XSWITCH-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

273

scGenMonTable

table mandatory

.1.3.6.1.4.1.81.28.1.2.1 · 1 row entry · 16 columns

Open in standard view

Table of attributes which define Monitoring information about 
a single XSwitch in SC based devices.

scGenMonEntry entry .1.3.6.1.4.1.81.28.1.2.1.1

An entry in the table, containing data about a single XSwitch.

Indexes

scGenMonSwitchId

Column Syntax OID

scGenMonSwitchId mandatory

Index which identifies the XSwitch for which this entry contains information.
This value is never greater than chNumberOfXSwitches.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.81.28.1.2.1.1.1

scGenMonDropEvents mandatory

The total number of events in which the probe could not
count packets due to lack of resources. This number is not
necessarily the number of packets dropped; it is just the number
of times this condition has been det…

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.1.2.1.1.2

scGenMonOctets mandatory

The total number of good octets switched and error octets filtered by this XSwitch.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.1.2.1.1.3

scGenMonPkts mandatory

The total number of good packets switched and error
packets filtered by this XSwitch.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.1.2.1.1.4

scGenMonGoodBroadcastPkts mandatory

The total number of good packets switched by this
XSwitch that were directed to the broadcast address.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.1.2.1.1.5

scGenMonGoodMulticastPkts mandatory

The total number of good packets switched by this XSwitch that were
directed to the multicast address.
Note that this number does not include packets directed to the broadcast address.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.1.2.1.1.6

scGenMonGoodPkts mandatory

The total number of good packets switched by this XSwitch.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.1.2.1.1.7

scGenMonBadPkts mandatory

The total number of bad packets filtered by this XSwitch.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.1.2.1.1.8

scGenMonGoodOctets mandatory

The total number of good octets switched by this XSwitch.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.1.2.1.1.9

scGenMonBadOctets mandatory

The total number of bad octets filtered by this XSwitch.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.1.2.1.1.10

scGenMonSmonCapability mandatory

This item is used to define which smon's application are implemented in the agent.
When the console first performs smon application it should read this item in order
to know which of the smon's applications are availabl…

OctetString

Constraints:
range: 4-4

.1.3.6.1.4.1.81.28.1.2.1.1.11

scGenMonMIBCtrMode mandatory

This object defines for switch ports to include/exclude local segment traffic
in their port counters

Enumerationr/w

Enumerated Values:

1	enable
2	disable
255	notSupported

.1.3.6.1.4.1.81.28.1.2.1.1.12

scGenMonSwitchVLANList mandatory

A bitmap defining the status of the virtual LANs in the
Virtual LAN Table. The first bit is for Virtual LAN 0, the
second for Virtual LAN 1, and so on. If the Virtual LAN
exists in the hub the value of the associated…

OctetString

Constraints:
range: 32-32

.1.3.6.1.4.1.81.28.1.2.1.1.13

scGenMonMIBCtrList mandatory

A bitmap defining the status of the MIBCtrMode for
every group in the switch. The MSB (Most significant bit)
representing the status of group #1. If MIBCtrMode on a
group is enable(1) the bit is set to 1, otherwise 0.

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.81.28.1.2.1.1.14

scGenMonTimeStamp mandatory

This attribute contains the value of sysUpTime
at the time switch counters were calculated.

RFC1155-SMITimeTicks

Textual Convention: RFC1155-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.1.2.1.1.15

scGenMonVlanTimeStamp mandatory

This attribute contains the value of sysUpTime
at the time VLAN counters were calculated.

RFC1155-SMITimeTicks

Textual Convention: RFC1155-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.1.2.1.1.16

scGenMonPriorityTable

table mandatory

.1.3.6.1.4.1.81.28.1.2.2 · 1 row entry · 4 columns

Open in standard view

A list of priority count entries.

scGenMonPriorityEntry entry .1.3.6.1.4.1.81.28.1.2.2.1

A list of statistics related to a specific priority level on
a single XSwitch in SC based devices.

Indexes

scGenMonPrioritySwitchId scGenMonPriorityId

Column	Syntax	OID
scGenMonPrioritySwitchId mandatory Index which identifies the XSwitch for which this entry contains information. This value is never greater than chNumberOfXSwitches.	Integer32 Constraints: `range: 1-255`	`.1.3.6.1.4.1.81.28.1.2.2.1.1`
scGenMonPriorityId mandatory The priority for which this entry reports statistics. 1=regular. 2=high.	Integer32 Constraints: `range: 1-2`	`.1.3.6.1.4.1.81.28.1.2.2.1.2`
scGenMonPriorityGoodPkts mandatory The total number of good packets switched by this XSwitch using this packet priority level.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.81.28.1.2.2.1.3`
scGenMonPriorityGoodOctets mandatory The total number of good octets switched by this XSwitch using this packet priority level.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.81.28.1.2.2.1.4`

scGenMonVLANTable

table mandatory

.1.3.6.1.4.1.81.28.1.2.4 · 1 row entry · 7 columns

Open in standard view

A list of virtual LAN statistics.

scGenMonVLANEntry entry .1.3.6.1.4.1.81.28.1.2.4.1

A list of statistics related to a specific Virtual LAN.

Indexes

scGenMonVLANSwitchId scGenMonVLANId

Column	Syntax	OID
scGenMonVLANSwitchId mandatory Index which identifies the XSwitch for which this entry contains information. This value is never greater than chNumberOfXSwitches.	Integer32 Constraints: `range: 1-255`	`.1.3.6.1.4.1.81.28.1.2.4.1.1`
scGenMonVLANId mandatory The Virtual LAN for which this entry contains information.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.81.28.1.2.4.1.2`
scGenMonVLANGoodPkts mandatory The total number of good packets switched by the XSwitch on this Virtual LAN.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.81.28.1.2.4.1.3`
scGenMonVLANGoodOctets mandatory The total number of good octets switched by the XSwitch on this Virtual LAN.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.81.28.1.2.4.1.4`
scGenMonVLANStatsUcastPkts mandatory The total number of good unicast packets switched by the XSwitch on this Virtual LAN.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.81.28.1.2.4.1.5`
scGenMonVLANStatsMcastPkts mandatory The total number of good multicast packets switched by the XSwitch on this Virtual LAN.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.81.28.1.2.4.1.6`
scGenMonVLANStatsBcastPkts mandatory The total number of good broadcast packets switched by the XSwitch on this Virtual LAN.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.81.28.1.2.4.1.7`

scHostTimePortCorrTable

table mandatory

.1.3.6.1.4.1.81.28.1.2.6 · 1 row entry · 4 columns

Open in standard view

An addition to the RMON MIB's hostTimeTable. This table contains
a list of MAC addresses that were monitored on the switch
and the ports to which they are connected.
The index of this table is the same as for the standard RMON
hostTimeTable. Indexes are scHostTimeCreationOrder and scHostTimeIndex.
The MAC address is stored in scHostTimeAddress.
The port to which the MAC address is connected is defined in 
scHostTimePortConnection.

scHostTimePortCorrEntry entry .1.3.6.1.4.1.81.28.1.2.6.1

An entry in the MAC to port correlation table.

Indexes

scHostTimeIndex scHostTimeCreationOrder

Column	Syntax	OID
scHostTimeAddress mandatory The physical address of this host.	OctetString	`.1.3.6.1.4.1.81.28.1.2.6.1.1`
scHostTimeCreationOrder mandatory An index that uniquely identifies an entry in the hostTime table among those entries associated with the same hostControlEntry. This index shall be between 1 and N, where N is the value of the associated hostControlTab…	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.81.28.1.2.6.1.2`
scHostTimeIndex mandatory The set of collected RMON host statistics of which this entry is a part. The set of hosts identified by a particular value of this index is associated with the hostControlEntry as identified by the same value of hostC…	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.81.28.1.2.6.1.3`
scHostTimePortConnection mandatory The switch port to which this scHostTimeAddress is connected. The coding of the port number for Visage switches is: 32*(H-1)+P, where H is the number of the hub in the stack and P the port in the hub (1.. 32). For hos…	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.81.28.1.2.6.1.4`

scGenGroupTable

table mandatory

.1.3.6.1.4.1.81.28.1.3.1 · 1 row entry · 38 columns

Open in standard view

Table of attributes which define general configuration 
information about a single SC based group.

scGenGroupEntry entry .1.3.6.1.4.1.81.28.1.3.1.1

An entry in the table, containing data about a single Group.

Indexes

scGenGroupId

Column Syntax OID

scGenGroupId mandatory

Unique Id of the group in the scGenGroupTable.
Equals the number of the slot by which the group is accessed.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.3.1.1.1

scGenGroupUseSwitches mandatory

This attribute reflects the status of the `Use Switches' switch which
defines the working mode of the module.
on - The module works according to the switches. No Set commands
may be performed on attributes related to t…

Enumeration

Enumerated Values:

1	on
2	off
255	notSupported

.1.3.6.1.4.1.81.28.1.3.1.1.2

scGenGroupCopyPortSupport mandatory

Indication whether a module supports Copy-Port [on(1)],
or does not support Copy-Port [off(2)].

