ahIDPStationEvent
AH_TRAP_MIB ·
.1.3.6.1.4.1.26928.1.1.1.1.1.5
Object
notification
This event is generated whenever IDP detects an AP in its neighborhood. The ahRomoteId indicates the detected AP MAC address, and the ahIDPCompliance indicates conformance of IDP policy this AP satisfies. The ahIDPChannel and ahIDPRSSI indicates the radio channel and Receive Signal Strenth Indication.
Context
- MIB
- AH_TRAP_MIB
- OID
.1.3.6.1.4.1.26928.1.1.1.1.1.5- Type
- notification
- Status
- current
- Parent
- ahTrapModule
- Siblings
- 11
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ahFailureTrap This event is generated for any equipment or software failures. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.1 |
| ahInterferenceMapAlertEvent For every one minute interval, AP will monitor the interference channel utilizations
(snapshot, short term means average and running average) and CRC error rate
against their thr… | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.10 |
| ahBandwidthSentinelEvent HiveOS will send two different kinds of traps: bandwidth sentinel alert trap, and bandwidth sentinel clear trap.
The ��alert�� trap will serve the purpose to tell HM that the clie… | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.11 |
| ahAlarmMsgMapAlertEvent HiveOS will send two different kinds of level alert: interface level alert, and client level alert.
There are four alert types, CRC error rate, TX drop/retry rate, Rx drop rate; i… | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.12 |
| ahThresholdCrossingEvent This event is generated whenever a threshold is crossed for the first time. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.2 |
| ahStateChangeEvent This event is generated whenever an object state change occurs. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.3 |
| ahConnectionChangeEvent This event is generated whenever a connection state change
occurs. The connection might be between a HiveAP and its client,
or between a HiveAP and a neighboring HiveAP. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.4 |
| ahClientInfoEvent This event is generated whenever HiveAP a new client
makes an association and its IP address, hostname, and
User name is obtained. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.6 |
| ahPoEEvent This event is generated whenever a HiveAP (802.11n
product line) boots up or changes power levels. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.7 |
| ahChannelPowerChangeEvent This event is generated whenever a HiveAP boots up,
or changes channels or power levels. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.8 |
| ahIDPMitigateEvent This event is generated whenever IDP detects an rogue client
connect to a rogue AP. The ahRomoteId indicates the detected
Station MAC address. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ahAPId It is the node ID (MAC address in hexadecimal format)
of the HiveAP where the trap is generated. If a HiveAP is
configured with 2 hives, the node ID is the first MAC address
of … | scalar | AH-SMI-MIBAhNodeID | .1.3.6.1.4.1.26928.1.1.1.1.2.1 |
| ahAPName The host name of the HiveAP where the trap is generated. | scalar | AH-SMI-MIBAhString | .1.3.6.1.4.1.26928.1.1.1.1.2.2 |
| ahIfIndex The interface index used to identify uniquely
an interface (logical or physical). | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.13 |
| ahObjectName It describes the object for which the trap is generated. | scalar | OctetString | .1.3.6.1.4.1.26928.1.1.1.1.2.4 |
| ahStationType It indicates whether it is event for a peer AP
or client PC | scalar | Enumeration | .1.3.6.1.4.1.26928.1.1.1.1.2.21 |
| ahRemoteId It is the MAC address of the remote node. If the remote
node is a HiveAP, the ID must be the MAC address
of its management interface. If the remote node is a
client station, it m… | scalar | AH-SMI-MIBAhNodeID | .1.3.6.1.4.1.26928.1.1.1.1.2.15 |
| ahIDPType It is used to indicate the AP identified is a
rogue, or valid, or compliant, or noncompliant, or external AP. | scalar | Enumeration | .1.3.6.1.4.1.26928.1.1.1.1.2.16 |
| ahIDPChannel It is the channel number used by the identified AP. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.17 |
| ahIDPRSSI It is the RSSI for the identified AP or Client. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.18 |
| ahIDPStationData It is bit mask to indicate policies are detected for
the identified AP . Note: the oui_policy and ssid_policy are
omitted due to the presence of the ahRemoteID, and SSID in the
t… | scalar | Enumeration | .1.3.6.1.4.1.26928.1.1.1.1.2.22 |
| ahIDPCompliance It is bit mask to indicate which policy the indentified
AP is compliant with (bit is set if it is NOT compliant). | scalar | Enumeration | .1.3.6.1.4.1.26928.1.1.1.1.2.19 |
| ahSSID It contains the SSID name for the detected AP. | scalar | OctetString | .1.3.6.1.4.1.26928.1.1.1.1.2.20 |
| ahRemoved It indicates whether the AP or client can not
be detected. | scalar | Enumeration | .1.3.6.1.4.1.26928.1.1.1.1.2.23 |
| ahIDPInNet It is the Boolean datatype indicating whether AP is in local network. | scalar | - | .1.3.6.1.4.1.26928.1.1.1.1.2.49 |
| ahCode It contains access information to the Aerohive
logging/action dictionary. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.12 |
| ahTrapDesc It contains the description of the trap. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26928.1.1.1.1.2.11 |