ZTE-AN-XDSL2-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
218

zxAnXdsl2LineTable

table
.1.3.6.1.4.1.3902.1015.1001.1.2.1 · 1 row entry · 47 columns
Open in standard view 
The table zxAnXdsl2LineTable contains configuration,
command and status parameters of the VDSL2/ADSL/ADSL2
or ADSL2+ line.
The index of this table is an interface index where the
interface has an ifType of vdsl2(xxx).
          
Several objects in this table MUST be maintained in a
 persistent manner.
zxAnXdsl2LineEntry entry .1.3.6.1.4.1.3902.1015.1001.1.2.1.1
The table zxAnXdsl2LineTable contains configuration,
commands and status parameters of the VDSL2/ADSL/ADSL2
or ADSL2+ line.
Indexes
IF-MIBifIndex
Column Syntax OID
zxAnXdsl2LineBaseConfProfile
The value of this object identifies the row in the xDSL2
Line Basic Profile Table, (zxAnZxAnXdsl2BaseConfProfTable),
which applies for this line.

This object MUST be maintained in a persistent manner.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.1
zxAnXdsl2LineSrvcConfProfile
The value of this object identifies the row in the xDSL2
Line Service Profile Table, (zxAnZxAnXdsl2ServiceConfProfTable),
which applies for this line.

This object MUST be maintained in a persistent mann…
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.2
zxAnXdsl2LineDpboConfProfile
The value of this object identifies the row in the xDSL2
Line Dpbo Profile Table, (zxAnZxAnXdsl2DpboConfProfTable),
which applies for this line.

This object MUST be maintained in a persistent manner.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.3
zxAnXdsl2LineUpboConfProfile
The value of this object identifies the row in the xDSL2
Line Upbo Profile Table, (zxAnXdsl2UpboConfProfTable),
which applies for this line.

This object MUST be maintained in a persistent manner.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.4
zxAnXdsl2LineAlmThreshPrfName
The value of this object identifies the row in the xDSL2
Line
Alarm Configuration Profile Table,
(zxAnXdsl2LineAlarmConfProfTable), which applies to this line.

This object MUST be maintained in a persiste…
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.5
zxAnXdsl2LineCmndConfPmsf
Power management state forced (PMSF). Defines the line
states to be forced by the near-end xTU on this line.
The various possible values are:
l3toL0 (0),
l0toL2 (2),
l0orL2toL3 (3).

This object …
VDSL2-LINE-TC-MIBXdsl2ConfPmsForcer/w
Textual Convention: VDSL2-LINE-TC-MIBXdsl2ConfPmsForce Enumeration
Type Values:
0l3toL0
2l0toL2
3l0orL2toL3
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.6
zxAnXdsl2LineCmndConfLdsf
Loop diagnostics mode forced (LDSF). Defines whether the
line
should be forced into the loop diagnostics mode by the
near-end xTU on this line or only be responsive to loop
diagnostics initiated by the far-end xTU.
…
VDSL2-LINE-TC-MIBXdsl2LineLdsfr/w
Textual Convention: VDSL2-LINE-TC-MIBXdsl2LineLdsf Enumeration
Type Values:
0inhibit
1force
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.7
zxAnXdsl2LineCmndConfLdsfFailReason
The status of the recent occasion the Loop diagnostics mode
forced (LDSF) was issued for the associated line. Possible
values are:
none (1) - The default value in case LDSF was never
requ…
VDSL2-LINE-TC-MIBXdsl2LdsfResult
Textual Convention: VDSL2-LINE-TC-MIBXdsl2LdsfResult Enumeration
Type Values:
1none
2success
3inProgress
4unsupported
5cannotRun
6aborted
7failed
8illegalMode
9adminUp
10tableFull
11noResources
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.8
zxAnXdsl2LineCmndAutomodeColdStart
Automode cold start forced. This parameter is defined
in order to improve testing of the performance of xTUs
supporting automode when it is enabled in the MIB.
Change the value of this parameter to 'true' indicates
a c…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.9
zxAnXdsl2LineStatusXtuTransSys
The xTU Transmission System (xTS) in use.
It is coded in a bit-map representation with one bit set to
'1' (the selected coding for the DSL line). This
parameter
may be derived from the handshaking procedures defined in…
ZxAnXdsl2TransmissionModeType
Textual Convention: ZxAnXdsl2TransmissionModeType Bits
Type Values:
0ansit1413
1etsi
2g9921PotsNonOverlapped
3g9921PotsOverlapped
4g9921IsdnNonOverlapped
5g9921isdnOverlapped
6g9921tcmIsdnNonOverlapped
7g9921tcmIsdnOverlapped
8g9922potsNonOverlapeed
9g9922potsOverlapped
10g9922tcmIsdnNonOverlapped
11g9922tcmIsdnOverlapped
12g9921tcmIsdnSymmetric
13reserved1
14reserved2
15reserved3
16reserved4
17reserved5
18g9923PotsNonOverlapped
19g9923PotsOverlapped
20g9923IsdnNonOverlapped
21g9923isdnOverlapped
22reserved6
23reserved7
24g9924potsNonOverlapeed
25g9924potsOverlapped
26reserved8
27reserved9
28g9923AnnexIAllDigNonOverlapped
29g9923AnnexIAllDigOverlapped
30g9923AnnexJAllDigNonOverlapped
31g9923AnnexJAllDigOverlapped
32g9924AnnexIAllDigNonOverlapped
33g9924AnnexIAllDigOverlapped
34g9923AnnexLMode1NonOverlapped
35g9923AnnexLMode2NonOverlapped
36g9923AnnexLMode3Overlapped
37g9923AnnexLMode4Overlapped
38g9923AnnexMPotsNonOverlapped
39g9923AnnexMPotsOverlapped
40g9925PotsNonOverlapped
41g9925PotsOverlapped
42g9925IsdnNonOverlapped
43g9925isdnOverlapped
44reserved10
45reserved11
46g9925AnnexIAllDigNonOverlapped
47g9925AnnexIAllDigOverlapped
48g9925AnnexJAllDigNonOverlapped
49g9925AnnexJAllDigOverlapped
50g9925AnnexMPotsNonOverlapped
51g9925AnnexMPotsOverlapped
52reserved12
53g9932AnnexAProtection
54g9932AnnexBProtection
55g9932AnnexCProtection
56g9932AnnexA
57g9932AnnexB
58g9932AnnexC
59reserved16
60reserved17
61g9935AnnexA
62g9935AnnexB
63g9935AnnexC
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.10
zxAnXdsl2LineStatusPwrMngState
The current power management state. One of four possible
power management states:
L0 - Synchronized and full transmission (i.e., Showtime),
L1 - Low Power with reduced net data rate (G.992.2 only),
L2 - Low Po…
VDSL2-LINE-TC-MIBXdsl2PowerMngState
Textual Convention: VDSL2-LINE-TC-MIBXdsl2PowerMngState Enumeration
Type Values:
1l0
2l1
3l2
4l3
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.11
zxAnXdsl2LineStatusInitResult
Indicates the result of the last full initialization
performed on the line. It is an enumeration type with the following
values: noFail(0), configError(1), configNotFeasible(2),
commFail(3), noPeerAtu(4), otherCause(5),…
Enumeration
Enumerated Values:
0noFail
1configError
2configNotFeasible
3commFail
4noPeerAtu
5otherCause
254protocolInitFailure
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.12
zxAnXdsl2LineStatusLastStateDs
The last successful transmitted initialization state in
the downstream direction in the last full initialization
performed on the line.
VDSL2-LINE-TC-MIBXdsl2LastTransmittedState
Textual Convention: VDSL2-LINE-TC-MIBXdsl2LastTransmittedState Enumeration
Type Values:
0atucG9941
1atucQuiet1
2atucComb1
3atucQuiet2
4atucComb2
5atucIcomb1
6atucLineprob
7atucQuiet3
8atucComb3
9atucIComb2
10atucMsgfmt
11atucMsgpcb
12atucQuiet4
13atucReverb1
14atucTref1
15atucReverb2
16atucEct
17atucReverb3
18atucTref2
19atucReverb4
20atucSegue1
21atucMsg1
22atucReverb5
23atucSegue2
24atucMedley
25atucExchmarker
26atucMsg2
27atucReverb6
28atucSegue3
29atucParams
30atucReverb7
31atucSegue4
32atucShowtime
100aturG9941
101aturQuiet1
102aturComb1
103aturQuiet2
104aturComb2
105aturIcomb1
106aturLineprob
107aturQuiet3
108aturComb3
109aturIcomb2
110aturMsgfmt
111aturMsgpcb
112aturReverb1
113aturQuiet4
114aturReverb2
115aturQuiet5
116aturReverb3
117aturEct
118aturReverb4
119aturSegue1
120aturReverb5
121aturSegue2
122aturMsg1
123aturMedley
124aturExchmarker
125aturMsg2
126aturReverb6
127aturSegue3
128aturParams
129aturReverb7
130aturSegue4
131aturShowtime
200vtucG9941
201vtucQuiet1
202vtucChDiscov1
203vtucSynchro1
204vtucPilot1
205vtucQuiet2
206vtucPeriodic1
207vtucSynchro2
208vtucChDiscov2
209vtucSynchro3
210vtucTraining1
211vtucSynchro4
212vtucPilot2
213vtucTeq
214vtucEct
215vtucPilot3
216vtucPeriodic2
217vtucTraining2
218vtucSynchro5
219vtucMedley
220vtucSynchro6
221vtucShowtime
300vturG9941
301vturQuiet1
302vturChDiscov1
303vturSynchro1
304vturLineprobe
305vturPeriodic1
306vturSynchro2
307vturChDiscov2
308vturSynchro3
309vturQuiet2
310vturTraining1
311vturSynchro4
312vturTeq
313vturQuiet3
314vturEct
315vturPeriodic2
316vturTraining2
317vturSynchro5
318vturMedley
319vturSynchro6
320vturShowtime
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.13
zxAnXdsl2LineStatusLastStateUs
The last successful transmitted initialization state in the
upstream direction in the last full initialization performed
on the line.
VDSL2-LINE-TC-MIBXdsl2LastTransmittedState
Textual Convention: VDSL2-LINE-TC-MIBXdsl2LastTransmittedState Enumeration
Type Values:
0atucG9941
1atucQuiet1
2atucComb1
3atucQuiet2
4atucComb2
5atucIcomb1
6atucLineprob
7atucQuiet3
8atucComb3
9atucIComb2
10atucMsgfmt
11atucMsgpcb
12atucQuiet4
13atucReverb1
14atucTref1
15atucReverb2
16atucEct
17atucReverb3
18atucTref2
19atucReverb4
20atucSegue1
21atucMsg1
22atucReverb5
23atucSegue2
24atucMedley
25atucExchmarker
26atucMsg2
27atucReverb6
28atucSegue3
29atucParams
30atucReverb7
31atucSegue4
32atucShowtime
100aturG9941
101aturQuiet1
102aturComb1
103aturQuiet2
104aturComb2
105aturIcomb1
106aturLineprob
107aturQuiet3
108aturComb3
109aturIcomb2
110aturMsgfmt
111aturMsgpcb
112aturReverb1
113aturQuiet4
114aturReverb2
115aturQuiet5
116aturReverb3
117aturEct
118aturReverb4
119aturSegue1
120aturReverb5
121aturSegue2
122aturMsg1
123aturMedley
124aturExchmarker
125aturMsg2
126aturReverb6
127aturSegue3
128aturParams
129aturReverb7
130aturSegue4
131aturShowtime
200vtucG9941
201vtucQuiet1
202vtucChDiscov1
203vtucSynchro1
204vtucPilot1
205vtucQuiet2
206vtucPeriodic1
207vtucSynchro2
208vtucChDiscov2
209vtucSynchro3
210vtucTraining1
211vtucSynchro4
212vtucPilot2
213vtucTeq
214vtucEct
215vtucPilot3
216vtucPeriodic2
217vtucTraining2
218vtucSynchro5
219vtucMedley
220vtucSynchro6
221vtucShowtime
300vturG9941
301vturQuiet1
302vturChDiscov1
303vturSynchro1
304vturLineprobe
305vturPeriodic1
306vturSynchro2
307vturChDiscov2
308vturSynchro3
309vturQuiet2
310vturTraining1
311vturSynchro4
312vturTeq
313vturQuiet3
314vturEct
315vturPeriodic2
316vturTraining2
317vturSynchro5
318vturMedley
319vturSynchro6
320vturShowtime
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.14
zxAnXdsl2LineStatusXtur
Indicates current state (existing failures) of the xTU-R.
This is a bit-map of possible conditions.

