ahInterferenceMapAlertEvent
AH_TRAP_MIB ·
.1.3.6.1.4.1.26928.1.1.1.1.1.10
Object
notification
For every one minute interval, AP will monitor the interference channel utilizations (snapshot, short term means average and running average) and CRC error rate against their thresholds, if any one of them is above their threshold (thresholds are settable by CLI), AP should send HM an interference alert event to HM. AP will send out clear alert to HM only when: the last short term period��s CRC_error_rate, means average Interference CU and the last snapshot interference CU are all below their thresholds.
Context
- MIB
- AH_TRAP_MIB
- OID
.1.3.6.1.4.1.26928.1.1.1.1.1.10- Type
- notification
- Status
- current
- Parent
- ahTrapModule
- Siblings
- 11
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ahFailureTrap This event is generated for any equipment or software failures. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.1 |
| ahBandwidthSentinelEvent HiveOS will send two different kinds of traps: bandwidth sentinel alert trap, and bandwidth sentinel clear trap.
The ��alert�� trap will serve the purpose to tell HM that the clie… | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.11 |
| ahAlarmMsgMapAlertEvent HiveOS will send two different kinds of level alert: interface level alert, and client level alert.
There are four alert types, CRC error rate, TX drop/retry rate, Rx drop rate; i… | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.12 |
| ahThresholdCrossingEvent This event is generated whenever a threshold is crossed for the first time. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.2 |
| ahStateChangeEvent This event is generated whenever an object state change occurs. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.3 |
| ahConnectionChangeEvent This event is generated whenever a connection state change
occurs. The connection might be between a HiveAP and its client,
or between a HiveAP and a neighboring HiveAP. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.4 |
| ahIDPStationEvent This event is generated whenever IDP detects an AP
in its neighborhood. The ahRomoteId indicates the detected AP
MAC address, and the ahIDPCompliance indicates conformance of
IDP… | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.5 |
| ahClientInfoEvent This event is generated whenever HiveAP a new client
makes an association and its IP address, hostname, and
User name is obtained. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.6 |
| ahPoEEvent This event is generated whenever a HiveAP (802.11n
product line) boots up or changes power levels. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.7 |
| ahChannelPowerChangeEvent This event is generated whenever a HiveAP boots up,
or changes channels or power levels. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.8 |
| ahIDPMitigateEvent This event is generated whenever IDP detects an rogue client
connect to a rogue AP. The ahRomoteId indicates the detected
Station MAC address. | notification | - | .1.3.6.1.4.1.26928.1.1.1.1.1.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ahAPId It is the node ID (MAC address in hexadecimal format)
of the HiveAP where the trap is generated. If a HiveAP is
configured with 2 hives, the node ID is the first MAC address
of … | scalar | AH-SMI-MIBAhNodeID | .1.3.6.1.4.1.26928.1.1.1.1.2.1 |
| ahAPName The host name of the HiveAP where the trap is generated. | scalar | AH-SMI-MIBAhString | .1.3.6.1.4.1.26928.1.1.1.1.2.2 |
| ahIfIndex The interface index used to identify uniquely
an interface (logical or physical). | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.13 |
| ahObjectName It describes the object for which the trap is generated. | scalar | OctetString | .1.3.6.1.4.1.26928.1.1.1.1.2.4 |
| ahInterferenceThreshold the configured channel utilizations interference threshold.
it is defined by CLI config. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.56 |
| ahRunningAverageInterference channel utilizations running average interference. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.52 |
| ahShortTermInterference channel utilizations short term interference.
The short term period is defined by CLI config,
usually, it should be in the range of 5 minutes to 30 minutes. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.53 |
| ahSnapshotInterference channel utilizations snapshot interference. it is the last minute��s means average. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.54 |
| ahCRCErrRateThreshold the configured CRC error rate threshold. it is defined by CLI config. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.57 |
| ahCRCErrRate short term CRC error rate. The interval of the refresh of CRC error rate calculation
is the same interval as channel utilization short term means average interval. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.58 |
| ahSeverity It contains the serverity of the trap. | scalar | Enumeration | .1.3.6.1.4.1.26928.1.1.1.1.2.3 |
| ahFailureSet It is the Boolean datatype indicating whether this failure(alert) is on or off. | scalar | - | .1.3.6.1.4.1.26928.1.1.1.1.2.55 |
| ahCode It contains access information to the Aerohive
logging/action dictionary. | scalar | Integer32 | .1.3.6.1.4.1.26928.1.1.1.1.2.12 |
| ahTrapDesc It contains the description of the trap. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26928.1.1.1.1.2.11 |