scGenGroupPriorityQueuesScheduling
XSWITCH-MIB ·
.1.3.6.1.4.1.81.28.1.3.1.1.33
Object
column
mandatory
r/w
Enumeration
Set the Priority Queues Scheduling scheme for packets transmission from egress ports. Strict - will serve higher priority queue before lower priority queue, as long as the higher queue has packets. Weighted - will serve higher priority queue before lower priority queue, but will save specific bandwidth for each queue in order to avoid starvation of lower priority queues.
Context
- MIB
- XSWITCH-MIB
- OID
.1.3.6.1.4.1.81.28.1.3.1.1.33- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- scGenGroupEntry
- Table
- scGenGroupTable
- Siblings
- 37
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | strict |
2 | weighted |
255 | notSupported |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| scGenGroupId mandatory Unique Id of the group in the scGenGroupTable.
Equals the number of the slot by which the group is accessed. | column | Integer32 | .1.3.6.1.4.1.81.28.1.3.1.1.1 |
| scGenGroupSupportPortCountersList mandatory A bitmap defining the status of each port of the hub\module whether it supports
the port's counters,
0 - the port does not support port's counters
1 - the port support the p… | column | OctetString | .1.3.6.1.4.1.81.28.1.3.1.1.10 |
| scGenGroupSupportSegCountersList mandatory A bitmap defining the status of each port of the hub\module whether it supports
the segment counters on port,
0 - the port does not support segment's counters
1 - the port su… | column | OctetString | .1.3.6.1.4.1.81.28.1.3.1.1.11 |
| scGenGroupUpLinkType mandatory The type of the Up Link port
Relevant only for the 25th port of Visage 2500:
Fiber (1) - 100BaseFX,
Copper (2) -100BaseTX. | column | Enumeration | .1.3.6.1.4.1.81.28.1.3.1.1.12 |
| scGenGroupPlugInType mandatory Attribute describing the type of the plug-in module | column | Enumeration | .1.3.6.1.4.1.81.28.1.3.1.1.13 |
| scGenGroupPlugInDescr mandatory Descriptor of the plug-in in ASCII (readable) format,
mainly for use with Generic management applications. | column | OctetString | .1.3.6.1.4.1.81.28.1.3.1.1.14 |
| scGenGroupPlugInCS mandatory ASCII string for description and display of the plug-in
module configuration symbol. The format of the number is XXXX.YY | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.81.28.1.3.1.1.15 |
| scGenGroupDefaultVLAN mandatory Attribute describing the Default VLAN configuration on the switch ports of the module.
It is determined according to scGenSwitchDefaultVLAN parameter of the agent. | column | Enumeration | .1.3.6.1.4.1.81.28.1.3.1.1.16 |
| scGenGroupCascadingType mandatory Attribute describing the type of the cascding module | column | Enumeration | .1.3.6.1.4.1.81.28.1.3.1.1.17 |
| scGenGroupCascadingDescr mandatory Descriptor of the cascading module in ASCII (readable) format,
mainly for use with Generic management applications. | column | OctetString | .1.3.6.1.4.1.81.28.1.3.1.1.18 |
| scGenGroupCascadingCS mandatory ASCII string for description and display of the cascading module
configuration symbol. The format of the number is XXX.YYY | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.81.28.1.3.1.1.19 |
| scGenGroupUseSwitches mandatory This attribute reflects the status of the `Use Switches' switch which
defines the working mode of the module.
on - The module works according to the switches. No Set commands
may… | column | Enumeration | .1.3.6.1.4.1.81.28.1.3.1.1.2 |
| scGenGroupSupportDstCopyPortList mandatory A bitmap defining the status of each port of the hub\module
whether it supports the capability of being a destination copy-port .
1 - the port has the capability of being a d… | column | OctetString | .1.3.6.1.4.1.81.28.1.3.1.1.20 |
| scGenGroupBUPSType mandatory Attribute describing the type of the BUPS module | column | Enumeration | .1.3.6.1.4.1.81.28.1.3.1.1.21 |
| scGenGroupBUPSCS mandatory ASCII string for description and display of the BUPS
module configuration symbol. The format of the number is X.Y | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.81.28.1.3.1.1.22 |
| scGenGroupBUPSFansStatus mandatory The operational status of the fans included in the BUPS module:
allFansOK(1) - all BUPS module's fans are operational.
oneFanFailed(2) - at least one of the BUPS module's fan is f… | column | Enumeration | .1.3.6.1.4.1.81.28.1.3.1.1.23 |
| scGenGroupFansStatus mandatory The operational status of the fans included in the module:
allFansOK(1) - all module's fans are operational.
oneFanFailed(2) - at least one of the module's fan is failed. | column | Enumeration | .1.3.6.1.4.1.81.28.1.3.1.1.24 |
| scGenGroupInternalBuffering mandatory Control the internal buffering capacity. | column | Enumeration | .1.3.6.1.4.1.81.28.1.3.1.1.25 |
| scGenGroupMcFilterBoxSupport mandatory Tells whether the box hardware supports filtering or not. | column | Enumeration | .1.3.6.1.4.1.81.28.1.3.1.1.26 |
| scGenGroupMcFilterPersonalitySupport mandatory Tells whether the personality hardware supports filtering or not.
