zxAnXdsl2LConfProfForceInp
ZTE-AN-XDSL2-MIB ·
.1.3.6.1.4.1.3902.1015.1001.1.3.2.1.2
Object
Enable /disable force to use INP.
Context
- MIB
- ZTE-AN-XDSL2-MIB
- OID
.1.3.6.1.4.1.3902.1015.1001.1.3.2.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zxAnXdsl2ServiceConfProfEntry
- Table
- zxAnXdsl2ServiceConfProfTable
- Siblings
- 32
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnXdsl2ServiceConfProfileName This object identifies a row in this table. | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.1 |
| zxAnXdsl2LConfProfMinSnrmUs The minimum Noise Margin the xTU-C receiver shall tolerate.
If the noise margin falls below this level, the xTU-C shall
request that the xTU-R increase the xTU-R transmit power.
I… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.10 |
| zxAnXdsl2ConfProfCh1Enabled Enable /disable the bearer channel 1. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.11 |
| zxAnXdsl2Ch1ConfChanRaRatioDs Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #1 when performing rate
adaptation on Downstream. The ratio refers to the availa… | column | percents Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.12 |
| zxAnXdsl2Ch1ConfChanRaRatioUs Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #1 when performing rate
adaptation on Upstream. The ratio refers to the availabl… | column | percents Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.13 |
| zxAnXdsl2Ch1ConfProfMaxDataRateDs Maximum Data Rate on Downstream direction. The maximum net
data rate for the bearer channel, coded in bit/s. | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.14 |
| zxAnXdsl2Ch1ConfProfMaxDataRateUs Maximum Data Rate on Upstream direction. The maximum net
data
rate for the bearer channel, coded in bit/s. | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.15 |
| zxAnXdsl2Ch1ConfProfMinDataRateDs Minimum Data Rate on Downstream direction. The minimum net
data rate for the bearer channel, coded in bit/s. | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.16 |
| zxAnXdsl2Ch1ConfProfMinDataRateUs Minimum Data Rate on Upstream direction. The minimum net
data
rate for the bearer channel, coded in bit/s. | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.17 |
| zxAnXdsl2Ch1ConfProfMaxDelayDs Maximum Interleave Delay on Downstream direction. The
maximum
one-way interleaving delay introduced by the PMS-TC on
Downstream direction. The xTUs shall choose the S (factor)… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.18 |
| zxAnXdsl2Ch1ConfProfMaxDelayUs Maximum Interleave Delay on Upstream direction. The maximum
one-way interleaving delay introduced by the PMS-TC on
Upstream direction. The xTUs shall choose the S (factor) and
D… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.19 |
| zxAnXdsl2Ch1ConfProfMinProtectionDs Minimum Impulse Noise Protection on Downstream direction.
The
minimum impulse noise protection for the bearer channel,
expressed in symbols. The parameter can take the followin… | column | symbols VDSL2-LINE-TC-MIBXdsl2SymbolProtection | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.20 |
| zxAnXdsl2Ch1ConfProfMinProtectionUs Minimum Impulse Noise Protection on Upstream direction. The
minimum impulse noise protection for the bearer channel,
expressed in symbols. | column | symbols VDSL2-LINE-TC-MIBXdsl2SymbolProtection | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.21 |
| zxAnXdsl2ConfProfCh2Enabled Enable /disable the bearer channel 1. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.22 |
| zxAnXdsl2Ch2ConfChanRaRatioDs Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #1 when performing rate
adaptation on Downstream. The ratio refers to the availa… | column | percents Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.23 |
| zxAnXdsl2Ch2ConfChanRaRatioUs Rate Adaptation Ratio. The ratio (in %) that should be taken
into account for the bearer channel #1 when performing rate
adaptation on Upstream. The ratio refers to the availabl… | column | percents Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.24 |
| zxAnXdsl2Ch2ConfProfMaxDataRateDs Maximum Data Rate on Downstream direction. The maximum net
data rate for the bearer channel, coded in bit/s. | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.25 |
| zxAnXdsl2Ch2ConfProfMaxDataRateUs Maximum Data Rate on Upstream direction. The maximum net
data
rate for the bearer channel, coded in bit/s. | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.26 |
| zxAnXdsl2Ch2ConfProfMinDataRateDs Minimum Data Rate on Downstream direction. The minimum net
data rate for the bearer channel, coded in bit/s. | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.27 |
| zxAnXdsl2Ch2ConfProfMinDataRateUs Minimum Data Rate on Upstream direction. The minimum net
data
rate for the bearer channel, coded in bit/s. | column | kbps Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.28 |
| zxAnXdsl2Ch2ConfProfMaxDelayDs Maximum Interleave Delay on Downstream direction. The
maximum
one-way interleaving delay introduced by the PMS-TC on
Downstream direction. The xTUs shall choose the S (factor)… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.29 |
| zxAnXdsl2LConfProfRaModeDs The mode of operation of a rate-adaptive xTU-C in the transmit
direction. The parameter can take three values:
fixed (1),
raInit (2),
dynamicRa (3). | column | VDSL2-LINE-TC-MIBXdsl2RaMode | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.3 |
| zxAnXdsl2Ch2ConfProfMaxDelayUs Maximum Interleave Delay on Upstream direction. The maximum
one-way interleaving delay introduced by the PMS-TC on
Upstream direction. The xTUs shall choose the S (factor) and
D… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.30 |
| zxAnXdsl2Ch2ConfProfMinProtectionDs Minimum Impulse Noise Protection on Downstream direction.
The
minimum impulse noise protection for the bearer channel,
expressed in symbols. The parameter can take the followin… | column | symbols VDSL2-LINE-TC-MIBXdsl2SymbolProtection | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.31 |
| zxAnXdsl2Ch2ConfProfMinProtectionUs Minimum Impulse Noise Protection on Upstream direction. The
minimum impulse noise protection for the bearer channel,
expressed in symbols. | column | symbols VDSL2-LINE-TC-MIBXdsl2SymbolProtection | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.32 |
| zxAnXdsl2LConfProfRaModeUs The mode of operation of a rate-adaptive xTU-R in the transmit
direction. The parameter can take three values:
fixed (1),
raInit (2),
dynamicRa (3). | column | VDSL2-LINE-TC-MIBXdsl2RaMode | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.4 |
| zxAnXdsl2ServiceConfProfRowStatus This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'activ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.40 |
| zxAnXdsl2LConfProfTargetSnrmDs The minimum Noise Margin the xTU-R receiver shall achieve,
relative to the BER requirement for each of the downstream
bearer channels, to successfull… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.5 |
| zxAnXdsl2LConfProfTargetSnrmUs The minimum Noise Margin the xTU-C receiver shall achieve,
relative to the BER requirement for each of the upstream
bearer channels, to successfully … | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.6 |
| zxAnXdsl2LConfProfMaxSnrmDs The maximum Noise Margin the xTU-R receiver shall try to
sustain. If the Noise Margin is above this level, the xTU-R
shall request that the xTU-C reduce the xTU-C transmit power
… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.7 |
| zxAnXdsl2LConfProfMaxSnrmUs The maximum Noise Margin the xTU-C receiver shall try to
sustain. If the Noise Margin is above this level, the xTU-C
shall request that the xTU-R reduce the xTU-R transmit power
… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.8 |
| zxAnXdsl2LConfProfMinSnrmDs The minimum Noise Margin the xTU-R receiver shall tolerate.
If the noise margin falls below this level, the xTU-R shall
request that the xTU-C increase the xTU-C transmit power.
I… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.2.1.9 |