Standard view Table view

AH_TRAP_MIB

        This is the MIB module for access point trap definitions 
for Aerohive Networks Inc.
ahTrapModule 1.3.6.1.4.1.26928.1.1.1.1.1
Imported Objects
AH-SMI-MIB ahAPTrap AhMACProtocol AhNodeID AhString
SNMPv2-SMI MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TC DisplayString
Type Definitions (2)
AhProbableCause Enumeration
ahClear(0)
ahUnknown(1)
ahFlashFailure(2)
ahFanFailure(3)
ahPowerSupplyFailure(4)
ahSoftwareUpgradeFailure(5)
ahRadioFailure(6)
ahConfFailure(7)
AhState Enumeration
ahUp(1)
ahDown(2)
Objects (71)
ahTrapModule .1.3.6.1.4.1.26928.1.1.1.1.1
ahNotificationVarBind .1.3.6.1.4.1.26928.1.1.1.1.2
ahAPId AH-SMI-MIBAhNodeID .1.3.6.1.4.1.26928.1.1.1.1.2.1
ahCurrentState AhState .1.3.6.1.4.1.26928.1.1.1.1.2.10
ahTrapDesc SNMPv2-TCDisplayString .1.3.6.1.4.1.26928.1.1.1.1.2.11
ahCode Integer32 .1.3.6.1.4.1.26928.1.1.1.1.2.12
ahIfIndex Integer32 .1.3.6.1.4.1.26928.1.1.1.1.2.13
ahObjectType Enumeration .1.3.6.1.4.1.26928.1.1.1.1.2.14
ahRemoteId AH-SMI-MIBAhNodeID .1.3.6.1.4.1.26928.1.1.1.1.2.15
ahIDPType Enumeration .1.3.6.1.4.1.26928.1.1.1.1.2.16
ahIDPChannel Integer32 .1.3.6.1.4.1.26928.1.1.1.1.2.17
ahIDPRSSI Integer32 .1.3.6.1.4.1.26928.1.1.1.1.2.18
ahIDPCompliance Enumeration .1.3.6.1.4.1.26928.1.1.1.1.2.19
ahAPName AH-SMI-MIBAhString .1.3.6.1.4.1.26928.1.1.1.1.2.2
ahSSID OctetString .1.3.6.1.4.1.26928.1.1.1.1.2.20
ahStationType Enumeration .1.3.6.1.4.1.26928.1.1.1.1.2.21
ahIDPStationData Enumeration .1.3.6.1.4.1.26928.1.1.1.1.2.22
ahRemoved Enumeration .1.3.6.1.4.1.26928.1.1.1.1.2.23
ahClientMAC AH-SMI-MIBAhNodeID .1.3.6.1.4.1.26928.1.1.1.1.2.24
ahCLientIP SNMPv2-TCDisplayString .1.3.6.1.4.1.26928.1.1.1.1.2.25
ahClientHostName SNMPv2-TCDisplayString .1.3.6.1.4.1.26928.1.1.1.1.2.26
ahClientUserName SNMPv2-TCDisplayString .1.3.6.1.4.1.26928.1.1.1.1.2.27
ahPowerSrc Enumeration .1.3.6.1.4.1.26928.1.1.1.1.2.28
ahPoEEth0On .1.3.6.1.4.1.26928.1.1.1.1.2.29
ahSeverity Enumeration .1.3.6.1.4.1.26928.1.1.1.1.2.3
ahPoEEth0Pwr Integer32 .1.3.6.1.4.1.26928.1.1.1.1.2.30
ahPoEEth1On .1.3.6.1.4.1.26928.1.1.1.1.2.31
ahPoEEth1Pwr Integer32 .1.3.6.1.4.1.26928.1.1.1.1.2.32
ahRadioChannel Integer32 .1.3.6.1.4.1.26928.1.1.1.1.2.33
ahRadioTxPower Integer32 .1.3.6.1.4.1.26928.1.1.1.1.2.34
ahClientAuthMethod .1.3.6.1.4.1.26928.1.1.1.1.2.35
ahClientEncryptionMethod .1.3.6.1.4.1.26928.1.1.1.1.2.36
ahClientMACProtocol AH-SMI-MIBAhMACProtocol .1.3.6.1.4.1.26928.1.1.1.1.2.37
ahClientVLAN Integer32 .1.3.6.1.4.1.26928.1.1.1.1.2.38
ahClientUserProfId Integer32 .1.3.6.1.4.1.26928.1.1.1.1.2.39
ahObjectName OctetString .1.3.6.1.4.1.26928.1.1.1.1.2.4
ahClientChannel Integer32 .1.3.6.1.4.1.26928.1.1.1.1.2.40
ahClientCWPUsed .1.3.6.1.4.1.26928.1.1.1.1.2.41
ahBSSID AH-SMI-MIBAhNodeID .1.3.6.1.4.1.26928.1.1.1.1.2.42