This BITS structure can report the following failures:

noDefect (0) - This bi…
Bits
Enumerated Values:
0noDefect
1lossOfFraming
2lossOfSignal
3lossOfPower
4unused
5lossOfSignalQuality
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.15
zxAnXdsl2LineStatusXtuc
Indicates current state (existing failures) of the xTU-C.
This is a bit-map of possible conditions.

This BITS structure can report the following failures:

noDefect (0) - This bi…
Bits
Enumerated Values:
0noDefect
1lossOfFraming
2lossOfSignal
3lossOfPower
4initFailure
5lossOfSignalQuality
6lossOfLink
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.16
zxAnXdsl2LineStatusAttainableRateDs
Maximum Attainable Data Rate Downstream.
The maximum downstream net data rate currently attainable by
the xTU-C transmitter and the xTU-R receiver, coded in
bit/s.
kbpsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.17
zxAnXdsl2LineStatusAttainableRateUs
Maximum Attainable Data Rate Upstream.
The maximum upstream net data rate currently attainable by the
xTU-R transmitter and the xTU-C receiver, coded in bit/s.
kbpsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.18
zxAnXdsl2LineStatusActPsdDs
Actual Power Spectrum Density (PSD) Downstream. The average
downstream transmit PSD over the sub-carriers used for
downstream. It ranges from -900 to 0 units of 0.1 dB
(Physical values are -90 to 0 dBm/Hz).
A value of…
0.1 dBm/HzInteger32
Constraints:
range: -900-0
range: 2147483647-2147483647
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.19
zxAnXdsl2LineStatusActPsdUs
Actual Power Spectrum Density (PSD) Upstream. The average
upstream transmit PSD over the sub-carriers used for upstream.
It ranges from -900 to 0 units of 0.1 dB (Physical values
are -90 to 0 dBm/Hz).
A value of 0x7FFF…
0.1 dBm/HzInteger32
Constraints:
range: -900-0
range: 2147483647-2147483647
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.20
zxAnXdsl2LineStatusActAtpDs
Actual Aggregate Transmit Power Downstream. The total
amount
of transmit power delivered by the xTU-C at the U-C reference
point, at the instant of measurement. It ranges from -310 to
310 units of 0.1 dB (Physical …
0.1 dBmInteger32
Constraints:
range: -310-310
range: 2147483647-2147483647
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.21
zxAnXdsl2LineStatusActAtpUs
Actual Aggregate Transmit Power Upstream. The total amount
of
transmit power delivered by the xTU-R at the U-R
reference point, at the instant of measurement. It ranges
from -310 to 310 units of 0.1 dB (Physical va…
0.1 dBmInteger32
Constraints:
range: -310-310
range: 2147483647-2147483647
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.22
zxAnXdsl2LineStatusActStandardPrf
Actual Standard Profile used by this connection.
Enumeration
Enumerated Values:
1g993_2_8A
2g993_2_8B
3g993_2_8C
4g993_2_8D
5g993_2_12A
6g993_2_12B
7g993_2_17A
8g993_2_30A
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.23
zxAnXdsl2LineDataPathType
Data path type of this line.
Enumerationr/w
Enumerated Values:
1atm
2ptm
3stm
4auto
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.24
zxAnXdsl2LineStatusActLimitMask
The Limit PSD mask and band plan in use.
The configuration parameter xdsl2LConfProfLimitMask defines
the set of allowed G.993.2 limit PSD masks.
This parameter indicates the limit PSD mask in use on
this line.
Enumeration
Enumerated Values:
0annexA_D32
8annexA_D64
16annexA_D128
32annexB_B7_1_997_M1c_A_7
33annexB_B7_2_997_M1x_M_8
34annexB_B7_3_997_M1x_M
35annexB_B7_4_997_M2x_M_8
36annexB_B7_5_997_M2x_A
37annexB_B7_6_997_M2x_M
38annexB_B7_7_HPE17_M1_NUS0
39annexB_B7_8_HPE30_M1_NUS0
40annexB_B7_9_997E17_M2x_NUS0
41annexB_B7_10_997E30_M2x_NUS0
64annexB_B8_1_998_M1_x_A
65annexB_B8_2_998_M1x_B
66annexB_B8_3_998_M1x_NUS0
67annexB_B8_4_998_M2x_A
68annexB_B8_5_998_M2x_M
69annexB_B8_6_998_M2x_B
70annexB_B8_7_998_M2x_NUS0
71annexB_B8_8_998E17_M2x_NUS0
72annexB_B8_9_998E17_M2x_NUS0_M
73annexB_B8_10_998ADE17_M2x_NUS0_M
74annexB_B8_11_998ADE17_M2x_A
75annexB_B8_12_998ADE17_M2x_B
76annexB_B8_13_998E30_M2x_NUS0
77annexB_B8_14_998E30_M2x_NUS0_M
78annexB_B8_15_998ADE30_M2x_NUS0_M
79annexB_B8_16_998ADE30_M2x_NUS0_A
96annexC_Pots
97annexC_Tcm_Isdn
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.25
zxAnXdsl2LineStatusActSnrModeDs
This parameter indicates if the transmitter
referred virtual noise is active on the line in the
downstream direction.
The configuration parameter xdsl2LConfProfSnrModeDs
is used to configure referred virtual noise.
VDSL2-LINE-TC-MIBXdsl2LineSnrMode
Textual Convention: VDSL2-LINE-TC-MIBXdsl2LineSnrMode Enumeration
Type Values:
1virtualNoiseDisabled
2virtualNoiseEnabled
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.26
zxAnXdsl2LineStatusActSnrModeUs
This parameter indicates if the transmitter
referred virtual noise is active on the line in the
upstream direction.
The configuration parameter xdsl2LConfProfSnrModeUs is
used to configure referred virtual noise.
VDSL2-LINE-TC-MIBXdsl2LineSnrMode
Textual Convention: VDSL2-LINE-TC-MIBXdsl2LineSnrMode Enumeration
Type Values:
1virtualNoiseDisabled
2virtualNoiseEnabled
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.27
zxAnXdsl2LineStatusElectricalLength
(UPBOKLE)
This parameter contains the estimated electrical length
expressed in dB at 1 MHz, kl0. This is the final electrical
length that would have been sent from the VTU-O to VTU-R if
the electrical length was not for…
0.1 dBUnsigned32
Constraints:
range: 0-1280
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.28
zxAnXdsl2LineStatusTrellisDs
This parameter reports whether trellis coding
is in use in the downstream direction.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.29
zxAnXdsl2LineStatusTrellisUs
This parameter reports whether trellis coding
is in use in the upstream direction.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.30
zxAnXdsl2LineStatusActualCe
(ACTUALCE)
This parameter reports the cyclic extension
used on the line. It is coded as an unsigned integer from
2 to 16 in units of N/32 samples, where 2N is the IDFT size.
N/32 samplesUnsigned32
Constraints:
range: 2-16
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.31
zxAnXdsl2LineStatusOperState
The operational status of the line.
Enumeration
Enumerated Values:
1idle
2handshake
3training
4testing
5showtime
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.32
zxAnXdsl2LineStatusActDataPathType
Actual data path type of this line.
Enumeration
Enumerated Values:
1atm
2ptm
3stm
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.33
zxAnXdsl2LineCmndPMReset
Reset the performance monitoring results of single line.

currentPerf(0) - reset the current performance monitoring results.
it will affect only current real-time PM object,
…
Bitsr/w
Enumerated Values:
0currentPerf
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.34
zxAnXdsl2LineExtConfProfile
The value of this object identifies the row in the xDSL2
Line Ext Profile Table, (zxAnXdsl2LnExtConfPrfTable),
which applies for this line.