The value PersonalityNotInstalld means that the a personality
Extention was not installed in the specific box | column | Enumeration | .1.3.6.1.4.1.81.28.1.3.1.1.27 |
| scGenGroupMcFilterStackingSupport mandatory Tells whether the stacking hardware supports filtering or not
The value StackingNotInstalld means that the a stacking daughter board
was not installed in the specific box | column | Enumeration | .1.3.6.1.4.1.81.28.1.3.1.1.28 |
| scGenGroupLACPMode mandatory The value of this attribute determines whether LACPDU messages can be exchanged by the module's ports.
If enabled, the ports will exchange LACPDU messages according to their scGen… | column | Enumeration | .1.3.6.1.4.1.81.28.1.3.1.1.29 |
| scGenGroupCopyPortSupport mandatory Indication whether a module supports Copy-Port [on(1)],
or does not support Copy-Port [off(2)]. | column | Enumeration | .1.3.6.1.4.1.81.28.1.3.1.1.3 |
| scGenGroupSecurityMode mandatory Group intrusion security mode assigned to this module.
securityMode - all ports in this module are secure according to their scGenPortSecurityMode MIB's value.
nonSecurityMo… | column | Enumeration | .1.3.6.1.4.1.81.28.1.3.1.1.30 |
| scGenGroupBroadcastStormControl mandatory Set the Broadcast Storm Control function on all switch ports.
On means that Broadcast, Multicast or Unknown packets are discarded on an ingress port,
when the rate of those packet… | column | Enumeration | .1.3.6.1.4.1.81.28.1.3.1.1.31 |
| scGenGroupBroadcastThreshold mandatory Set the Rate Threshold, in packets per second, above which Broadcast,
Multicast or Unknown packets are discarded on ingress port. | column | Integer32 | .1.3.6.1.4.1.81.28.1.3.1.1.32 |
| scGenGroupBoundedDelay mandatory Set the Bounded Delay function in the switch.
On will ensure that time-sensitive packets will be forwarded
through the switch in no more than a maximum delay. | column | Enumeration | .1.3.6.1.4.1.81.28.1.3.1.1.34 |
| scGenGroupSLDAdminStatus mandatory set the Self Loop Discovery application to enable/disable.
This works with the scGenPortSLDAdminStatus | column | Enumeration | .1.3.6.1.4.1.81.28.1.3.1.1.35 |
| scGenGroupDynamicVlans mandatory Indicates the number of dynamic vlans detected in the module so far.
If this value is set to zero, all dynamic vlans detected up to this time will be deleted. | column | Integer32 | .1.3.6.1.4.1.81.28.1.3.1.1.36 |
| scGenGroupSecurityMacCount mandatory Indicates the number of secure MAC assigned to this module so far. The value should be
0 if the secure MAC table is empty for this module. | column | Integer32 | .1.3.6.1.4.1.81.28.1.3.1.1.37 |
| scGenGroupBUPSAllocatedPower mandatory Indicates the total 48V BUPS power that is allocated to this module in Watts. | column | Integer32 | .1.3.6.1.4.1.81.28.1.3.1.1.38 |
| scGenGroupXswitchConnection mandatory This attribute identifies the Xswitch number (1..4) to which the module
is connected to.
In non-bridged configuration, there are potentialy up to 4 Xswitches -
1&2 for left&right… | column | Integer32 | .1.3.6.1.4.1.81.28.1.3.1.1.4 |
| scGenGroupStatus mandatory This attributes defines the status of the Xswitch module.
The value 'loadsBudgetProblem' indicates that the module cannot be connected to the
Xswitch because it exceeds the maxim… | column | Enumeration | .1.3.6.1.4.1.81.28.1.3.1.1.5 |
| scGenGroupSwitchType mandatory This attribute defines the Xswitch type of the module. | column | Enumeration | .1.3.6.1.4.1.81.28.1.3.1.1.6 |
| scGenGroupNumberOfLoads mandatory This attribute identifies the number of loads which that Xswitch module represents. | column | Integer32 | .1.3.6.1.4.1.81.28.1.3.1.1.7 |
| scGenGroupSetDefaults mandatory Set all module and ports parameters in the XSwitch module, to their default values.
This item will always return a value of off(2), since it acts like a toggle switch.
Set of laye… | column | Enumeration | .1.3.6.1.4.1.81.28.1.3.1.1.8 |
| scGenGroupSupportCopyPortList mandatory A bitmap defining the status of each port of the hub\module whether it support copy
port or not,
0 - the port does not support copy port
1 - the port support the copy port
th… | column | OctetString | .1.3.6.1.4.1.81.28.1.3.1.1.9 |