Enumeration

Enumerated Values:

1	on
2	off
255	notSupported

.1.3.6.1.4.1.81.28.1.3.1.1.3

scGenGroupXswitchConnection mandatory

This attribute identifies the Xswitch number (1..4) to which the module
is connected to.
In non-bridged configuration, there are potentialy up to 4 Xswitches -
1&2 for left&right Ethernet Xswitches and 3&4 for left&rig…

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.81.28.1.3.1.1.4

scGenGroupStatus mandatory

This attributes defines the status of the Xswitch module.
The value 'loadsBudgetProblem' indicates that the module cannot be connected to the
Xswitch because it exceeds the maximum number of loads allowed in the Xswitc…

Enumeration

Enumerated Values:

1	ok
2	loadsBudgetProblem
255	notSupported

.1.3.6.1.4.1.81.28.1.3.1.1.5

scGenGroupSwitchType mandatory

This attribute defines the Xswitch type of the module.

Enumeration

Enumerated Values:

1	ethernet
2	token-ring
255	notSupported

.1.3.6.1.4.1.81.28.1.3.1.1.6

scGenGroupNumberOfLoads mandatory

This attribute identifies the number of loads which that Xswitch module represents.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.81.28.1.3.1.1.7

scGenGroupSetDefaults mandatory

Set all module and ports parameters in the XSwitch module, to their default values.
This item will always return a value of off(2), since it acts like a toggle switch.
Set of layer2Only(3) value, will cause partial sett…

Enumerationr/w

Enumerated Values:

1	on
2	off
3	layer2Only
255	notSupported

.1.3.6.1.4.1.81.28.1.3.1.1.8

scGenGroupSupportCopyPortList mandatory

A bitmap defining the status of each port of the hub\module whether it support copy
port or not,
0 - the port does not support copy port
1 - the port support the copy port
the list should start with the MSB indicat…

OctetString

.1.3.6.1.4.1.81.28.1.3.1.1.9

scGenGroupSupportPortCountersList mandatory

A bitmap defining the status of each port of the hub\module whether it supports
the port's counters,
0 - the port does not support port's counters
1 - the port support the port's counters
the list should start wit…

OctetString

.1.3.6.1.4.1.81.28.1.3.1.1.10

scGenGroupSupportSegCountersList mandatory

A bitmap defining the status of each port of the hub\module whether it supports
the segment counters on port,
0 - the port does not support segment's counters
1 - the port support the segment's counters
the list sh…

OctetString

.1.3.6.1.4.1.81.28.1.3.1.1.11

scGenGroupUpLinkType mandatory

The type of the Up Link port
Relevant only for the 25th port of Visage 2500:
Fiber (1) - 100BaseFX,
Copper (2) -100BaseTX.

Enumerationr/w

Enumerated Values:

1	fiber
2	copper
255	notSupported

.1.3.6.1.4.1.81.28.1.3.1.1.12

scGenGroupPlugInType mandatory

Attribute describing the type of the plug-in module

Enumeration

Enumerated Values:

1	cajunX120T8
2	cajunX120F2
3	cajunX120S1
4	cajunX120S2
5	cajunX120L1
6	cajunX120L2
7	cajunX120T16
8	cajunX120F4
9	cajunX120G2
10	cajunX120GT2
11	cajunX330T16
12	cajunX330F4
13	cajunX330F2
14	cajunX330L2
15	cajunX330S2
16	cajunX330L1
17	cajunX330S1
18	cajunX330-OC12F1
19	cajunX330-OC12F2
20	cajunX330-OC3F1
21	cajunX330-OC3F2
22	cajunX330-OC12S1
23	cajunX330-OC12S2
24	cajunX330GT4
25	cajunX330GT2
26	cajunX330G2
27	cajunX330W-4DS1
28	cajunX330W-2DS1
31	cajunX130F2
32	cajunX130G2
33	cajunX130GT2
34	x330w-2ds1
35	x330w-2usp
36	x330w-2ds1-isdn
37	x330w-2usp-isdn
38	x330w-future1
39	x330w-future2
40	x330w-future3
41	x330w-future4
42	x330w-future5
43	x330w-future6
44	x330w-future7
45	x330w-future8
46	x330w-future9
254	unknown
255	none

.1.3.6.1.4.1.81.28.1.3.1.1.13

scGenGroupPlugInDescr mandatory

Descriptor of the plug-in in ASCII (readable) format,
mainly for use with Generic management applications.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.81.28.1.3.1.1.14

scGenGroupPlugInCS mandatory

ASCII string for description and display of the plug-in
module configuration symbol. The format of the number is XXXX.YY

RFC1213-MIBDisplayString

Textual Convention: RFC1213-MIBDisplayString OctetString

.1.3.6.1.4.1.81.28.1.3.1.1.15

scGenGroupDefaultVLAN mandatory

Attribute describing the Default VLAN configuration on the switch ports of the module.
It is determined according to scGenSwitchDefaultVLAN parameter of the agent.

Enumeration

Enumerated Values:

1	vlan0
2	vlan1
255	notSupported

.1.3.6.1.4.1.81.28.1.3.1.1.16

scGenGroupCascadingType mandatory

Attribute describing the type of the cascding module

Enumeration

Enumerated Values:

1	cajunX330STK
2	cajunX330MLSTK
3	avayaX360STK
254	unknown
255	none

.1.3.6.1.4.1.81.28.1.3.1.1.17

scGenGroupCascadingDescr mandatory

Descriptor of the cascading module in ASCII (readable) format,
mainly for use with Generic management applications.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.81.28.1.3.1.1.18

scGenGroupCascadingCS mandatory

ASCII string for description and display of the cascading module
configuration symbol. The format of the number is XXX.YYY

RFC1213-MIBDisplayString

Textual Convention: RFC1213-MIBDisplayString OctetString

.1.3.6.1.4.1.81.28.1.3.1.1.19

scGenGroupSupportDstCopyPortList mandatory

A bitmap defining the status of each port of the hub\module
whether it supports the capability of being a destination copy-port .
1 - the port has the capability of being a destination copy-port
0 - the port doe…

OctetString

.1.3.6.1.4.1.81.28.1.3.1.1.20

scGenGroupBUPSType mandatory

Attribute describing the type of the BUPS module

Enumeration

Enumerated Values:

1	ac
2	dc
255	none

.1.3.6.1.4.1.81.28.1.3.1.1.21

scGenGroupBUPSCS mandatory

ASCII string for description and display of the BUPS
module configuration symbol. The format of the number is X.Y

RFC1213-MIBDisplayString

Textual Convention: RFC1213-MIBDisplayString OctetString

.1.3.6.1.4.1.81.28.1.3.1.1.22

scGenGroupBUPSFansStatus mandatory

The operational status of the fans included in the BUPS module:
allFansOK(1) - all BUPS module's fans are operational.
oneFanFailed(2) - at least one of the BUPS module's fan is failed.

Enumeration

Enumerated Values:

1	allFansOK
2	oneFanFailed
255	notSupported

.1.3.6.1.4.1.81.28.1.3.1.1.23

scGenGroupFansStatus mandatory

The operational status of the fans included in the module:
allFansOK(1) - all module's fans are operational.
oneFanFailed(2) - at least one of the module's fan is failed.

Enumeration

Enumerated Values:

1	allFansOK
2	oneFanFailed
255	notSupported

.1.3.6.1.4.1.81.28.1.3.1.1.24

scGenGroupInternalBuffering mandatory

Control the internal buffering capacity.

Enumerationr/w

Enumerated Values:

1	min
2	max
3	med
255	notSupported

.1.3.6.1.4.1.81.28.1.3.1.1.25

scGenGroupMcFilterBoxSupport mandatory

Tells whether the box hardware supports filtering or not.

Enumeration

Enumerated Values:

1	filteringSupported
2	filterNotSupport
255	notSupported

.1.3.6.1.4.1.81.28.1.3.1.1.26

scGenGroupMcFilterPersonalitySupport mandatory

Tells whether the personality hardware supports filtering or not.
The value PersonalityNotInstalld means that the a personality
Extention was not installed in the specific box

Enumeration

Enumerated Values:

1	filteringSupported
2	filterNotSupport
3	personalityNotInstalled
255	notSupported

.1.3.6.1.4.1.81.28.1.3.1.1.27

scGenGroupMcFilterStackingSupport mandatory

Tells whether the stacking hardware supports filtering or not
The value StackingNotInstalld means that the a stacking daughter board
was not installed in the specific box

Enumeration

Enumerated Values:

1	filteringSupported
2	filterNotSupport
3	stackingNotInstalled
255	notSupported

.1.3.6.1.4.1.81.28.1.3.1.1.28

scGenGroupLACPMode mandatory

The value of this attribute determines whether LACPDU messages can be exchanged by the module's ports.
If enabled, the ports will exchange LACPDU messages according to their scGenPortLACPMode MIB.
If disabled, every por…

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.81.28.1.3.1.1.29

scGenGroupSecurityMode mandatory

Group intrusion security mode assigned to this module.
securityMode - all ports in this module are secure according to their scGenPortSecurityMode MIB's value.
nonSecurityMode - all ports in this module are not se…

Enumerationr/w

Enumerated Values:

1	nonSecurityMode
2	securityMode
255	notSupported

.1.3.6.1.4.1.81.28.1.3.1.1.30

scGenGroupBroadcastStormControl mandatory

Set the Broadcast Storm Control function on all switch ports.
On means that Broadcast, Multicast or Unknown packets are discarded on an ingress port,
when the rate of those packets, received on the port,
is above the sc…

Enumerationr/w

Enumerated Values:

1	on
2	off
255	notSupported

.1.3.6.1.4.1.81.28.1.3.1.1.31

scGenGroupBroadcastThreshold mandatory

Set the Rate Threshold, in packets per second, above which Broadcast,
Multicast or Unknown packets are discarded on ingress port.

