ethLanPortEnable

ALFOPLUS-SIAE-MIB · .1.3.6.1.4.1.3373.25.25.2.1.4
MIB view Table view

Object

column r/w Enumeration 
Enable/disable the LAN port and select the port input
rate.
The enable-in-full-rate value (2) indicates that the
port shall operate at full rate. The subsequent values
indicate that the port will be operated with a limitation
on the input rate and specify the corresponding rate limit.

Context

MIB
ALFOPLUS-SIAE-MIB
OID
.1.3.6.1.4.1.3373.25.25.2.1.4
Type
column
Access
readwrite
Status
current
Parent
ethLanPortRecord
Table
ethLanPortTable
Siblings
32

Syntax

Enumeration

Values & Constraints

Enumerated Values
1disable
2enable-in-full-rate
3enable-in-rate-64Kb
4enable-in-rate-128Kb
5enable-in-rate-256Kb
6enable-in-rate-512Kb
7enable-in-rate-1Mb
8enable-in-rate-2Mb
9enable-in-rate-3Mb
10enable-in-rate-4Mb
11enable-in-rate-5Mb
12enable-in-rate-6Mb
13enable-in-rate-7Mb
14enable-in-rate-8Mb
15enable-in-rate-9Mb
16enable-in-rate-10Mb
17enable-in-rate-20Mb
18enable-in-rate-30Mb
19enable-in-rate-40Mb
20enable-in-rate-50Mb
21enable-in-rate-60Mb
22enable-in-rate-70Mb
23enable-in-rate-80Mb
24enable-in-rate-90Mb
25enable-in-rate-100Mb
26enable-in-rate-200Mb
27enable-in-rate-300Mb
28enable-in-rate-400Mb
29enable-in-rate-500Mb
30enable-in-rate-600Mb
31enable-in-rate-700Mb
32enable-in-rate-800Mb
33enable-in-rate-900Mb
100enable-in-rate-110Mb
101enable-in-rate-120Mb
102enable-in-rate-130Mb
103enable-in-rate-140Mb
104enable-in-rate-150Mb
105enable-in-rate-160Mb
106enable-in-rate-170Mb
107enable-in-rate-180Mb
108enable-in-rate-190Mb
109enable-in-rate-210Mb
110enable-in-rate-220Mb
111enable-in-rate-230Mb
112enable-in-rate-240Mb
113enable-in-rate-250Mb
114enable-in-rate-260Mb
115enable-in-rate-270Mb
116enable-in-rate-280Mb
117enable-in-rate-290Mb
118enable-in-rate-310Mb
119enable-in-rate-320Mb
120enable-in-rate-330Mb
121enable-in-rate-340Mb
122enable-in-rate-350Mb
123enable-in-rate-360Mb
124enable-in-rate-370Mb
125enable-in-rate-380Mb
126enable-in-rate-390Mb
127enable-in-rate-410Mb
128enable-in-rate-420Mb
129enable-in-rate-430Mb
130enable-in-rate-440Mb
131enable-in-rate-450Mb
132enable-in-rate-460Mb
133enable-in-rate-470Mb
134enable-in-rate-480Mb
135enable-in-rate-490Mb
136enable-in-rate-510Mb
137enable-in-rate-520Mb
138enable-in-rate-530Mb
139enable-in-rate-540Mb
140enable-in-rate-550Mb
141enable-in-rate-560Mb
142enable-in-rate-570Mb
143enable-in-rate-580Mb
144enable-in-rate-590Mb
145enable-in-rate-610Mb
146enable-in-rate-620Mb
147enable-in-rate-630Mb
148enable-in-rate-640Mb
149enable-in-rate-650Mb
150enable-in-rate-660Mb
151enable-in-rate-670Mb
152enable-in-rate-680Mb
153enable-in-rate-690Mb
154enable-in-rate-710Mb
155enable-in-rate-720Mb
156enable-in-rate-730Mb
157enable-in-rate-740Mb
158enable-in-rate-750Mb
159enable-in-rate-760Mb
160enable-in-rate-770Mb
161enable-in-rate-780Mb
162enable-in-rate-790Mb
163enable-in-rate-810Mb
164enable-in-rate-820Mb
165enable-in-rate-830Mb
166enable-in-rate-840Mb
167enable-in-rate-850Mb
168enable-in-rate-860Mb
169enable-in-rate-870Mb
170enable-in-rate-880Mb
171enable-in-rate-890Mb
172enable-in-rate-910Mb
173enable-in-rate-920Mb
174enable-in-rate-930Mb
175enable-in-rate-940Mb
176enable-in-rate-950Mb
177enable-in-rate-960Mb
178enable-in-rate-970Mb
179enable-in-rate-980Mb
180enable-in-rate-990Mb