This object MUST be maintained in a persistent manner.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.35
zxAnXdsl2LineStatusLnAttenDs
Downstream line Attenuation.
When referring to a band in the downstream direction, it is the
measured difference in the total power transmitted by the xTU-C
and the total power received by the xTU-R over all sub-carrier…
0.1 dBInteger32
Constraints:
range: 0-1270
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.36
zxAnXdsl2LineStatusLnAttenUs
Upstream line Attenuation.
When referring to a band in the downstream direction, it is the
measured difference in the total power transmitted by the xTU-C
and the total power received by the xTU-R over all sub-carriers
…
0.1 dBInteger32
Constraints:
range: 0-1270
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.37
zxAnXdsl2LineStatusSigAttenDs
Downstream signal Attenuation.
When referring to a band in the downstream direction, it is the
measured difference in the total power transmitted by the xTU-C
and the total power received by the xTU-R over all sub-carri…
0.1 dBInteger32
Constraints:
range: 0-1270
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.38
zxAnXdsl2LineStatusSigAttenUs
Upstream signal Attenuation.
When referring to a band in the downstream direction, it is the
measured difference in the total power transmitted by the xTU-C
and the total power received by the xTU-R over all sub-carrier…
0.1 dBInteger32
Constraints:
range: 0-1270
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.39
zxAnXdsl2LineStatusSnrMarginDs
SNR Margin is the maximum increase in dB of the noise power
received at the XTU (xTU-R for a band in the downstream direction
and xTU-C for a band in the upstream direction), such that
the BER requirements are met for a…
0.1 dBInteger32
Constraints:
range: -640-630
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.40
zxAnXdsl2LineStatusSnrMarginUs
SNR Margin is the maximum increase in dB of the noise power
received at the XTU (xTU-R for a band in the downstream direction
and xTU-C for a band in the upstream direction), such that
the BER requirements are met for a…
0.1 dBInteger32
Constraints:
range: -640-630
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.41
zxAnXdsl2LineLofStatsDs
Downstream count of times that there was LOF.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.42
zxAnXdsl2LineLofStatsUs
Upstream count of times that there was LOF.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.43
zxAnXdsl2LineLolStatsDs
Downstream count of times that there was LOL.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.44
zxAnXdsl2LineLolStatsUs
Upstream count of times that there was LOF.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.45
zxAnXdsl2LineLprStatsDs
Downstream count of times that there was LPR.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.46
zxAnXdsl2LineLprStatsUs
Upstream count of times that there was LPR.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.2.1.1.47

zxAnXdsl2BaseConfProfTable

table
.1.3.6.1.4.1.3902.1015.1001.1.3.1 · 1 row entry · 60 columns
Open in standard view 
The table zxAnXdsl2BaseConfProfTable contains VDSL2/ADSL/
ADSL2 and ADSL2+ basic configuration profile.
Entries in this table MUST be maintained in a
persistent manner.
zxAnXdsl2BaseConfProfEntry entry .1.3.6.1.4.1.3902.1015.1001.1.3.1.1
The table zxAnXdsl2BaseConfProfTable contains VDSL2/ADSL/
ADSL2 and ADSL2+ basic configuration profile.