Integer32r/w

Constraints:
range: 10-144000

.1.3.6.1.4.1.81.28.1.3.1.1.32

scGenGroupPriorityQueuesScheduling mandatory

Set the Priority Queues Scheduling scheme for packets transmission from egress ports.
Strict - will serve higher priority queue before lower priority queue, as long as the higher queue has packets.
Weighted - will serve…

Enumerationr/w

Enumerated Values:

1	strict
2	weighted
255	notSupported

.1.3.6.1.4.1.81.28.1.3.1.1.33

scGenGroupBoundedDelay mandatory

Set the Bounded Delay function in the switch.
On will ensure that time-sensitive packets will be forwarded
through the switch in no more than a maximum delay.

Enumerationr/w

Enumerated Values:

1	on
2	off
255	notSupported

.1.3.6.1.4.1.81.28.1.3.1.1.34

scGenGroupSLDAdminStatus mandatory

set the Self Loop Discovery application to enable/disable.
This works with the scGenPortSLDAdminStatus

Enumerationr/w

Enumerated Values:

1	enable
2	disable
255	notSupported

.1.3.6.1.4.1.81.28.1.3.1.1.35

scGenGroupDynamicVlans mandatory

Indicates the number of dynamic vlans detected in the module so far.
If this value is set to zero, all dynamic vlans detected up to this time will be deleted.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.3.1.1.36

scGenGroupSecurityMacCount mandatory

Indicates the number of secure MAC assigned to this module so far. The value should be
0 if the secure MAC table is empty for this module.

Integer32

Constraints:
range: 1-1024

.1.3.6.1.4.1.81.28.1.3.1.1.37

scGenGroupBUPSAllocatedPower mandatory

Indicates the total 48V BUPS power that is allocated to this module in Watts.

Integer32r/w

Constraints:
range: 100-900

.1.3.6.1.4.1.81.28.1.3.1.1.38

scGenGroupSmonTable

table mandatory

.1.3.6.1.4.1.81.28.1.3.2 · 1 row entry · 13 columns

Open in standard view

Table of smon capabilities in a single group.

scGenGroupSmonEntry entry .1.3.6.1.4.1.81.28.1.3.2.1

An entry in the table, containing data about
a single Group.

Indexes

scGenGroupSmonGroupId

Column Syntax OID

scGenGroupSmonGroupId mandatory

Unique Id of the group in the scGenGroupSmonTable.
Equals the number of the slot by which the group
is accessed.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.3.2.1.1

scGenGroupSmonCapability mandatory

This item is used to define which smon's application are
implemented in the group.
When there is a value of 0 (zero) in the relevant bit
it means that the assosiated application is not supported.
When there is a value…

OctetString

Constraints:
range: 4-4

.1.3.6.1.4.1.81.28.1.3.2.1.2

scGenGroupSmonVlanList mandatory

OctetString

Constraints:
range: 32-32

.1.3.6.1.4.1.81.28.1.3.2.1.3

scGenGroupSmonDropEvents mandatory

The total number of events ,in this group, in which the
probe could not count packets due to lack of resources.
This number is not necessarily the number of packets
dropped; it is just the number of times this conditio…

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.1.3.2.1.4

scGenGroupSmonGoodBroadcastPkts mandatory

The total number of good broadcast packets in this group,
switched by the Xswitch.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.1.3.2.1.5

scGenGroupSmonGoodMulticastPkts mandatory

The total number of good multicast packets, in this group,
switched by the Xswitch.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.1.3.2.1.6

scGenGroupSmonGoodPkts mandatory

The total number of good packets, in this group, switched by the Xswitch.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.1.3.2.1.7

scGenGroupSmonBadPkts mandatory

The total number of bad packets , in this group, filtered by the Xswitch.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.1.3.2.1.8

scGenGroupSmonGoodOctets mandatory

The total number of good octets, in this group, switched by the Xswitch.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.1.3.2.1.9

scGenGroupSmonBadOctets mandatory

The total number of bad octets, in this group, filtered by the Xswitch.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.1.3.2.1.10

scGenGroupSmonPkts mandatory

The total number of packets, good and bad, in this group,
switched by the Xswitch.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.1.3.2.1.11

scGenGroupSmonOctets mandatory

The total number of octets, good and bad, in this group,
switched by the Xswitch.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.1.3.2.1.12

scGenGroupSmonMIBCtrMode mandatory

This object defines for group ports to include/exclude
local segment traffic in their port counters

Enumerationr/w

Enumerated Values:

1	enable
2	disable
255	notSupported

.1.3.6.1.4.1.81.28.1.3.2.1.13

scGenGroupVlanTable

table mandatory

.1.3.6.1.4.1.81.28.1.3.3 · 1 row entry · 14 columns

Open in standard view

Table of attributes which define general VLAN 
counters of a single SC based group.

scGenGroupVlanEntry entry .1.3.6.1.4.1.81.28.1.3.3.1

An entry in the table, containing VLAN counters in a single Group.

Indexes

scGenGroupVlanGroupId scGenGroupVlanId

Column	Syntax	OID
scGenGroupVlanGroupId mandatory Unique Id of the group in the scGenGroupVlanTable. Equals the number of the slot by which the group is accessed.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.81.28.1.3.3.1.1`
scGenGroupVlanId mandatory The Virtual LAN for which this entry contains information.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.81.28.1.3.3.1.2`
scGenGroupVlanUcastPkts mandatory The total number of good unicast packets ,in this group, switched by the Xswitch on this Virtual LAN.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.81.28.1.3.3.1.3`
scGenGroupVlanMcastPkts mandatory The total number of good multicast packets ,in this group, switched by the Xswitch on this Virtual LAN.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.81.28.1.3.3.1.4`
scGenGroupVlanBcastPkts mandatory The total number of good broadcast packets in this group, switched by the Xswitch on this Virtual LAN.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.81.28.1.3.3.1.5`
scGenGroupVlanGoodPkts mandatory The total number of good packets ,in this group, switched by the Xswitch on this Virtual LAN.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.81.28.1.3.3.1.6`
scGenGroupVlanGoodOctets mandatory The total number of good octets ,in this group, switched by the Xswitch on this Virtual LAN.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.81.28.1.3.3.1.7`
scGenGroupVlanUcastOctets mandatory The total number of good unicast octets ,in this group, switched by the Xswitch on this Virtual LAN.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.81.28.1.3.3.1.8`
scGenGroupVlanMcastOctets mandatory The total number of good multicast octets ,in this group, switched by the Xswitch on this Virtual LAN.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.81.28.1.3.3.1.9`
scGenGroupVlanBcastOctets mandatory The total number of good broadcast octets ,in this group, switched by the Xswitch on this Virtual LAN.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.81.28.1.3.3.1.10`
scGenGroupVlanCurrentEgressPorts mandatory The set of ports in this module which are transmitting traffic for this vlan as either tagged or untagged frames. Each module's port is represented by a single bit in this 128-bits bitmap according to the PortL…	OctetString	`.1.3.6.1.4.1.81.28.1.3.3.1.11`
scGenGroupVlanCurrentUntaggedPorts mandatory The set of ports which are transmitting traffic for this VLAN as untagged frames. Each module's port is represented by a single bit in this 128-bits bitmap according to the PortList convention of RFC2674. This …	OctetString	`.1.3.6.1.4.1.81.28.1.3.3.1.12`
scGenGroupVlanStaticEgressPorts mandatory The set of ports in this module which are permanently assigned to the egress list for this VLAN by management. Each module's port is represented by a single bit in this 128-bits bitmap according to the PortList …	OctetStringr/w	`.1.3.6.1.4.1.81.28.1.3.3.1.13`
scGenGroupVlanStaticUntaggedPorts mandatory The set of ports which should transmit egress packets for this VLAN as untagged. Each module's port is represented by a single bit in this 128-bits bitmap according to the PortList convention of RFC2674. The defaul…	OctetStringr/w	`.1.3.6.1.4.1.81.28.1.3.3.1.14`

scGenGroupRspTable

table mandatory

.1.3.6.1.4.1.81.28.1.3.4 · 1 row entry · 12 columns

Open in standard view

scGenGroupRspEntry entry .1.3.6.1.4.1.81.28.1.3.4.1

Indexes

scGenGroupRspGroupId

Column Syntax OID

scGenGroupRspGroupId mandatory

Unique Id of the group in the scGenGroupRspTable.
Equals the number of the slot by which the group is accessed.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.3.4.1.1

scGenGroupRspHelloInterval mandatory

The interval between transmissions of hello-messages, in 100mSec units.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.3.4.1.2

scGenGroupRspDevicePollingInterval mandatory

The interval between transmissions of ARP queries for polling
connectivity to the device, in 100mSec units.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.3.4.1.3

scGenGroupRspDeviceNotRespondingTimeout mandatory

Amount of time in which no ARP-replies are received from the device,
which cause the RSP to assume no connection to that device, in 100mSec units.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.3.4.1.4

scGenGroupRspSwitchNotRespondingTimeout mandatory

Amount of time in which no hello-messages with acknowledge are received from the other switch,
which cause the RSP to assume no connection to that switch, in 100mSec units.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.3.4.1.5

scGenGroupRspMoveToForwardingInterval mandatory

Amount of time the port waits upon deciding to move to forwarding mode,
until it moves to that mode, in 100mSec units.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.3.4.1.6

scGenGroupRspBroadcastArpShortInterval mandatory

The interval in which the switch should send broadcast ARPs to the device
when not knowing the MAC-address of the device, in 100mSec units.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.3.4.1.7

scGenGroupRspBroadcastArpShortIntervalNumber mandatory

The number of broadcast ARPs the switch should send in short interval time,
when not knowing the MAC address of the device

