zxAnXdsl2LConfProfDpboMus
ZTE-AN-XDSL2-MIB ·
.1.3.6.1.4.1.3902.1015.1001.1.3.3.1.7
Object
column
r/w
0.5 dB Unsigned32
(DPBOMUS). This configuration parameter defines the assumed Minimum Usable receive PSD mask (in dBm/Hz) for exchange based services, used to modify parameter zxAnXdsl2LConfProfDpboFMax (DPBOFMAX) defined below [to determine the DPBO]. It shall be coded as an unsigned integer representing a PSD mask level from 0 dBm/Hz (coded as 0) to -127.5 dBm/Hz (coded as 255) in steps of 0.5 dB. All values in the range are valid. NOTE - The PSD mask level is 3.5 dB above the signal PSD level. This parameter is used only for G.993.2.
Context
- MIB
- ZTE-AN-XDSL2-MIB
- OID
.1.3.6.1.4.1.3902.1015.1001.1.3.3.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Units
- 0.5 dB
- Parent
- zxAnXdsl2DpboConfProfEntry
- Table
- zxAnXdsl2DpboConfProfTable
- Siblings
- 9
Syntax
0.5 dB Unsigned32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnXdsl2DpboConfProfileName This object identifies a row in this table. | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.3.3.1.1 |
| zxAnXdsl2LConfProfDpboEPsd (DPBOEPSD).
This configuration parameter defines the PSD mask that
is assumed to be permitted at the exchange. This parameter
shall use the same format as zxAnXdsl2LConfProfPsdMas… | column | VDSL2-LINE-TC-MIBXdsl2PsdMaskDs | .1.3.6.1.4.1.3902.1015.1001.1.3.3.1.2 |
| zxAnXdsl2DpboConfProfRowStatus This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'activ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1015.1001.1.3.3.1.20 |
| zxAnXdsl2LConfProfDpboEsEL (DPBOESEL).
This configuration parameter defines the assumed
electrical length of cables (E-side cables) connecting
exchange based DSL services to a remote flexibility point
(cabi… | column | 0.5 dB Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.3.1.3 |
| zxAnXdsl2LConfProfDpboEsCableModelA (DPBOESCMA).
The E-side Cable Model parameter A (DPBOESCMA) of the
cable model (DPBOESCM) for cables connecting exchange based DSL
services to a remote flexibility point (cabinet)… | column | 2^-8 Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.3.1.4 |
| zxAnXdsl2LConfProfDpboEsCableModelB (DPBOESCMB).
The E-side Cable Model parameter B (DPBOESCMB) of the
cable model (DPBOESCM) for cables connecting exchange based DSL
services to a remote flexibility point (cabinet)… | column | 2^-8 Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.3.1.5 |
| zxAnXdsl2LConfProfDpboEsCableModelC (DPBOESCMC).
The E-side Cable Model parameter C (DPBOESCMC) of the
cable model (DPBOESCM) for cables connecting exchange based DSL
services to a remote flexibility point (cabinet)… | column | 2^-8 Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.3.1.6 |
| zxAnXdsl2LConfProfDpboFMin (DPBOFMIN).
This configuration parameter defines the minimum frequency
from which the DPBO shall be applied. It ranges from
0 kHz (coded as 0) to 8832 kHz (coded as 2048) in steps… | column | 4.3125 kHz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.3.1.8 |
| zxAnXdsl2LConfProfDpboFMax (DPBOFMAX).
This configuration parameter defines the maximum frequency at
which DPBO may be applied. It ranges from 138 kHz (coded as 32)
to 29997.75 kHz (coded as 6956) in steps … | column | 4.3125 kHz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.3.1.9 |