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ethLanPortUnitId
This object is used as Index of the Ethernet Lan Port Table. It identifies one of the Equipment's unit
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.25.2.1.1
ethLanPortUseCoreTag
If double tagging is enable, insert the value of the leaf ethLanSwitchCoreTag (istead of the standard value 0x8100) in the Tag Protocol Identifier (TPID) of the leaf ethLanSwitchC…
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.10
ethLanPortForceVlanDefaultTag
This feature ensures that all frames that came from a specific ingress port (tagged or untagged) exit the switch with the ingress port default VID (leaf ethLanPortVlanDefaultTag)
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.11
ethLanPortPriority
Obsolete (ethEnhVlanPrioPolicy must be used)
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.12
ethLanPortDefaultPriority
Obsolete (ethEnhVlanPrioDefaultPrio must be used)
columnInteger32.1.3.6.1.4.1.3373.25.25.2.1.13
ethLanPortEgressMode
Obsolete (ethLanPortVlanInCheckEnh must be used)
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.14
ethLanPortEgressRate
The Egress Rate modify the port effective transmission rate according the following formula: bitrate = 8/(32x10e-9 * DIV) where DIV is the value of t…
columnInteger32.1.3.6.1.4.1.3373.25.25.2.1.15
ethLanPortIngressLimitMode
Ingress Limit Mode. This leaf determine what kinds of frames are limited and counted against Ingress rate limiting as follows: limit-all: limit and coun…
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.16
ethLanPortPrio0IngressRate
Ingress data rate limit for priority 0 frames. Priority 0 frames are discarded after the ingress rate selected is reached or exceeded. The data rate is calculated according the fo…
columnInteger32.1.3.6.1.4.1.3373.25.25.2.1.17
ethLanPortPrio1IngressRate
Ingress data rate limit for priority 1 frames. Priority 1 frames are discarded after the ingress rate selected is reached or exceeded. The rate can be selected betw…
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.18
ethLanPortPrio2IngressRate
Ingress data rate limit for priority 2 frames. Priority 2 frames are discarded after the ingress rate selected is reached or exceeded. The rate can be selected betw…
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.19
ethLanPortId
This object is used as Index of the Ethernet Lan Port Table
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.2
ethLanPortPrio3IngressRate
Ingress data rate limit for priority 2 frames. Priority 3 frames are discarded after the ingress rate selected is reached or exceeded. The rate can be selected betw…
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.20
ethLanPortStpEnable
This object enables/disables the 802.1w Spanning Tree Protocol (bridge1 / bridge2), the proprietary port protection algorithm on a single board (pro1 / pro2) or on a node configur…
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.21
ethLanPortStpPortPriority
The priority part of the Port Identifier parameter. The Port indentifier parameter consists of two parts. One part bears a fixed relationship to the physical or logical support of…
columnInteger32.1.3.6.1.4.1.3373.25.25.2.1.22
ethLanPortStpPortType
The Bridge Port is or not at the edge of the Bridged LAN.
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.23
ethLanPortStpPortPathCost
The contribution of the path through this Port, when the Port is the Root Port, to the total cost of the path to the Root for this Bridge. This parameter is used, added to the val…
columnInteger32.1.3.6.1.4.1.3373.25.25.2.1.24
ethLanPortStpPortRole
Port Roles are assigned according to whether the port is to be part of the active topology connecting the Bridge to the Root Bridge (a Root Port) or connecting a LAN through the B…
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.25
ethLanPortStatus
Port status. This value are calculate by the 802.1D Spanning Tree to determine what kind of frames, if any, are allowed to enter or leave this port. The status can be: - DISABLE…
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.26
ethLanPortStpWorkingVersion
Protocol Version running on this Port.
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.27
ethLanPortRateControlEnable
This object indicates whether the rate of control is supported by the Ethernet switch
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.28
ethLanPortTrunkEnable
This object enables/disables port aggregation (trunking). The port belonging to a trunk are treated as a single entity.
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.29
ethLanPortLabel
Label associated to the Ethernet Switch port: LAN-1 LAN-2 LAN-3 LAN-4 Internal Port 1
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3373.25.25.2.1.3
ethLanPortAddressLearningEnable
This object enables/disables MAC address learning on this port.
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.30
ethLanPortIeeePriorityRemap
IEEE 802.1p priority remapping. The priority of incoming IEEE tagged frames are remapped according this table. This object is encoded as map of 32 bits, using 4 bit…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.25.2.1.31
ethLanPortEtherType
If ethLanPortEgressMode is set to add-double-tag, this is the value written in the Tag Protocol Identifier (TPID) of the Tag added to outgoing frames. If not, TPID is set with the…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.25.2.1.32
ethLanPortVlanInCheckEnh
This leaf substitutes ethLanPortVlanInCheck when ethernet enhanced module is present. It's a bitmap with this meaning: bits 0..3 IEEE 802.1Q Mode, bit 0 802.1Q Disabled. Use Por…
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.34
ethLanPortFlowControl
It enables or not the Flow Control Mode when autonegotiation is disabled.
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.5
ethLanPortVlanTable
Port based VLAN Table. The bits in this table are used to restrict which output this input port can send frames to. The VLAN Table bits are used if 802.1Q is disabled on this port…
columnInteger32.1.3.6.1.4.1.3373.25.25.2.1.6
ethLanPortVlanInCheck
Obsolete (ethLanPortVlanInCheckEnh must be used)
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.7
ethLanPortVlanDefaultTag
Default VLAN Identifier. This value is used as the IEEE Tagged VID added to untagged or priority tagged received frames.
columnInteger32.1.3.6.1.4.1.3373.25.25.2.1.8
ethLanPortIngressMode
Enable the removal of the extra 802.3ac TAG from the ingress packets.
columnEnumeration.1.3.6.1.4.1.3373.25.25.2.1.9