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.3.4.1.8

scGenGroupRspBroadcastArpLongInterval mandatory

The interval in which the switch should send broadcast ARPs to the device
when the device does not respond to unicast ARPs, in 100mSec units.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.3.4.1.9

scGenGroupRspPeriodicPingsBoxIpAddress mandatory

This MIB-item is the IP-address that the P330 box uses in order to periodically ping to devices
Default value for IP Address is 0.0.0.0

RFC1155-SMIIpAddressr/w

Textual Convention: RFC1155-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.81.28.1.3.4.1.10

scGenGroupRspPeriodicPingsDestinationIpAddress mandatory

This MIB-item sets an IpAddress that the devices will be configured to periodically ping to.
The switch will be responsible to reply to ARP-queries concerning this IP-address,
and which were issued by devices directly…

RFC1155-SMIIpAddressr/w

Textual Convention: RFC1155-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.81.28.1.3.4.1.11

scGenGroupRspMode mandatory

Sets the mode of the module from the RSP-application prespective. Possible modes are:
RSP-module-mode-role-A - means that the ports of this module perform the
RSP scheme for a device connected through a repeater, in ro…

Enumerationr/w

Enumerated Values:

1	rsp-module-mode-role-A
2	rsp-modue-mode-role-B
255	notSupported

.1.3.6.1.4.1.81.28.1.3.4.1.12

scGenGroupDot1xTable

table mandatory

.1.3.6.1.4.1.81.28.1.3.5 · 1 row entry · 5 columns

Open in standard view

This table includes additional information for the extension of 802.1x multi-supplicant
mode.

scGenGroupDot1xEntry entry .1.3.6.1.4.1.81.28.1.3.5.1

This entry includes information about 802.1x supplicants connected to
a device/module.

Indexes

scGenGroupDot1xGroupId

Column	Syntax	OID
scGenGroupDot1xGroupId mandatory Unique Id of the group in the scGenGroupRspTable. Equals the number of the slot by which the group is accessed.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.81.28.1.3.5.1.1`
scGenGroupDot1xSystemMaxNumSupplicant mandatory The total number of supplicants allowed in the specific group.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.81.28.1.3.5.1.2`
scGenGroupDot1xCurrentNumSupplicant mandatory The total number of supplicants connected in the specific group.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.81.28.1.3.5.1.3`
scGenGroupDot1xCurrentNumAuthenticatedSupplicant mandatory The total number of authenticated supplicants connected in the specific group.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.81.28.1.3.5.1.4`
scGenGroupDot1xCurrentNumAuthenticatingSupplicant mandatory The total number of authenticating supplicants connected in the specific group.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.81.28.1.3.5.1.5`

scGenPortTable

table mandatory

.1.3.6.1.4.1.81.28.1.4.1 · 1 row entry · 25 columns

Open in standard view

Table of attributes which define general configuration 
information about a single SC based port.

scGenPortEntry entry .1.3.6.1.4.1.81.28.1.4.1.1

An entry in the table, containing data about a single Port.

Indexes

scGenPortGroupId scGenPortId

Column Syntax OID

scGenPortGroupId mandatory

Id of the group to which the port belongs.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.4.1.1.1

scGenPortId mandatory

Unique Id of the port in the scEthPortTable.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.4.1.1.2

scGenPortVLAN mandatory

The Virtual LAN number of the Port.
The value 0 means Generic ( But can communicate with Global !).
The value '255' means Global.

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.81.28.1.4.1.1.3

scGenPortPriority mandatory

The priority level of the packets send by the Port.

Enumerationr/w

Enumerated Values:

1	regular
2	high
3	userPriority1
4	userPriority2
5	userPriority3
6	userPriority4
7	userPriority5
8	userPriority6
9	userPriority7
10	userPriority8
255	notSupported

.1.3.6.1.4.1.81.28.1.4.1.1.4

scGenPortSetDefaults mandatory

Set all port parameters in the XSwitch module, to their default values.
This item is used for ports that are managed by Sub-agents.
This item will always return a value of off(2), since it acts
like a toggle switch.

Enumerationr/w

Enumerated Values:

1	on
2	off
255	notSupported

.1.3.6.1.4.1.81.28.1.4.1.1.5

scGenPortBackbone mandatory

The type of the Xswitch port. 'on' indicates that the port was discovered
by VIDP as backbone port.

Enumeration

Enumerated Values:

1	on
2	off
255	notSupported

.1.3.6.1.4.1.81.28.1.4.1.1.6

scGenPortCopyMode mandatory

Enable /Disable the Copy Port mode in the Sub-Agent.

Enumerationr/w

Enumerated Values:

1	enable
2	disable
255	notSupported

.1.3.6.1.4.1.81.28.1.4.1.1.7

scGenPortCopyDestination mandatory

The destination of the copied information.
The destination can be another port or the Agent acting as an RMON probe.
The value of this item is: LSB Byte= sniffer channel number,
Next Byte= sniffer device number.
Wh…

Integer32r/w

Constraints:
range: 0-8092

.1.3.6.1.4.1.81.28.1.4.1.1.8

scGenPortLinkAggregationNumber mandatory

The Link Aggregation Group (LAG) number, to which the Port belongs.
The value 0 means that this port is not part of a LAG. This is also the default.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.81.28.1.4.1.1.9

scGenPortSendBridgedPackets mandatory

When set to on(1), the port will transmit to the line bridged frames
(for which their secondary VLAN was 0xFFE internally).
This is the case for ports connected to a station or to another switch
that has no bridging cap…

Enumerationr/w

Enumerated Values:

1	on
2	off
255	notSupported

.1.3.6.1.4.1.81.28.1.4.1.1.10

scGenPortVLANEgressStaticConfiguration mandatory

A bitmap defining the VLANs, for which the port is member in their Egress Tables.
The first bit is for VLAN 0, the second bit for VLAN 1, and so on.
If the port is member in the Egress Table of a specified VLAN,
then th…

OctetStringr/w

Constraints:
range: 32-32

.1.3.6.1.4.1.81.28.1.4.1.1.11

scGenPortStaticVLANBinding mandatory

This object defines whether Static VLAN Binding is enabled or disabled on the port.
If enabled, the port is member in the Egress List of the VLANs, as specified in
scGenPortVLANEgressStaticConfiguration, in addition to…

Enumerationr/w

Enumerated Values:

1	enable
2	disable
255	notSupported

.1.3.6.1.4.1.81.28.1.4.1.1.12

scGenPortSecId mandatory

The identification number (per module) of the switching chip to which the port belongs.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.81.28.1.4.1.1.13

scGenPortMaxLagsOnSec mandatory

The theoretic maximum number of LAGs that can be defined over the switching chip to which the port
belongs. The value is fixed according to the switching chip type:
For the Timpani chip, the value is 1.
For the Guitar c…

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.81.28.1.4.1.1.14

scGenPortGenericTrap mandatory

The value of this attribute determines whether or not the agent sends the snmp generic traps 2 and 3,
for link down/up events on this port.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.81.28.1.4.1.1.15

scGenPortLACPMode mandatory

The value of this attribute determines whether the port exchanges LACPDU messages,
in agreement with the scGenGroupLACPMode MIB.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.81.28.1.4.1.1.16

scGenPortLastIntruderSourceAddr mandatory

Ethernet source address of the last intrusion attempt at this port.
The value of this item will be 000000 (a string of 6 zeros) if security mode is
disable or no security violation at this port.

OctetString

Constraints:
range: 0-1

.1.3.6.1.4.1.81.28.1.4.1.1.17

scGenPortSecurityMode mandatory

Security mode assigned to this port.
nonSecurityMode - do not perform intrusion control security mechanism on this port.
securityMode - perform intrusion control security mechanism and trap the console
in case of secur…

Enumerationr/w

Enumerated Values:

1	nonSecurityMode
2	securityMode
255	notSupported

.1.3.6.1.4.1.81.28.1.4.1.1.18

scGenPortSTA mandatory

Enable /Disable the Spanning Tree protocol for this port,
meaningless when disabled at the switch level via the scGenSwitchSTA MIB.

Enumerationr/w

Enumerated Values:

1	enable
2	disable
255	notSupported

.1.3.6.1.4.1.81.28.1.4.1.1.19

scGenPortLagCapability mandatory

An octet string with the size of the maximum number of LAGs on the device.
Each bit represents a LAG which the port may be associated with (a member of).

