ahAlarmMsgMapAlertEvent
AH_TRAP_MIB ·
.1.3.6.1.4.1.26928.1.1.1.1.1.12
Object
notification
HiveOS will send two different kinds of level alert: interface level alert, and client level alert. There are four alert types, CRC error rate, TX drop/retry rate, Rx drop rate; interface level includes all alert type, the client level includes Tx drop/retry rate, Rx drop Rate; the 'set' alert means there is an alert raised, with type indicated in the alert type field, the 'clear' alert means the previous alert condition has been cleared.
Context
- MIB
- AH_TRAP_MIB
- OID
.1.3.6.1.4.1.26928.1.1.1.1.1.12- Type
- notification
- Status
- current
- Parent
- ahTrapModule
- Siblings
- 11
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ahFailureTrap This event is generated for any equipment or software failures. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.1 |
| ahInterferenceMapAlertEvent For every one minute interval, AP will monitor the interference channel utilizations
(snapshot, short term means average and running average) and CRC error rate
against their thr… | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.10 |
| ahBandwidthSentinelEvent HiveOS will send two different kinds of traps: bandwidth sentinel alert trap, and bandwidth sentinel clear trap.
The ��alert�� trap will serve the purpose to tell HM that the clie… | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.11 |
| ahThresholdCrossingEvent This event is generated whenever a threshold is crossed for the first time. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.2 |
| ahStateChangeEvent This event is generated whenever an object state change occurs. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.3 |
| ahConnectionChangeEvent This event is generated whenever a connection state change
occurs. The connection might be between a HiveAP and its client,
or between a HiveAP and a neighboring HiveAP. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.4 |
| ahIDPStationEvent This event is generated whenever IDP detects an AP
in its neighborhood. The ahRomoteId indicates the detected AP
MAC address, and the ahIDPCompliance indicates conformance of
IDP… | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.5 |
| ahClientInfoEvent This event is generated whenever HiveAP a new client
makes an association and its IP address, hostname, and
User name is obtained. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.6 |
| ahPoEEvent This event is generated whenever a HiveAP (802.11n
product line) boots up or changes power levels. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.7 |
| ahChannelPowerChangeEvent This event is generated whenever a HiveAP boots up,
or changes channels or power levels. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.8 |
| ahIDPMitigateEvent This event is generated whenever IDP detects an rogue client
connect to a rogue AP. The ahRomoteId indicates the detected
Station MAC address. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ahAPId It is the node ID (MAC address in hexadecimal format)
of the HiveAP where the trap is generated. If a HiveAP is
configured with 2 hives, the node ID is the first MAC address
of … | scalar | AH-SMI-MIBAhNodeID | .1.3.6.1.4.1.26928.1.1.1.1.2.1 |
| ahAPName The host name of the HiveAP where the trap is generated. | scalar | AH-SMI-MIBAhString | .1.3.6.1.4.1.26928.1.1.1.1.2.2 |
| ahIfIndex The interface index used to identify uniquely
an interface (logical or physical). | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.13 |
| ahObjectName It describes the object for which the trap is generated. | scalar | OctetString | .1.3.6.1.4.1.26928.1.1.1.1.2.4 |
| ahLevel The level value will tell HM whether this is an interface level alert or a client alert. | scalar | Enumeration | .1.3.6.1.4.1.26928.1.1.1.1.2.64 |
| ahClientMAC It contains the MAC address of the wireless client. It is
required. | scalar | AH-SMI-MIBAhNodeID | .1.3.6.1.4.1.26928.1.1.1.1.2.24 |
| ahSSID It contains the SSID name for the detected AP. | scalar | OctetString | .1.3.6.1.4.1.26928.1.1.1.1.2.20 |
| ahAlarmAlertType There are five types, CRC Rate only applies to interface level alert,
TX drop/retry rate is is calculated based on retries over total unicast TX frames,
RX drop rate is calculate… | scalar | Enumeration | .1.3.6.1.4.1.26928.1.1.1.1.2.65 |
| ahThresholdValue the configured CRC error rate, TX drop/retry rate, RX drop rate threshold. it is defined by CLI config. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.66 |
| ahShortTermValue the percentage of this sampling period, CRC error rate, TX drop/retry rate, RX drop rate. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.67 |
| ahSnapshotValue the snapshot value of CRC error rate, TX drop/retry rate, RX drop rate. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.68 |
| ahFailureSet It is the Boolean datatype indicating whether this failure(alert) is on or off. | scalar | - | .1.3.6.1.4.1.26928.1.1.1.1.2.55 |
| ahCode It contains access information to the Aerohive
logging/action dictionary. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.12 |
| ahTrapDesc It contains the description of the trap. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26928.1.1.1.1.2.11 |