ahLevel
AH_TRAP_MIB ·
.1.3.6.1.4.1.26928.1.1.1.1.2.64
Object
scalar
Enumeration
The level value will tell HM whether this is an interface level alert or a client alert.
Context
- MIB
- AH_TRAP_MIB
- OID
.1.3.6.1.4.1.26928.1.1.1.1.2.64- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- ahNotificationVarBind
- Siblings
- 68
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | interface |
2 | client |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ahAPId It is the node ID (MAC address in hexadecimal format)
of the HiveAP where the trap is generated. If a HiveAP is
configured with 2 hives, the node ID is the first MAC address
of … | scalar | AH-SMI-MIBAhNodeID | .1.3.6.1.4.1.26928.1.1.1.1.2.1 |
| ahCurrentState It contains the value for the current state. | scalar | AhState | .1.3.6.1.4.1.26928.1.1.1.1.2.10 |
| ahTrapDesc It contains the description of the trap. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26928.1.1.1.1.2.11 |
| ahCode It contains access information to the Aerohive
logging/action dictionary. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.12 |
| ahIfIndex The interface index used to identify uniquely
an interface (logical or physical). | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.13 |
| ahObjectType It specifies the object type: a client link or a neighbor link. | scalar | Enumeration | .1.3.6.1.4.1.26928.1.1.1.1.2.14 |
| ahRemoteId It is the MAC address of the remote node. If the remote
node is a HiveAP, the ID must be the MAC address
of its management interface. If the remote node is a
client station, it m… | scalar | AH-SMI-MIBAhNodeID | .1.3.6.1.4.1.26928.1.1.1.1.2.15 |
| ahIDPType It is used to indicate the AP identified is a
rogue, or valid, or compliant, or noncompliant, or external AP. | scalar | Enumeration | .1.3.6.1.4.1.26928.1.1.1.1.2.16 |
| ahIDPChannel It is the channel number used by the identified AP. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.17 |
| ahIDPRSSI It is the RSSI for the identified AP or Client. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.18 |
| ahIDPCompliance It is bit mask to indicate which policy the indentified
AP is compliant with (bit is set if it is NOT compliant). | scalar | Enumeration | .1.3.6.1.4.1.26928.1.1.1.1.2.19 |
| ahAPName The host name of the HiveAP where the trap is generated. | scalar | AH-SMI-MIBAhString | .1.3.6.1.4.1.26928.1.1.1.1.2.2 |
| ahSSID It contains the SSID name for the detected AP. | scalar | OctetString | .1.3.6.1.4.1.26928.1.1.1.1.2.20 |
| ahStationType It indicates whether it is event for a peer AP
or client PC | scalar | Enumeration | .1.3.6.1.4.1.26928.1.1.1.1.2.21 |
| ahIDPStationData It is bit mask to indicate policies are detected for
the identified AP . Note: the oui_policy and ssid_policy are
omitted due to the presence of the ahRemoteID, and SSID in the
t… | scalar | Enumeration | .1.3.6.1.4.1.26928.1.1.1.1.2.22 |
| ahRemoved It indicates whether the AP or client can not
be detected. | scalar | Enumeration | .1.3.6.1.4.1.26928.1.1.1.1.2.23 |
| ahClientMAC It contains the MAC address of the wireless client. It is
required. | scalar | AH-SMI-MIBAhNodeID | .1.3.6.1.4.1.26928.1.1.1.1.2.24 |
| ahCLientIP It contains the IP address of the wireless client. It is
optional. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26928.1.1.1.1.2.25 |
| ahClientHostName It contains the host name of the wireless client. It is
optional. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26928.1.1.1.1.2.26 |
| ahClientUserName It contains the user name of the wireless client. It is
optional. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26928.1.1.1.1.2.27 |
| ahPowerSrc It indicates whether the power source is from the power adaptor or PoE.
If the power source is the adaptor, PoE information in the trap is ignored. | scalar | Enumeration | .1.3.6.1.4.1.26928.1.1.1.1.2.28 |
| ahPoEEth0On It indicates whether PoE is on eth0 or not. | scalar | - | .1.3.6.1.4.1.26928.1.1.1.1.2.29 |
| ahSeverity It contains the serverity of the trap. | scalar | Enumeration | .1.3.6.1.4.1.26928.1.1.1.1.2.3 |
| ahPoEEth0Pwr It indicates the power level of PoE in watts
multiply by 10. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.30 |
| ahPoEEth1On It indicates whether PoE is on eth1 or not. | scalar | - | .1.3.6.1.4.1.26928.1.1.1.1.2.31 |
| ahPoEEth1Pwr It indicates the power level of PoE on eht1 in watts
multiply by 10. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.32 |
| ahRadioChannel It is the channel number currently in use for this radio. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.33 |
| ahRadioTxPower It is the transmit power in dBm that the radio is currently using. The range
is 0 to 20 dBm. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.34 |
| ahClientAuthMethod It is the authentication method the client uses when
communicating with the HiveAP. | scalar | - | .1.3.6.1.4.1.26928.1.1.1.1.2.35 |
| ahClientEncryptionMethod It is the encryption method the client uses when communicating
with the HiveAP. | scalar | - | .1.3.6.1.4.1.26928.1.1.1.1.2.36 |
| ahClientMACProtocol It is the radio mode the client uses when communicating
with the HiveAP. | scalar | AH-SMI-MIBAhMACProtocol | .1.3.6.1.4.1.26928.1.1.1.1.2.37 |
| ahClientVLAN It is the VLAN that the client uses when communicating
with the HiveAP. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.38 |
| ahClientUserProfId It is the user profile ID that the client uses when communicating
with the HiveAP. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.39 |
