zxAnXdsl2LConfProfUpboKL
ZTE-AN-XDSL2-MIB ·
.1.3.6.1.4.1.3902.1015.1001.1.3.4.1.2
Object
column
r/w
0.1 dB Unsigned32
(UPBOKL). This configuration parameter defines the electrical length expressed in dB at 1MHz, kl0, configured by the CO-MIB. The value ranges from 0 (coded as 0) to 128 dB (coded as 1280) in steps of 0.1 dB. This parameter is relevant only if zxAnXdsl2LConfProfUpboKLF is set to override(2), which indicates that this parameter's value will override the VTUs' determination of the electrical length. If zxAnXdsl2LConfProfUpboKLF is set either to auto(1) or disableUpbo(3), then this parameter will be ignored.
Context
- MIB
- ZTE-AN-XDSL2-MIB
- OID
.1.3.6.1.4.1.3902.1015.1001.1.3.4.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Units
- 0.1 dB
- Parent
- zxAnXdsl2UpboConfProfEntry
- Table
- zxAnXdsl2UpboConfProfTable
- Siblings
- 13
Syntax
0.1 dB Unsigned32
Values & Constraints
Object Constraints
range: 0-1280
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnXdsl2LUpboConfProfileName This object identifies a row in this table. | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.1 |
| zxAnXdsl2LConfProfUpboU3bandPsdA (UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOP… | column | 0.01 dBm/Hz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.10 |
| zxAnXdsl2LConfProfUpboU3bandPsdB (UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOP… | column | 0.01 dBm/Hz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.11 |
| zxAnXdsl2LConfProfUpboU4bandPsdA (UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOP… | column | 0.01 dBm/Hz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.12 |
| zxAnXdsl2LConfProfUpboU4bandPsdB (UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOP… | column | 0.01 dBm/Hz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.13 |
| zxAnXdsl2LUpboConfProfRowStatus This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'activ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.20 |
| zxAnXdsl2LConfProfUpboKLF Defines the upstream power backoff force mode (UPBOKLF).
The three possible mode values are:
auto(1),
override(2), &
disableUpbo(3). | column | VDSL2-LINE-TC-MIBXdsl2UpboKLF | .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.3 |
| zxAnXdsl2LConfProfUpboU0bandPsdA (UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOP… | column | 0.01 dBm/Hz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.4 |
| zxAnXdsl2LConfProfUpboU0bandPsdB (UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOP… | column | 0.01 dBm/Hz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.5 |
| zxAnXdsl2LConfProfUpboU1bandPsdA (UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOP… | column | 0.01 dBm/Hz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.6 |
| zxAnXdsl2LConfProfUpboU1bandPsdB (UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOP… | column | 0.01 dBm/Hz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.7 |
| zxAnXdsl2LConfProfUpboU2bandPsdA (UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOP… | column | 0.01 dBm/Hz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.8 |
| zxAnXdsl2LConfProfUpboU2bandPsdB (UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter
of the UPBO reference PSD used to compute the upstream power
back-off for the upstream band. A UPBOP… | column | 0.01 dBm/Hz Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.4.1.9 |