ahConnectionChangeEvent
AH_TRAP_MIB ·
.1.3.6.1.4.1.26928.1.1.1.1.1.4
Object
notification
This event is generated whenever a connection state change occurs. The connection might be between a HiveAP and its client, or between a HiveAP and a neighboring HiveAP.
Context
- MIB
- AH_TRAP_MIB
- OID
.1.3.6.1.4.1.26928.1.1.1.1.1.4- Type
- notification
- Status
- current
- Parent
- ahTrapModule
- Siblings
- 11
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ahFailureTrap This event is generated for any equipment or software failures. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.1 |
| ahInterferenceMapAlertEvent For every one minute interval, AP will monitor the interference channel utilizations
(snapshot, short term means average and running average) and CRC error rate
against their thr… | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.10 |
| ahBandwidthSentinelEvent HiveOS will send two different kinds of traps: bandwidth sentinel alert trap, and bandwidth sentinel clear trap.
The ��alert�� trap will serve the purpose to tell HM that the clie… | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.11 |
| ahAlarmMsgMapAlertEvent HiveOS will send two different kinds of level alert: interface level alert, and client level alert.
There are four alert types, CRC error rate, TX drop/retry rate, Rx drop rate; i… | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.12 |
| ahThresholdCrossingEvent This event is generated whenever a threshold is crossed for the first time. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.2 |
| ahStateChangeEvent This event is generated whenever an object state change occurs. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.3 |
| ahIDPStationEvent This event is generated whenever IDP detects an AP
in its neighborhood. The ahRomoteId indicates the detected AP
MAC address, and the ahIDPCompliance indicates conformance of
IDP… | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.5 |
| ahClientInfoEvent This event is generated whenever HiveAP a new client
makes an association and its IP address, hostname, and
User name is obtained. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.6 |
| ahPoEEvent This event is generated whenever a HiveAP (802.11n
product line) boots up or changes power levels. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.7 |
| ahChannelPowerChangeEvent This event is generated whenever a HiveAP boots up,
or changes channels or power levels. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.8 |
| ahIDPMitigateEvent This event is generated whenever IDP detects an rogue client
connect to a rogue AP. The ahRomoteId indicates the detected
Station MAC address. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ahAPId It is the node ID (MAC address in hexadecimal format)
of the HiveAP where the trap is generated. If a HiveAP is
configured with 2 hives, the node ID is the first MAC address
of … | scalar | AH-SMI-MIBAhNodeID | .1.3.6.1.4.1.26928.1.1.1.1.2.1 |
| ahAPName The host name of the HiveAP where the trap is generated. | scalar | AH-SMI-MIBAhString | .1.3.6.1.4.1.26928.1.1.1.1.2.2 |
| ahObjectName It describes the object for which the trap is generated. | scalar | OctetString | .1.3.6.1.4.1.26928.1.1.1.1.2.4 |
| ahIfIndex The interface index used to identify uniquely
an interface (logical or physical). | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.13 |
| ahObjectType It specifies the object type: a client link or a neighbor link. | scalar | Enumeration | .1.3.6.1.4.1.26928.1.1.1.1.2.14 |
| ahRemoteId It is the MAC address of the remote node. If the remote
node is a HiveAP, the ID must be the MAC address
of its management interface. If the remote node is a
client station, it m… | scalar | AH-SMI-MIBAhNodeID | .1.3.6.1.4.1.26928.1.1.1.1.2.15 |
| ahCurrentState It contains the value for the current state. | scalar | AhState | .1.3.6.1.4.1.26928.1.1.1.1.2.10 |
| ahSSID It contains the SSID name for the detected AP. | scalar | OctetString | .1.3.6.1.4.1.26928.1.1.1.1.2.20 |
| ahCLientIP It contains the IP address of the wireless client. It is
optional. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26928.1.1.1.1.2.25 |
| ahClientHostName It contains the host name of the wireless client. It is
optional. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26928.1.1.1.1.2.26 |
| ahClientUserName It contains the user name of the wireless client. It is
optional. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26928.1.1.1.1.2.27 |
| ahClientAuthMethod It is the authentication method the client uses when
communicating with the HiveAP. | scalar | - | .1.3.6.1.4.1.26928.1.1.1.1.2.35 |
| ahClientEncryptionMethod It is the encryption method the client uses when communicating
with the HiveAP. | scalar | - | .1.3.6.1.4.1.26928.1.1.1.1.2.36 |
| ahClientMACProtocol It is the radio mode the client uses when communicating
with the HiveAP. | scalar | AH-SMI-MIBAhMACProtocol | .1.3.6.1.4.1.26928.1.1.1.1.2.37 |
| ahClientVLAN It is the VLAN that the client uses when communicating
with the HiveAP. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.38 |
| ahClientUserProfId It is the user profile ID that the client uses when communicating
with the HiveAP. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.39 |
| ahClientChannel It is the radio channel that the client uses when communicating
with the HiveAP. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.40 |
| ahClientCWPUsed It is the Boolean datatype indicating whether a captive web portal
is used. | scalar | - | .1.3.6.1.4.1.26928.1.1.1.1.2.41 |
| ahBSSID It is the basic service set identifier of the client
if the ahRemoteId is a client. | scalar | AH-SMI-MIBAhNodeID | .1.3.6.1.4.1.26928.1.1.1.1.2.42 |
| ahAssociationTime The association time(s) of client connect or disconnect to AP. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.26928.1.1.1.1.2.48 |
| ahIfName Name - uniquely identifies an AP Interface. | scalar | AH-SMI-MIBAhString | .1.3.6.1.4.1.26928.1.1.1.1.2.69 |
| ahIDPRSSI It is the RSSI for the identified AP or Client. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.18 |
| ahCode It contains access information to the Aerohive
logging/action dictionary. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.12 |
| ahTrapDesc It contains the description of the trap. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26928.1.1.1.1.2.11 |