enable/disable the LAN port and select the port input rate. The enable-in-full-rate value (2) indicates that the port shall operate at full rate. The subsequent values indicate th…
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.4
ethLanPortFlowControl
It enables or not the Flow Control Mode when autonegotiation is disabled.
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.5
ethLanPortVlanTable
Port based VLAN Table. The bits in this table are used to restrict which output this input port can send frames to. The VLAN Table bits are used if 802.1Q is disabled on this port…
columnInteger32.1.3.6.1.4.1.3373.25.25.2.1.6
ethLanPortVlanInCheck
Obsolete (ethLanPortVlanInCheckEnh must be used)
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.7
ethLanPortVlanDefaultTag
Default VLAN Identifier. This value is used as the IEEE Tagged VID added to untagged or priority tagged received frames.
columnInteger32.1.3.6.1.4.1.3373.25.25.2.1.8
ethLanPortIngressMode
Enable the removal of the extra 802.3ac TAG from the ingress packets.
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.9