ahPoEEth0MaxSpeed Enumeration .1.3.6.1.4.1.26928.1.1.1.1.2.43
ahPoEEth1MaxSpeed Enumeration .1.3.6.1.4.1.26928.1.1.1.1.2.44
ahPoEWifi0Setting Enumeration .1.3.6.1.4.1.26928.1.1.1.1.2.45
ahPoEWifi1Setting Enumeration .1.3.6.1.4.1.26928.1.1.1.1.2.46
ahPoEWifi2Setting Enumeration .1.3.6.1.4.1.26928.1.1.1.1.2.47
ahAssociationTime SNMPv2-SMICounter32 .1.3.6.1.4.1.26928.1.1.1.1.2.48
ahIDPInNet .1.3.6.1.4.1.26928.1.1.1.1.2.49
ahProbableCause AhProbableCause .1.3.6.1.4.1.26928.1.1.1.1.2.5
ahDiscoverAge SNMPv2-SMICounter32 .1.3.6.1.4.1.26928.1.1.1.1.2.50
ahUpdateAge SNMPv2-SMICounter32 .1.3.6.1.4.1.26928.1.1.1.1.2.51
ahRunningAverageInterference Integer32 .1.3.6.1.4.1.26928.1.1.1.1.2.52
ahShortTermInterference Integer32 .1.3.6.1.4.1.26928.1.1.1.1.2.53
ahSnapshotInterference Integer32 .1.3.6.1.4.1.26928.1.1.1.1.2.54
ahFailureSet .1.3.6.1.4.1.26928.1.1.1.1.2.55
ahInterferenceThreshold Integer32 .1.3.6.1.4.1.26928.1.1.1.1.2.56
ahCRCErrRateThreshold Integer32 .1.3.6.1.4.1.26928.1.1.1.1.2.57
ahCRCErrRate Integer32 .1.3.6.1.4.1.26928.1.1.1.1.2.58
ahBandwidthSentinelStatus Enumeration .1.3.6.1.4.1.26928.1.1.1.1.2.59
ahCurValue Integer32 .1.3.6.1.4.1.26928.1.1.1.1.2.6
ahGuaranteedBandwidth Integer32 .1.3.6.1.4.1.26928.1.1.1.1.2.60
ahActualBandwidth Integer32 .1.3.6.1.4.1.26928.1.1.1.1.2.61
ahBandwidthSentinelAction SNMPv2-SMICounter32 .1.3.6.1.4.1.26928.1.1.1.1.2.62
ahBeaconInterval SNMPv2-SMICounter32 .1.3.6.1.4.1.26928.1.1.1.1.2.63
ahLevel Enumeration .1.3.6.1.4.1.26928.1.1.1.1.2.64
ahAlarmAlertType Enumeration .1.3.6.1.4.1.26928.1.1.1.1.2.65
ahThresholdValue Integer32 .1.3.6.1.4.1.26928.1.1.1.1.2.66
ahShortTermValue Integer32 .1.3.6.1.4.1.26928.1.1.1.1.2.67
ahSnapshotValue Integer32 .1.3.6.1.4.1.26928.1.1.1.1.2.68
ahIfName AH-SMI-MIBAhString .1.3.6.1.4.1.26928.1.1.1.1.2.69
ahThresholdHigh Integer32 .1.3.6.1.4.1.26928.1.1.1.1.2.7
ahThresholdLow Integer32 .1.3.6.1.4.1.26928.1.1.1.1.2.8
ahPreviousState AhState .1.3.6.1.4.1.26928.1.1.1.1.2.9
Notifications / Traps (12)
NameOIDDescription
ahFailureTrap
ahAPId ahAPName ahObjectName ahSeverity ahProbableCause ahFailureSet ahCode ahTrapDesc
.1.3.6.1.4.1.26928.1.1.1.1.1.1 
This event is generated for any equipment or software failures.
ahInterferenceMapAlertEvent
ahAPId ahAPName ahIfIndex ahObjectName ahInterferenceThreshold ahRunningAverageInterference ahShortTermInterference ahSnapshotInterference ahCRCErrRateThreshold ahCRCErrRate ahSeverity ahFailureSet ahCode ahTrapDesc
.1.3.6.1.4.1.26928.1.1.1.1.1.10 
For every one minute interval, AP will monitor the interference channel utilizations
(snapshot, short term means average and running average) and CRC error rate 
against their thresholds, if any one of them is above their threshold 
(thresholds are settable by CLI), AP should send HM an interference alert event to HM.