A default profile with an index of 'DEFVAL' will
always exist and its parameters will be set to vendor…
Indexes
zxAnXdsl2BaseConfProfileName
Column Syntax OID
zxAnXdsl2BaseConfProfileName
This object identifies a row in this table.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.1
zxAnXdsl2LConfProfXtuTransSysEna
xTU Transmission System Enabling (xTSE). A list of the
different coding types enabled in this profile. It is coded
in a bit-map representation with 1 or more bits set. A bit
set to '1' means that the xTUs may apply …
ZxAnXdsl2TransmissionModeTyper/w
Textual Convention: ZxAnXdsl2TransmissionModeType Bits
Type Values:
0ansit1413
1etsi
2g9921PotsNonOverlapped
3g9921PotsOverlapped
4g9921IsdnNonOverlapped
5g9921isdnOverlapped
6g9921tcmIsdnNonOverlapped
7g9921tcmIsdnOverlapped
8g9922potsNonOverlapeed
9g9922potsOverlapped
10g9922tcmIsdnNonOverlapped
11g9922tcmIsdnOverlapped
12g9921tcmIsdnSymmetric
13reserved1
14reserved2
15reserved3
16reserved4
17reserved5
18g9923PotsNonOverlapped
19g9923PotsOverlapped
20g9923IsdnNonOverlapped
21g9923isdnOverlapped
22reserved6
23reserved7
24g9924potsNonOverlapeed
25g9924potsOverlapped
26reserved8
27reserved9
28g9923AnnexIAllDigNonOverlapped
29g9923AnnexIAllDigOverlapped
30g9923AnnexJAllDigNonOverlapped
31g9923AnnexJAllDigOverlapped
32g9924AnnexIAllDigNonOverlapped
33g9924AnnexIAllDigOverlapped
34g9923AnnexLMode1NonOverlapped
35g9923AnnexLMode2NonOverlapped
36g9923AnnexLMode3Overlapped
37g9923AnnexLMode4Overlapped
38g9923AnnexMPotsNonOverlapped
39g9923AnnexMPotsOverlapped
40g9925PotsNonOverlapped
41g9925PotsOverlapped
42g9925IsdnNonOverlapped
43g9925isdnOverlapped
44reserved10
45reserved11
46g9925AnnexIAllDigNonOverlapped
47g9925AnnexIAllDigOverlapped
48g9925AnnexJAllDigNonOverlapped
49g9925AnnexJAllDigOverlapped
50g9925AnnexMPotsNonOverlapped
51g9925AnnexMPotsOverlapped
52reserved12
53g9932AnnexAProtection
54g9932AnnexBProtection
55g9932AnnexCProtection
56g9932AnnexA
57g9932AnnexB
58g9932AnnexC
59reserved16
60reserved17
61g9935AnnexA
62g9935AnnexB
63g9935AnnexC
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.2
zxAnXdsl2LConfProfStandardProfile
The set of profiles which allows the transceivers to support
a subset of allowed settings, as defined in G.993.2 Recommendation.
VDSL2-LINE-TC-MIBXdsl2LineProfilesr/w
Textual Convention: VDSL2-LINE-TC-MIBXdsl2LineProfiles Bits
Type Values:
0profile8a
1profile8b
2profile8c
3profile8d
4profile12a
5profile12b
6profile17a
7profile30a
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.3
zxAnXdsl2LConfProfLimitMask
Limit Mask of the line.
Bitsr/w
Enumerated Values:
0annexA_D32
8annexA_D64
16annexA_D128
32annexB_B7_1_997_M1c_A_7
33annexB_B7_2_997_M1x_M_8
34annexB_B7_3_997_M1x_M
35annexB_B7_4_997_M2x_M_8
36annexB_B7_5_997_M2x_A
37annexB_B7_6_997_M2x_M
38annexB_B7_7_HPE17_M1_NUS0
39annexB_B7_8_HPE30_M1_NUS0
40annexB_B7_9_997E17_M2x_NUS0
41annexB_B7_10_997E30_M2x_NUS0
64annexB_B8_1_998_M1_x_A
65annexB_B8_2_998_M1x_B
66annexB_B8_3_998_M1x_NUS0
67annexB_B8_4_998_M2x_A
68annexB_B8_5_998_M2x_M
69annexB_B8_6_998_M2x_B
70annexB_B8_7_998_M2x_NUS0
71annexB_B8_8_998E17_M2x_NUS0
72annexB_B8_9_998E17_M2x_NUS0_M
73annexB_B8_10_998ADE17_M2x_NUS0_M
74annexB_B8_11_998ADE17_M2x_A
75annexB_B8_12_998ADE17_M2x_B
76annexB_B8_13_998E30_M2x_NUS0
77annexB_B8_14_998E30_M2x_NUS0_M
78annexB_B8_15_998ADE30_M2x_NUS0_M
79annexB_B8_16_998ADE30_M2x_NUS0_A
96annexC_Pots
97annexC_Tcm_Isdn
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.4
zxAnXdsl2LConfProfUs0Disable
Enable or disable the use of US0.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.5
zxAnXdsl2LConfProfUs0Mask
The set of profiles which allows the transceivers to support
a subset of allowed settings, as defined in G.993.2 Recommendation.
VDSL2-LINE-TC-MIBXdsl2LineUs0Maskr/w
Textual Convention: VDSL2-LINE-TC-MIBXdsl2LineUs0Mask Bits
Type Values:
0eu32
1eu36
2eu40
3eu44
4eu48
5eu52
6eu56
7eu60
8eu64
9eu128
10reserved1
11reserved2
12reserved3
13reserved4
14reserved5
15reserved6
16adlu32
17adlu36
18adlu40
19adlu44
20adlu48
21adlu52
22adlu56
23adlu60
24adlu64
25adlu128
26reserved7
27reserved8
28reserved9
29reserved10
30reserved11
31reserved12
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.6
zxAnXdsl2LConfProfRfiBandsDs
RfiBands configured in the downstream.
VDSL2-LINE-TC-MIBXdsl2RfiBandsr/w
Textual Convention: VDSL2-LINE-TC-MIBXdsl2RfiBands OctetString
Type Constraints:
range: 0..64
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.7
zxAnXdsl2LConfProfVdsl2CarMask
(VDSL2-CARMASK).
VDSL2 specific Sub-carriers mask. This configuration
parameter defines the restrictions, additional to the band
plan, to determine the set of subcarriers allowed for
transmission in both upstream and d…
VDSL2-LINE-TC-MIBXdsl2CarMaskr/w
Textual Convention: VDSL2-LINE-TC-MIBXdsl2CarMask OctetString
Type Constraints:
range: 0..128
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.8
zxAnXdsl2LConfProfVdslMaxNomAtpDs
(MAXNOMATPds).
The maximum nominal aggregate transmit power in the
downstream direction during initialization and Showtime. It
ranges from 0 to 255 units of 0.1 dBm (physical values are 0
to 25.5 dBm).
0.1 dBmUnsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.9
zxAnXdsl2LConfProfVdslMaxNomAtpUs
(MAXNOMATPus).
The maximum nominal aggregate transmit power in the upstream
direction during initialization and Showtime. It ranges from
0 to 255 units of 0.1 dBm (physical values are 0 to 25.5
dBm).
0.1 dBmUnsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.10
zxAnXdsl2LConfProfVdslMaxNomPsdDs
(MAXNOMPSDds).
The maximum nominal transmit PSD in the downstream
direction during initialization and Showtime. It ranges from
-600 to -300 units of 0.1 dBm/Hz. (physical values are -60 to
-30 dBm/Hz).
0.1 dBm/HzInteger32r/w
Constraints:
range: -600--300
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.11
zxAnXdsl2LConfProfVdslMaxNomPsdUs
(MAXNOMPSDus).
The maximum nominal transmit PSD in the upstream direction
during initialization and Showtime. It ranges from -600 to
-300 units of 0.1 dBm/Hz. (physical values are -60 to
-30 dBm/Hz).
0.1 dBm/HzInteger32r/w
Constraints:
range: -600--300
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.12
zxAnXdsl2LConfProfVdslMaxAggRxPwrUs
(MAXRXPWRus).
The maximum upstream aggregate receive power over the relevant
set of sub-carriers. The xTU-C should verify that the
upstream power cutback is such that this maximum aggregate
receive power value is honor…
0.1 dBmInteger32r/w
Constraints:
range: -255-255
range: 2147483647-2147483647
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.13
zxAnXdsl2LConfProfAdslMaxNomAtpDs
(MAXNOMATPds).
The maximum nominal aggregate transmit power in the
downstream direction during initialization and Showtime. It
ranges from 0 to 255 units of 0.1 dBm (physical values are 0
to 25.5 dBm).
0.1 dBmUnsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.14
zxAnXdsl2LConfProfAdslMaxNomAtpUs
(MAXNOMATPus).
The maximum nominal aggregate transmit power in the upstream
direction during initialization and Showtime. It ranges from
0 to 255 units of 0.1 dBm (physical values are 0 to 25.5
dBm).
0.1 dBmUnsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.15
zxAnXdsl2LConfProfAdslMaxNomPsdDs
(MAXNOMPSDds).
The maximum nominal transmit PSD in the downstream
direction during initialization and Showtime. It ranges from
-600 to -300 units of 0.1 dBm/Hz. (physical values are -60 to
-30 dBm/Hz).
0.1 dBm/HzInteger32r/w
Constraints:
range: -600--300
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.16
zxAnXdsl2LConfProfAdslMaxNomPsdUs
(MAXNOMPSDus).
The maximum nominal transmit PSD in the upstream direction
during initialization and Showtime. It ranges from -600 to
-300 units of 0.1 dBm/Hz. (physical values are -60 to
-30 dBm/Hz).
0.1 dBm/HzInteger32r/w
Constraints:
range: -600--300
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.17
zxAnXdsl2LConfProfAdslMaxAggRxPwrUs
(MAXRXPWRus).
The maximum upstream aggregate receive power over the relevant
set of sub-carriers. The xTU-C should verify that the
upstream power cutback is such that this maximum aggregate
receive power value is honor…
0.1 dBmInteger32r/w
Constraints:
range: -255-255
range: 2147483647-2147483647
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.18
zxAnXdsl2LConfProfScMaskDs
Sub-carriers mask. A bitmap of 4096 bits that allows
masking
up to 4096 downstream sub-carriers, depending on NSCds. If
bit i (0 <= i < NSCds) is set to '1', the
respective
downstream sub-carrier i is masked, and …
VDSL2-LINE-TC-MIBXdsl2ScMaskDsr/w
Textual Convention: VDSL2-LINE-TC-MIBXdsl2ScMaskDs OctetString
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.19
zxAnXdsl2LConfProfScMaskUs
Sub-carriers mask. A bitmap of 4096 bits that allows
masking
up to 4096 downstream sub-carriers, depending on NSCds. If
bit i (0 <= i < NSCus) is set to '1', the
respective
upstream sub-carrier i is masked, and if…
VDSL2-LINE-TC-MIBXdsl2ScMaskUsr/w
Textual Convention: VDSL2-LINE-TC-MIBXdsl2ScMaskUs OctetString
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.20
zxAnXdsl2LConfProfRaUsNrmDs
The Downstream Up-Shift Noise Margin value, to be used when
zxAnXdsl2LConfProfRaModeDs is set to dynamicRa. If the downstream
noise margin is above this value and stays above it for
more than the time specified by the …
0.1 dBUnsigned32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.21
zxAnXdsl2LConfProfRaUsNrmUs
The Upstream Up-Shift Noise Margin value, to be used when
zxAnXdsl2LConfProfRaModeUs is set to dynamicRa. If the upstream
noise margin is above this value and stays above it for more
than the time specified by the zxAn…
0.1 dBUnsigned32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.22
zxAnXdsl2LConfProfRaUsTimeDs
The Downstream Up-Shift Time Interval, to be used when
zxAnXdsl2LConfProfRaModeDs is set to dynamicRa. The interval of
time that the downstream noise margin should stay above the
Downstream Up-shift Noise Margin before…
secondsUnsigned32r/w
Constraints:
range: 0-16383
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.23
zxAnXdsl2LConfProfRaUsTimeUs
The Upstream Up-Shift Time Interval, to be used when
zxAnXdsl2LConfProfRaModeUs is set to dynamicRa. The interval of
time the upstream noise margin should stay above the
Upstream Up-shift Noise Margin before the xTU-C …
secondsUnsigned32r/w
Constraints:
range: 0-16383
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.24
zxAnXdsl2LConfProfRaDsNrmsDs
The Downstream Down-Shift Noise Margin value, to be used
when
zxAnXdsl2LConfProfRaModeDs is set to dynamicRa. If the downstream
noise margin is below this value and stays below that for more
than the time specified …
0.1 dBUnsigned32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.25
zxAnXdsl2LConfProfRaDsNrmsUs
The Upstream Downshift Noise Margin value, to be used when
zxAnXdsl2LConfProfRaModeUs is set to dynamicRa. If the upstream
noise margin is below this value and stays below that for more
than the time specified by the z…
0.1 dBUnsigned32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.26
zxAnXdsl2LConfProfRaDsTimeDs
The Downstream Downshift Time Interval, to be used when
zxAnXdsl2LConfProfRaModeDs is set to dynamicRa. The interval of
time the downstream noise margin should stay below the
Downstream Down-shift Noise Margin before t…
secondsUnsigned32r/w
Constraints:
range: 0-16383
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.27
zxAnXdsl2LConfProfRaDsTimeUs
The Upstream Down-Shift Time Interval, to be used when
zxAnXdsl2LConfProfRaModeUs is set to dynamicRa. The interval of
time the upstream noise margin should stay below the Upstream
Down-shift Noise Margin before the xT…
secondsUnsigned32r/w
Constraints:
range: 0-16383
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.28
zxAnXdsl2LConfProfMsgMinUs
Minimum Overhead Rate Upstream. Defines the minimum rate of
the message-based overhead that shall be maintained by the xTU
in upstream direction. Expressed in bits per second and
ranges from 4000 to 63000 bps.
kbpsUnsigned32r/w
Constraints:
range: 4-63
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.29
zxAnXdsl2LConfProfMsgMinDs
Minimum Overhead Rate Downstream. Defines the minimum rate
of
the message-based overhead that shall be maintained by the xTU
in downstream direction. Expressed in bits per second and
ranges from 4000 to 63000 bps.
kbpsUnsigned32r/w
Constraints:
range: 4-63
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.30
zxAnXdsl2LConfProfPmMode
Power management state Enabling (PMMode). Defines the power
states the xTU-C or xTU-R may autonomously transition to on
this line.
The various bit positions are: allowTransitionsToIdle (0) and
allowTransitionsToLowPowe…
VDSL2-LINE-TC-MIBXdsl2LinePmModer/w
Textual Convention: VDSL2-LINE-TC-MIBXdsl2LinePmMode Bits
Type Values:
0allowTransitionsToIdle
1allowTransitionsToLowPower
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.31
zxAnXdsl2LConfProfL0Time
The minimum time (in seconds) between an Exit from the L2
state and the next Entry into the L2 state (L0-TIME).
It ranges from 0 to 255 seconds.
secondsUnsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.32
zxAnXdsl2LConfProfL2Time
The minimum time (in seconds) between an Entry into the
L2 state and the first Power Trim in the L2 state and between
two consecutive Power Trims in the L2 State (L2-TIME).
It ranges from 0 to 255 seconds.
secondsUnsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.33
zxAnXdsl2LConfProfL2Atpr
The maximum aggregate transmit power reduction (in dB) that
can be performed at transition of L0 to L2 state or through a
single Power Trim in the L2 state (L2-ATPR).
It ranges from 0 dB to 31 dB.
dBUnsigned32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.34
zxAnXdsl2LConfProfL2Atprt
The total maximum aggregate transmit power reduction
(in dB) that can be performed in an L2 state. This is the
sum of all reductions of L2 Request (i.e., at transition of
L0 to L2 state) and Power Trims (L2-ATPRT).
dBUnsigned32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.35
zxAnXdsl2LConfProfPsdMaskDs
(PSDMASKds).
The downstream PSD mask applicable at the U-C2 reference
point.
This parameter is used only for G.992.5 and it may impose PSD
restrictions (breakpoints) in addition to the Limit PSD mask
defined in G.992.5.…
VDSL2-LINE-TC-MIBXdsl2PsdMaskDsr/w
Textual Convention: VDSL2-LINE-TC-MIBXdsl2PsdMaskDs OctetString
Type Constraints:
range: 0..96
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.36
zxAnXdsl2LConfProfPsdMaskUs
(PSDMASKus).
The upstream PSD mask applicable at the U-R2 reference
point.
This parameter is used only for G.992.5 and it may impose PSD
restrictions (breakpoints) in addition to the Limit PSD mask
defined in G.992.5.
T…
VDSL2-LINE-TC-MIBXdsl2PsdMaskUsr/w
Textual Convention: VDSL2-LINE-TC-MIBXdsl2PsdMaskUs OctetString
Type Constraints:
range: 0..48
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.37
zxAnXdsl2LConfProfPsdMaskSelectUs
The selected upstream PSD mask. This parameter is used only
for annexes J and M of G.992.3 and G.992.5, and the same
selection is used for all relevant enabled bits in
zxAnXdsl2LConfProfXtuTransSysEna.
Unsigned32r/w
Constraints:
range: 1-9
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.38
zxAnXdsl2LConfProfTrellisDs
Enabled or disabled the Trellis of downstream.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.39
zxAnXdsl2LConfProfTrellisUs
Enabled or disabled the Trellis of upstream.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.40
zxAnXdsl2LConfProfBitswapDs
Enabled or disabled the Bitswap of downstream.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.41
zxAnXdsl2LConfProfBitswapUs
Enabled or disabled the Bitswap of upstream.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.42
zxAnXdsl2LConfProfRetrainMode
Enabled or disabled the Retrain.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.43
zxAnXdsl2LconfProfSnrModeDs
This parameter enables/disables the transmitter referred virtual
noise in the downstream direction. If set to 2, the virtual noise
is disabled. If set to 1, the virtual noise is enabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.44
zxAnXdsl2LconfProfSnrModeUs
This parameter enables/disables the transmitter referred virtual
noise in the Upstream direction. If set to 2, the virtual noise
is disabled. If set to 1, the virtual noise is enabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.45
zxAnXdsl2LConfProfTxRefVNDs
This configuration parameter defines the downstream transmitter
referred virtual noise (TXREFVNds).
The TXREFVNds shall be specified through a set of breakpoints.
Each breakpoint shall consist of a subcarrier index t…
OctetStringr/w
Constraints:
range: 0-96
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.46
zxAnXdsl2LConfProfTxRefVNUs
This configuration parameter defines the upstream transmitter
referred virtual noise (TXREFVNus). The TXREFVNus shall be
specified through a set of breakpoints. Each breakpoint shall
consist of a subcarrier index t, …
OctetStringr/w
Constraints:
range: 0-48
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.47
zxAnXdsl2Ch1ConfProfMinResDataRateDs
Minimum Reserved Data Rate on Downstream direction. The
minimum reserved net data rate for the bearer channel, coded
in bit/s. This parameter is used only if the Rate Adaptation
Mode in the direction of the bearer cha…
kbpsUnsigned32r/w
Constraints:
range: 0-200000
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.48
zxAnXdsl2Ch1ConfProfMinResDataRateUs
Minimum Reserved Data Rate on Upstream direction. The minimum
reserved net data rate for the bearer channel, coded in
bit/s. This parameter is used only if the Rate Adaptation
Mode in the direction of the bearer chann…
kbpsUnsigned32r/w
Constraints:
range: 0-200000
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.49
zxAnXdsl2Ch1ConfProfMinDataRateLowPwrDs
Minimum Data Rate in Low Power state on Downstream direction.
The minimum net data rate for the bearer channel, coded in
bit/s., during the low power state (L1 in G.992.2, L2 in
G.992.3).
kbpsUnsigned32r/w
Constraints:
range: 0-200000
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.50
zxAnXdsl2Ch1ConfProfMaxBerDs
Maximum Bit Error Ratio on Downstream direction. The maximum
bit error ratio for the bearer channel. The parameter can
take the following values (for 1E-3, 1E-5 or 1E-7):
eminus3 (1),
eminus5 (2),
eminus7 (3)
VDSL2-LINE-TC-MIBXdsl2MaxBerr/w
Textual Convention: VDSL2-LINE-TC-MIBXdsl2MaxBer Enumeration
Type Values:
1eminus3
2eminus5
3eminus7
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.51
zxAnXdsl2Ch1ConfProfMaxBerUs
Maximum Bit Error Ratio on Upstream direction. The maximum
bit error ratio for the bearer channel. The parameter can
take the following values (for 1E-3, 1E-5 or 1E-7):
eminus3 (1),
eminus5 (2),
eminus7 (3)
VDSL2-LINE-TC-MIBXdsl2MaxBerr/w
Textual Convention: VDSL2-LINE-TC-MIBXdsl2MaxBer Enumeration
Type Values:
1eminus3
2eminus5
3eminus7
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.52
zxAnXdsl2Ch1ConfProfImaEnabled
IMA Mode Enable. The parameter enables the IMA operation mode
in the ATM Data Path. Relevant only if the channel is of ATM
Data Path. When in 'enable' state, the ATM data path should
comply with the requirements for …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.53
zxAnXdsl2Ch2ConfProfMinResDataRateDs
Minimum Reserved Data Rate on Downstream direction. The
minimum reserved net data rate for the bearer channel, coded
in bit/s. This parameter is used only if the Rate Adaptation
Mode in the direction of the bearer cha…
kbpsUnsigned32r/w
Constraints:
range: 0-200000
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.54
zxAnXdsl2Ch2ConfProfMinResDataRateUs
Minimum Reserved Data Rate on Upstream direction. The minimum
reserved net data rate for the bearer channel, coded in
bit/s. This parameter is used only if the Rate Adaptation
Mode in the direction of the bearer chann…
kbpsUnsigned32r/w
Constraints:
range: 0-200000
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.55
zxAnXdsl2Ch2ConfProfMinDataRateLowPwrDs
Minimum Data Rate in Low Power state on Downstream direction.
The minimum net data rate for the bearer channel, coded in
bit/s., during the low power state (L1 in G.992.2, L2 in
G.992.3).
kbpsUnsigned32r/w
Constraints:
range: 0-200000
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.56
zxAnXdsl2Ch2ConfProfMaxBerDs
Maximum Bit Error Ratio on Downstream direction. The maximum
bit error ratio for the bearer channel. The parameter can
take the following values (for 1E-3, 1E-5 or 1E-7):
eminus3 (1),
eminus5 (2),
eminus7 (3)
VDSL2-LINE-TC-MIBXdsl2MaxBerr/w
Textual Convention: VDSL2-LINE-TC-MIBXdsl2MaxBer Enumeration
Type Values:
1eminus3
2eminus5
3eminus7
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.57
zxAnXdsl2Ch2ConfProfMaxBerUs
Maximum Bit Error Ratio on Upstream direction. The maximum
bit error ratio for the bearer channel. The parameter can
take the following values (for 1E-3, 1E-5 or 1E-7):
eminus3 (1),
eminus5 (2),
eminus7 (3)
VDSL2-LINE-TC-MIBXdsl2MaxBerr/w
Textual Convention: VDSL2-LINE-TC-MIBXdsl2MaxBer Enumeration
Type Values:
1eminus3
2eminus5
3eminus7
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.58
zxAnXdsl2Ch2ConfProfImaEnabled
IMA Mode Enable. The parameter enables the IMA operation mode
in the ATM Data Path. Relevant only if the channel is of ATM
Data Path. When in 'enable' state, the ATM data path should
comply with the requirements for …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.59
zxAnXdsl2LConfProfRowStatus
This object is used to create a new row or to modify or
delete an existing row in this table.