| ahObjectName It describes the object for which the trap is generated. | scalar | OctetString | .1.3.6.1.4.1.26928.1.1.1.1.2.4 |
| ahClientChannel It is the radio channel that the client uses when communicating
with the HiveAP. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.40 |
| ahClientCWPUsed It is the Boolean datatype indicating whether a captive web portal
is used. | scalar | - | .1.3.6.1.4.1.26928.1.1.1.1.2.41 |
| ahBSSID It is the basic service set identifier of the client
if the ahRemoteId is a client. | scalar | AH-SMI-MIBAhNodeID | .1.3.6.1.4.1.26928.1.1.1.1.2.42 |
| ahPoEEth0MaxSpeed It is the automatically adjusted maximum Ethernet speed
based on the power source and level. | scalar | Enumeration | .1.3.6.1.4.1.26928.1.1.1.1.2.43 |
| ahPoEEth1MaxSpeed It is the automatically adjusted maximum Ethernet speed
based on the power source and level. | scalar | Enumeration | .1.3.6.1.4.1.26928.1.1.1.1.2.44 |
| ahPoEWifi0Setting It is the automatically adjusted Wi-Fi setting based on the
power source and power level. | scalar | Enumeration | .1.3.6.1.4.1.26928.1.1.1.1.2.45 |
| ahPoEWifi1Setting It is the automatically adjusted Wi-Fi setting based on the
power source and power level. | scalar | Enumeration | .1.3.6.1.4.1.26928.1.1.1.1.2.46 |
| ahPoEWifi2Setting It is the automatically adjusted Wi-Fi setting based on the
power source and power level. | scalar | Enumeration | .1.3.6.1.4.1.26928.1.1.1.1.2.47 |
| ahAssociationTime The association time(s) of client connect or disconnect to AP. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.26928.1.1.1.1.2.48 |
| ahIDPInNet It is the Boolean datatype indicating whether AP is in local network. | scalar | - | .1.3.6.1.4.1.26928.1.1.1.1.2.49 |
| ahProbableCause It describes the probable cause of a problem. | scalar | AhProbableCause | .1.3.6.1.4.1.26928.1.1.1.1.2.5 |
| ahDiscoverAge It is the age from the rogue client is discovered. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.26928.1.1.1.1.2.50 |
| ahUpdateAge It is the age from the rogue client is updated. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.26928.1.1.1.1.2.51 |
| ahRunningAverageInterference channel utilizations running average interference. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.52 |
| ahShortTermInterference channel utilizations short term interference.
The short term period is defined by CLI config,
usually, it should be in the range of 5 minutes to 30 minutes. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.53 |
| ahSnapshotInterference channel utilizations snapshot interference. it is the last minute��s means average. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.54 |
| ahFailureSet It is the Boolean datatype indicating whether this failure(alert) is on or off. | scalar | - | .1.3.6.1.4.1.26928.1.1.1.1.2.55 |
| ahInterferenceThreshold the configured channel utilizations interference threshold.
it is defined by CLI config. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.56 |
| ahCRCErrRateThreshold the configured CRC error rate threshold. it is defined by CLI config. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.57 |
| ahCRCErrRate short term CRC error rate. The interval of the refresh of CRC error rate calculation
is the same interval as channel utilization short term means average interval. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.58 |
| ahBandwidthSentinelStatus Bandwidth sentinel status.
In alert message, the value should be zero. In clear message, the value should be 1. | scalar | Enumeration | .1.3.6.1.4.1.26928.1.1.1.1.2.59 |
| ahCurValue It contains the current value of a threshold counter. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.6 |
| ahGuaranteedBandwidth the configured guaranteed bandwidth(Kbps). it is defined by CLI config. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.60 |
| ahActualBandwidth the actual bandwidth(Kbps). | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.61 |
| ahBandwidthSentinelAction bit maps to indicate which action has been taken on this client.
bit 0: indicate whether log the guaranteed bandwidth violation or not,
bit 1: indicate whether add more token to m… | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.26928.1.1.1.1.2.62 |
| ahBeaconInterval It is the number of time units between Beacon transmissions, One time unit is
1024 microseconds. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.26928.1.1.1.1.2.63 |
| ahAlarmAlertType There are five types, CRC Rate only applies to interface level alert,
TX drop/retry rate is is calculated based on retries over total unicast TX frames,
RX drop rate is calculate… | scalar | Enumeration | .1.3.6.1.4.1.26928.1.1.1.1.2.65 |
| ahThresholdValue the configured CRC error rate, TX drop/retry rate, RX drop rate threshold. it is defined by CLI config. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.66 |
| ahShortTermValue the percentage of this sampling period, CRC error rate, TX drop/retry rate, RX drop rate. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.67 |
| ahSnapshotValue the snapshot value of CRC error rate, TX drop/retry rate, RX drop rate. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.68 |
| ahIfName Name - uniquely identifies an AP Interface. | scalar | AH-SMI-MIBAhString | .1.3.6.1.4.1.26928.1.1.1.1.2.69 |
| ahThresholdHigh It contains the value for a high threshold. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.7 |
| ahThresholdLow It contains the value for a low threshold. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.8 |
| ahPreviousState It contains the value for a previous state. | scalar | AhState | .1.3.6.1.4.1.26928.1.1.1.1.2.9 |