AP will send out clear alert to HM only when: the last short term period��s CRC_error_rate,
means average Interference CU and the last snapshot interference CU are all below their thresholds.
ahBandwidthSentinelEvent
ahAPId ahAPName ahIfIndex ahObjectName ahClientMAC ahBandwidthSentinelStatus ahGuaranteedBandwidth ahActualBandwidth ahBandwidthSentinelAction ahCode ahTrapDesc
.1.3.6.1.4.1.26928.1.1.1.1.1.11 
HiveOS will send two different kinds of traps: bandwidth sentinel alert trap, and bandwidth sentinel clear trap.
The ��alert�� trap will serve the purpose to tell HM that the client is violating the bandwidth sentinel,
the ��clear�� trap will clear the previous ��alert�� trap.
ahAlarmMsgMapAlertEvent
ahAPId ahAPName ahIfIndex ahObjectName ahLevel ahClientMAC ahSSID ahAlarmAlertType ahThresholdValue ahShortTermValue ahSnapshotValue ahFailureSet ahCode ahTrapDesc
.1.3.6.1.4.1.26928.1.1.1.1.1.12 
HiveOS will send two different kinds of level alert: interface level alert, and client level alert.
There are four alert types, CRC error rate, TX drop/retry rate, Rx drop rate; interface level includes all alert type, 
the client level includes Tx drop/retry rate, Rx drop Rate; the 'set' alert means there is an alert raised, 
with type indicated in the alert type field, the 'clear' alert means the previous alert condition has been cleared.
ahThresholdCrossingEvent
ahAPId ahAPName ahObjectName ahCurValue ahThresholdHigh ahThresholdLow ahCode ahTrapDesc
.1.3.6.1.4.1.26928.1.1.1.1.1.2 
This event is generated whenever a threshold is crossed for the first time.
ahStateChangeEvent
ahAPId ahAPName ahObjectName ahPreviousState ahCurrentState ahCode ahTrapDesc
.1.3.6.1.4.1.26928.1.1.1.1.1.3 
This event is generated whenever an object state change occurs.
ahConnectionChangeEvent
ahAPId ahAPName ahObjectName ahIfIndex ahObjectType ahRemoteId ahCurrentState ahSSID ahCLientIP ahClientHostName ahClientUserName ahClientAuthMethod ahClientEncryptionMethod ahClientMACProtocol ahClientVLAN ahClientUserProfId ahClientChannel ahClientCWPUsed ahBSSID ahAssociationTime ahIfName ahIDPRSSI ahCode ahTrapDesc
.1.3.6.1.4.1.26928.1.1.1.1.1.4 
This event is generated whenever a connection state change
occurs. The connection might be between a HiveAP and its client,
or between a HiveAP and a neighboring HiveAP.
ahIDPStationEvent
ahAPId ahAPName ahIfIndex ahObjectName ahStationType ahRemoteId ahIDPType ahIDPChannel ahIDPRSSI ahIDPStationData ahIDPCompliance ahSSID ahRemoved ahIDPInNet ahCode ahTrapDesc
.1.3.6.1.4.1.26928.1.1.1.1.1.5 
This event is generated whenever IDP detects an AP 
in its neighborhood. The ahRomoteId indicates the detected AP
MAC address, and the ahIDPCompliance indicates conformance of
IDP policy this AP satisfies. The ahIDPChannel and ahIDPRSSI
indicates the radio channel and Receive Signal Strenth Indication.
ahClientInfoEvent
ahAPId ahAPName ahObjectName ahSSID ahClientMAC ahCLientIP ahClientHostName ahClientUserName ahCode ahTrapDesc
.1.3.6.1.4.1.26928.1.1.1.1.1.6 
This event is generated whenever HiveAP a new client 
makes an association and its IP address, hostname, and
User name is obtained.
ahPoEEvent
ahAPId ahAPName ahObjectName ahPowerSrc ahPoEEth0On ahPoEEth0Pwr ahPoEEth0MaxSpeed ahPoEWifi0Setting ahPoEEth1On ahPoEEth1Pwr ahPoEEth1MaxSpeed ahPoEWifi1Setting ahPoEWifi2Setting ahCode ahTrapDesc
.1.3.6.1.4.1.26928.1.1.1.1.1.7 
This event is generated whenever a HiveAP (802.11n 
product line) boots up or changes power levels.
ahChannelPowerChangeEvent
ahAPId ahAPName ahObjectName ahIfIndex ahRadioChannel ahRadioTxPower ahBeaconInterval ahCode ahTrapDesc
.1.3.6.1.4.1.26928.1.1.1.1.1.8 
This event is generated whenever a HiveAP boots up, 
or changes channels or power levels.
ahIDPMitigateEvent
ahAPId ahAPName ahIfIndex ahObjectName ahRemoteId ahBSSID ahDiscoverAge ahUpdateAge ahRemoved ahCode ahTrapDesc
.1.3.6.1.4.1.26928.1.1.1.1.1.9 
This event is generated whenever IDP detects an rogue client
connect to a rogue AP. The ahRomoteId indicates the detected 
Station MAC address.