A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3902.1015.1001.1.3.1.1.64

zxAnXdsl2ServiceConfProfTable

table
.1.3.6.1.4.1.3902.1015.1001.1.3.2 · 1 row entry · 33 columns
Open in standard view 
The table zxAnXdsl2ServiceConfProfTable contains VDSL2/ADSL/
ADSL2 and ADSL2+ Service configuration profile.
Entries in this table MUST be maintained in a
persistent manner.
zxAnXdsl2ServiceConfProfEntry entry .1.3.6.1.4.1.3902.1015.1001.1.3.2.1
The table zxAnXdsl2ServiceConfProfTable contains VDSL2/ADSL/
ADSL2 and ADSL2+ basic configuration profile.

A default profile with an index of 'DEFVAL' will
always exist and its parameters will be set to ven…
Indexes
zxAnXdsl2ServiceConfProfileName
Column Syntax OID
zxAnXdsl2ServiceConfProfileName
This object identifies a row in this table.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.1
zxAnXdsl2LConfProfForceInp
Enable /disable force to use INP.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.2
zxAnXdsl2LConfProfRaModeDs
The mode of operation of a rate-adaptive xTU-C in the transmit
direction. The parameter can take three values:
fixed (1),
raInit (2),
dynamicRa (3).
VDSL2-LINE-TC-MIBXdsl2RaModer/w
Textual Convention: VDSL2-LINE-TC-MIBXdsl2RaMode Enumeration
Type Values:
1manual
2raInit
3dynamicRa
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.3
zxAnXdsl2LConfProfRaModeUs
The mode of operation of a rate-adaptive xTU-R in the transmit
direction. The parameter can take three values:
fixed (1),
raInit (2),
dynamicRa (3).
VDSL2-LINE-TC-MIBXdsl2RaModer/w
Textual Convention: VDSL2-LINE-TC-MIBXdsl2RaMode Enumeration
Type Values:
1manual
2raInit
3dynamicRa
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.4
zxAnXdsl2LConfProfTargetSnrmDs
The minimum Noise Margin the xTU-R receiver shall achieve,

relative to the BER requirement for each of the downstream

bearer channels, to successfully complete initialization.
The target no…
0.1 dBUnsigned32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.5
zxAnXdsl2LConfProfTargetSnrmUs
The minimum Noise Margin the xTU-C receiver shall achieve,