OctetString

.1.3.6.1.4.1.81.28.1.4.1.1.20

scGenPortCapability mandatory

Port capability bit mask, where each bit represent the capability of the port:
Bit #1 - 10Mbps speed support
Bit #2 - 100Mbps speed support
Bit #3 - 1000Mbps speed support
Bit #4 - 10000Mbps speed support
…

OctetString

.1.3.6.1.4.1.81.28.1.4.1.1.21

scGenPortSLDAdminStatus mandatory

Sets the admin status of each port in the Self Loop Discovery application
A port which is disbaled does not send LDDU . A port which is enabled sends
LDDU and migth turn to blocking if a SLD is discovered.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.81.28.1.4.1.1.22

scGenPortSLDStatus mandatory

A port which is SLDEnabled can be in SelfLoop or NoSelfLoop mode .
if the port is SLD disabled it will return notSupported.

Enumeration

Enumerated Values:

1	selfLoop
2	noSelfLoop
255	notSupported

.1.3.6.1.4.1.81.28.1.4.1.1.23

scGenPortCopyClassModuleLevel mandatory

This variable indicates the class of each kind of port on any kind
of module for COPY PORT command at the module level. This MIB is defined
for module level copy ports.
This string is made of 16 bits. Each bit indicate…

OctetString

.1.3.6.1.4.1.81.28.1.4.1.1.24

scGenPortCopyClassStackLevel mandatory

The first bit of this string indicates whether the requested port may
be copied to another port in the stack or not.
When a module is requested to copy a port to another module's port,
it answers whether the port is cap…

OctetString

.1.3.6.1.4.1.81.28.1.4.1.1.25

scGenPortRspTable

table mandatory

.1.3.6.1.4.1.81.28.1.4.2 · 1 row entry · 3 columns

Open in standard view

Table of attributes which define general configuration 
information about a single SC based port.

scGenPortRspEntry entry .1.3.6.1.4.1.81.28.1.4.2.1

An entry in the table, containing data about a single Port.

Indexes

scGenPortRspGroupId scGenPortRspId

Column Syntax OID

scGenPortRspGroupId mandatory

Id of the group to which the port belongs.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.4.2.1.1

scGenPortRspId mandatory

Unique Id of the port in the scGenPortRspTable.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.4.2.1.2

scGenPortRspMode mandatory

Sets the mode of the port from the RSP-application perspective. Possible modes are:
Regular - means that this is a regular port that does not participate in the RSP scheme,
RSP-mode-role-A - means that this port perform…

Enumerationr/w

Enumerated Values:

1	regular
2	rsp-mode-role-A
3	rsp-mode-role-B
4	device-mode
255	notSupported

.1.3.6.1.4.1.81.28.1.4.2.1.3

scGenPortSecureMACTable

table mandatory

.1.3.6.1.4.1.81.28.1.4.3 · 1 row entry · 4 columns

Open in standard view

Table of Secure MAC list for a single SC based port.

scGenPortSecureMACEntry entry .1.3.6.1.4.1.81.28.1.4.3.1

Indexes

scGenPortSecureGroupID scGenPortSecurePortId scGenPortSecureMAC

Column Syntax OID

scGenPortSecureGroupID mandatory

Unique Id of the group in the scGenGroupSecureMACTable.
Equals the number of the slot by which the group is accessed.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.81.28.1.4.3.1.1

scGenPortSecurePortId mandatory

Integer32

Constraints:
range: 1-1024

.1.3.6.1.4.1.81.28.1.4.3.1.2

scGenPortSecureMAC mandatory

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.81.28.1.4.3.1.3

scGenPortSecureMACStatus mandatory

This variable defines the status of the row.
The values of this variables are defined and handled,
according to the definitions in the IETF draft:
Row creation with SNMPv1, from 19 October 1993.
The createAndGo value …

RowStatusr/w

Textual Convention: RowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.81.28.1.4.3.1.4

scGenPortDot1xMACTable

table mandatory

.1.3.6.1.4.1.81.28.1.4.4 · 1 row entry · 6 columns

Open in standard view

Table of 802.1x multi/single supplicant MACs connected to a single SC based port.

scGenPortDot1xMACEntry entry .1.3.6.1.4.1.81.28.1.4.4.1

Indexes

scGenPortDot1xMACGroupID scGenPortDot1xMACPortId scGenPortDot1xMAC

Column Syntax OID

scGenPortDot1xMACGroupID mandatory

Unique Id of the group in the scGenGroupDot1xMACTable.
Equals the number of the slot by which the group is accessed.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.81.28.1.4.4.1.1

scGenPortDot1xMACPortId mandatory

Integer32

Constraints:
range: 1-1024

.1.3.6.1.4.1.81.28.1.4.4.1.2

scGenPortDot1xMAC mandatory

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.81.28.1.4.4.1.3

scGenPortDot1xMACAuthPaeState mandatory

The current value of the 802.1x multi/single supplicant MAC/port state
machine. The MIB is identical to the dot1xAuthPaeState from IEEE8021-PAE-MIB.

Enumeration

Enumerated Values:

1	initialize
2	disconnected
3	connecting
4	authenticating
5	authenticated
6	aborting
7	held
8	forceAuth
9	forceUnauth

.1.3.6.1.4.1.81.28.1.4.4.1.4

scGenPortDot1xMACAuthBackendAuthState mandatory

The current state of the Backend Authentication
state machine for the relevant 802.1x multi/single supplicant MAC/port.
The MIB is identical to the dot1xAuthBackendAuthState from IEEE8021-PAE-MIB.

Enumeration

Enumerated Values:

1	request
2	response
3	success
4	fail
5	timeout
6	idle
7	initialize

.1.3.6.1.4.1.81.28.1.4.4.1.5

scGenPortDot1xAuthAuthControlledPortStatus mandatory

The current value of the controlled 802.1x single-supplicant MAC
status parameter for the MAC.
The MIB is identical to the dot1xAuthAuthControlledPortStatus
from IEEE8021-PAE-MIB.
Note in multi supplicant this MIB retu…

IEEE8021-PAE-MIBPaeControlledPortStatus

Textual Convention: IEEE8021-PAE-MIBPaeControlledPortStatus Enumeration

Type Values:

1	authorized
2	unauthorized

.1.3.6.1.4.1.81.28.1.4.4.1.6

scGenPortDot1xPortTable

table mandatory

.1.3.6.1.4.1.81.28.1.4.5 · 1 row entry · 6 columns

Open in standard view

Table of 802.1x multi-supplicant configuration and status of 
a single SC based port.

scGenPortDot1xPortEntry entry .1.3.6.1.4.1.81.28.1.4.5.1

Indexes

scGenPortDot1xPortGroupID scGenPortDot1xPortPortId

Column Syntax OID

scGenPortDot1xPortGroupID mandatory

Unique Id of the group in the scGenGroupDot1xPortTable.
Equals the number of the slot by which the group is accessed.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.81.28.1.4.5.1.1

scGenPortDot1xPortPortId mandatory

Integer32

Constraints:
range: 1-1024

.1.3.6.1.4.1.81.28.1.4.5.1.2

scGenPortDot1xPortMode mandatory

The authentication method used for the port.
Port-Based-Authentication is used for the standard single supplicant mode.
MAC-Based-Authentication is used for the multi supplicant mode to support
a few supplicants conn…

Enumerationr/w

Enumerated Values:

1	port
2	mac

.1.3.6.1.4.1.81.28.1.4.5.1.3

scGenPortDot1xPortNumSupplicants mandatory

Total number of supplicants connected to the port.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.4.5.1.4

scGenPortDot1xPortNumAuthenticatedSupplicants mandatory

Total number of authenticated supplicants connected to the port.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.4.5.1.5

scGenPortDot1xPortNumAuthenticatingSupplicants mandatory

Total number of authenticating supplicants connected to the port. I.e. clients
which are not authenticated yet.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.4.5.1.6

scGenSwitchTable

table mandatory

.1.3.6.1.4.1.81.28.1.5.1 · 1 row entry · 38 columns

Open in standard view

Table of attributes which define information about 
a single XSwitch in SC based devices.

scGenSwitchEntry entry .1.3.6.1.4.1.81.28.1.5.1.1

An entry in the table, containing data about a single XSwitch.

Indexes

scGenSwitchId

Column Syntax OID

scGenSwitchId mandatory

Index which identifies the XSwitch for which this entry contains information.
This value is never greater than chNumberOfXSwitches.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.81.28.1.5.1.1.1

scGenSwitchCopyMode mandatory

Enable /Disable the Copy Port mode in the XSwitch.

Enumerationr/w

Enumerated Values:

1	enable
2	disable
255	notSupported

.1.3.6.1.4.1.81.28.1.5.1.1.2

scGenSwitchCopySource mandatory

The port in the switch that is being copied.
All received and transmit packets on the port( including local traffic ) are copied to
the defined destination, besides their normal destination.
The value of this item is: …

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.5.1.1.3

scGenSwitchCopyDestination mandatory

The destination of the copied information.
The destination can be another port or the Agent acting as an RMON probe.
The value of this item is: 1024*S+P,
where S is the slot number in the hub and P is the port within …

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.5.1.1.4

scGenSwitchSetDefaults mandatory

Set all port parameters in the XSwitch, to their default values.
This item will always return a value of off(2), since it acts like a toggle switch.

