scGenPortSecId
XSWITCH-MIB ·
.1.3.6.1.4.1.81.28.1.4.1.1.13
Object
column
mandatory
Integer32
The identification number (per module) of the switching chip to which the port belongs.
Context
- MIB
- XSWITCH-MIB
- OID
.1.3.6.1.4.1.81.28.1.4.1.1.13- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- scGenPortEntry
- Table
- scGenPortTable
- Siblings
- 24
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| scGenPortGroupId mandatory Id of the group to which the port belongs. | column | Integer32 | .1.3.6.1.4.1.81.28.1.4.1.1.1 |
| scGenPortSendBridgedPackets mandatory When set to on(1), the port will transmit to the line bridged frames
(for which their secondary VLAN was 0xFFE internally).
This is the case for ports connected to a station or to… | column | Enumeration | .1.3.6.1.4.1.81.28.1.4.1.1.10 |
| scGenPortVLANEgressStaticConfiguration mandatory A bitmap defining the VLANs, for which the port is member in their Egress Tables.
The first bit is for VLAN 0, the second bit for VLAN 1, and so on.
If the port is member in the E… | column | OctetString | .1.3.6.1.4.1.81.28.1.4.1.1.11 |
| scGenPortStaticVLANBinding mandatory This object defines whether Static VLAN Binding is enabled or disabled on the port.
If enabled, the port is member in the Egress List of the VLANs, as specified in
scGenPortVLANE… | column | Enumeration | .1.3.6.1.4.1.81.28.1.4.1.1.12 |
| scGenPortMaxLagsOnSec mandatory The theoretic maximum number of LAGs that can be defined over the switching chip to which the port
belongs. The value is fixed according to the switching chip type:
For the Timpan… | column | Integer32 | .1.3.6.1.4.1.81.28.1.4.1.1.14 |
| scGenPortGenericTrap mandatory The value of this attribute determines whether or not the agent sends the snmp generic traps 2 and 3,
for link down/up events on this port. | column | Enumeration | .1.3.6.1.4.1.81.28.1.4.1.1.15 |
| scGenPortLACPMode mandatory The value of this attribute determines whether the port exchanges LACPDU messages,
in agreement with the scGenGroupLACPMode MIB. | column | Enumeration | .1.3.6.1.4.1.81.28.1.4.1.1.16 |
| scGenPortLastIntruderSourceAddr mandatory Ethernet source address of the last intrusion attempt at this port.
The value of this item will be 000000 (a string of 6 zeros) if security mode is
disable or no security violati… | column | OctetString | .1.3.6.1.4.1.81.28.1.4.1.1.17 |
| scGenPortSecurityMode mandatory Security mode assigned to this port.
nonSecurityMode - do not perform intrusion control security mechanism on this port.
securityMode - perform intrusion control security mechanis… | column | Enumeration | .1.3.6.1.4.1.81.28.1.4.1.1.18 |
| scGenPortSTA mandatory Enable /Disable the Spanning Tree protocol for this port,
meaningless when disabled at the switch level via the scGenSwitchSTA MIB. | column | Enumeration | .1.3.6.1.4.1.81.28.1.4.1.1.19 |
| scGenPortId mandatory Unique Id of the port in the scEthPortTable. | column | Integer32 | .1.3.6.1.4.1.81.28.1.4.1.1.2 |
| scGenPortLagCapability mandatory An octet string with the size of the maximum number of LAGs on the device.
Each bit represents a LAG which the port may be associated with (a member of). | column | OctetString | .1.3.6.1.4.1.81.28.1.4.1.1.20 |
| scGenPortCapability mandatory Port capability bit mask, where each bit represent the capability of the port:
Bit #1 - 10Mbps speed support
Bit #2 - 100Mbps speed support
Bit #3 - 1000Mbps speed support
Bit #4 … | column | OctetString | .1.3.6.1.4.1.81.28.1.4.1.1.21 |
| scGenPortSLDAdminStatus mandatory Sets the admin status of each port in the Self Loop Discovery application
A port which is disbaled does not send LDDU . A port which is enabled sends
LDDU and migth turn to blo… | column | Enumeration | .1.3.6.1.4.1.81.28.1.4.1.1.22 |
| scGenPortSLDStatus mandatory A port which is SLDEnabled can be in SelfLoop or NoSelfLoop mode .
if the port is SLD disabled it will return notSupported. | column | Enumeration | .1.3.6.1.4.1.81.28.1.4.1.1.23 |
| scGenPortCopyClassModuleLevel mandatory This variable indicates the class of each kind of port on any kind
of module for COPY PORT command at the module level. This MIB is defined
for module level copy ports.
This stri… | column | OctetString | .1.3.6.1.4.1.81.28.1.4.1.1.24 |
| scGenPortCopyClassStackLevel mandatory The first bit of this string indicates whether the requested port may
be copied to another port in the stack or not.
When a module is requested to copy a port to another module's … | column | OctetString | .1.3.6.1.4.1.81.28.1.4.1.1.25 |
| scGenPortVLAN mandatory The Virtual LAN number of the Port.
The value 0 means Generic ( But can communicate with Global !).
The value '255' means Global. | column | Integer32 | .1.3.6.1.4.1.81.28.1.4.1.1.3 |
| scGenPortPriority mandatory The priority level of the packets send by the Port. | column | Enumeration | .1.3.6.1.4.1.81.28.1.4.1.1.4 |
| scGenPortSetDefaults mandatory Set all port parameters in the XSwitch module, to their default values.
This item is used for ports that are managed by Sub-agents.
This item will always return a value of off(2),… | column | Enumeration | .1.3.6.1.4.1.81.28.1.4.1.1.5 |
| scGenPortBackbone mandatory The type of the Xswitch port. 'on' indicates that the port was discovered
by VIDP as backbone port. | column | Enumeration | .1.3.6.1.4.1.81.28.1.4.1.1.6 |
| scGenPortCopyMode mandatory Enable /Disable the Copy Port mode in the Sub-Agent. | column | Enumeration | .1.3.6.1.4.1.81.28.1.4.1.1.7 |
| scGenPortCopyDestination mandatory The destination of the copied information.
The destination can be another port or the Agent acting as an RMON probe.
The value of this item is: LSB Byte= sniffer channel number,
… | column | Integer32 | .1.3.6.1.4.1.81.28.1.4.1.1.8 |
| scGenPortLinkAggregationNumber mandatory The Link Aggregation Group (LAG) number, to which the Port belongs.
The value 0 means that this port is not part of a LAG. This is also the default. | column | Integer32 | .1.3.6.1.4.1.81.28.1.4.1.1.9 |