relative to the BER requirement for each of the upstream

bearer channels, to successfully complete initialization.
The target nois…
0.1 dBUnsigned32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.6
zxAnXdsl2LConfProfMaxSnrmDs
The maximum Noise Margin the xTU-R receiver shall try to
sustain. If the Noise Margin is above this level, the xTU-R
shall request that the xTU-C reduce the xTU-C transmit power
to get a noise margin below this limit (…
0.1 dBUnsigned32r/w
Constraints:
range: 0-310
range: 2147483647-2147483647
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.7
zxAnXdsl2LConfProfMaxSnrmUs
The maximum Noise Margin the xTU-C receiver shall try to
sustain. If the Noise Margin is above this level, the xTU-C
shall request that the xTU-R reduce the xTU-R transmit power
to get a noise margin below this limit (…
0.1 dBUnsigned32r/w
Constraints:
range: 0-310
range: 2147483647-2147483647
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.8
zxAnXdsl2LConfProfMinSnrmDs
The minimum Noise Margin the xTU-R receiver shall tolerate.
If the noise margin falls below this level, the xTU-R shall
request that the xTU-C increase the xTU-C transmit power.
If an increase to xTU-C transmit power is…
0.1 dBUnsigned32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.9
zxAnXdsl2LConfProfMinSnrmUs
The minimum Noise Margin the xTU-C receiver shall tolerate.
If the noise margin falls below this level, the xTU-C shall
request that the xTU-R increase the xTU-R transmit power.
If an increase of xTU-R transmit power is…
0.1 dBUnsigned32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.10
zxAnXdsl2ConfProfCh1Enabled
Enable /disable the bearer channel 1.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.11
zxAnXdsl2Ch1ConfChanRaRatioDs
Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #1 when performing rate
adaptation on Downstream. The ratio refers to the available
data rate in excess of the Minimum D…
percentsUnsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.12
zxAnXdsl2Ch1ConfChanRaRatioUs
Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #1 when performing rate
adaptation on Upstream. The ratio refers to the available
data rate in excess of the Minimum Dat…
percentsUnsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.13
zxAnXdsl2Ch1ConfProfMaxDataRateDs
Maximum Data Rate on Downstream direction. The maximum net
data rate for the bearer channel, coded in bit/s.
kbpsUnsigned32r/w
Constraints:
range: 0-200000
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.14
zxAnXdsl2Ch1ConfProfMaxDataRateUs
Maximum Data Rate on Upstream direction. The maximum net
data
rate for the bearer channel, coded in bit/s.
kbpsUnsigned32r/w
Constraints:
range: 0-200000
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.15
zxAnXdsl2Ch1ConfProfMinDataRateDs
Minimum Data Rate on Downstream direction. The minimum net
data rate for the bearer channel, coded in bit/s.
kbpsUnsigned32r/w
Constraints:
range: 0-200000
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.16
zxAnXdsl2Ch1ConfProfMinDataRateUs
Minimum Data Rate on Upstream direction. The minimum net
data
rate for the bearer channel, coded in bit/s.
kbpsUnsigned32r/w
Constraints:
range: 0-200000
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.17
zxAnXdsl2Ch1ConfProfMaxDelayDs
Maximum Interleave Delay on Downstream direction. The
maximum
one-way interleaving delay introduced by the PMS-TC on
Downstream direction. The xTUs shall choose the S (factor)
and D (depth) values such that the act…
millisecondsUnsigned32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.18
zxAnXdsl2Ch1ConfProfMaxDelayUs
Maximum Interleave Delay on Upstream direction. The maximum
one-way interleaving delay introduced by the PMS-TC on
Upstream direction. The xTUs shall choose the S (factor) and
D (depth) values such that the actual one…
millisecondsUnsigned32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.19
zxAnXdsl2Ch1ConfProfMinProtectionDs
Minimum Impulse Noise Protection on Downstream direction.
The
minimum impulse noise protection for the bearer channel,
expressed in symbols. The parameter can take the following
values: noProtection (i.e., INP not r…
symbolsVDSL2-LINE-TC-MIBXdsl2SymbolProtectionr/w
Textual Convention: VDSL2-LINE-TC-MIBXdsl2SymbolProtection Enumeration
Type Values:
1noProtection
2halfSymbol
3singleSymbol
4twoSymbols
5threeSymbols
6fourSymbols
7fiveSymbols
8sixSymbols
9sevenSymbols
10eightSymbols
11nineSymbols
12tenSymbols
13elevenSymbols
14twelveSymbols
15thirteeSymbols
16fourteenSymbols
17fifteenSymbols
18sixteenSymbols
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.20
zxAnXdsl2Ch1ConfProfMinProtectionUs
Minimum Impulse Noise Protection on Upstream direction. The
minimum impulse noise protection for the bearer channel,
expressed in symbols.
symbolsVDSL2-LINE-TC-MIBXdsl2SymbolProtectionr/w
Textual Convention: VDSL2-LINE-TC-MIBXdsl2SymbolProtection Enumeration
Type Values:
1noProtection
2halfSymbol
3singleSymbol
4twoSymbols
5threeSymbols
6fourSymbols
7fiveSymbols
8sixSymbols
9sevenSymbols
10eightSymbols
11nineSymbols
12tenSymbols
13elevenSymbols
14twelveSymbols
15thirteeSymbols
16fourteenSymbols
17fifteenSymbols
18sixteenSymbols
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.21
zxAnXdsl2ConfProfCh2Enabled
Enable /disable the bearer channel 1.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.22
zxAnXdsl2Ch2ConfChanRaRatioDs
Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #1 when performing rate
adaptation on Downstream. The ratio refers to the available
data rate in excess of the Minimum D…
percentsUnsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.23
zxAnXdsl2Ch2ConfChanRaRatioUs
Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #1 when performing rate
adaptation on Upstream. The ratio refers to the available
data rate in excess of the Minimum Dat…
percentsUnsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.24
zxAnXdsl2Ch2ConfProfMaxDataRateDs
Maximum Data Rate on Downstream direction. The maximum net
data rate for the bearer channel, coded in bit/s.
kbpsUnsigned32r/w
Constraints:
range: 0-200000
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.25
zxAnXdsl2Ch2ConfProfMaxDataRateUs
Maximum Data Rate on Upstream direction. The maximum net
data
rate for the bearer channel, coded in bit/s.
kbpsUnsigned32r/w
Constraints:
range: 0-200000
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.26
zxAnXdsl2Ch2ConfProfMinDataRateDs
Minimum Data Rate on Downstream direction. The minimum net
data rate for the bearer channel, coded in bit/s.
kbpsUnsigned32r/w
Constraints:
range: 0-200000
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.27
zxAnXdsl2Ch2ConfProfMinDataRateUs
Minimum Data Rate on Upstream direction. The minimum net
data
rate for the bearer channel, coded in bit/s.
kbpsUnsigned32r/w
Constraints:
range: 0-200000
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.28
zxAnXdsl2Ch2ConfProfMaxDelayDs
Maximum Interleave Delay on Downstream direction. The
maximum
one-way interleaving delay introduced by the PMS-TC on
Downstream direction. The xTUs shall choose the S (factor)
and D (depth) values such that the act…
millisecondsUnsigned32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.29
zxAnXdsl2Ch2ConfProfMaxDelayUs
Maximum Interleave Delay on Upstream direction. The maximum
one-way interleaving delay introduced by the PMS-TC on
Upstream direction. The xTUs shall choose the S (factor) and
D (depth) values such that the actual one…
millisecondsUnsigned32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.30
zxAnXdsl2Ch2ConfProfMinProtectionDs
Minimum Impulse Noise Protection on Downstream direction.
The
minimum impulse noise protection for the bearer channel,
expressed in symbols. The parameter can take the following
values: noProtection (i.e., INP not r…
symbolsVDSL2-LINE-TC-MIBXdsl2SymbolProtectionr/w
Textual Convention: VDSL2-LINE-TC-MIBXdsl2SymbolProtection Enumeration
Type Values:
1noProtection
2halfSymbol
3singleSymbol
4twoSymbols
5threeSymbols
6fourSymbols
7fiveSymbols
8sixSymbols
9sevenSymbols
10eightSymbols
11nineSymbols
12tenSymbols
13elevenSymbols
14twelveSymbols
15thirteeSymbols
16fourteenSymbols
17fifteenSymbols
18sixteenSymbols
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.31
zxAnXdsl2Ch2ConfProfMinProtectionUs
Minimum Impulse Noise Protection on Upstream direction. The
minimum impulse noise protection for the bearer channel,
expressed in symbols.
symbolsVDSL2-LINE-TC-MIBXdsl2SymbolProtectionr/w
Textual Convention: VDSL2-LINE-TC-MIBXdsl2SymbolProtection Enumeration
Type Values:
1noProtection
2halfSymbol
3singleSymbol
4twoSymbols
5threeSymbols
6fourSymbols
7fiveSymbols
8sixSymbols
9sevenSymbols
10eightSymbols
11nineSymbols
12tenSymbols
13elevenSymbols
14twelveSymbols
15thirteeSymbols
16fourteenSymbols
17fifteenSymbols
18sixteenSymbols
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.32
zxAnXdsl2ServiceConfProfRowStatus
This object is used to create a new row or to modify or
delete an existing row in this table.

A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.40

zxAnXdsl2DpboConfProfTable

table
.1.3.6.1.4.1.3902.1015.1001.1.3.3 · 1 row entry · 10 columns
Open in standard view 
The table zxAnXdsl2DpboConfProfTable contains VDSL2/ADSL/
ADSL2 and ADSL2+ Dpbo configuration profile.
Entries in this table MUST be maintained in a
persistent manner.
zxAnXdsl2DpboConfProfEntry entry .1.3.6.1.4.1.3902.1015.1001.1.3.3.1
The table zxAnXdsl2DpboConfProfTable contains VDSL2/ADSL/
ADSL2 and ADSL2+ basic configuration profile.