Enumerationr/w

Enumerated Values:

1	on
2	off
255	notSupported

.1.3.6.1.4.1.81.28.1.5.1.1.5

scGenSwitchVIDP mandatory

Enable /Disable the VIDP protocol supported in the XSwitch.

Enumerationr/w

Enumerated Values:

1	enable
2	disable
255	notSupported

.1.3.6.1.4.1.81.28.1.5.1.1.6

scGenSwitchType mandatory

This attribute defines the type of the Xswitch.

Enumeration

Enumerated Values:

1	ethernet
2	token-ring
255	notSupported

.1.3.6.1.4.1.81.28.1.5.1.1.7

scGenSwitchMasterId mandatory

This attribute defines which module in the Xswitch take the role of the Master.
It is equal to the slot number of the Xswitch Master.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.81.28.1.5.1.1.8

scGenSwitchReset mandatory

Setting this attribute to `on' will cause a reset to the Xswitch. Default value is 'off'.

Enumerationr/w

Enumerated Values:

1	on
2	off
255	notSupported

.1.3.6.1.4.1.81.28.1.5.1.1.9

scGenSwitchNumberOfLoads mandatory

This attribute identifies the total number of loads of that Xswitch.
There is a maximum budget of 30 loads on an single Xswitch.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.81.28.1.5.1.1.10

scGenSwitchAgVLAN mandatory

The Virtual LAN number of the Agent's internal interface in the switch.
The value 0 means Generic (But can communicate with Global !).
The value '255' means Global.

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.81.28.1.5.1.1.11

scGenSwitchVLANList mandatory

OctetString

Constraints:
range: 32-32

.1.3.6.1.4.1.81.28.1.5.1.1.12

scGenSwitchSTA mandatory

Enable /Disable the Spanning Tree protocol support in the switch.

Enumerationr/w

Enumerated Values:

1	enable
2	disable
255	notSupported

.1.3.6.1.4.1.81.28.1.5.1.1.13

scGenSwitchSecurityMode mandatory

This item defines the Security mode per stack.
nonSecurityMode - all ports in the stack are not secure.
securityMode - all ports in the stack are secure according to their scGenPortSecurityMode MIB's value.

Enumerationr/w

Enumerated Values:

1	nonSecurityMode
2	securityMode
255	notSupported

.1.3.6.1.4.1.81.28.1.5.1.1.14

scGenSwitchFindQuery mandatory

An address to be searched for by the Agent.
The Agent will start look for the address when the value is
different than Null.
The string format is:
1st byte: address type - 0=MAC, 1=IP
Next bytes: the address. (for MAC…

OctetStringr/w

.1.3.6.1.4.1.81.28.1.5.1.1.15

scGenSwitchFindResult mandatory

The search result. The result string format is:
1st byte: address type - 0=MAC, 1=IP.
Next bytes: the address. (for MAC: next 6 bytes,
for IP: next 4 bytes)
7-th byte (for MAC) or 5-th byte (for IP): number of ports wi…

OctetString

.1.3.6.1.4.1.81.28.1.5.1.1.16

scGenSwitchSWRdChange mandatory

A 4-byte octet-string indicating a change performed by the SW Redundancy task.
The string will include:
Byte 1: Group1 (module number).
Byte 2 : Port1
Byte 3 : Group2
Byte 4 : port2
Where group2 port2 are the new en…

OctetStringr/w

.1.3.6.1.4.1.81.28.1.5.1.1.17

scGenSwitchDefaultVLAN mandatory

Attribute describing the Default VLAN configuration on the switch ports.
The user may change the value of this parameter through the setup terminal.
Vlan1 is the standard default VLAN for port configuration.

Enumeration

Enumerated Values:

1	vlan0
2	vlan1
255	notSupported

.1.3.6.1.4.1.81.28.1.5.1.1.18

scGenSwitchVLANBridging mandatory

VLAN Bridging mode should be enabled in all Xswitches in the network, when the user
wants to support network-wide VLAN Bridging. VLAN Bridging should also be enabled
in one M-MLS, and PLS-Tagging mode should be set on t…

Enumerationr/w

Enumerated Values:

1	enable
2	disable
255	notSupported

.1.3.6.1.4.1.81.28.1.5.1.1.19

scGenSwitchOldVersionModules mandatory

A list of modules, in ASCII format, that have older software versions than
necessary in the switch. Module numbers are separated by a comma and a space.
It is used to inform the user on version inconsistency.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.81.28.1.5.1.1.20

scGenSwitchVIDPNonSupportedModules mandatory

A list of modules, in ASCII format, that do not support the VIDP function.
Module numbers are separated by a comma and a space.
It is used to inform the user on possible problems in VIDP function,
as not all modules in…

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.81.28.1.5.1.1.21

scGenSwitchSTANonSupportedModules mandatory

A list of modules, in ASCII format, that do not support the STA function.
Module numbers are separated by a comma and a space.
It is used to inform the user on possible problems in STA function,
as not all modules in th…

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.81.28.1.5.1.1.22

scGenSwitchIDSNonSupportedModules mandatory

A list of modules, in ASCII format, that do not support the IDS function.
Module numbers are separated by a comma and a space.
It is used to inform the user on possible problems in IDS function,
as not all modules in th…

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.81.28.1.5.1.1.23

scGenSwitchMcFilter mandatory

Enable/disable the multicast filtering mechanism supported in the switch

Enumerationr/w

Enumerated Values:

1	enable
2	disable
255	notSupported

.1.3.6.1.4.1.81.28.1.5.1.1.24

scGenSwitchMcFilterHostAgingTime mandatory

The Value of the Host-Aging-Time parameter used by the multicast filtering
mechanism for aging learned multicast filtering information

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.5.1.1.25

scGenSwitchMcFilterRouterAgingTime mandatory

The Value of the Router-Aging-Time parameter used by the multicast filtering
mechanism for aging learned router-ports information

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.5.1.1.26

scGenSwitchMcFilterDelayTime mandatory

The Value of the Delay-Time parameter used by the multicast filtering
mechanism for waiting to all registration requests before applying a filter
on a specific group

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.5.1.1.27

scGenSwitchLACPMode mandatory

The value of this attribute determines whether LACPDU messages can be exchanged by the switch's ports.
If enabled, the ports will exchange LACPDU messages according to their scGenPortLACPMode MIB.
If disabled, every por…

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.81.28.1.5.1.1.28

scGenSwitchSecurityModePermit mandatory

This item defines the Security mode per switch.
This MIB is encoded in AVAYA specific security mechanism.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.5.1.1.29

scGenSwitchFastAgingOnRemoteTopChg mandatory

This item defines if the switch performs fast aging on the MAC address
forwarding database (or reset the cam contents) upon reception of
Topology Change BPDU from the STA root, indicating that a remote
topology change…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
255	notSupported

.1.3.6.1.4.1.81.28.1.5.1.1.30

scGenSwitchGigaMode mandatory

The value of this attribute determines the setting for the two Giga links of a P130 stack.

Enumerationr/w

Enumerated Values:

1	regular
2	link-load-sharing
3	primary-bottom
4	primary-top

.1.3.6.1.4.1.81.28.1.5.1.1.31

scGenSwitchCAMClear mandatory

When value sets to on(1), the switch clears its CAM table.
This item will always return a value of off(2), since it acts like a toggle switch.

Enumerationr/w

Enumerated Values:

1	on
2	off
255	notSupported

.1.3.6.1.4.1.81.28.1.5.1.1.32

scGenSwitchWelcomeMessage mandatory

The textual message of the welcome message that should be displayed upon
power on or telneting to the system.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.81.28.1.5.1.1.33

scGenSwitchPromptMessage mandatory

The textual message of the Prompt message that should be displayed.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.81.28.1.5.1.1.34

scGenSwitchMacAging mandatory

Enable/Disable filtering database entries (MAC) aging

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.81.28.1.5.1.1.35

scGenSwitchSecurityAction mandatory

Specifies global security violation action.
Drop - drop intruder packets for 5 seconds.
dropAndNotify - Drop and notify.
shutdownAndNotify - Administratively Disable port (forever) and notify.

Enumerationr/w

Enumerated Values:

1	drop
2	dropAndNotify
3	shutdownAndNotify

.1.3.6.1.4.1.81.28.1.5.1.1.36

scGenSwitchDot1xPortMaxSuppNum mandatory

Maximum number of supplicant allowed per port.
Possible values 1-8.
DEFAULT is 2.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.5.1.1.37

scGenSwitchDot1xLldpTxVlanName mandatory

This MIB item includes additional information for the extension of 802.1x
multi-supplicant mode and LLDP application.
If this MIB is Enable and if there was authentication on one
of the ports on the device and:
1. If…

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.81.28.1.5.1.1.38

scGenLinkAggregationTable

table mandatory

.1.3.6.1.4.1.81.28.1.6.1 · 1 row entry · 11 columns

Open in standard view

Table of attributes which define Link Aggregation Group in a single switch.

scGenLinkAggregationEntry entry .1.3.6.1.4.1.81.28.1.6.1.1

An entry in the table, containing LAG information in a single switch.

Indexes

scGenLinkAggregationId

Column Syntax OID

scGenLinkAggregationId mandatory

The Link Aggregation number for which this entry contains information.

