zxAnXdsl2LConfProfUpboU2bandPsdA
ZTE-AN-XDSL2-MIB ·
.1.3.6.1.4.1.3902.1015.1001.1.3.4.1.8
Object
column
r/w
0.01 dBm/Hz Unsigned32
(UPBOPSD-pb). This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band. A UPBOPSD defined for each band shall consist of two parameters [a, b]. Parameter 'a' (zxAnXdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and parameter 'b' (zxAnXdsl2LConfProfUpboPsdB) ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f' expressed in MHz shall be equal to '-a-b(SQRT(f))'. Setting zxAnXdsl2LConfProfUpboPsdA to 4000 and zxAnXdsl2LConfProfUpboPsdB to 0 is a special configuration to disable UPBO in the respective upstream band.
Context
- MIB
- ZTE-AN-XDSL2-MIB
- OID
.1.3.6.1.4.1.3902.1015.1001.1.3.4.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Units
- 0.01 dBm/Hz
- Parent
- zxAnXdsl2UpboConfProfEntry
- Table
- zxAnXdsl2UpboConfProfTable
- Siblings
- 13
Syntax
0.01 dBm/Hz Unsigned32
Values & Constraints
Object Constraints
range: 4000-8095
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnXdsl2LUpboConfProfileName This object identifies a row in this table. | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.1 |
| zxAnXdsl2LConfProfUpboU3bandPsdA (UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOP… | column | 0.01 dBm/Hz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.10 |
| zxAnXdsl2LConfProfUpboU3bandPsdB (UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOP… | column | 0.01 dBm/Hz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.11 |
| zxAnXdsl2LConfProfUpboU4bandPsdA (UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOP… | column | 0.01 dBm/Hz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.12 |
| zxAnXdsl2LConfProfUpboU4bandPsdB (UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOP… | column | 0.01 dBm/Hz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.13 |
| zxAnXdsl2LConfProfUpboKL (UPBOKL).
This configuration parameter defines the electrical length
expressed in dB at 1MHz, kl0, configured by the CO-MIB.
The value ranges from 0 (coded as 0) to 128 dB (coded … | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.2 |
| zxAnXdsl2LUpboConfProfRowStatus This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'activ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.20 |
| zxAnXdsl2LConfProfUpboKLF Defines the upstream power backoff force mode (UPBOKLF).
The three possible mode values are:
auto(1),
override(2), &
disableUpbo(3). | column | VDSL2-LINE-TC-MIBXdsl2UpboKLF | .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.3 |
| zxAnXdsl2LConfProfUpboU0bandPsdA (UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOP… | column | 0.01 dBm/Hz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.4 |
| zxAnXdsl2LConfProfUpboU0bandPsdB (UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOP… | column | 0.01 dBm/Hz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.5 |
| zxAnXdsl2LConfProfUpboU1bandPsdA (UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOP… | column | 0.01 dBm/Hz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.6 |
| zxAnXdsl2LConfProfUpboU1bandPsdB (UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOP… | column | 0.01 dBm/Hz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.7 |
| zxAnXdsl2LConfProfUpboU2bandPsdB (UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOP… | column | 0.01 dBm/Hz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.9 |