A default profile with an index of 'DEFVAL' will
always exist and its parameters will be set to vendor…
Indexes
zxAnXdsl2DpboConfProfileName
Column Syntax OID
zxAnXdsl2DpboConfProfileName
This object identifies a row in this table.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.3902.1015.1001.1.3.3.1.1
zxAnXdsl2LConfProfDpboEPsd
(DPBOEPSD).
This configuration parameter defines the PSD mask that
is assumed to be permitted at the exchange. This parameter
shall use the same format as zxAnXdsl2LConfProfPsdMaskDs (PSDMASKds).
The maximum number of b…
VDSL2-LINE-TC-MIBXdsl2PsdMaskDsr/w
Textual Convention: VDSL2-LINE-TC-MIBXdsl2PsdMaskDs OctetString
Type Constraints:
range: 0..96
 .1.3.6.1.4.1.3902.1015.1001.1.3.3.1.2
zxAnXdsl2LConfProfDpboEsEL
(DPBOESEL).
This configuration parameter defines the assumed
electrical length of cables (E-side cables) connecting
exchange based DSL services to a remote flexibility point
(cabinet), that hosts the xTU-C that is subje…
0.5 dBUnsigned32r/w
Constraints:
range: 0-511
 .1.3.6.1.4.1.3902.1015.1001.1.3.3.1.3
zxAnXdsl2LConfProfDpboEsCableModelA
(DPBOESCMA).
The E-side Cable Model parameter A (DPBOESCMA) of the
cable model (DPBOESCM) for cables connecting exchange based DSL
services to a remote flexibility point (cabinet), that hosts
the xTU-C that is subject t…
2^-8Unsigned32r/w
Constraints:
range: 0-640
 .1.3.6.1.4.1.3902.1015.1001.1.3.3.1.4
zxAnXdsl2LConfProfDpboEsCableModelB
(DPBOESCMB).
The E-side Cable Model parameter B (DPBOESCMB) of the
cable model (DPBOESCM) for cables connecting exchange based DSL
services to a remote flexibility point (cabinet), that hosts
the xTU-C that is subject t…
2^-8Unsigned32r/w
Constraints:
range: 0-640
 .1.3.6.1.4.1.3902.1015.1001.1.3.3.1.5
zxAnXdsl2LConfProfDpboEsCableModelC
(DPBOESCMC).
The E-side Cable Model parameter C (DPBOESCMC) of the
cable model (DPBOESCM) for cables connecting exchange based DSL
services to a remote flexibility point (cabinet), that hosts
the xTU-C that is subject t…
2^-8Unsigned32r/w
Constraints:
range: 0-640
 .1.3.6.1.4.1.3902.1015.1001.1.3.3.1.6
zxAnXdsl2LConfProfDpboMus
(DPBOMUS).
This configuration parameter defines the assumed Minimum Usable
receive PSD mask (in dBm/Hz) for exchange based services,
used to modify parameter zxAnXdsl2LConfProfDpboFMax (DPBOFMAX) defined
below [to deter…
0.5 dBUnsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3902.1015.1001.1.3.3.1.7
zxAnXdsl2LConfProfDpboFMin
(DPBOFMIN).
This configuration parameter defines the minimum frequency
from which the DPBO shall be applied. It ranges from
0 kHz (coded as 0) to 8832 kHz (coded as 2048) in steps
of 4.3125 kHz. This parameter is used o…
4.3125 kHzUnsigned32r/w
Constraints:
range: 0-2048
 .1.3.6.1.4.1.3902.1015.1001.1.3.3.1.8
zxAnXdsl2LConfProfDpboFMax
(DPBOFMAX).
This configuration parameter defines the maximum frequency at
which DPBO may be applied. It ranges from 138 kHz (coded as 32)
to 29997.75 kHz (coded as 6956) in steps of 4.3125 kHz.
This parameter is used on…
4.3125 kHzUnsigned32r/w
Constraints:
range: 32-6956
 .1.3.6.1.4.1.3902.1015.1001.1.3.3.1.9
zxAnXdsl2DpboConfProfRowStatus
This object is used to create a new row or to modify or
delete an existing row in this table.

A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3902.1015.1001.1.3.3.1.20

zxAnXdsl2UpboConfProfTable

table
.1.3.6.1.4.1.3902.1015.1001.1.3.4 · 1 row entry · 14 columns
Open in standard view 
The table xdsl2UpboConfProfTable contains VDSL2/ADSL/
ADSL2 and ADSL2+ Upbo configuration profile.
Entries in this table MUST be maintained in a
persistent manner.
zxAnXdsl2UpboConfProfEntry entry .1.3.6.1.4.1.3902.1015.1001.1.3.4.1
The table xdsl2UpboConfProfTable contains VDSL2/ADSL/
ADSL2 and ADSL2+ basic configuration profile.

A default profile with an index of 'DEFVAL' will
always exist and its parameters will be set to vendor-spe…
Indexes
zxAnXdsl2LUpboConfProfileName
Column Syntax OID
zxAnXdsl2LUpboConfProfileName
This object identifies a row in this table.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.1
zxAnXdsl2LConfProfUpboKL
(UPBOKL).
This configuration parameter defines the electrical length
expressed in dB at 1MHz, kl0, configured by the CO-MIB.
The value ranges from 0 (coded as 0) to 128 dB (coded as 1280)
in steps of 0.1 dB. This parame…
0.1 dBUnsigned32r/w
Constraints:
range: 0-1280
 .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.2
zxAnXdsl2LConfProfUpboKLF
Defines the upstream power backoff force mode (UPBOKLF).
The three possible mode values are:
auto(1),
override(2), &
disableUpbo(3).
VDSL2-LINE-TC-MIBXdsl2UpboKLFr/w
Textual Convention: VDSL2-LINE-TC-MIBXdsl2UpboKLF Enumeration
Type Values:
1auto
2override
3disableUpbo
 .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.3
zxAnXdsl2LConfProfUpboU0bandPsdA
(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOPSD defined for each band
shall consist o…
0.01 dBm/HzUnsigned32r/w
Constraints:
range: 4000-8095
 .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.4
zxAnXdsl2LConfProfUpboU0bandPsdB
(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOPSD defined for each band
shall consist o…
0.01 dBm/HzUnsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.5
zxAnXdsl2LConfProfUpboU1bandPsdA
(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOPSD defined for each band
shall consist o…
0.01 dBm/HzUnsigned32r/w
Constraints:
range: 4000-8095
 .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.6
zxAnXdsl2LConfProfUpboU1bandPsdB
(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOPSD defined for each band
shall consist o…
0.01 dBm/HzUnsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.7
zxAnXdsl2LConfProfUpboU2bandPsdA
(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOPSD defined for each band
shall consist o…
0.01 dBm/HzUnsigned32r/w
Constraints:
range: 4000-8095
 .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.8
zxAnXdsl2LConfProfUpboU2bandPsdB
(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOPSD defined for each band
shall consist o…
0.01 dBm/HzUnsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.9
zxAnXdsl2LConfProfUpboU3bandPsdA
(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOPSD defined for each band
shall consist o…
0.01 dBm/HzUnsigned32r/w
Constraints:
range: 4000-8095
 .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.10
zxAnXdsl2LConfProfUpboU3bandPsdB
(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOPSD defined for each band
shall consist o…
0.01 dBm/HzUnsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.11
zxAnXdsl2LConfProfUpboU4bandPsdA
(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOPSD defined for each band
shall consist o…
0.01 dBm/HzUnsigned32r/w
Constraints:
range: 4000-8095
 .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.12
zxAnXdsl2LConfProfUpboU4bandPsdB
(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOPSD defined for each band
shall consist o…
0.01 dBm/HzUnsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.13
zxAnXdsl2LUpboConfProfRowStatus
This object is used to create a new row or to modify or
delete an existing row in this table.

A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.20

zxAnXdsl2AlmThreshPrfTable

table
.1.3.6.1.4.1.3902.1015.1001.1.4.1 · 1 row entry · 37 columns
Open in standard view 
The table zxAnXdsl2AlmThreshPrfTable contains DSL
line PM thresholds profiles.
          