Integer32

Constraints:
range: 1-100

.1.3.6.1.4.1.81.28.1.6.1.1.1

scGenLinkAggregationName mandatory

The Link Aggregation name, given by the user.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.81.28.1.6.1.1.2

scGenLinkAggregationBasePortGroupId mandatory

The slot/unit number of the Base Port for this Link Aggregation.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.6.1.1.3

scGenLinkAggregationBasePortId mandatory

The port number in the slot/unit of the Base Port for this Link Aggregation.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.6.1.1.4

scGenLinkAggregationNumberOfPorts mandatory

The current number of ports that belong to this Link Aggregation.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.6.1.1.5

scGenLinkAggregationLogicalPortGroupId mandatory

The slot number of the logical port, representing this Link Aggregation.
All parameters for the LAG are managed through that logical port.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.6.1.1.6

scGenLinkAggregationLogicalPortId mandatory

The logical port number in the slot, representing this Link Aggregation.
All parameters for the LAG are managed through that logical port.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.1.6.1.1.7

scGenLinkAggregationFunctionalStatus mandatory

The functional status of the LAG:
ok(1) - fully functional LAG, transmitting and receiving packets on all its ports.
fail(2) - all ports in the LAG are not in ok status.
partialFail(3) - some of the ports in the LAG ar…

Enumeration

Enumerated Values:

1	ok
2	fail
3	partialFail
255	notSupported

.1.3.6.1.4.1.81.28.1.6.1.1.8

scGenLinkAggregationAutoNegResults mandatory

The auto-negotiation results for speed and duplex for the LAG ports:
ok(1) - all ports resolved the same speed and duplex mode after auto-negotiation process.
autoNegInconsistantResults(2) - not all ports resolved the s…

Enumeration

Enumerated Values:

1	ok
2	autoNegInconsistantResults
255	notSupported

.1.3.6.1.4.1.81.28.1.6.1.1.9

scGenLinkAggregationFaultMask mandatory

Each bit of this item describes the situation of the LAG
regarding specific fault:
bit 1: on indicates 'LAG connection lost' when
scGenLinkAggregationFunctionalStatus=fail(2)
bit 2: on indicates 'LAG partial co…

OctetString

.1.3.6.1.4.1.81.28.1.6.1.1.10

scGenLinkAggregationStatus mandatory

The status of this scGenLinkAggregation entry. According to RMON-2 standard (RFC 2021).

RowStatusr/w

Textual Convention: RowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.81.28.1.6.1.1.11

scGenPortIPAddressRspTable

table mandatory

.1.3.6.1.4.1.81.28.1.7.1 · 1 row entry · 4 columns

Open in standard view

Table of attributes which define general configuration 
information about a single SC based port.

scGenPortIPAddressRspEntry entry .1.3.6.1.4.1.81.28.1.7.1.1

An entry in the table, containing data about a single Port.

Indexes

scGenPortIPAddressRspGroupId scGenPortIPAddressRspPortId scGenPortIPAddressRspIpAddressIndex

Column	Syntax	OID
scGenPortIPAddressRspGroupId mandatory Id of the group to which the port belongs.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.81.28.1.7.1.1.1`
scGenPortIPAddressRspPortId mandatory Unique Id of the port in the scGenPortRspTable.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.81.28.1.7.1.1.2`
scGenPortIPAddressRspIpAddressIndex mandatory Unique Id of the port in the scGenPortRspTable.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.81.28.1.7.1.1.3`
scGenPortIPAddressRspIpAddress mandatory This MIB-item sets an IpAddress of a station that is connected to a port that performs RSP. A value of 0.0.0.0 in this Mib Item means that it does not describe an existing IpAddress. Default value is 0.0.0.0	RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.81.28.1.7.1.1.4`

scEthPortTable

table mandatory

.1.3.6.1.4.1.81.28.2.1.1 · 1 row entry · 47 columns

Open in standard view

Table of attributes which define configuration, 
performance and error information about ethernet
ports based on the switchChip.

scEthPortEntry entry .1.3.6.1.4.1.81.28.2.1.1.1

An entry in the table, containing data about a single port.

Indexes

scEthPortGroupId scEthPortId

Column Syntax OID

scEthPortGroupId mandatory

Id of the group to which the port belongs.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.2.1.1.1.1

scEthPortId mandatory

Unique Id of the port in the scEthPortTable.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.2.1.1.1.2

scEthPortOctetsRec mandatory

The total number of good octets received and bad octets
filtered by the port (excluding framing bits but including
FCS octets).
This item is the summation of scEthPortGoodOctetsRec
and scEthPortBadOctets.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.3

scEthPortPktsRec mandatory

The total number of good packets received and bad
packets filtered by the port.
This item is the summation of scEthPortGoodPktsRec
and scEthPortBadPkts.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.4

scEthPortGoodBroadcastPktsRec mandatory

The total number of good packets received that were
directed to the broadcast address.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.5

scEthPortGoodMulticastPktsRec mandatory

The total number of good packets received that were
directed to a multicast address.
Note that this number does not include packets directed to
the broadcast address.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.6

scEthPortCRCAlignErrors mandatory

The total number of packets received that had a length
(excluding framing bits, but including FCS octets) of
between 64 and 1518 octets, inclusive, but were not an
integral number of octets in length or had a bad Fra…

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.7

scEthPortOversizePkts mandatory

The total number of packets received that were longer
than 1518 octets (excluding framing bits, but including
FCS octets) and were otherwise well formed.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.8

scEthPortFragments mandatory

The total number of packets received that were less than 64 octets in
length (excluding framing bits but including FCS octets).

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.9

scEthPortJabber mandatory

The total number of packets received that were longer
than 1518 octets (excluding framing bits, but including
FCS octets), and were not an integral number of octets in
length or had a bad Frame Check Sequence (FCS).

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.10

scEthPortCollisions mandatory

The best estimate of the total number of collisions on this
Ethernet segment.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.11

scEthPortPkts64Octets mandatory

The total number of packets (including error packets)
that were 64 octets in length (excluding framing
bits but including FCS octets).

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.12

scEthPortPkts65to127Octets mandatory

The total number of packets (including error packets)
that were between 65 and 127 octets in length
inclusive (excluding framing bits but including FCS
octets).

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.13

scEthPortPkts128to255Octets mandatory

The total number of packets (including error packets)
that were between 128 and 255 octets in length
inclusive (excluding framing bits but including FCS
octets).

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.14

scEthPortPkts256to511Octets mandatory

The total number of packets (including error packets)
that were between 256 and 511 octets in length
inclusive (excluding framing bits but including FCS
octets).

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.15

scEthPortPkts512to1023Octets mandatory

The total number of packets (including error packets)
that were between 512 and 1023 octets in length
inclusive (excluding framing bits but including FCS
octets).

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.16

scEthPortPkts1024to1518Octets mandatory

The total number of packets (including error packets)
that were between 1024 and 1518 octets in length
inclusive (excluding framing bits but including FCS
octets).

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.17

scEthPortGoodPktsRec mandatory

The total number of good packets received by the port.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.18

scEthPortBadPkts mandatory

The total number of bad packets filtered by the port.
This item is the summation of:
scEthPortCRCAlignErrors, scEthPortOversizePkts,

scEthPortFragments and scEthPortJabber.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.19

scEthPortGoodOctetsRec mandatory

The total number of good octets of data received by the port.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.20

scEthPortBadOctets mandatory

The total number of bad octets of data filtered by the port.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.21

scEthPortGoodBroadcastOctetsRec mandatory

The total number of good octets received that were
directed to the broadcast address.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.22

scEthPortGoodMulticastOctetsRec mandatory

The total number of good octets received that were
directed to a multicast address. Note that this number does
not include octets directed to the broadcast address.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.23

scEthPortGoodOctetsSent mandatory

The total number of good octets of data sent by the port.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.24

scEthPortGoodPktsSent mandatory

The total number of good packets sent by the port.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.25

scEthPortLateCollisions mandatory

The best estimate of the total number of late collisions on
this Ethernet segment.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.26

scEthPortFunctionalStatus mandatory

The functional status of the port:
ok(1) - fully functional port, transmitting and receiving
packets.
rld(2) - receive link down condition on the port - Indicates
a cable or connector failure detected by the port H/W…

Enumeration

Enumerated Values:

1	ok
2	rld
3	rxJabber
8	partition
10	remoteFault
11	rspError
255	notSupported

.1.3.6.1.4.1.81.28.2.1.1.1.27

scEthPortMode mandatory

The flow control mode of the port when operated in full duplex:
halfDuplex(1) - Half duplex connection, standard mode for segment
fullDuplexNoPause(2) - Full duplex connection without exchanging flow control packets
ful…

Enumerationr/w

Enumerated Values:

1	halfDuplex
2	fullDuplexNoPause
3	fullDuplexProprietaryFC
4	fullDuplexISL
5	fullDuplexFlowControlISL
6	fullDuplexAsymTxPause
7	fullDuplexSymPause
8	fullDuplexAsymRxPause
255	notSupported

.1.3.6.1.4.1.81.28.2.1.1.1.28

scEthPortSpeed mandatory

This parameter defines the port speed:
ethernet(1) and fastEthernet(2).