 Entries in this table MUST be maintained in a
 persistent manner.
zxAnXdsl2AlmThreshPrfEntry entry .1.3.6.1.4.1.3902.1015.1001.1.4.1.1
The table zxAnXdsl2AlmThreshPrfTable contains DSL
line PM thresholds profiles.
A default profile with an index of 'DEFVAL' will
always exist and its parameters will be set to vendor
specific values, unless otherwise spe…
Indexes
zxAnXdsl2AlmThreshPrfName
Column Syntax OID
zxAnXdsl2AlmThreshPrfName
This object identifies a row in this table.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.1
zxAnXdsl2XtucThreshFecs
A threshold for the xdsl2PMLCurr15MFecs counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter.
secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w
Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalThreshold Unsigned32
Type Constraints:
range: 0..900
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.2
zxAnXdsl2XtucThreshEs
A threshold for the xdsl2PMLCurr15MEs counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter.
secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w
Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalThreshold Unsigned32
Type Constraints:
range: 0..900
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.3
zxAnXdsl2XtucThreshSes
A threshold for the xdsl2PMLCurr15MSes counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter.
secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w
Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalThreshold Unsigned32
Type Constraints:
range: 0..900
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.4
zxAnXdsl2XtucThreshLoss
A threshold for the zxAnXdsl2PMLCurr15MLoss counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter.
secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w
Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalThreshold Unsigned32
Type Constraints:
range: 0..900
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.5
zxAnXdsl2XtucThreshLofs
A threshold for the xdsl2PMLCurr15MLoss counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter.
secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w
Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalThreshold Unsigned32
Type Constraints:
range: 0..900
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.6
zxAnXdsl2XtucThreshLols
A threshold for the xdsl2PMLCurr15MLoss counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter.
secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w
Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalThreshold Unsigned32
Type Constraints:
range: 0..900
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.7
zxAnXdsl2XtucThreshLprs
A threshold for the xdsl2PMLCurr15MLoss counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter.
secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w
Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalThreshold Unsigned32
Type Constraints:
range: 0..900
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.8
zxAnXdsl2XtucThreshUas
A threshold for the zxAnXdsl2PMLCurr15MUas counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter.
secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w
Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalThreshold Unsigned32
Type Constraints:
range: 0..900
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.9
zxAnXdsl2XtucThreshPtmCrcErrs
A threshold for the zxAnXdsl2PMLCurr15MPtmCrcErrs counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.10
zxAnXdsl2XtucThreshPtmCodViol
A threshold for the zxAnXdsl2PMLCurr15MPtmCodViol counter,
when xdsl2PMLCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.11
zxAnXdsl2XturThreshFecs
A threshold for the xdsl2PMLCurr15MFecs counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter.
secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w
Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalThreshold Unsigned32
Type Constraints:
range: 0..900
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.12
zxAnXdsl2XturThreshEs
A threshold for the xdsl2PMLCurr15MEs counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter.
secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w
Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalThreshold Unsigned32
Type Constraints:
range: 0..900
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.13
zxAnXdsl2XturThreshSes
A threshold for the xdsl2PMLCurr15MSes counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter.
secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w
Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalThreshold Unsigned32
Type Constraints:
range: 0..900
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.14
zxAnXdsl2XturThreshLoss
A threshold for the xdsl2PMLCurr15MLoss counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter.
secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w
Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalThreshold Unsigned32
Type Constraints:
range: 0..900
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.15
zxAnXdsl2XturThreshLofs
A threshold for the xdsl2PMLCurr15MLoss counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter.
secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w
Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalThreshold Unsigned32
Type Constraints:
range: 0..900
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.16
zxAnXdsl2XturThreshLprs
A threshold for the xdsl2PMLCurr15MLoss counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter.
secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w
Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalThreshold Unsigned32
Type Constraints:
range: 0..900
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.18
zxAnXdsl2XturThreshUas
A threshold for the xdsl2PMLCurr15MUas counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter.
secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w
Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalThreshold Unsigned32
Type Constraints:
range: 0..900
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.19
zxAnXdsl2XturThreshPtmCrcErrs
A threshold for the zxAnXdsl2PMLCurr15MPtmCrcErrs counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.20
zxAnXdsl2XturThreshPtmCodViol
A threshold for the zxAnXdsl2PMLCurr15MPtmCodViol counter,
when xdsl2PMLCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.21
zxAnXdsl2ThreshFailedFullInt
A threshold for the xdsl2PMLCurrInit15MfailedFullInits
counter.
The value 0 means that no threshold is specified for the
associated counter.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.22
zxAnXdsl2ThreshFailedShrtInt
A threshold for the xdsl2PMLCurrInit15MFailedShortInits
counter.
The value 0 means that no threshold is specified for the
associated counter.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.23
zxAnXdsl2Ch1XtucThrshCodeViol
A threshold for the xdsl2PMChCurr15MCodingViolations
counter, when xdsl2PMChCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.24
zxAnXdsl2Ch1XtucThrshCorrected
A threshold for the xdsl2PMChCurr15MCorrectedBlocks
counter, when xdsl2PMChCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.25
zxAnXdsl2Ch1XturThrshCodeViol
A threshold for the xdsl2PMChCurr15MCodingViolations
counter, when xdsl2PMChCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.26
zxAnXdsl2Ch1XturThrshCorrected
A threshold for the xdsl2PMChCurr15MCorrectedBlocks
counter, when xdsl2PMChCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.27
zxAnXdsl2Ch2XtucThrshCodeViol
A threshold for the xdsl2PMChCurr15MCodingViolations
counter, when xdsl2PMChCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.28
zxAnXdsl2Ch2XtucThrshCorrected
A threshold for the xdsl2PMChCurr15MCorrectedBlocks
counter, when xdsl2PMChCurrUnit is xtuc {1}.
The value 0 means that no threshold is specified for the
associated counter.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.29
zxAnXdsl2Ch2XturThrshCodeViol
A threshold for the xdsl2PMChCurr15MCodingViolations
counter, when xdsl2PMChCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.30
zxAnXdsl2Ch2XturThrshCorrected
A threshold for the xdsl2PMChCurr15MCorrectedBlocks
counter, when xdsl2PMChCurrUnit is xtur {2}.
The value 0 means that no threshold is specified for the
associated counter.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.31
zxAnXdsl2AlmThreshPrfRowStatus
This object is used to create a new row or to modify or
delete an existing row in this table.

A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.32
zxAnXdsl2XtucLowDataRateTolerance
Tolerance between zxAnXdsl2ChConfMaxDataRateDs and
xdsl2ChStatusActDataRate(xtuc).
Calculation:
100*(zxAnXdsl2ChConfMaxDataRateDs - xdsl2ChStatusActDataRate(xtuc))
Difference =---------…
%Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.33
zxAnXdsl2XturLowDataRateTolerance
Tolerance between zxAnXdsl2ChConfMaxDataRateUs and
xdsl2ChStatusActDataRate(xtur).
Calculation:
100*(zxAnXdsl2ChConfMaxDataRateUs - xdsl2ChStatusActDataRate(xtur))
Difference =---------…
%Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.34
zxAnXdsl2XtucLowDataRateThresh
Threshold of xtuc data rate.
If xdsl2ChStatusActDataRate(xtuc) is lower than zxAnXdsl2XtucLowDataRateThresh,
zxAnXdsl2LineXtucLowDataRateTrap will be sent.
A value of `0' will disable the trap.
kbpsSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.35
zxAnXdsl2XturLowDataRateThresh
Threshold of xtur data rate.
If xdsl2ChStatusActDataRate(xtur) is lower than zxAnXdsl2XturLowDataRateThresh,
zxAnXdsl2LineXturLowDataRateTrap will be sent.
A value of `0' will disable the trap.
kbpsSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.36
zxAnXdsl2XtucInitFailTrapEnable
Enables and disables the InitFailureTrap on the xTU-C interface.

unused1 (0) - This bit is no use to enable or disable
the InitFailureTrap on the xTU-C
…
Bitsr/w
Enumerated Values:
0unused1
1lossOfFraming
2lossOfSignal
3lossOfPower
4initFailure
5lossOfSignalQuality
6lossOfLink
7lossOfSignalAlm
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.37
zxAnXdsl2XturInitFailTrapEnable
Enables and disables the InitFailureTrap on the xTU-R interface.

unused1 (0) - This bit is no use to enable or disable
the InitFailureTrap on the xTU-R
…
Bitsr/w
Enumerated Values:
0unused1
1lossOfFraming
2lossOfSignal
3lossOfPower
4unused2
5lossOfSignalQuality
6unused3
7lossOfSignalAlm
8lossOfPowerAlm
 .1.3.6.1.4.1.3902.1015.1001.1.4.1.1.38

zxAnXdsl2PMLineCurrTable

table
.1.3.6.1.4.1.3902.1015.1001.1.5.1 · 1 row entry · 10 columns
Open in standard view 
The table zxAnXdsl2PMLineCurrTable contains current Performance
Monitoring results of DSL line.
zxAnXdsl2PMLineCurrEntry entry .1.3.6.1.4.1.3902.1015.1001.1.5.1.1
The table zxAnXdsl2PMLineCurrTable contains current Performance
Monitoring results of DSL line.
The index of this table is an interface index where the
interface has an ifType of vdsl2(xxx) and the termination
unit.
Indexes
No indexes recorded
Column Syntax OID
zxAnXdsl2PMLCurr15MLofs
Count of seconds during this interval that there was LOF .
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.5.1.1.1
zxAnXdsl2PMLCurr15MLols
Count of seconds during this interval that there was LOL.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.5.1.1.2
zxAnXdsl2PMLCurr15MLprs
Count of seconds during this interval that there was LPR.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.5.1.1.3
zxAnXdsl2PMLCurr15MPtmCrcErrs
Count of the number of occurrences of Ptm Crc Errors during
this interval.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.5.1.1.4
zxAnXdsl2PMLCurr15MPtmCodViol
Count of the number of occurrences of Ptm coding violations during
this interval.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.5.1.1.5
zxAnXdsl2PMLCurr1DayLofs
Count of seconds during this interval that there was LOF.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.5.1.1.6
zxAnXdsl2PMLCurr1DayLols
Count of seconds during this interval that there was LOL.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.5.1.1.7
zxAnXdsl2PMLCurr1DayLprs
Count of seconds during this interval that there was LPR.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.5.1.1.8
zxAnXdsl2PMLCurr1DayPtmCrcErrs
Count of the number of occurrences of Ptm Crc Errors during
this interval.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.5.1.1.9
zxAnXdsl2PMLCurr1DayPtmCodViol
Count of the number of occurrences of Ptm coding violations during
this interval.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.5.1.1.10

zxAnXdsl2PMLineHist15MinTable

table
.1.3.6.1.4.1.3902.1015.1001.1.5.2 · 1 row entry · 7 columns
Open in standard view 
The table zxAnXdsl2PMLineHist15MinTable contains history Performance 
Monitoring results for 15min of DSL line.
zxAnXdsl2PMLineHist15MinEntry entry .1.3.6.1.4.1.3902.1015.1001.1.5.2.1
The table zxAnXdsl2PMLineHist15MinTable contains history Performance
Monitoring results for 15min of DSL line.
The index of this table is an interface index where the
interface has an ifType of vdsl2(xxx) and the term…
Indexes
No indexes recorded
Column Syntax OID
zxAnXdsl2PMLHist15MMonitoredTime
Total seconds monitored in this interval.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.5.2.1.1
zxAnXdsl2PMLHist15MLofs
Count of seconds during this interval that there was LOF .
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.5.2.1.2
zxAnXdsl2PMLHist15MLols
Count of seconds during this interval that there was LOL.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.5.2.1.3
zxAnXdsl2PMLHist15MLprs
Count of seconds during this interval that there was LPR.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.5.2.1.4
zxAnXdsl2PMLHist15MPtmCrcErrs
Count of the number of occurrences of Ptm Crc Errors during
this interval.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.5.2.1.5
zxAnXdsl2PMLHist15MPtmCodViol
Count of the number of occurrences of Ptm coding violations during
this interval.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1001.1.5.2.1.6
zxAnXdsl2PMLHist15MValidInterval
This variable indicates if the data for this interval is
valid.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3902.1015.1001.1.5.2.1.7