Enumerationr/w

Enumerated Values:

1	ethernet
2	fastEthernet
3	gigabitEthernet
4	a155Mbps
5	a622Mbps
255	notSupported

.1.3.6.1.4.1.81.28.2.1.1.1.29

scEthPortAutoNegotiation mandatory

This object define if the Auto Sense /Auto Negotiation
process is enable(1) or disable (2)
for modules that don't support the Auto Snese mode
please define the notSupported option..

Enumerationr/w

Enumerated Values:

1	enable
2	disable
255	notSupported

.1.3.6.1.4.1.81.28.2.1.1.1.30

scEthPortAutoNegotiationStatus mandatory

This object define the status of the Auto Negotiation process:
pass: The Auto negotiation process was completed and succeeded .
fail: The Auto Negotiation process failed .
disable: The Auto Negotiation process is not…

Enumeration

Enumerated Values:

1	pass
2	fail
3	disable
4	inProgress
255	notSupported

.1.3.6.1.4.1.81.28.2.1.1.1.31

scEthPortTotalOctets mandatory

The total number of octets received and transmitted on
the port (including all good and bad).
This item is the summation of scEthPortOctetsRec
and scEthPortGoodOctetsSent.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.32

scEthPortTotalPkts mandatory

The total number of packets received and transmitted on
the port (including all good and bad).
This item is the summation of scEthPortPktsRec
and scEthPortGoodPktsSent.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.33

scEthPortDropEvents mandatory

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.34

scEthPortGigaPauseStatus mandatory

Indicates the status of the Flow Control as determined in the Auto Negotiation process on the
Gigabit ports:
noPause(1) indicates that there is no Flow Control.
symmetricPause(2) indicates that both sides are working i…

Enumeration

Enumerated Values:

1	noPause
2	symmetricPause
3	asymmetricPauseRx
255	notSupported

.1.3.6.1.4.1.81.28.2.1.1.1.35

scEthPortLower32OctetsRec mandatory

Lower 32 bit conter of the total number of octets of data received by the port.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.36

scEthPortUpper32OctetsRec mandatory

Upper 32 bit conter of the total number of octets of data received by the port.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.37

scEthPortLower32OctetsSent mandatory

Lower 32 bit conter of the total number of octets of data sent by the port.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.38

scEthPortUpper32OctetsSent mandatory

Upper 32 bit conter of the total number of octets of data sent by the port.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.39

scEthPortGoodUnicastPktsRec mandatory

The total number of good packets received that were directed to a unicast address.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.40

scEthPortDiscardPktsRec mandatory

The total number of packets which were chosen to be discarded even
though no errors had been detected to prevent their being deliverable
to a higher-layer protocol. One possible reason for discarding such
a packet could…

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.41

scEthPortUnicastPktsSent mandatory

The total number of good packets sent by the port
that were directed to a unicast address.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.42

scEthPortDiscardPktsSent mandatory

The total number of packets which were chosen to be discarded even though no errors
had been detected to prevent their being transmitted.
One possible reason for discarding such a packet could be to free up buffer space.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.43

scEthPortPauseCapabilities mandatory

The Pause capabilities of a Giga port that should be advertised to the link
partner when performing auto-negotiation:
noFlowControl (1) - no flow control support in any direction
asymTxFlowControlOnly (2) - STD 802.3x f…

Enumerationr/w

Enumerated Values:

1	noFlowControl
2	asymTxFlowControlOnly
3	symFlowControlOnly
4	symAndAsymRxFlowControl
255	notSupported

.1.3.6.1.4.1.81.28.2.1.1.1.44

scEthPortMulticastPktsSent mandatory

The total number of good packets sent by the port that were directed to a multicast address.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.45

scEthPortUndersizePktsRec mandatory

The total number of packets received that were less than 64 octets long (excluding framing
bits, but including FCS octets) and were otherwise well formed.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.81.28.2.1.1.1.46

scEthPortFlowControl mandatory

The flow control mode of the port

Enumerationr/w

Enumerated Values:

1	noFlowControl
2	asymTxFlowControl
3	symFlowControl
4	asymRxFlowControl
5	proprietaryFlowControl
255	notSupported

.1.3.6.1.4.1.81.28.2.1.1.1.47

scEthGroupTable

table mandatory

.1.3.6.1.4.1.81.28.2.2.1 · 1 row entry · 4 columns

Open in standard view

Table of attributes which define ethernet configuration 
information about a single SC based group.

scEthGroupEntry entry .1.3.6.1.4.1.81.28.2.2.1.1

An entry in the table, containing data about a single Group.

Indexes

scEthGroupId

Column Syntax OID

scEthGroupId mandatory

Unique Id of the group in the scEthGroupTable.
Equals the number of the slot by which the group is accessed.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.2.2.1.1.1

scEthGroupAutoPartitionEnable mandatory

Enables/Disables the Auto-Partition mechanism in all ports of this module.

Enumerationr/w

Enumerated Values:

1	enable
2	disable
255	notSupported

.1.3.6.1.4.1.81.28.2.2.1.1.2

scEthGroupFefiEnable mandatory

This item enables\disables the FEFI mechanism of all Fast-Ethernet
PHY's in the module. It enables\disables both the transmission and
the recognition of FEFI signals.

Enumerationr/w

Enumerated Values:

1	enable
2	disable
255	notSupported

.1.3.6.1.4.1.81.28.2.2.1.1.3

scPowerEthGroupInlineSWversion mandatory

Indicates the Powerinline image version of the groupID module.

OctetString

Constraints:
range: 0-10

.1.3.6.1.4.1.81.28.2.2.1.1.4

scPowerEthGroupTable

table mandatory

.1.3.6.1.4.1.81.28.3.1 · 1 row entry · 3 columns

Open in standard view

Table of attributes which define general configuration 
information about a single SC based port.

scPowerEthGroupEntry entry .1.3.6.1.4.1.81.28.3.1.1

An entry in the table, containing data about a single Port.

Indexes

scPowerEthGroupId

Column Syntax OID

scPowerEthGroupId mandatory

Id of the group to which the port belongs.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.81.28.3.1.1.1

scPowerEthGroupPsePSPowerFaultErrMsg mandatory

Free text informing a main power failure.

RFC1213-MIBDisplayString

Textual Convention: RFC1213-MIBDisplayString OctetString

.1.3.6.1.4.1.81.28.3.1.1.2

scPowerEthGroupPseDetectionProcess mandatory

This object specifies the detection process used by PD.
Resistive investigates the line for resistive type load,
Capacitive investigates the line for a capacitive load,
and both detects for a resistive type first, the…

Enumerationr/w

Enumerated Values:

1	resistive
2	capacitive
3	both

.1.3.6.1.4.1.81.28.3.1.1.3

scPowerEthPortTable

table mandatory

.1.3.6.1.4.1.81.28.3.2 · 1 row entry · 3 columns

Open in standard view

Table of additional information about PoE ports.

scPowerEthPortEntry entry .1.3.6.1.4.1.81.28.3.2.1

An entry in the table, containing data about a single Port.

Indexes

scPowerEthPortGroupId scPowerEthPortPortId

Column	Syntax	OID
scPowerEthPortGroupId mandatory Id of the group to which the port belongs.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.81.28.3.2.1.1`
scPowerEthPortPortId mandatory Id of the port in the relevant group.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.81.28.3.2.1.2`
scPowerEthPortConsumptionPower mandatory Indicates the amount of power consumption in mWatts for the specific port.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.81.28.3.2.1.3`

scPriorityQueuingTable

table mandatory

.1.3.6.1.4.1.81.28.4.1 · 1 row entry · 6 columns

Open in standard view

The Priority Queuing table controls the queuing mode
of the switch ports. This table is arranged by module
so that the queuing parameters are set on per module id.

scPriorityQueuingEntry entry .1.3.6.1.4.1.81.28.4.1.1

An entry in the table, containing data about a single module.

Indexes

scPriorityQueuingModuleID

Column Syntax OID

scPriorityQueuingModuleID mandatory

Module number - position of a module in the stack
or a slot within a modular chassis.

Integer32

Constraints:
range: 1-21

.1.3.6.1.4.1.81.28.4.1.1.1

scPriorityQueuingNumberOfQueues mandatory

Number of Priority queues supported by corrsponding module.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.81.28.4.1.1.2

scPriorityQueuingExpediteWRRFlg mandatory

When yes - supports an expedite queuing mode.
In expedite mode the highest priority queue is serviced
until it is empty and only then WRR queues are served.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.81.28.4.1.1.3

scPriorityQueuingModeControl mandatory

Queuing operational mode.

Strict - in strict mode the low priority egress queues
are serviced only after the higher priority queue is emptied.

WRR mode - the egress queues serviced accordin…

Enumerationr/w

Enumerated Values:

1	strictMode
2	wrrMode
3	expediteMode

.1.3.6.1.4.1.81.28.4.1.1.4

scPriorityQueuingDefaultControl mandatory

Setting this value to on(1) returns queuing mode
to default values.

Should return off(2)if the default values are overwritten.

Activating Default control affects the values read from the
sc…

Enumerationr/w

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.81.28.4.1.1.5

scPriorityQueuingWRRWeights mandatory

The array of weights ordered by weight for priority 0 in
position 1 and weight for priority 7 is in position 8.

The number of elements in the array should match the number
of queues defined by scPriority…

OctetStringr/w

Constraints:
range: 1-8

.1.3.6.1.4.1.81.28.4.1.1.6